Sany Sy35 V-Črpalka Za Čiščenje Jarkov In Jarkov nakup rabljenega (137.766)

Leto izdelave: 2023, stanje: novo, 1. Trapezno vedro (ali kanalizacijsko vedro): Namen: Kot že samo ime pove, se trapezno vedro uporablja predvsem za izkop jarkov. Ti jarki so pogosto potrebni za polaganje komunalnih vodov, kot so vodovod, plinovod ali električni kabli. Nodpfx Ajn Dxf Djgxocr Oblika: Trapezno vedro je običajno ožje od standardnih izkopnih veder in ima lahko trapezasto obliko, ki omogoča izkop jarkov določene širine in globine. Prednosti: - Natančnost: Zasnovano za precizno in čisto izvedbo izkopa jarkov, kar zmanjšuje potrebo po ročnem dokončnem urejanju jarka. - Učinkovitost: Omogoča hitrejši izkop, zlasti pri ravnih in dolgotrajnih jarkih. - Vsestranost: Nekatera vedra imajo snemljive zobe ali robove, zaradi česar so primerna za različne tipe tal. 2. Čistilno (planirno) vedro za jarke: Namen: To vedro se uporablja za niveliranje, planiranje, čiščenje jarkov, odstranjevanje odpadkov in zasipavanje izkopov. Oblika: Običajno je širše in bolj plosko kot standardno izkopno vedro, pogosto ima tudi raven rob za profesionalno končno obdelavo. Prednosti: - Širok zajem: Zaradi širše zasnove lahko pokrije večjo površino v enem zamahu, kar poenostavi in pospeši planiranje ter niveliranje. - Gladek zaključek: Raven spodnji del zagotavlja gladko površino, kar je posebej pomembno pri pripravi terena za temelje ali asfaltiranje. - Vsestranost: Odlično za urejanje okolice, izvedbo odtočnih nagibov ali enakomerno razporeditev materiala po površini. Zaključek: Prava izbira vedra je ključnega pomena za učinkovitost in kakovost dela z mini bagrom. Z poznavanjem specifičnih funkcij in prednosti trapeznega ter čistilnega vedra lahko upravljavec zagotovi, da uporablja optimalno orodje za delo, kar pomeni večjo produktivnost in boljše rezultate.

Leto izdelave: 2023, stanje: novo, Namen uporabe: Gradbeništvo Ncedpfon Tm Ngjx Agxsr

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Tunelna pralna naprava s transportnim trakom – Deli, ki jih je treba očistiti, se prenašajo po neprekinjeno premikajočem se transportnem traku iz nerjavečega jekla ali po paletnem transporterju s premiki po principu »stop and go«. Čas/pretok prenosa in dimenzije tunela se projektirajo v skladu s potrebnim ciklom in proizvodnimi zahtevami stranke. Sinergija med kemičnim, toplotnim in mehanskim delovanjem omogoča natančno in visoko učinkovito pranje, ki odstrani vse kontaminante s komponent ter zagotavlja odlične rezultate čiščenja. Tunel je enostavno pregledovati zahvaljujoč vratom, nameščenim vzdolž tunela pri vsakem aktivnem postajališču. Sistem črpanja in filtracije z razpršilnimi razdelilniki iz nerjavečega jekla dosega največjo natančnost in učinkovitost obdelave z brizgalnimi šobami iz nerjavečega jekla ustrezne zmogljivosti. Tlak razprševanja se spremlja z manometri in regulira z krogelnimi ventili. Ncjdpfowdfnzjx Agxjr

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine height at 1.6 m: n/a Vibrations: none Nodpfx Aswf U Ruegxjcr Maximum payload: 200 kg Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l

Stanje: rabljeno, Leto izdelave: 2019, številka stroja/vozila: LC591, Technical Specifications & Performance Data This complete used bottling line is designed for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utility and process equipment. The line integrates components from renowned manufacturers to ensure consistent quality and availability in industrial packaging environments. Production speed: up to 8,000 bottles per hour Compatible bottle formats: 0.33 L, 0.5 L, 0.75 L, 1.0 L, 1.5 L, 2.0 L Containers: PET and glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Stretch blow molder: Easy Blow 4L (4,200 bph nominal) Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Packaging & handle application: SMI LSK 30 T Ergon shrink wrapper; SMI Pack HA-25 SX handle applicator Pallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; additional manual wrapper Process & utility units: GEA pasteurization unit HTF 3000PIN/19; GEA CIP unit; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G booster) Inspection & coding: FT System for fill level/closure/label inspection; Hitachi UX printer Advanced Automation & Control Systems The line features state-of-the-art automation and quality control for stable operation and reproducible product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure regulatory compliance and traceability. PLC/HMI: PLC installed for central control and recipe management Inspection: FT System for fill volume, closure presence/position, and label inspection Electrical: 400 V, 50 Hz, 16 A reference (component level) Coding: Hitachi UX inkjet printer for date/batch marking Format changeover: Designed for multiple PET and glass bottle formats Safety: Standard safety guards and emergency stop switches at all stations Production Line Integration Capability Ncjdpfx Ageyhbiboxjr Designed for flexible beverage production, the line integrates upstream preform handling and stretch blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors ensure gentle bottle handling and buffering. Upstream: Preform conveyor and hopper, Easy Blow 4L stretch blow molder Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33 L to 2.0 L for PET and glass End-of-line: shrink packing, handle application, palletizing...

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L90 Fully automatic hot water parts washer with basket drive via gear motor, stainless steel washing pump (manufacturer: Lowara), three-sided circulating spray system with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Maximum load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electronically adjustable (RT - 90°C) - System dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm - Empty weight: approx. 220 kg Washing timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and exterior casing) made from stainless steel 1.4301 Ncedjd Ryxcspfx Agxjr Water circulation system and loading basket made from stainless steel 1.4301 Complete system (tank and cabin) insulated with stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2,000 micron) Intake filter for pump protection Operating hours counter Steam extraction system with condensate return The parts washer is as-new (test facility/laboratory setup) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Stanje: Okvarjen nosilec rezervnih delov (rabljen), obratovalne ure: 2.744 h, številka stroja/vozila: 184482, tip motorja: Električni, proizvajalec: Hako Ncjdpfoyyk Tnjx Agxjr

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Ncjdsif Sg Sspfx Agxer Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: rabljeno, številka stroja/vozila: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimised for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletising. The configuration is non-combi and features a separate blow moulder upstream of the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottles Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow moulding and filling systems) Main components and years of manufacture: - Sidel Universal SBO 14 blow moulder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeller (2011) - Zambelli shrink wrapper (2004) - Handle applicator (2004) - ACMI double-head palletiser (1992) Advanced Automation and Control Systems The line benefits from a modernised conveyor and control system, with conveyor management and electrical control cabinets upgraded in 2010–2011. This update improves module synchronisation, enhances safety interlocks, and ensures stable high-speed performance across blowing, filling monoblock, labelling, and packaging stages. - Upgraded conveyor control and electrical panels in 2010–2011 - Integrated safety interlocks for secure, high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Line Integration Capabilities Designed as a complete production solution for water bottling, this used line offers seamless integration from blow moulding to end-of-line palletising. The non-combi layout allows independent operation and optimisation of the blow moulder and filling monoblock, making format changes and maintenance manageable without stopping the entire line. Inline flow: Blow moulder → Filling monoblock → Labelling → Shrink wrapping → Handle application → Palletising Conveyor system upgraded for reliable accumulation and product transfer Suitable for carbonated and still water in PET Machine Condition and Maintenance History This used bottling line has benefited from targeted upgrades of the conveyor management and electrical control cabinets, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally built in 1988 but fully overhauled in 2025 to ensure maximum operational reliability. The line is sold in operational condition as a ready-to-use industrial packaging solution. - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 - Conveyor and electrical control cabinets upgraded: 2010–2011 Ncodpfoyk E Srjx Agxsr - Well-known OEM components throughout the line - Operational with existing 0.5L PET format

Leto izdelave: 2025, obratovalne ure: 50 h, stanje: kot nova (razstavni stroj), Spray-Flood Cleaning System – Parts Cleaning System for Highest Demands and Precision/Ultrafine Cleaning Basket usable dimensions: LxWxH 600x400x300 mm Max. loading weight: 150 kg; loading cart for use in front of the system included 3-Tank Configuration: - Cleaning (600 liters) Njdpfx Aeg Itg Ejgxocr - Rinse 1 (600 liters) - Rinse 2 (600 liters) System electrically heated - Cleaning methods: spraying, injection flooding, ultrasonic cleaning - Ultrasonic (rod transducer): 3,000 watts effective / 6,000 watts peak – 30 kHz - During cleaning, rinsing and drying, the basket can be stationary, oscillating or rotating (freely selectable in the program) - Hot air and vacuum drying (vacuum pump by Leybold, 300 m3/h) - Full-filtration of all tanks (3), each with Topline bag filter (by Eaton), filter rating freely selectable - Automatic water refill for each tank - Prepared for coalescence oil separator - Prepared for installation of a demineralized water (DI/VE) recirculation system for rinse water treatment Control: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Sistem tehtanja in pakiranja Leto: 2023 Sestavljen iz: 1 x poševni transportni trak, višina približno 5 m Portal Ncsdpfxjy Exfvj Agxor 1 x večglava tehtnica s 14 glavami, dimple posoda 1 x vertikalni stroj za oblikovanje, polnjenje in zapiranje vreč, model: X500 (pakiral je 180 g vrečke stročjega graha) 1 x kontrolna tehtnica *Na voljo veliko videoposnetkov*

Leto izdelave: 2026, stanje: novo, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer via the DIN 25 fitting. The electrical control unit is mounted on the side to provide easier operation. The bottle filler and the bag-in-box filler are interconnected via two separate valves and can be used either together or independently. Bag-in-Box Filler: Semi-automatic model IBB 200, equipped with an induction flow meter made of stainless steel. Filling system operates without gravity. Volumetric pump with 1.1 kW power and flexible EPDM impeller. Touch screen interface for cycle selection, parameter settings, and cleaning. Vacuum and nitrogen injection cycles are freely adjustable. The built-in air compressor ensures continuous operation. Technical specifications: Bag-in-Box Power requirement: 1.1 kW 220V 50-60 Hz Suitable for: Ø 20–25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Storage tank capacity: 1500–1800 kg/h Dimensions: 600x820x1600 mm Weight: 120 kg Gravity-free filling system Storage tank capacity: 45 L Output: 670 L/h Dimensions: Ncjdpjtpxuvjfx Agxor 580x1800x1500 mm Weight: 45 kg Please feel free to visit our website!

Leto izdelave: 2022, obratovalne ure: 321 h, stanje: skoraj kot novo (rabljeno), KÄRCHER B300 Ri Diesel Ride-On Combination Scrubber Dryer and Sweeper This B300RiD was built in 2022, has only 321 operating hours, and is in an as-new overall condition. - THE PRICE IS PLUS 19% VAT! - Inspection / test drive available upon request - Nationwide shipping can be arranged; costs depend on the distance! Ncodpfx Agelgv Nvjxsr - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Stanje: rabljeno, Leto izdelave: 1991, Film wrapping machine for pharma-grade single and multipacks - Pester PEWO-fold, year of manufacture 1991 - Serial No. N-261 Machine dimensions: 2950 x 1450 x 2100 mm (L x W x H) Equipment: K-stacker Minimum format range: folding box 30 x 15 x 60 mm (a x b x h) Bundle 60 x 30 x 60 mm (L x W x H) Maximum format range: folding box 150 x 80 x 250 mm (a x b x h) Bundle 250 x 250 x 140 mm (L x W x H) Capacity: up to 60 bundles/min Control: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online video inspection via Skype video We would be pleased to welcome you for a visit – more machines in stock. Available immediately – can be inspected Ncodpfx Agsh Axgnexer In stock in Emskirchen / Nuremberg – can be tested

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, Štirikotna varilna in CNC čistilna linija za kote STURTZ SE - HSM 30/26 Compact. Celotna linija deluje pravilno in dobro. Oprema je delovala do zadnjega trenutka pred demontažo. Njdpsv Uzr Eefx Agxjcr

Stanje: zelo dobro (rabljeno), Kompletna linija neposredno od stečajnega podjetja, ki je polnila kapsule in tablete v manjše lončke. Stekleničke se nalagajo na linijo s pomočjo vrtljive mize (lazy susan), izdelek se prešteje in odmeri v lonček ali stekleničko, ki se nato zatesni z aluminijasto folijo, preden se privije navojni pokrov. Vsi stroji so bili kupljeni novi leta 2015 in so videti v odličnem stanju. Števec je Vitacount 12-1. Ncodpfxjw Hz T Es Agxor

Stanje: rabljeno, Uncoiler/Re-coiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of manufacture: 2023 (unused) Maximum coil weight: 1,500 kg Coil width with entry arms: 500 mm Coil width without entry arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with adaptor jaws: approx. 380 - 440 mm Uncoiler entry ring Ø: 2080 mm Maximum coil outer diameter without pressure arm: 2,350 mm Maximum coil outer diameter with pressure arm: 2,200 mm Distance from center of uncoiler hub to base: 1,200 mm Uncoiler shaft / support shaft Ø: 70 mm Rotational speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Stepless hub rotation speed via frequency inverter - Loop control / proximity switch for uncoiler STOP - Central expansion via hand crank Ncedpfxeua Nngs Agxer - Forward and reverse operation - Pneumatic pressure arm with running roller - 4 entry arms, 870 mm - 4 adaptor jaws made of plastic for adjusting the uncoiler hub Space requirements (L x W x H): Weight: 970 kg Very good condition

Stanje: rabljeno, Glass bottle filling line, consisting of the following components: 1. Bottle cleaning machine (standalone, Silmo, 1982) with a nominal capacity of 2,880 bottles per hour 2. Rinsing, filling, capping, and labeling line (IC Filling Systems, 2020) with: - Bottle infeed table - Rinser - Counterpressure filler - Capper - Bottle exterior washer - Cold glue labeller - Bottle outfeed table - Free bottle conveyor Nsdpew Ta Ndsfx Agxocr Machine (additional): Rinsing, filling, capping, and labeling line with separate bottle cleaning Output approx.: 1,100 bottles/hour (based on 0.33 l bottles) Length: approx. 7 m Width: approx. 4 m Formats: Euro 0.5 l and 0.33 l; crown corks; wrap-around and Bauche labels Direction of operation: Clockwise Basic design: Rinser, filler and capper in monoblock Equipment: Bottle cleaning machine, bottle infeed table, rinser, filler, capper, bottle exterior washer, labeller, bottle outfeed table, beer pump

Stanje: novo, with quick-lift system - NEW - Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor 1400/2800 rpm instead of 2.2 kW Motor speed: 2800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Actuator system: 1 eccentric Weight: 246 kg Article no. 300015 Including accessories: Nedpfxovwfr Io Agxscr 1 piece 2-speed motor 1400/2800 rpm instead of 2.2 kW No. A250070 1 piece 90° stop No. A350128 1 piece horizontal drilling indexing system with 4 hole patterns 16, 20, 22, 25 mm Bowden cable operation No. A300255 1 piece eccentric actuator with column and clamping cross No. A250055

Stanje: novo, with rapid stroke system - NEW - Nedpfsvwf H Eox Agxecr Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor, 1400/2800 rpm instead of 2.2 kW Motor speed: 2800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Plunger system: 1 eccentric Weight: 246 kg Item No. 300015 including accessories: 1 piece 2-speed motor, 1400/2800 rpm instead of 2.2 kW, Item No. A250070 1 piece 90° stop, Item No. A350128 1 piece horizontal drilling grid system with 4 rows of holes (16, 20, 22, 25 mm), Bowden cable operation, Item No. A300255 1 piece 4-wheel chassis with 2 swivel castors and 2 locking devices on own frame, Item No. A350415 1 piece eccentric plunger with column and clamping cross, Item No. A250055

Stanje: novo, with rapid traverse system, swiveling drilling head, user manual included. Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 140 mm Motor power: 2.2 kW Motor speed: 2,800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Press system: 1 eccentric Motor swivel angle: 65° right/left Weight: 268 kg Item no.: 320010 Ncodpfx Agovwfrzsxsr A 250070 2-speed motor, 1,400/2,800 rpm, instead of 2.2 kW (LLB/BS/BSK) A 250055 Eccentric press with column and clamping cross to suit LLB 200/300/320 A 350415 4-wheel chassis for LLB 300/320/400 with 2 swivel castors and 2 brakes, on a separate frame A 250128 90° plug-in stop for LLB 200 A 350255 Horizontal drilling raster system SH LLB 300 D/320 D with 4 hole rows: 16, 20, 22, 25 mm, cable control

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Popolni tehtalni in pakirni sistem Ilapak. Vključuje vibracijski podajalnik, poševni trakasti transporter s vedri. 10-glavna večglavna tehtnica z 2,5-litrskimi inox vedri. Vegatronic 500 s 300-mm čeljustmi s PLC za predtiskano folijo. Tiskalnik Markum in izhodni transporter. Ncjdpfx Ageywi Dasxsr

Leto izdelave: 2014, stanje: dober (rabljeno), Melag Melatherm 10 DT Washer Disinfector The Melag MelaTherm 10 DT is a washer-disinfector (WD) specifically designed for the automated reprocessing of instruments in medical and dental practices. It incorporates essential features such as active drying and integrated media dosing within the unit itself, helping to save space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D), fitting conveniently under a standard 60-cm worktop. Capacity: The optimized wash chamber accommodates instrument sets for up to 45 patients per cycle. Active drying: Provides reliable protection against corrosion and recontamination through integrated internal and external drying systems. Nedpfx Agoyk Eugsxocr Integrated process chemicals: Cleaner, neutralizer, and rinse aid are conveniently stored in a drawer inside the unit to save space. Manufacturer: Melag Model: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing is also available through our partner bank. komplett-konzept.leasingo.de Discover more new and used items in our shop! International shipping costs on request!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. Ncjdpfx Agewc Nrnsxsr The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film.

Stanje: zelo dobro (rabljeno), Bous Waschfix 70/T3 WSA naprava za čiščenje in razmaščevanje BOUS čistilna in razmaščevalna naprava Waschfix 70/T3 WSA Posebna oprema: Fine filter Nsdpfx Aspudubegxscr Črpalka za praznjenje Nadzor filtra Financiranje preko naše banke je mogoče. komplett-konzept.leasingo.de Druge izdelke - nove in rabljene - najdete v naši trgovini! Mednarodni stroški pošiljanja po dogovoru!