Optimizacija Žage Salvacut 5000 nakup rabljenega (6.271)

Stanje: novo, Leto izdelave: 2025, New optimization saw SALVACUT 5000 from SALVAMAC Innovative high-speed optimizing saw with optimization and removal of wood defects, featuring dual drive with upper rollers and a lower feed belt with independent control. Fpsden E Sl Rspfx Aplsg Based on an idea by Salvador Christian.

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Fpodpfx Aow Sy T Hsplsg Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / through-feed system Fpsdpfxjt Ir Nqs Aplog Outfeed table 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 6400 x 1500 x 1780 mm Total Power Requirement: 19 kW Weight: 1800 kg Optimizing Cross-Cut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Minimum / maximum workpiece width: 20–220 mm - Minimum / maximum workpiece thickness: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Max. tolerance per side of workpiece: 10 mm/m - Wood type: soft or hard - Minimum trimming length: 80 mm - Max. feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW Fedpfowt Ua Eex Apljpg - Conveyor belt motor: 0.75 kW - Beam lift motor: 0.37 kW - Extraction diameter: 2 × Ø120 mm - Table height: 900 mm - Overall dimensions: L=6400 mm, W=1500 mm, H=1780 mm - Weight: 1800 kg Standard Features: - Infeed and marking station with servo drive - Infeed conveyor and saw stroke each with individual servo drive - 2.5 m discharge conveyor with fluorescence sensor and ejector - Saw blade with integrated scrap air nozzle - User-friendly 10.1'' TFT touchscreen - Air tank for stable pressing force - Powerful servomotor - Fully enclosed safety guard for quiet and safe operation - Efficient production—can replace 4–8 sets of conventional manual cross-cut saws - Saves labor and floor space - Safe operation - Can be combined with a high-speed four-side planer to form an efficient, automatic production line.

Stanje: zelo dobro (rabljeno), GreCon Type 2004 Optimizing Cross-Cut Saw with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec. Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Fpjdpfx Ajn Hwl Aepljg Net weight: approx. 1,800 kg Was completely overhauled and then not used again Location: Austria, near Ried im Innkreis

Stanje: rabljeno, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Fpjdpfx Apewhf Ipjlog Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Dimter Optimizing Crosscut Saw 350 with increased working height 1400 mm Cross feed as shown in pictures Crosscut saw Fpjdpsncc Icefx Apleg Control cabinet Scanner interface Sorting line 6500 mm length with 3 pushers Waste flap Machine has already been dismantled and is immediately available Machine was fully functional until dismantling Transport can be organized

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit Fpedpfx Aev A Htkoplog - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm Fodpev A Htdofx Aplepg - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant Fpedpfxov A Hr Ts Apleg - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Fjdjvz Hz Espfx Aplopg Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 3000x1070x1200 mm Gewicht 1150 kg Gesamtleistungsbedarf 10 kW Fjdpfx Aevz Hzxoplspg Optimierungskappsäge OPTIMAX 100 - Sägemotor 7,5 kW - Drehzahl 3200 U/min. - Vorschubmotor 2,0 kW - Vorschubgeschwindigkeit stufenlos regelbar bis max. 80 m/min. - Schnittgeschwindigkeit bis zu 80 Takte/min. - Sägeblatt Ø 455 mm - Sägeblattbohrung 30 mm - Schnitthöhe 100 mm (gemäß Schnittdiagramm) - hohe Schnittgenauigkeit +- 1 mm - min. Werkstücklänge 300 mm - min. Abstand zwischen der Markierung 20 mm - min. Werkstückgröße 300 x 30 x 10 mm - PLC Steuerung mit Touch-Screen für einfache Bedienung + Kappschnitt Fix-Längen-Modus + Sequentieller Kapp-Modus (10 verschiedene Maße speicherbar) + Kappschnitt von markierten Kreidestrichen + Kappschnitt Fix-Längen und von markierten Kreidestrichen - Einlauf-Rollentisch rechts 1200 mm - Auslauftisch links 1000 mm - Druckluftanschluss 8 bar - CE Konformität - Abmessungen L=3000, B=1070, H=1200 mm - Gewicht 1150 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 260105, premer žaginega lista: 800 mm, skupna masa: 2.960 kg, dolžina mize: 700 mm, Oprema: CE označba, TEHNIČNI PODATKI Min. premer žaginega lista: 790 mm Maks. premer žaginega lista: 800 mm Premer osi žaginega lista: 40 mm Dolžina vstopne mize: 700 mm Dolžina izhodne mize: 700 mm Fodjxq Au Ajpfx Apljpg PODROBNOSTI O STROJU Glavna moč motorja: 15,0 kW Dimenzije in teža Dimenzije (D x Š x V): 3.600 x 2.550 x 2.100 mm Teža: 2.960 kg OPREMA CE označevanje

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? Fpedowbknbopfx Apljg To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Spoštovani, ponujamo vam naslednjo napravo za nakup: Koordinatni merilni stroj Keyence XM-5000. Stroj se prodaja z opremo, kot je dokumentirana na fotografijah in navedena v besedilu oglasa. Lokacija: 40764 Langenfeld POZOR! Naprava izvira iz stečajnega postopka. Prodajamo jo na dražbi za najvišjo ponudbo po nalogu upnika/banke. Fsdpfx Asy Iaayepljpg Gre za zaprto dražbo. O trenutni najvišji ponudbi ne dajemo informacij. Vaša ponudba postane z vnosom preko e-pošte zavezujoča. Prosimo, sporočite vašo zavezujočo ponudbo do 13.05.2026 do 10. ure. Po zaključku dražbe boste o izidu obveščeni v 72 urah.

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Fodpoy Ehnajfx Apljpg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 500 kg, Varilna vrtljiva miza, L manipulator, pozicioner, odlično stanje, z dodatnim vpenjalnim diskom vključenim. Funkcije: vrtenje, nagibanje (obrnjeno na glavo), brezstopenjsko nastavljiva hitrost. Mehanska nastavitev višine: 800 mm - 1100 mm. Iztek: 1000 mm. Gradbena višina: 1800 mm. Dolžina: 3000 mm. Širina: 1100 mm. Premer vpenjalnega diska: 1000 mm. Fpjdpfsylkn Iox Aplsg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Mobile coil cart FORSTNER AG 5000 b2mf 1500 Maximum coil width: 1500 mm Fedomv Hv Aopfx Aplopg Load capacity: 5000 kg Inner diameter: 360 - 630 mm Outer diameter: 1100 mm Equipped with 4-arm spindle Double-supported decoiler with hand brake and steel wheels for mobility

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- Fodpfx Aswbh Ifjpljpg IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- Fpodpfxjwbil Sj Apleg IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: dober (rabljeno), Inox tank 5000 L with agitator and cooling system. In good condition. Fjdpfsvr E N Nox Aplopg Equipped with an integrated pipe around the tank for cooling purposes.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. Fpjdpfxsvu Syye Apleg TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, številka stroja/vozila: B0508A0463, TRUMPF TruBend Cell 5000 – Komórka gięcia zrobotyzowanego | Rok produkcji: 2015 Prasa krawędziowa TruBend 5230 Zrobotyzowany system gięcia BendMaster Sterowanie: TASC 6000 (programowanie robota i prasy przez interfejs maszyny) Parametry prasy krawędziowej: Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Numer seryjny: B0508A0463 Czasy pracy: Fpjdew Eilyopfx Aplsg Czas załączenia maszyny: 33 789,3 h Układ hydrauliczny: 8 528,8 h Czas pracy belki naciskowej: 1 119,9 h Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 została zaprojektowana z myślą o produkcji seryjnej wymagającej wysokiej precyzji. Zintegrowany robot umożliwia wydajne gięcie przy minimalnym udziale operatora. Stan: bardzo dobry, regularnie serwisowany Demontaż, załadunek i transport mogą zostać zorganizowane

Stanje: rabljeno, Ventilator 2,2 kW, 5000 m³/h, izpušni ventilator, centrifugalni ventilator, rabljeni stroj Proizvajalec: B és S Ventilátor Tip: FVFH 450/500 Skupne dimenzije: Fpodpfjypvcljx Aplog Širina: 790 mm Globina: 730 mm Višina: 980 mm Leto izdelave: 2017 Pretok zraka: 5000 m³/h Električni podatki: 400 V, 2,2 kW, 4,7 A Tlak: 800 Pa

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CNC hydraulic press brake Fodjy It Rxepfx Aplepg Nominal force: 200 tons (≈2000 kN) Maximum bending length: 5000 mm Application: Precise bending of steel and other sheet metal Key geometric parameters: Distance between uprights: ~4800 mm, throat depth: ~320 mm, max. opening height: approx. 480 mm Stroke (Y-axis): approx. 200 mm Movement and axes: Y1–Y2 axes: synchronized hydraulic/servo control X axis (backgauge): CNC-controlled, servomotor R axis: height adjustment (optional CNC) (optional): Z1–Z2 axes (lateral positioning of backgauge fingers) CNC control – typical models: Delem DA-53T / DA-58T / DA-66T, alternatives from Cybelec Functions: 2D/3D bending programming, automatic stroke and force calculation, stop position calculation, tool and material database Main technical components: Hydraulic system: synchronized cylinder pair Automatic crowning: compensation for deflection Tool clamping: AMADA-compatible quick release clamping Backgauge: CNC-controlled positioning Power and physical data: Main motor: approx. 13.5 kW Weight: approx. 19–20 tons Dimensions: approx. 6.1 × 1.9 × 2.9 m Technological capabilities (typical), carbon steel bending: approx. 6–8 mm (over a length of 5000 mm)