Optimum Optiturn Th 4620D nakup rabljenega (2.985)

Stanje: novo, Leto izdelave: 2025, For current prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in bed gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Kdedpoq Ukbpefx Abxen Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system pump output: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Maximum tool post height: 25 mm Spindle taper: MK 6 Tailstock: Tailstock taper: MK 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Threads: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 41 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module thread pitches: 34 Travel: Cross slide travel: 125 mm Compound slide travel: 285 mm Carriage travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Stanje: novo, Natančen vodilni in povlečni vretenast stružnica Znamka: OPTiturn Model: TH 4210 Kdsdpfx Abjdbgxcexen Art. št.: 3462050 Stanje: Nova naprava Višina konice: 210 mm Razdalja med konicami: 1.000 mm Standardna oprema: - Podstavek stroja - Štirikotni nosilec za orodje - LED strojna svetilka - Redukcijska puša MK 6/MK 4 - 2 fiksni centrirni konici MK 4 - Fiksna luneta, 15–105 mm - Sledilna luneta, 10–65 mm - Zaščitni pokrov za vpenjalno glavo, električno zaščiten - Naprava za hlajenje - Komplet menjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 1.600 obr/min, potovalna razdalja osi X: 368 mm, pomik po osi Z: 2.900 mm, skupna višina: 1.925 mm, skupna širina: 1.525 mm, skupna masa: 3.820 kg, največja dolžina izdelka: 5.278 mm, število osi: 2, Horizontal lathe from 2022. This Optimum OptiTurn TH 8030D features a maximum turning diameter of 800 mm and a turning length of 250 mm. It is equipped with a robust spindle chuck and a rapid traverse speed of 3,800 mm/min. If you are looking for a high-quality lathe, you should consider the Optimum OptiTurn TH 8030D that we are offering for sale. Contact us for further details regarding this machine. • Type and Highlights • Lead and feed screw lathe, offering high flexibility, precision, and efficiency • Prepared for digital position indicator (see optional equipment) and quick-change tool post (see optional equipment) • Shipping Information • Packaging dimensions: Length 4,770 mm, Width 1,150 mm, Height 1,840 mm • Weights: Gross 4,480 kg, Net 3,870 kg • Technical Data • Load capacity: 1.4 t/m • Working areas: - Max. height: 400 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Bed width: 400 mm - Max. width: 3,050 mm - Swing in bed gap: 1,035 mm - Turning length in bed gap: 250 mm • Spindle speed range: - Number of speeds: 16 • Rapid traverse: - Rapid traverse speed: 3,800 mm/min - Max. duration of rapid traverse: 5 min (30 min. pause) • Electrical Data: - Drive motor rating: 11 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Electrical connections: Total rated value 12 kW • Coolant System: - Coolant pump capacity: 150 W • Spindle: - Spindle chuck: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 105 mm - Spindle taper Ø113 (taper 1:20) mm • Tool holder: max. clamping height 32 mm • Tailstock: - Tailstock taper: MK 5 - Tailstock quill stroke: 235 mm - Tailstock quill diameter: 90 mm • Thread cutting: - Metric thread pitch mm/rev (54 pitches) - Inch thread pitch 80 - 7/16 TPI (60 pitches) - Diametral pitch 7/8 - 160 (42 pitches) - Modular pitch 0.25 - 60 mm/rev (46 pitches) • Travel: - Top slide travel: 230 mm - Saddle travel: 2,900 mm - Cross slide travel: 368 mm • Feed: - Longitudinal feed range: 0.044 - 1.48 mm/rev (25 feeds) - Cross feed range: 0.022 - 0.74 mm/rev (25 feeds) • Build Features and Safety - Hardened and ground Z-axis guideways - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Precisely machined saddle; all guides adjustable via gib strips - Top slide swivel range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Shafts, gears, and main spindle run in oil bath - Gears smooth, hardened, and ground with 2 adjustable precision tapered roller bearings - User-friendly lever for feed rate adjustment - Enclosed rapid traverse gearbox - Gears and shafts hardened and ground, running in oil-bath in precision bearings - Handwheels decoupled and tested to EN 23125 - Dual-channel right-left switch, tested to EN 23125 - Switches with lifecycle calculation, tested to EN ISO 13849 - Right/left travel engaged via control shaft at the carriage - Central lubrication at the carriage - Coolant system with separate tank, level indicator, and oil separator; easy and complete drainage and cleaning per DIN Kdsdpfxoyxncde Abxon - Lead screw drive - Emergency stop mushroom switch, motor protection switch, lockable main switch

Stanje: novo, Swing diameter 560 mm Turning length 1910 mm Swing diameter over bed slide 355 mm Swing diameter in bed bridge 790 mm Centre height 280 mm Turning length in bed bridge 170 mm Spindle speeds 12 (25-1600) rpm Tailstock taper MK 5 Quill stroke 180 mm Quill diameter 75 mm Spindle mount DIN ISO 702-2 No. 8 Spindle bore 80 mm Spindle taper MK 7 Longitudinal feed 35 / 0.059 - 1.646 m/min Face feed 35 / 0.020 - 0.573 m/min Total power requirement 8.5 kW Machine weight approx. 2,560 kg Space requirement approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty machine featuring high flexibility, precision, and cost efficiency. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guides adjustable via gib strips - Forward/reverse operation on carriage, switchable via leadscrew Kdedpfxjucgr Is Abxsn - Dual-channel safety electronics - Central lubrication in the carriage - Cross slide adjustment range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable precision tapered roller bearings - Switches with life cycle calculation, tested according to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function per EN 23125 on X and Z axes - Gears and shafts hardened and ground, running in precision bearings in oil bath - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Emergency stop slam switch, motor protection switch, lockable main switch - Emergency stop device, foot-operated - Tailstock for taper turning, adjustable ±10 mm - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment using clamping lever - Cable carrier for gentle cable and hose guidance - Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Thread dial indicator scale adjustable Scope of delivery: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5 - TH 5620V: Reducing sleeve Ø113 mm / MK 5 - Fixed centre MK 5 - Fixed and revolving centre MK 5 - Quick-change tool post 7-C - Tool holder 32 x 150 type D for square tool bits - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° Ksdpfxok Egrps Abxjdn - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: novo, Leto izdelave: 2026, OPTIturn TU 2004V – Lathe with Stepless Speed Control and Digital Speed Display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed readout Precision Engineering Sturdily ribbed prism bed made of cast steel, induction hardened and precision ground Hardened and ground bed guides Hardened spindle nose (DIN 6350) Guaranteed spindle nose run-out accuracy better than 0.009 mm Automatic longitudinal/lead screw drive Equipped with longitudinal, cross, and compound slides Selectable forward/reverse rotation on control panel Emergency stop button Chuck guard Thrust bearing Leadscrew mounted in two sintered bearings Wide threading range via change gear set Simple and quick speed changes via V-belt Change gear transmission EMC filter class B (approved for domestic use) Equipment details: - Digital speed indicator - Easy-to-read digital speed display - Chip guard on compound slide - Four-way tool post, rotatable - Roll-threaded trapezoidal spindle (leadscrew) - Tailstock adjustable for taper turning - Tailstock quill and handwheel with fine adjustable scaling 0.02 mm - Main spindle hardened and mounted in adjustable precision taper roller bearings - Taper roller bearings in P5 quality - Cylindrical centering receiver - Hardened spindle nose with 21 mm spindle bore - Chuck with run-out accuracy better than 0.04 mm Scope of delivery: - 3-jaw chuck Ø 100 mm, self-centering - Fixed centre MK 2 - Fixed centre MK 3 - Splash guard - Chip tray - 4-way tool holder - Change gear set - Operating tools Model: OPTIturn TU 2004V Item No.: 3420310 Technical Data Power supply: 230 V / 1 Ph ~50 Hz Spindle motor power: 600 W Spindle taper: MK 3 Spindle bore: 21 mm Passage of 3-jaw chuck: 20 mm Tool post mounting height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Number of steps: 2, speed electrically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Kdjdpfx Aecnxrcsbxen Metric thread pitch: 0.25 – 3 mm/rev (14) Imperial thread pitch: 44 – 8 TPI (12) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Stanje: novo, Precizni stružnica z vodilno in vlečno vreteno Znamka: OPTiturn Model: TM 4010 D Art.-št.: 3403045 Stanje: Nov stroj Višina konice: 200 mm Razdalja med konicama: 1.000 mm Hitrost vretena: 70 - 2.000 min⁻¹ (8 stopenj) Standardna oprema: - 3-osni digitalni prikazovalnik DPA 31 PLUS - Podnožje stroja - Trivrateno vpenjalo 200 mm - LED strojna svetilka - Redukcijska puša MK 4/MK 6 - Fiksna centrirna konica MK 4 - Fiksna luneta - Gibljiva luneta - Nosilec za hitri menjavalec orodij, osnovni tip E Ksdoilup Nepfx Abxedn - Nosilec za stružne nože ED - Pokrov vpenjala, električno zavarovan - Polnjenje z oljem - Orodje za upravljanje - Navodila za uporabo

Stanje: novo, Leto izdelave: 2026, Precizni stružnica s vodilno in vlečno vreteno Znamka: OPTIMUM Model: OPTiturn TZ 4 Art. št.: 3432240 Stanje: novo Višina konice: 200 mm Kdjdpfjgqw U Rsx Abxen Razdalja med konicama: 800 mm Št. vrtljajev: 45 - 1.800 min⁻¹ (16 stopenj) Serijska oprema: - 3-osni digitalni prikaz DPA 32 - fiksna centrirna konica MK 3 - hitromenjalni držalo za rezilo, velikost B - držalo za stružno rezilo BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm - premična luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za odrezke - LED strojna svetilka - orodje za upravljanje

Stanje: novo, Natančni vodilno-vlečni stružnica Ksdsh I N Sbepfx Abxjdn Proizvajalec: OPTiturn Model: TM 3310 D Kataloška št.: 3403025 Stanje: Novi stroj Višina konice: 165 mm Razmak med konicami: 1.000 mm Hitrost vretena: 65 - 2.000 min⁻¹ (9 stopenj) Serijska oprema: - 3-osni digitalni prikazovalnik DPA 31 PLUS - Trivraten 160 mm vpenjalni tulec - Električno zavorni glavni motor - Podstavek stroja z lovilcem ostružkov - Štirikratni nosilec orodja - LED strojna svetilka - Redukcijski tulec MK 5/MK 3 - Fiksna centrirna konica MK 3 - Električno varovana zaščita vpenjalnega tuleca - Set izmenjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: novo, Precizni vodilni in vlečni vretenasti stružnica Proizvajalec: OPTIMUM Model: OPTiturn TZ 4V Art. št.: 3432245 Stanje: Nov stroj Višina konice: 200 mm Razdalja med konicama: 800 mm Obratov: 50 - 3.000 min⁻¹ brezstopenjsko nastavljivo prek 2 stopenj menjalnika Kedpfx Aog Hkmrsbxjdn s SIEMENS inverter variabilnim pogonom Standardna oprema: - 3-osni digitalni prikazovalnik DPA 32 - digitalni prikazovalnik vrtljajev na vretenu - fiksni centrirni konus MK 3 - hitromenjalni nosilec orodja velikost B - nosilec stružnega noža BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm - gibljiva luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za ostružke - LED strojna svetilka - servisno orodje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 30 mm, hitrost vretena (min.): 40 obr/min, potovalna razdalja osi X: 145 mm, pomik po osi Z: 465 mm, največja hitrost vrtenja: 4.000 obr/min, širina na sredini: 650 mm, višina središča: 150 mm, nosilnost: 1.200 kg, globina grla: 4.000 mm, For sale is an as-new CNC lathe from the brand OPTIMUM, model OPTIturn L28HS. The machine is in like-new condition, originating from a vocational training institute (BFI), and was used exclusively for training purposes (setup and program transfer). Technical data: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Center height: 150 mm Distance between centers: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Kedpsy D Hkqjfx Abxjdn Speed range: 40–4,000 rpm Spindle mount: Iso 702-1 No.3 – Type A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool turret: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Required installation space: 1,655 x 1,485 x 1,955 mm Note: The machine hours can be read out on site if you have the necessary knowledge. Since the machine was only used for training purposes, very low operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized Europe-wide upon request, subject to additional costs. Prices are plus VAT. Inspection available by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell one? For further information or to get in touch, visit our website.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, OPTIturn TH 4010D Lathe A precise, gear-driven lathe with digital position display, center height/center distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45–1800 rpm, spindle bore diameter 52 mm, spindle foot brake, with automatic longitudinal and cross feed, CAMLOCK chuck interface, universally applicable workshop machine. Including machine base with chip drawer, LED lamp, coolant system, etc. Fully equipped engine lathe. Hardened and ground bed guideways Spindle mount Camlock DIN ISO 702-2 No. 5 Guaranteed spindle nose concentricity better than 0.015 mm Gears and shafts are hardened and ground, running in an oil bath on precision bearings Motor circuit breaker DC 24 Volt electrical system Lockable main switch Forward/reverse operation on carriage selectable Removable chip tray with guide rails Safety handwheels with disengagement function on X- and Z-axes Emergency stop device with foot pedal Machine base with tool compartment on the right-hand side. Digital Position Indicator DPA 21 User-friendly membrane keypad, splash-proof, sealed, and anti-glare Increased working accuracy Reduced error rate thanks to clear design X, Y/Z0, Z-axis with 8-digit display each Supplied sensor for spindle speed detection Glass scales on all three axes Connection voltage: 400 V Drive motor power: 2.4 kW Protection: 16 A Spindle taper: MK 6 Spindle mount: Camlock No. 5 Spindle bore: 52 mm Center height: 205 mm Center distance: 1000 mm Swing over bed Ø: 410 mm Swing over cross slide Ø: 270 mm Swing without gap bridge Ø: 540 mm Turning length in gap bridge: 165 mm Bed width: 206 mm Spindle speed: 45–1800 min⁻¹ Kdodpjykngrsfx Abxjn Number of gear steps: 16 Travel of top slide: 100 mm Travel of cross slide: 195 mm Longitudinal feed: 0.043–0.653 mm/rev Number of longitudinal feeds: 48 Cross feed 0.015–0.206 mm/rev Number of cross feeds: 48 Metric thread pitches: 0.4–7 mm/rev Number of metric thread pitches: 42 Imperial thread pitch: 70–4 TPI Number of imperial thread pitches: 42 Maximum tool shank height: 16 x 16 mm Tailstock taper: MK 3 Tailstock quill stroke: 130 mm Quill diameter: Ø 45 mm Dimensions L x W x H: 1920 x 740 x 1555 mm Weight: 750 kg

Stanje: novo, Swing diameter: 360 mm Turning length: 1000 mm Swing diameter over bed slide: 360 mm Centre height: 180 mm Spindle speed: 70–2400 rpm Total power requirement: 2.2 kW Machine weight approx.: 680 kg Space requirement approx.: 2000 x 1500 x 900 mm Equipment: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mounting: Camlock DIN ISO 702-2 No. 5 - Motor protection switch - Main motor electrically braked - Switchable left/right rotation at the bed slide - Dual-channel safety electronics Kdsdpjw U U Tmsfx Abxon - Switch verified for lifecycle calculation according to EN ISO 13849 - Perfectly running main spindle guarantees high load capacity due to precision taper roller bearings - Equipped with a safety device to prevent simultaneous operation of thread cutting and feed mechanism - Safety handwheels with disengagement function on X and Z axes - All feed gearbox gears made of steel, hardened and ground; all shafts run in needle bearings; all components lubricated in an oil bath - Simple feed operation - One change gear position - Control cabinet with extended Optimum control - Coolant pump with coolant tank and level indicator – tank is removable for easy cleaning - LED machine lamp integrated into machine housing - Machine base in robust steel construction - Emergency stop mushroom switches on both right and left sides - Lockable main switch Special accessories: Incl. three-jaw chuck Incl. quick-change toolholder

Stanje: rabljeno, Leto izdelave: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, signs of use present - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guideways adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide adjustable range ±90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Gear wheels operate smoothly, are hardened and ground, mounted with 2 adjustable precision taper roller bearings - Clearly arranged selector levers for feed rate selection - Enclosed design of the quick-shift feed gearbox - Gears and shafts are hardened and ground, run in oil bath in precision bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Bed slide reverse/forward can be switched via shift spindle - Central lubrication on carriage - Leadscrew cover - Emergency stop button, motor protection switch, lockable main switch Kdodsx Dzxajpfx Abxen - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Fast, simple, and tool-free adjustment via clamping lever - Highly ribbed prism bed, induction hardened and precision-ground from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED work lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protected cable and hose guidance - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for square tool bits 25 mm - Digital position indicator DPA 21 - Glass linear scales Dimensions and Weights Length approx. 3450 mm Width/Depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges Centre height: 280 mm Distance between centres: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Spindle Speeds Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total connected load: 8.5 kW Supply voltage: 400 V Line frequency: 50 Hz Coolant System Coolant pump output: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder mounting height: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread Cutting Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Feed Travel Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 1710 mm Feed Range Longitudinal feed: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: nepreverjeno, premer struženja nad ležiščem sani: 560 mm, višina središča: 280 mm, širina na sredini: 1.420 mm, največja hitrost vrtenja: 1.600 obr/min, skupna masa: 2.300 kg, For sale is an Optimum TH5615 lead screw/feed shaft lathe from 2015 (7.5 kW). Designed for precise turning of single parts, small series, or repair parts. With a center height of 280 mm, a center distance of 1,420 mm, a maximum spindle speed of 1,600 rpm, solid construction, and a robust 7.5 kW motor, it is ideal for professional workshops, training centers, or manufacturing facilities with high quality standards. The machine reflects its age, has not been tested, and is being sold in its current condition. Kodpfx Ajxyx E Nsbxodn Our Service Promise: With us, quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you at any time, even after the purchase. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change.

Stanje: dober (rabljeno), Koda: 0415 Znamka: OPTIMUM Kedpfx Abjzfgluoxodn Model: OPTI B 33 PRO - CE standard Stolpni vrtalni stroj z osnovo za les, kovine in razne materiale – CE standard Tehnični podatki: Premer vretena: 16 mm Trofazni motor: 1100 W Št. hitrosti: 9 (vrtljaji vretena na min: 120/210/250/360/400/440/940/1260/1810) Dimenzije mize: 475 x 425 mm, nastavljiva po višini Nagib mize do 45° Vrtenje mize 360° Premer stebra: 92 mm Omejevalnik globine vrtanja Zaščitni pokrov Maksimalna razdalja med vretenom in osnovo: 1180 mm Skupne dimenzije (mm): 500 x 870 x 1700 (v) Teža: 135 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Stružnica Optimum, Tip D420x1000 DPA, Kdjdpfx Aezb Icnobxjn Višina konic: 210 mm Razdalja med koncema: 1.000 mm Hitrost vretena: 45 - 1.800 min-1 Skupna priključna moč: 4,5 kW 400 V / 3 faze ~50 Hz Hladilna naprava: 100 W Vretenina izvrtina, premer palice: Ø 52 mm Tričeljustna univerzalna glava: Ø 200 mm Hladilna naprava Strojna svetilka Podporna luneta Digitalni prikazovalnik Fagor

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Končna cena, saj se uporablja diferencirana stopnja DDV po §25a UstG. Prejmete ustrezen račun! Interna številka artikla: 26043 CNC rezkalni stroj Optimum F100 Leto izdelave: 2007 Stroj prihaja iz javne izobraževalne ustanove. Krmiljenje: Siemens Sinumerik 802 S base line RS232 vmesnik Vpenjanje: ISO40 Hitrost: 100 - 6000 vrt/min Kedpfxozb I Tgo Abxjdn Pomiki: X 450 / Y 300 / Z 400mm Miza: 920 x 280mm Obremenitev mize: 300 kg + Navodila za uporabo + Navodila za programiranje + Električna shema + Oprema (različni nosilci orodja, med drugim različni MK4 nosilci, vključno z redukcijo osnovnega vpenjanja na MK4) + 2-osni digitalni prikazovalnik Heidenhain + Navodila za uporabo + Črpalka za hladilno tekočino Hitrost: 90 - 1800 vrt/min Pomiki: X 400 / Y 200 / Z 400 mm Podajalna hitrost: 10 - 160 mm/min Hitri pomik: 900 mm/min Moč: 1,6 kW / 380 V Dolžina x širina x višina: 150 x 150 x 175 cm Teža: 1300 kg Stroj je popolnoma delujoč in ga je možno po dogovoru ogledati pod napetostjo na več kot 500 m² ogrevanega skladiščnega prostora.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 760 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, največja hitrost vretena: 10.000 obr/min, model krmilnika: Siemens Sinumerik 828D CNC, POZOR – Posodobitev opreme: Namesto merilne tipalke RENISHAW je vključen Renishaw nastavitveni merilnik orodij! Kdodpfjzap Dwox Abxon TEHNIČNE PODROBNOSTI Pomik X-os: 760 mm Pomik Y-os: 430 mm Pomik Z-os: 460 mm Vpenjalno stožčasto držalo: SK40 Hitrost vretena: 10.000 vrt/min Podajalna hitrost: 10.000 mm/min Velikost mize X: 900 mm Velikost mize Y: 410 mm Maks. teža obdelovanca: 350 kg Število osi: 3 PODROBNOSTI STROJA Krmiljenje: Siemens Sinumerik 828D CNC Menjalec orodij: 24-kratni Pogonska moč: 12 kW Hlajenje orodij skozi vreteno: 30 bar OPREMA Renishaw nastavitveni merilnik orodij Transporter ostružkov

Stanje: novo, Leto izdelave: 2024, New machine Kdjdpfx Aow Rhk Rebxen Year of manufacture: 2024 Robust drilling machine with powerful OPTIMUM brushless drive. The machine's highlight is the menu-guided operation of the drilling/tapping working modes. - Smooth-running and powerful brushless drive - Optimal power transmission via aluminum belt pulleys combined with toothed GATES quality V-belt - High running smoothness thanks to ground multiple-spline driver - Concentricity accuracy guaranteed to be less than 0.015 mm (measured at the drill quill) - Drill spindle with precision ball bearings - Membrane keypad; dirt- and water-resistant, easy to clean - High-quality OPTIMUM keyless drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined drill table with diagonal T-slots, 360° rotatable - Surrounding coolant channel around the drill table - Large, height-adjustable safety shield with safety switch for maximum operator protection - Drill depth stop - V-belt cover with safety switch - V-belt tensioning mechanism - Solid, large base plate, heavily ribbed on the rear side Technical data: - Column diameter: 60 mm - Dimensions (LxWxH): approx. 552 x 445 x 850 mm - Weight: approx. 64 kg - Drilling capacity, steel: 18 mm - Continuous drilling capacity, steel: 16 mm - Tapping capacity, steel: M10 - Drill table: 230 x 245 mm - Speed range: 100 – 6000 rpm - Number of speed ranges: 5 - Total connected load: 1.5 kW - Supply voltage: 230 V - Quill travel: 65 mm - Spindle taper: MT 2 - Throat: 130 mm - Supplied with keyless drill chuck 1–13 mm - Supplied with machine vice BMP 100 Availability: short-term Storage location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2002, Vrtalna zmogljivost 25 mm, vpenjanje vretena MK 3 Kedpfevvi Auox Abxsdn Lokacija: Nattheim

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU Kdjdpfx Ajt U Rm Ijbxen - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: dober (rabljeno), Leto izdelave: 2006, Fina obdelovalna stružnica, stružnica, stružniška miza, vodilno-vlečna stružnica - Proizvajalec: OPTIMUM, vodilno-vlečna stružnica tip D320X920 - Strojna postelja: kaljena - Dolžina struženja: 930 mm - Premer struženja nad posteljo: 320 mm - Premer struženja brez postelje: 500 mm - Premer struženja nad suportom: 180 mm - Vretenasta odprtina: Ø 40 mm - Hitrosti vretena: 65 – 1800 obratov/min - Trije čeljustni vpenjalnik: Ø 160 mm - Konus konjička: MK3 - Pogon: 1,5 kW - Oprema: 2x lunete, Multifix držalo za orodje, glej slike Kedezd Eqyspfx Abxjdn - Dimenzije: 730/1590/V1310 mm - Teža: 525 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Bandsaw, semi-automatic saw, metal saw, metal bandsaw, frame metal saw Toptech / Optimum GB 4240, used machine Manufacturer: Toptech / Optimum Model: GB 4240 Year/month of manufacture: 2013/06 Dimensions: 2200 x 1100 x 2000 mm Electrical specifications: 400 V / 50 Hz / 4 kW Blade size: 34 x 1.1 x 4320 mm Blade speed: 19-86 m/min - Hydraulic vice - Adjustable feed Material capacity: 400 x 400 mm Kjdjm Akwzspfx Abxedn

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 720050, Ponudba 26083 Tehnični podatki: - Višina konic / razdalja med konicama: 210 / 1500 mm - Največji premer struženja nad ležiščem / nad prečnim suportom: 420 / 270 mm - Največji premer struženja pri odstranjeni mostni letev: 640 mm - Dolžina mostne letve postelje: ca. 270 mm - Premer vretenaste odprtine: 58 mm - Stožec vpinjala konjička: MK 5 - Pomik pinole konjička: 180 mm - Hitrost vretena: 45 – 1800 min⁻¹ - Podolžni pomiki: 0,031 – 1,70 mm/obr. - Prečni pomiki: 0,14 – 0,784 mm/obr. - Pomik zgornjega suportnega vozička: 128 mm - Pomik prečnega suportnega vozička: 285 mm - Metrski navoji - Colski navoji - Pogon: 400 V / 7,5 kW - Oprema: konjiček, trivrato vpenjalna glava, hitromenjalni nosilec orodij, digitalni prikaz - Potrebni prostor cca: D 2850 x V 1500 x Š 1200 mm Kedpfxozc Iycj Abxsdn - Teža cca: 2000 kg