Optimum Optiturn Tu 2004V nakup rabljenega (3.801)

Stanje: novo, Leto izdelave: 2026, OPTIturn TU 2004V – Lathe with Stepless Speed Control and Digital Speed Display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed readout Precision Engineering Sturdily ribbed prism bed made of cast steel, induction hardened and precision ground Hardened and ground bed guides Hardened spindle nose (DIN 6350) Guaranteed spindle nose run-out accuracy better than 0.009 mm Automatic longitudinal/lead screw drive Tsdpfecnxrcex Aqteb Equipped with longitudinal, cross, and compound slides Selectable forward/reverse rotation on control panel Emergency stop button Chuck guard Thrust bearing Leadscrew mounted in two sintered bearings Wide threading range via change gear set Simple and quick speed changes via V-belt Change gear transmission EMC filter class B (approved for domestic use) Equipment details: - Digital speed indicator - Easy-to-read digital speed display - Chip guard on compound slide - Four-way tool post, rotatable - Roll-threaded trapezoidal spindle (leadscrew) - Tailstock adjustable for taper turning - Tailstock quill and handwheel with fine adjustable scaling 0.02 mm - Main spindle hardened and mounted in adjustable precision taper roller bearings - Taper roller bearings in P5 quality - Cylindrical centering receiver - Hardened spindle nose with 21 mm spindle bore - Chuck with run-out accuracy better than 0.04 mm Scope of delivery: - 3-jaw chuck Ø 100 mm, self-centering - Fixed centre MK 2 - Fixed centre MK 3 - Splash guard - Chip tray - 4-way tool holder - Change gear set - Operating tools Model: OPTIturn TU 2004V Item No.: 3420310 Technical Data Power supply: 230 V / 1 Ph ~50 Hz Spindle motor power: 600 W Spindle taper: MK 3 Spindle bore: 21 mm Passage of 3-jaw chuck: 20 mm Tool post mounting height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Number of steps: 2, speed electrically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Metric thread pitch: 0.25 – 3 mm/rev (14) Imperial thread pitch: 44 – 8 TPI (12) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 30 mm, hitrost vretena (min.): 40 obr/min, potovalna razdalja osi X: 145 mm, pomik po osi Z: 465 mm, največja hitrost vrtenja: 4.000 obr/min, širina na sredini: 650 mm, višina središča: 150 mm, nosilnost: 1.200 kg, globina grla: 4.000 mm, For sale is an as-new CNC lathe from the brand OPTIMUM, model OPTIturn L28HS. The machine is in like-new condition, originating from a vocational training institute (BFI), and was used exclusively for training purposes (setup and program transfer). Technical data: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Center height: 150 mm Distance between centers: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mount: Iso 702-1 No.3 – Type A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool turret: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Required installation space: 1,655 x 1,485 x 1,955 mm Tsdpfsy D Hkqox Aqtjb Note: The machine hours can be read out on site if you have the necessary knowledge. Since the machine was only used for training purposes, very low operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized Europe-wide upon request, subject to additional costs. Prices are plus VAT. Inspection available by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell one? For further information or to get in touch, visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 240 mm, pomik po osi Z: 550 mm, skupna višina: 2.000 mm, skupna širina: 1.870 mm, skupna masa: 3.200 kg, proizvajalec krmilnikov: SIEMENS, največja dolžina izdelka: 4.050 mm, število mest v zalogovniku orodij: 12, število osi: 2, Vodoravni stružni stroj, letnik 2015. Ta Optimum OPTIturn S 600 ima premer struženja 320 mm in dolžino struženja 550 mm. Opremljena je s hidravličnim revolverjem z 12 orodnimi mesti in območjem vrtljajev vretena od 30 do 4000 min⁻¹. Če iščete visokokakovostne zmogljivosti struženja, morate razmisliti o nakupu pri nas ponujene Optimum OPTIturn S 600. Za več informacij nas kontaktirajte. • Premer struženja: 320 mm • Dolžina struženja: 550 mm • Premer nad posteljo stroja: 550 mm • Premer nad prečnim suportom: 370 mm • Glavna izvrtina vretena: 76 mm • Izvrtina vretena s hidravlično vpenjalno glavo: 200 mm • Konus vretena: A2-6 • Moč pogonskega motorja: S1 (trajno delovanje) 11 kW; S6-30 % 14,3 kW Tedpfx Aezg Eamsqtsb • Tip revolverja: hidravlični VDI 30 • Število orodnih mest: 12 • Hitri pomik X/Y-os: 30/36 m/min • Konica lunete: MT4 • Hod tulec: 80 mm • Premer tulec: 75 mm • Skupna nazivna moč: 30 kVA Tehnične specifikacije Proti-vreteno: Ne Pogonska orodja: Ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 1.600 obr/min, potovalna razdalja osi X: 368 mm, pomik po osi Z: 2.900 mm, skupna višina: 1.925 mm, skupna širina: 1.525 mm, skupna masa: 3.820 kg, največja dolžina izdelka: 5.278 mm, število osi: 2, Horizontal lathe from 2022. This Optimum OptiTurn TH 8030D features a maximum turning diameter of 800 mm and a turning length of 250 mm. It is equipped with a robust spindle chuck and a rapid traverse speed of 3,800 mm/min. If you are looking for a high-quality lathe, you should consider the Optimum OptiTurn TH 8030D that we are offering for sale. Contact us for further details regarding this machine. • Type and Highlights • Lead and feed screw lathe, offering high flexibility, precision, and efficiency • Prepared for digital position indicator (see optional equipment) and quick-change tool post (see optional equipment) • Shipping Information • Packaging dimensions: Length 4,770 mm, Width 1,150 mm, Height 1,840 mm • Weights: Gross 4,480 kg, Net 3,870 kg • Technical Data • Load capacity: 1.4 t/m • Working areas: - Max. height: 400 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Bed width: 400 mm - Max. width: 3,050 mm - Swing in bed gap: 1,035 mm - Turning length in bed gap: 250 mm • Spindle speed range: - Number of speeds: 16 • Rapid traverse: - Rapid traverse speed: 3,800 mm/min - Max. duration of rapid traverse: 5 min (30 min. pause) • Electrical Data: - Drive motor rating: 11 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Electrical connections: Total rated value 12 kW • Coolant System: - Coolant pump capacity: 150 W • Spindle: - Spindle chuck: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 105 mm - Spindle taper Ø113 (taper 1:20) mm • Tool holder: max. clamping height 32 mm • Tailstock: - Tailstock taper: MK 5 - Tailstock quill stroke: 235 mm - Tailstock quill diameter: 90 mm • Thread cutting: - Metric thread pitch mm/rev (54 pitches) - Inch thread pitch 80 - 7/16 TPI (60 pitches) Tsdjyxncdspfx Aqtjb - Diametral pitch 7/8 - 160 (42 pitches) - Modular pitch 0.25 - 60 mm/rev (46 pitches) • Travel: - Top slide travel: 230 mm - Saddle travel: 2,900 mm - Cross slide travel: 368 mm • Feed: - Longitudinal feed range: 0.044 - 1.48 mm/rev (25 feeds) - Cross feed range: 0.022 - 0.74 mm/rev (25 feeds) • Build Features and Safety - Hardened and ground Z-axis guideways - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Precisely machined saddle; all guides adjustable via gib strips - Top slide swivel range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Shafts, gears, and main spindle run in oil bath - Gears smooth, hardened, and ground with 2 adjustable precision tapered roller bearings - User-friendly lever for feed rate adjustment - Enclosed rapid traverse gearbox - Gears and shafts hardened and ground, running in oil-bath in precision bearings - Handwheels decoupled and tested to EN 23125 - Dual-channel right-left switch, tested to EN 23125 - Switches with lifecycle calculation, tested to EN ISO 13849 - Right/left travel engaged via control shaft at the carriage - Central lubrication at the carriage - Coolant system with separate tank, level indicator, and oil separator; easy and complete drainage and cleaning per DIN - Lead screw drive - Emergency stop mushroom switch, motor protection switch, lockable main switch

Stanje: pripravljen za uporabo (rabljen), Ponujamo CNC stružnico Optimum. Premer obdelovanca nad strojno posteljo/podreznim sledilcem: 300 mm/200 mm, razdalja med centri: 430 mm, hod osi X/Z: 145 mm/465 mm, hitri hod osi X/Z: 10 m/min/12 m/min, premer obdelovanca za obdelavo palic: 30 mm, premer vretena: 30 mm, največja hitrost vretena: 4000 vrt/min, število orodnih mest: 6, krmilni sistem: Siemens SINUMERIK 808D ADVANCED. Dimenzije stroja X/Y/Z: približno 1655 mm/1590 mm/1955 mm, teža: približno 832 kg. Možnost ogleda na kraju samem. Todpfsztdtxsx Aqteb

Stanje: novo, Leto izdelave: 2025, For current prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in bed gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system pump output: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Maximum tool post height: 25 mm Spindle taper: MK 6 Tailstock: Tailstock taper: MK 4 Tedpfx Aqsq Ukbpstob Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Threads: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 41 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module thread pitches: 34 Travel: Cross slide travel: 125 mm Compound slide travel: 285 mm Carriage travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Stanje: novo, Precizni vodilni in vlečni vretenasti stružnica Proizvajalec: OPTIMUM Model: OPTiturn TZ 4V Art. št.: 3432245 Stanje: Nov stroj Višina konice: 200 mm Razdalja med konicama: 800 mm Obratov: 50 - 3.000 min⁻¹ brezstopenjsko nastavljivo prek 2 stopenj menjalnika s SIEMENS inverter variabilnim pogonom Standardna oprema: Tsdpfxog Hkmrj Aqtsb - 3-osni digitalni prikazovalnik DPA 32 - digitalni prikazovalnik vrtljajev na vretenu - fiksni centrirni konus MK 3 - hitromenjalni nosilec orodja velikost B - nosilec stružnega noža BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm - gibljiva luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za ostružke - LED strojna svetilka - servisno orodje

Stanje: novo, Leto izdelave: 2026, Precizni stružnica s vodilno in vlečno vreteno Znamka: OPTIMUM Model: OPTiturn TZ 4 Art. št.: 3432240 Stanje: novo Višina konice: 200 mm Razdalja med konicama: 800 mm Št. vrtljajev: 45 - 1.800 min⁻¹ (16 stopenj) Serijska oprema: - 3-osni digitalni prikaz DPA 32 - fiksna centrirna konica MK 3 - hitromenjalni držalo za rezilo, velikost B - držalo za stružno rezilo BD - redukcijski tulec MK 6 / MK 3 Todpfx Asgqw U Reqtsb - fiksna luneta ø 10 - 130 mm - premična luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za odrezke - LED strojna svetilka - orodje za upravljanje

Stanje: novo, Precizni stružnica z vodilno in vlečno vreteno Znamka: OPTiturn Model: TM 4010 D Art.-št.: 3403045 Stanje: Nov stroj Tedsilup Nspfx Aqtob Višina konice: 200 mm Razdalja med konicama: 1.000 mm Hitrost vretena: 70 - 2.000 min⁻¹ (8 stopenj) Standardna oprema: - 3-osni digitalni prikazovalnik DPA 31 PLUS - Podnožje stroja - Trivrateno vpenjalo 200 mm - LED strojna svetilka - Redukcijska puša MK 4/MK 6 - Fiksna centrirna konica MK 4 - Fiksna luneta - Gibljiva luneta - Nosilec za hitri menjavalec orodij, osnovni tip E - Nosilec za stružne nože ED - Pokrov vpenjala, električno zavarovan - Polnjenje z oljem - Orodje za upravljanje - Navodila za uporabo

Stanje: novo, Natančen vodilni in povlečni vretenast stružnica Znamka: OPTiturn Model: TH 4210 Art. št.: 3462050 Stanje: Nova naprava Višina konice: 210 mm Razdalja med konicami: 1.000 mm Standardna oprema: - Podstavek stroja - Štirikotni nosilec za orodje - LED strojna svetilka - Redukcijska puša MK 6/MK 4 - 2 fiksni centrirni konici MK 4 - Fiksna luneta, 15–105 mm Tjdpfedbgxcex Aqteb - Sledilna luneta, 10–65 mm - Zaščitni pokrov za vpenjalno glavo, električno zaščiten - Naprava za hlajenje - Komplet menjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: novo, Natančni vodilno-vlečni stružnica Proizvajalec: OPTiturn Tedpfxoh I N Sbo Aqtsb Model: TM 3310 D Kataloška št.: 3403025 Stanje: Novi stroj Višina konice: 165 mm Razmak med konicami: 1.000 mm Hitrost vretena: 65 - 2.000 min⁻¹ (9 stopenj) Serijska oprema: - 3-osni digitalni prikazovalnik DPA 31 PLUS - Trivraten 160 mm vpenjalni tulec - Električno zavorni glavni motor - Podstavek stroja z lovilcem ostružkov - Štirikratni nosilec orodja - LED strojna svetilka - Redukcijski tulec MK 5/MK 3 - Fiksna centrirna konica MK 3 - Električno varovana zaščita vpenjalnega tuleca - Set izmenjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: novo, Swing diameter: 360 mm Turning length: 1000 mm Swing diameter over bed slide: 360 mm Centre height: 180 mm Spindle speed: 70–2400 rpm Total power requirement: 2.2 kW Machine weight approx.: 680 kg Space requirement approx.: 2000 x 1500 x 900 mm Equipment: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mounting: Camlock DIN ISO 702-2 No. 5 - Motor protection switch - Main motor electrically braked - Switchable left/right rotation at the bed slide - Dual-channel safety electronics - Switch verified for lifecycle calculation according to EN ISO 13849 - Perfectly running main spindle guarantees high load capacity due to precision taper roller bearings Tsdpfx Asw U U Tmsqteb - Equipped with a safety device to prevent simultaneous operation of thread cutting and feed mechanism - Safety handwheels with disengagement function on X and Z axes - All feed gearbox gears made of steel, hardened and ground; all shafts run in needle bearings; all components lubricated in an oil bath - Simple feed operation - One change gear position - Control cabinet with extended Optimum control - Coolant pump with coolant tank and level indicator – tank is removable for easy cleaning - LED machine lamp integrated into machine housing - Machine base in robust steel construction - Emergency stop mushroom switches on both right and left sides - Lockable main switch Special accessories: Incl. three-jaw chuck Incl. quick-change toolholder

Stanje: novo, Swing diameter 560 mm Turning length 1910 mm Swing diameter over bed slide 355 mm Swing diameter in bed bridge 790 mm Centre height 280 mm Turning length in bed bridge 170 mm Spindle speeds 12 (25-1600) rpm Tailstock taper MK 5 Quill stroke 180 mm Quill diameter 75 mm Spindle mount DIN ISO 702-2 No. 8 Spindle bore 80 mm Spindle taper MK 7 Longitudinal feed 35 / 0.059 - 1.646 m/min Face feed 35 / 0.020 - 0.573 m/min Total power requirement 8.5 kW Machine weight approx. 2,560 kg Space requirement approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty machine featuring high flexibility, precision, and cost efficiency. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage Tsdpfxjucgr Ij Aqtob - All guides adjustable via gib strips - Forward/reverse operation on carriage, switchable via leadscrew - Dual-channel safety electronics - Central lubrication in the carriage - Cross slide adjustment range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable precision tapered roller bearings - Switches with life cycle calculation, tested according to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function per EN 23125 on X and Z axes - Gears and shafts hardened and ground, running in precision bearings in oil bath - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Emergency stop slam switch, motor protection switch, lockable main switch - Emergency stop device, foot-operated - Tailstock for taper turning, adjustable ±10 mm - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment using clamping lever - Cable carrier for gentle cable and hose guidance - Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Thread dial indicator scale adjustable Scope of delivery: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5 - TH 5620V: Reducing sleeve Ø113 mm / MK 5 - Fixed centre MK 5 - Fixed and revolving centre MK 5 - Quick-change tool post 7-C - Tool holder 32 x 150 type D for square tool bits - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Tsdpfok Egrpsx Aqtsb Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: zelo dobro (rabljeno), 3-axis digital readout Universal “HURON-type” milling machine with swiveling head, 360° orientation 3-axis digital readout Vertical spindle power: 2.2 kW X-axis travel: 600 mm manual / 480 mm automatic Y-axis travel: 270 mm manual Z-axis travel: 380 mm manual / 340 mm automatic Feed rate: 24 – 402 mm/min Number of spindle speeds: 11 Spindle speed range: 45 – 1600 rpm Dimensions: 1540 x 1355 x 1650 mm Todpfx Ajwlggusqteb Weight: 1,500 kg

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System Coolant pump power: 60 W Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Tedpfex Hdq Tex Aqtob Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: rabljeno, Leto izdelave: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, signs of use present - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guideways adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide adjustable range ±90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Gear wheels operate smoothly, are hardened and ground, mounted with 2 adjustable precision taper roller bearings - Clearly arranged selector levers for feed rate selection - Enclosed design of the quick-shift feed gearbox - Gears and shafts are hardened and ground, run in oil bath in precision bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Bed slide reverse/forward can be switched via shift spindle - Central lubrication on carriage - Leadscrew cover - Emergency stop button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Fast, simple, and tool-free adjustment via clamping lever - Highly ribbed prism bed, induction hardened and precision-ground from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED work lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protected cable and hose guidance - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for square tool bits 25 mm - Digital position indicator DPA 21 - Glass linear scales Dimensions and Weights Length approx. 3450 mm Width/Depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges Centre height: 280 mm Distance between centres: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Spindle Speeds Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total connected load: 8.5 kW Supply voltage: 400 V Line frequency: 50 Hz Coolant System Coolant pump output: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Todpfx Aqjx Dzxastob Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder mounting height: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread Cutting Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Feed Travel Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 1710 mm Feed Range Longitudinal feed: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system - Emergency stop punch button - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure Tsdpfx Ajzi Evgjqtjb - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine is on display. Optiturn L28 HS CNC lathe - directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe equipped with Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron - High-quality spindle bearing - Emergency stop push-switch - Centralized lubrication system - Reference switches - Maintenance-friendly protective enclosure - Rear maintenance access panel - Safety switch on the front sliding door - Turret positioned behind the turning center (left-hand turning tools) - Linear guides - Software package “SINUMERIK 808D on PC” included (practical training software allowing workpieces to be programmed and simulated offline on a PC; free to download) - Includes two-year SIEMENS warranty Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 3.75 kVA Spindle - Drive motor (S1 operation): 2.2 kW - Torque drive motor (S1 operation): 14 Nm - Torque at spindle: 28 Nm - Spindle mount: DIN 6350 A2-3 - Spindle taper: 5C - Spindle bore: Ø 30 mm Coolant System - Coolant pump power: 95 W - Tank capacity: 25 liters Machine Data - Center height: 169 mm - Center distance: 430 mm - Swing over cross slide: Ø 200 mm Todpfx Aqszi Er Iotob - Swing over bed: Ø 300 mm Speed Range - Spindle speeds*: 40 - 4,000 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum tool shank size (square): 16 mm - Maximum boring bar diameter: 16 mm Precision - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed Rate - X-axis: 10,000 mm/min - Z-axis: 12,000 mm/min Machine leasing available via Siemens Finance (subject to liquidity).

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn Premium CNC lathe, direct from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control system. • Heavy-duty design • Renishaw probing arm for manual tool measurement • Ball screw drive with enhanced accuracy, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoder for highest precision • 45° slant-bed design for particularly large components • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool positions and driven tools • Hardened and precision ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling switch and emergency-stop strike switch greatly facilitates program setup • Belt-type chip conveyor • Work lamp for full illumination of the workspace • Coolant system with cleaning gun Linear guides • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret • All 12 stations powered by an integrated motor designed for speeds up to 4,000 rpm Machine bed • Heavily ribbed • 45-degree slant • High stiffness and durability • Facilitates chip removal SAFETY Integrated – Setup operations with door open • Functional safety also protects against high costs! Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Manage network drives • 3-D simulation • Path tracking SIEMENS OSS Plus additional packages • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 Dimensions and weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work areas Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-axis (optionally ex works) Angular accuracy: 51" Repeatability: 20" Motor torque X-axis: 11 Nm Z-axis: 11 Nm Speed range Speed range: 30 – 4000 rpm Rapid traverse speed X-axis: 24 m/min Z-axis: 30 m/min Electrical data Supply voltage: 400 V Line frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck through-hole diameter: 51 mm Slant-bed angle: 45° Tailstock Taper: MK 5 Tsdpfxoymk Uke Aqtjb Quill travel: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Drive motor power, continuous S1: 11 kW Drive motor power, S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque, S6-30% duty: 140 Nm Feed force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool changer Type: Servo VDI 40 – DIN 5480 Number of tool positions: 12 Drive motor power: 4.82 kW Permissible maximum speed at tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is located in the showroom and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC – The OPTIMUM premium CNC turning machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Heavy-duty construction · Compact design · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle implemented as motor spindle · 45° slant bed for particularly large machining diameters and unobstructed chip discharge into the chip tray · Hydraulic three-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for high rapid traverse speeds on all axes Tedpfx Aqsymlhrjtjb · Faster tool change speed · High hydraulic clamping force · Heavy-duty machining without vibration, for automated machining and high efficiency even under extreme conditions · Rigid linear guides ensure long service life with maximum static and dynamic stiffness · Device for manual tool measurement · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop switch makes program setup significantly easier · Belt-type chip conveyor for efficient removal of chips · Work light for complete illumination of the working area · Coolant system with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · Additional SIEMENS material defect liability and free online/on-site service OSS Plus; see "SIEMENS OSS Plus Package" on page 117 · 1 year basic maintenance contract included Machine specifications Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 operation: 11.6 kW Torque drive motor S1 operation: 65 Nm Drive motor S6-30% operation: 14.4 kW Torque drive motor S6-30% operation: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck passage: Ø 45 mm Hydraulic chuck: Ø 170 mm Coolant system Coolant pump output: 700 W Tank capacity: 160 liters Hydraulic system Hydraulic pump output: 1.5 kW Tank capacity: 36 liters Machine data Max. turning diameter: 220 mm Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over bed: 500 mm Slant bed: 45° Speed range Spindle speeds*: 30 - 6,000 min⁻¹ Tool changer Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeat accuracy: ±0.004 mm Positioning accuracy: ±0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed force, dynamic X-axis: 3.6 kN Z-axis: 3.6 kN Feed rate X-axis / Z-axis: 30 m/min Motor torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Stanje: potreben popravila (rabljeno), Leto izdelave: 2006, Funkcionalnost: nefunkcionalno, premer struženja: 450 mm, potovalna razdalja osi X: 303 mm, pomik po osi Z: 1.160 mm, skupna masa: 10.000 kg, premer nihanja nad prečno desko: 700 mm, model krmilnika: Siemens 810D ShopTurn, Opozorilo: Glavni pogonski motor trenutno ne deluje; potrebna je kontrola oz. popravilo. TEHNIČNE PODROBNOSTI Največji premer obdelovanca: 450 mm Premer obdelovanca nad strojno mizo: 700 mm Premer obdelovanca nad rezkalno strojno mizo: 500 mm Največja dolžina obdelovanca: 1.100 mm Hod osi X: 303 mm Hod osi Z: 1.160 mm Ločljivost osi C: 0,001° Največje število vrtljajev vretena: 3.500 vrt/min Razdalja med centri: 1.230 mm Premer vpenjalne glave: 315 mm Premer luknje v vodilu: 95 mm Tsdezt Sbkopfx Aqtob PODROBNOSTI O STROJU Nadzorni sistem: Siemens 810D ShopTurn Skupna masa: približno 10.000 kg OPREMA Os C Podporni konic Podpirač Vpenjalni valj Odstranjevalec žagovine Sesalnik

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, OPTIMUM OPTIdrill DH 40 GP – zobniška vrtalna naprava – odlično stanje – malo uporabljena Za prodajo je na voljo visokokakovostna zobniška vrtalna naprava OPTIMUM OPTIdrill DH 40 GP v zelo dobrem stanju. Naprava izvira iz zasebne delavnice in je bila uporabljena le občasno, zato ni naprava za neprekinjeno proizvodnjo. Deluje brezhibno in jo je seveda mogoče pregledati in preizkusiti na licu mesta. Tehnični podatki - Proizvajalec: OPTIMUM - Model: OPTIdrill DH 40 GP - Vrtalna zmogljivost v jeklu: 40 mm - Zobniška vrtalna naprava z mehansko regulacijo hitrosti - Samodejni pomik vretena - Vrtenje v levo/desno - Natančen steber in robustna delovna miza - Vreteno MK4 - Sistem za hlajenje (če je na voljo) - Delovanje na 400 V trifazni tok Stanje - Tehnično brezhibna - V zelo dobrem stanju - Majhno število delovnih ur - Brez potrebe po popravilih - Takoj pripravljena za uporabo Kakovost izdelkov OPTIMUM je znana v strokovnih krogih. DH 40 GP je stabilna, vzdržljiva naprava z visoko natančnostjo. Nova cena: 3.804 Ogled Napravo si lahko ogledate in preizkusite po predhodnem dogovoru. Po dogovoru lahko pomagamo pri natovarjanju. Tsdpfsztl Tmjx Aqteb Zasebna prodaja, brez garancije ali možnosti vračila.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 293 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2115011184, - Heavy-duty design - Compact construction - SIEMENS servo motors on all axes - All servo motors equipped with integrated encoders for maximum precision - 30° slant bed design for especially large machining diameters - Improved, unobstructed chip flow into the chip tray - Hydraulic 3-jaw chuck Ø 200 mm - Hard and soft top jaws - Standard tool turret VDI 30 with 8 tool stations - Hardened and precision-ground ball screws for high rapid traverse speeds on all axes - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Manual tool measuring device - Tailstock with hydraulic quill - Heat exchanger - Portable electronic handwheel with enabling button and emergency stop switch significantly simplifies program setup - Belt-type chip conveyor ensures efficient chip removal - Chip cart - Halogen work light for complete illumination of the work area - Coolant system - EMC (Electromagnetic Compatibility) - SINUMERIK 828D Basic ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailor-made financing options adapted to your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure a smooth and punctual process, so you have nothing to worry about. Tsdeyzr Snepfx Aqtjb 📞 Feel free to contact us for further information or a non-binding quote. We offer professional and personal advice. Subject to prior sale, changes, and errors!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Ranges Chuck diameter: 150 mm Chuck actuation: Hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Todpoymkwrjfx Aqtsb Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Bar capacity diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tool positions: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous-duty drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool holder height/width (square): 20 x 20 mm Max. boring bar holder diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety device • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling operator panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 interface, USB port, and 230 V power outlet • Electromagnetic compatibility (EMC) • Six leveling feet • Operator's tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant detection and machining • ShopTurn step programming • Manage network drives • 3-D simulation • Graphic tracking Control • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways • Robust flat-bed guides Ball Screw • High rapid traverse speeds in all axes • Reduced wear • High positioning and repeat accuracy