Rabljena kompletna polnilna linija za gazirane brezalkoholne pijače (CSD) v PET in steklo...

Atlanta

Stanje: pripravljen za uporabo (rabljen), Atlanta 58 43 905 right-angle gearbox 61511, serial number as per photo, center-to-center distance of the housing mounting holes: 80 x 80 mm, center-to-center distance of the drive-side mounting holes: 92 x 92 mm, bore diameter for the drive shaft: 24 mm, bore diameter for Nwjdpfoi D Ezlsx Aqqsh

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 34.590 h, številka stroja/vozila: R81, Used aseptic filling machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This used Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler designed for industrial packaging and beverage production. It is configured for Tetra Brik Aseptic 1000 ml (basic packs) and offers reliable, continuous operation for UHT milk, juices, and other long-life beverages. With a rated capacity of approx. 7,000 packs/hour, this pre-owned filling line component combines high throughput with aseptic integrity for contemporary carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (base) Nominal speed: ≈ 7,000 packs/hour Operating hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typically 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilizing agents) Dimensions and Weight Footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are reference points for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation and Control Systems The A3/Flex platform is equipped with an OEM PLC-based control system featuring a touchscreen HMI for recipe management, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and package quality at high speeds. Typical features include: • Recipe management for UHT milk, juices, and beverage varieties • Integrated process monitoring and event/alarm logs • I/O provisions for upstream and downstream equipment • Recommended pre-commissioning checks: PLC functions, valve actuation, pump performance, and seal integrity Integration Capabilities for Production Lines Nsdox H Thuopfx Aqqowh This aseptic carton filler can be efficiently integrated into a used filling line or a new layout for beverage production: Upstream: Packaging material feed and sterilization modules per OEM design Downstream: Conveyors for accumulation, straw/cap applicators, carton packers, palletizers Utilities/process: Interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Control: Standard digital/analog I/O and fieldbus-ready architecture, depending on configuration Ideal for industrial second-hand packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition and Maintenance History Condition: used, currently in storage Approximate operating hours: ≈ 30,000 Operational note: Continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves...

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm Nodjykucmjpfx Aqqewh · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter: Ø 1,700 mm Height: 2,200 mm Max. pallet dimension: 1,200 x 1,200 mm Rotation arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, independently adjustable for ascent/descent Acoustic signal at wrap start and at cycle end stop Emergency stop switch according to CE regulations Positioning aid for precise pallet placement included in delivery Safety bumper for collision protection Push buttons for machine power-on and Start & Stop functions per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All operating parameters adjustable via display F02 – Infinitely adjustable turntable speed 5–12 rpm Carriage ascent and descent speeds independently adjustable F03 – Carriage ascent speed from 1.3 up to 5.4 m/min F04 – Carriage descent speed from 1.3 up to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photocell activation delay for wrap height F62 – Ergonomic height for film changing ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 3 programmable wrap cycles storable F01–1: Cross wrapping (upwards/downwards) F01–2: Single wrapping (only upwards or downwards) F01–3: Push button for manual operation F12: Wrapping to a programmed height (photo sensor for height disabled) F22 / F23: Wrapping cycle for top sheet film F29: Soft start cycle for edge protection placement Soft start cycle to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Nedpfx Aoykudksqqowh Manually adjustable brake roller on film carriage Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE With electromagnetically braked roller Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A; 1.75 kW / 8.5A (with PRS / PS) Manual rope forming also available as an option. Further machines available ex stock Ludwigsburg for immediate delivery.

Stanje: dober (rabljeno), 849 RABLJENO Pralni stroj za košare, slaščičarski pralni stroj s stranskimi mizami Winterhalter. TEHNIČNI PODATKI: - teža: 118 kg - moč: 9,5 kW ZUNANJE MERE (v cm): Njdpfxet Ig Rve Aqqowh - širina: 63,5 - globina: 85 - višina: 146,9 (193,2 pri odprti komori) - mere košare: 50x50 - vhodna višina v komoro: 42 Naprava pripravljena za ogled se nahaja v našem skladišču (36-068 Bachórz, Poljska). Na voljo so plačljive možnosti: obnova / prevoz / montaža / zagon. Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO. V naših skladiščih imamo veliko pekovskih peči: etažne peči, rotacijske peči, plinske, oljne, električne, različnih proizvajalcev. Poleg tega ponujamo stroje, pekarsko opremo, linije za žemljice, linije za kruh. Če želite videti našo popolno in aktualno ponudbo, obiščite naš profil Bakeres.

Leto izdelave: 2026, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_03, Exhibition machine – like new. EVA Turntable / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Base frame raised by 150mm–200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up and down Nwedpfx Aqsykud Dsqoh Acoustic signal at cycle start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same start position Fall protection for the film carriage Push buttons for machine power-on and start & stop functions, compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Continuously adjustable turntable speed 5–12 rpm Carriage speed independently adjustable up and down F03 – Carriage speed up: 1.3–5.4 m/min F04 – Carriage speed down: 1.3–5.4 m/min F05 – Number of wraps at pallet base (1–10 revolutions) F06 – Number of wraps at pallet top (1–10 revolutions) F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Simple wrapping (either upwards or downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a stored height (photoelectric sensor deactivated) F29 – Soft-start cycle for application of edge protection Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Maximum outside diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power requirements: 230 V – 1N+PE – 50 HZ Total output: 1.2 kW / 6 A Other systems available immediately from stock.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MARATHON01, Semi-automatic manual film wrapper MARATHON TECHNICAL DETAILS The only "PATENTED" non-electrically powered mobile stretch wrapper worldwide capable of wrapping pallets with LLDPE stretch film. The machine wraps loads of any shape, weight, and size. It is recommended to use pre-stretched film with a roll diameter of max. Ø 230 mm. Minimum load dimensions: 650 x 400 mm. Minimum load weight: 50 kg. Wrapping height (including pallet): 2000 mm. Easy operation without reliance on a motor. Manual movement by the operator. The film carriage is moved up and down manually. The machine features simplified functions. Replaces manual hand wrapping. MANUAL WRAPPING OPTIONS The operator functions as the motor; number of wraps up and down is freely selectable. Nwjdpfxeykuf Is Aqqsh FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage. Film specification: Max. outer diameter Ø 230 mm - core Ø76 mm - height = 500 mm. Optional: Stretch film with core Ø50 mm or coreless. Additional machines available from stock in Ludwigsburg.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Nwsdpjt Eu Azefx Aqqsh

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at wrap start and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop functions, reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program change F02 - Stepless turntable speed adjustment 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 turns) F06 - Number of wraps at pallet top (1 - 10 turns) F09 - Photo eye delay for wrapping height F13 - F16 - Film tension for foot & head wrap / up & down wrap independently adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 savable wrapping programs F01-1 - Cross wrapping (upward/downward) F01-2 - Simple wrapping (up or down only) F01-3 - Push button for manual functions F10-F11 - Wrapping cycle with preset start and stop height F12 - Wrapping to a stored height (deactivates height photo sensor) F22 / F23 - Wrapping cycle for top sheet F29 - Soft start cycle for edge protection placement F30-F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on film carriage Film specification: max. outside diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total output: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Nsdpfoykuddsx Aqqswh Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Built-in frame Photo sensor for black products Cutting device etc. Other units available from stock in Ludwigsburg. Images may show options subject to additional charge.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S Nwodpeykuh Njfx Aqqsh with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, For sale: (For further extensive technical data, see PDF) Technical Details of the Machine: - Long-tube filling system with 40 filling valves and 8 counterpressure pistons - Pre-evacuation system to reduce oxygen intake - Hygienic bottle table and stainless steel components for durability - Mechanical adjustment range: 3,000 to 15,000 bottles/hour - Capacity range: 0.33l LN 3,000–13,500 bottles/hr, 0.5l NRW 3,000–12,000 bottles/hr - Low oxygen pickup: max. 0.02 mg O2/l - Conversion parts included for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the Machine: This machine offers numerous benefits that enhance the quality of the filling process. - Smooth, product-friendly filling under CO2 atmosphere - 50–60% lower CO2 consumption compared to short-tube fillers - High durability due to reinforced drive elements - Hygienic design makes cleaning easier - Short changeover times Njdpfxswqz Nno Aqqswh - Convertible to cans according to the manufacturer (conversion kit not included) Low operating hours: 3 days/week at 7 hours each; rarely used for 4 days/week Annual maintenance by the manufacturer The machine is immediately available and was only decommissioned about 5 months ago. Original purchase price was approx. €330,000

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25EVA01, Stretch Wrapper EVA *Leasing – Term 48 months with no down payment TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimension: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop switch according to CE regulations Turntable always stops at the same home position Fall protection for film carriage Push buttons for machine power, start & stop functions to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All operational parameters adjustable via display F02 – Continuously adjustable turntable speed: 5–12 rpm Carriage speed up and down adjustable independently F03 – Carriage upward speed: 1.3 to 5.4 m/min F04 – Carriage downward speed: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) Nwodpoykucyofx Aqqoh F06 – Number of wraps at pallet top (1–10 wraps) F09 – Set pallet wrap height F62 – Ergonomic height for film replacement ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Single wrapping (only upwards or downwards) F01-3 – Manual wrapping F12 – Wrapping to a preset height (with deactivation of photoelectric sensor) F29 – Soft start cycle for application of edge protection Soft start to minimize film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options: Turntable 1650 mm Ramp Mounting frame Photoelectric sensor for black products Further units available ex-stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min Nwodpfjyktv Sjx Aqqjh - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Stanje: pripravljen za uporabo (rabljen), Diameterrange: 50 mm – 108 mm Hoogterange: 38 mm – 197 mm Productiecapaciteit: tot 500 stuks per minuut Nwjdpfjtqmryjx Aqqeh Aantal koppen: 6

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25SFERA06, Mobile Stretch Wrapper ATLANTA SFERA Easy *Leasing available // from €180.51/month with 48-month term and €0 down payment TECHNICAL DETAILS: - Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series - 160 pallets per charge – Charging time: 8-10 hours - High-frequency battery charger with LED display - Wrapping height (machine with mast, pallet included): 2,000 mm (optionally up to 2,400 mm) - Height detection via photoelectric sensor or manual input on the display - Safety bar for emergency stop of drive unit - Emergency stop button according to CE regulations - Audible warning signal and warning light when machine starts - Fall protection for film carriage - Pushbuttons for Start & Stop - Machine function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: - All functional parameters adjustable via display - F00 - Display lock for program changes - F02 - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed adjustable independently upwards and downwards - F03 - Carriage speed upwards: 1.3 to 5.4 m/min - F04 - Carriage speed downwards: 1.3 to 5.4 m/min - F05 - Number of wraps at pallet foot (1 - 10 wraps) - F06 - Number of wraps at pallet top (1 - 10 wraps) - F09 - Adjustment of pallet wrapping height - F13 - F16 - Film tension for bottom & top wraps / ascent & descent adjustable separately - F17 - F20 - Pre-stretch for bottom & top wraps / ascent & descent adjustable separately - F62 - Ergonomic height for film change - Film consumption display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY Nwjdpfx Aqjykua Soqjh - F01-1 - Cross wrapping (upwards/downwards) - F01-2 - Simple wrapping (only upwards or only downwards) - F10 - F11 - Wrapping cycle with predefined start and stop heights - F12 - Wrapping to a preset height (disabling photoelectric height sensor) - F21 - Wrapping cycle for pallets with large dimensions - F22 / F23 - Wrapping cycle for top sheet film - F29 - Soft-start cycle for applying edge protection - F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps - Soft-start to reduce film tearing on sharp pallet edges - Wrapping cycle with manual or motorized rope-forming (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Tension adjustable manually from the carriage via tension roller - Film specification: Max. outer diameter Ø 250 mm, core Ø 76 mm, height = 500 mm - Optional: Stretch film with core Ø 50 mm or coreless stretch film - Standard connection values: 230 V - 1L+N+PE - 50 Hz Options available: - Wrapping height up to 2,400 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120-400% - Automatic rope forming for wrap reinforcement - Automatic system for cutting film into 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C - LITHIUM RELION BATTERIES 2 x 12V - Automatic cutting unit (FE, PRS & PS) Other units available ex stock Ludwigsburg. Image similar.