Pressta Eisele Pv10 P nakup rabljenega (41.143)

Stanje: zelo dobro (rabljeno), Kotni spajalni stroj Pressta Esiele PV10 P Dostava po EU ~350 evrov Podpol Skl Isfx Agxegk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 380 kg, Dimenzije (ŠxVxG): 950 x 800 x 1150 mm Teža: 350 kg Psdpfx Ageyl R T Dexegk Način delovanja: hidropnevmatski Obratovalni tlak (pnevmatski): 6 do 8 bar Poraba zraka: 10 litrov na hod Pritisk sile: 35 kN pri 7 bar Priključek za zrak: R 1/4" Hod izseka: 20 mm Povratni hod: 100 mm Maks. višina izseka: 120 mm Maks. višina profila: 120 mm

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), Installation height: Standard 140 mm Maximum installation height: 280 mm Pgjdpjfitbwofx Agxjk Table size: 450 x 300 mm Dimensions (W x D x H): 60 x 850 x 1500 mm Weight: 300 kg

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Strojna žaga za izreza in poševne izreza. Pjdpeyzcpdjfx Agxsgk Stroj ima dve žagini listi s premerom 500 mm. Opremljena je s pnevmatsko vpenjalno napravo. Podajanje je hidropnevmatsko in se sproži z dvoročnim upravljanjem. Omejevalnik materiala je vrtljiv z zaskočnimi točkami ter digitalnim prikazom. Višina izreza ter kot sta motorizirano nastavljiva in imata digitalni prikaz. Maks. višina profila: 280 mm Maks. širina izreza: 300 mm Maks. višina izreza: 185 mm Maks. globina izreza: 185 mm

Leto izdelave: 2006, stanje: dober (rabljeno), za obdelavo aluminijastih in PVC profilov v fasadni in konstrukcijski gradnji Rezanje na poševno v 3 ravninah, prav tako uporabna kot rezalna žaga za poševne reze Obdelava profilov do 300 mm širine pri 90°, ostri poševni rezi do 30° Globina izreza vodoravno do 185 mm in navpično do 230 mm pri 90° Širina izreza pri 90° je 300 mm, višina profila do 280 mm Psdpfxoyz T A Us Agxjgk Nastavitev višine izreza motorizirano, pozicioniranje z elektronskim digitalnim prikazom Območje vrtenja žaginega lista vertikalno 60° - 90° - 25° (spredaj/sredina/zadaj) motorizirano, pozicioniranje z elektronskim digitalnim prikazom Območje vrtenja žaginega lista horizontalno z navpičnim listom 45° - 90° - 45° motorizirano, pozicioniranje z elektronskim digitalnim prikazom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Metal circular saw from 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feed and a pneumatic clamping system to ensure efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for more details about this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: Adjustable, approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed, top-down • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before retracting saw blade (no re-cutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force adjustable separately; exchangeable plastic/PVC pads • Control: PLC-based; operated via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubricant control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction (for connection to Ø100/Ø160 mm ports) Psdpfx Aeyyxxfsgxegk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1587 / 1588, premer žaginega lista: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control. Punching unit: Features a hydraulic punching unit on the discharge side with a punching force of 250 kN. The punching direction is vertical from above, and up to 8 profile punching tool cassettes can be used simultaneously. Material feed: The feed is managed via a ball screw and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control: Modern variants often utilize a Siemens S7 control system with a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Pedpjyyz Txjfx Agxegk Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. On request, we also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about. 📞 Please feel free to contact us for further information or a non-binding quotation. We provide you with personal and expert advice. Interim sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials. Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing Range & Feed: 500–550 mm saw blades Psdpfx Asyyz Ebjgxsgk Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Infinitely variable speed regulation Saw cut from below, motorized feed Material feed: 3–800 mm, reversible up to 4,000 mm Ballscrew with servo drive and round-shaft guide Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: Vertical hydraulic punching unit (outfeed side) with automatic oil cooling Punching force: 300 kN Stroke: 20 mm Double-stroke cycle time: 2–3 seconds Punch scrap ejection into frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, reduced pressure) 3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control Minimum quantity lubrication system with 2x 3-liter tank and fill level display Noise reduction package: hood and internal saw blade guard insulated Roller conveyor (740 mm) with operator protection on infeed side Sturdy stationary machine frame, working height: 960 mm Manually operated safety hood Saw blade housing located below table surface Max. Cutting Range: Profile height: up to 65 mm Profile width: up to 170 mm Technical Data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm 2 machines available ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution. On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed. Sawing range & feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Continuously variable speed control Up-cut sawing, motorized feed Material feed: 3–800 mm, reversing up to 4,000 mm Ball screw spindle with servo drive and round shaft guide Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching unit: Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler Punching force: 2 × 150 kN Stroke: ≤ 20 mm Vertical stroke infinitely adjustable (also suitable for embossing) Horizontal punching cylinder can be switched off separately Double-stroke cycle time: 2x 2–3 seconds Punch waste is discharged laterally from the machine frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure-reduced) 3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control Minimum quantity spray unit with 2x 3-litre tanks and level indicators Pgjdpfx Agoyyzxhoxsk Noise protection package: hood and saw blade guard with internal insulation Roller conveyor (740 mm) with reach-in protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening safety hood Saw blade housing below the tabletop Max. cutting range: Profile height: up to 65 mm Profile width: up to 135 mm Technical data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm A total of 2 units available. ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and competent advice. Subject to prior sale, changes and errors excepted!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.809 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1559, premer žaginega lista: 550 mm, dolžina podajanja os X: 800 mm, skupna dolžina: 2.400 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, Obseg rezanja okroglega jekla pri 90°: 190 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.850 obr/min, največja višina reza: 150 mm, skupna masa: 1.650 kg, dolžina odseka (min.): 3 mm, dolžina odseka (maks.): 4.000 mm, hitrost žaginega lista: 2.850 obr/min, vhodna napetost: 400 V, pogonska enota žage: 7.500 W, premer rezanja: 270 mm, izvrtina žagine plošče: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 €69,430.00 €69,430.00 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter Includes CPU 315 and a Flexisoft, piece count multiplier for bundle processing Cycle time specification in seconds, chain dimensions, includes reversing device for section length up to max. 4 m automatic shutdown via limit switch at the end of the saw material, error diagnostics, includes IXON router for VPN connection, see data sheet motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping from bottom to top, infeed and outfeed side from the saw head, saw kerf extension on both sides of the saw blade, electronic material feed unit 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping, The profile support area in the feed zone is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile, clamping pressure reduction horizontal and vertical with 6 pressure regulators, cycle spraying device with fill level monitoring and automatic shutdown, lubricant container 1 liter, noise protection package, frame interior lined with insulation mats 2 extraction ports Ø 100 mm, safety cover over the saw head and feed unit, 740 mm roller conveyor with access protection on the infeed side, 450 mm Pertinax tabletop with access protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be easily removed for emptying 2 outlets with hose adapter 100 mm, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow rate 2,600 m³/h, negative pressure 30 mBar, with fan snail casing above the extractor large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 dB (A) Selector switch for continuous operation or operation triggered by the saw, supplied without power cable, paint finish: RAL 7035 / 9016 Pedpey Dtpmefx Agxsgk

Leto izdelave: 2009, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Pgsdpfx Agsywtqdoxek Premer žaginega lista vodoravno: 500 mm Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Omejilnik materiala: vrtljiv 30° - 90° - 45° Vrtljiv omejilnik materiala z zaskoki in prikazom na zaslonu Programska krmiljenja za samodejno nastavitev višine reza, kotov in višine izreza Shranjevanje do 6 programov Hidropnevmatsko podajanje materiala preko dvoročnega upravljanja Pnevmatske vpenjalke za material Mazanje s hladilno tekočino

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, commande entièrement automatique entraînement 7,5 kW, S6, 400 V, 50 Hz, 2850 tr/min pour l’utilisation de lames de scie D 550 mm plage de coupe 270x140 mm (largeur x hauteur), D 185 mm largeur de profil max. 270 mm Pedpfx Aeyvtyvsgxjgk commande avec écran avec compteur de pièces avec dispositif de réversibilité pour une longueur de coupe max. 3000 mm arrêt automatique via interrupteur de fin de course en fin de matériau avancement de lame de scie hydropneumatique, réglable en continu, de bas en haut système de serrage vertical et horizontal, côté alimentation et évacuation de la tête de scie dispositif pneumatique de pulvérisation doseuse élargissement de l’écartement de coupe des deux côtés de la lame dispositif d’alimentation électronique 3–600 mm de longueur d’avance, avec vis à billes et servomoteur, avec dispositif de serrage pneumatique horizontal et vertical, longueur de chute à partir de 75 mm, selon le profil 2 embouts d’aspiration D 100 mm capot de sécurité sur la tête de scie et l’unité d’avance Une installation d’aspiration adaptée peut être proposée en option !

Stanje: rabljeno, Leto izdelave: 2001, Hidropnevmatski način delovanja Pjdeyu Rztepfx Agxsgk Višina profila: 210 mm pod vpenjalom Maks. višina izseka s 2-krat nastavljivimi izsekalnimi glavami: 145 mm Višina prislona: 150 mm Teža: ca. 400 kg

Stanje: rabljeno, Leto izdelave: 2009, Hidravlično delovanje Pgodpfeyu Rw Ijx Agxjk Višina profila do 210 mm pod pritiskalcem Največja višina izsekovanja z dvojnimi nastavljivimi izsekovalnimi glavami: 145 mm Višina prislona: 150 mm Teža: pribl. 450 kg

Stanje: rabljeno, Leto izdelave: 1998, Hidropnevmatski način delovanja Višina profila: 180 mm pod pritisnim držalom Največja višina izseka: 145 mm Psdpsyrrddsfx Agxsgk Višina prislona: 150 mm Teža: pribl. 400 kg

Stanje: rabljeno, Leto izdelave: 1995, Hidropnevmatski način delovanja Višina profila: 180 mm pod pritisnim držalom Največja višina izseka: 145 mm Višina prislona: 150 mm Pjdpfx Agoyrrbvsxjgk Teža: pribl. 400 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, univerzálně použitelný díky dvakrát nastavitelnému děrovacímu tělesu pro rohové úhelníky s drážkou o rozměru 25–60 mm a s posunem komory profilu 0–40 mm plynule výškově nastavitelné snímače, děrovací nůž a dorazová vložka snímače a děrovací tělesa jsou opatřeny měřítky zasouvatelný doraz pro snadné vkládání profilů, automaticky se nastavuje při najetí na profil hydraulická aretace dorazu pneumatický děrovací proces přes pákový systém zajišťuje synchronní děrování max. výška dorazu 120 mm výška profilu do 190 mm při stlačení výška děrování do 150 mm Pedpfxjyqxbge Agxegk šířka profilu do 75 mm, navíc přesahy do 60 mm nejmenší vnitřní rozměr rámu 175 mm 2 pneumatické upínací válce pro upnutí profilů 2 excentrické kotouče pro polohování rámů 2 výkyvná ramena pro odkládání profilů ovládání pomocí 2 nožních ventilů

Stanje: rabljeno, Leto izdelave: 2011, Hidropnevmatsko delovanje Višina profila: 200 mm pod pritisnim elementom Pgedsynalujpfx Agxok Maks. višina izseka: 150 mm Višina naslona: 150 mm Teža: pribl. 400 kg

Stanje: rabljeno, Hydropneumatic operating principle Max. punching height: 90 mm Back gauge stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Podpfx Aow Inudjgxjgk Max. profile height: 100 mm Weight: approx. 280 kg

Leto izdelave: 2001, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Premer žaginega lista vodoravno: 500 mm Pgjdpfxjygkn De Agxok Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Naslon za material: vrtljiv 30° - 90° - 45° Naslon za material vrtljiv z zaskočnimi točkami in digitalnim prikazom Višina izreza motorizirano nastavljiva z digitalnim prikazom Motorizirano nastavljanje kotov z digitalnim prikazom Hidropnevmatski pomik materiala preko 2-ročnega upravljanja Pnevmatijske spone za material Mazanje s hladilnim sredstvom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Podpfx Agjxvbvvsxsgk Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Pneumatic cross pusher

Stanje: novo, Za obdelavo vseh standardnih aluminijastih okenskih profilnih sistemov kot so Schüco, Hueck, Heroal, Reynolds itd. Univerzalna uporaba zaradi dvakrat nastavljivih prebijalnih teles Za vogalne spojke z dimenzijo utora od 25–60 mm in premikom profilne komore 0–40 mm Neomejeno po višini nastavljivi tipala, prebijalna rezila in vstavki prislonov Tipala in prebijalna telesa so opremljena z lestvicami Vgradni prislon za enostavno vstavljanje profilov, samodejno nastavljiv ob pomiku proti profilu Pgsdpjhmfyhofx Agxok Hidravlična blokada prislona Pnevmatski stiskalni postopek prek vzvodnega sistema zagotavlja sinhron prebijalni postopek 2 pnevmatska vpenjalna cilindra za pritrditev profilov 2 ekscentrična diska za pozicioniranje okvirjev 2 zložljivi podporni roki za profile Upravljanje preko 2 nožnih ventilov Vključno s standardnimi orodji

Leto izdelave: 1999, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Pedevmz R Sspfx Agxsgk Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance sawing machine with fully automatic operation * Very high cutting precision * Short cycle times * Low-burr sawing * High reliability * Low maintenance requirements Suitable for aluminum and plastic; ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Cutting of corner connectors. Very well-maintained, ready-to-operate used condition. Technical data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversal possible - Cut length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on cut length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feeder - Roller conveyors - Extraction unit Pgjdpfxjw D T Uie Agxsk - Chip bunker - Various accessories - CE marking No guarantee as to the completeness or correctness of the technical data and equipment. Subject to prior sale.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, premer žaginega lista: 550.500 mm, Machine in perfect technical condition. Very little used. Designed for processing aluminium and PVC profiles. Pedpfsvtarnsx Agxjgk Mitre cuts possible at 3 levels and can be used as a splitting saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre. Profile machining up to 300 mm, width up to 90°, mitre angles up to 30°. Notch depth horizontally up to 185 mm, vertically up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/center/rear), manual, positioning with digital display. Material stop (tabletop) can be manually rotated left and right within 30° - 90° - 30°, positioning via measurement scale. Material depth stop adjustable manually using a sliding carriage and manual clamp, positioned with a digital display.