Noris Plastic Gmbh & Co. Kg Noris- Iztiskalnik Mini 20/25 D nakup rabljenega (121.634)

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Hodpfx Agohx Elfexel Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: novo, Leto izdelave: 2026, Cuvette de sablage sous pression 200 l, mobile, pour chantier ou usage stationnaire. Hodpfeynr E Tsx Agxol Robinetterie montée en toute sécurité sous la poignée. Très bien adapté aux utilisations intensives sur chantier. Composition : - Réservoir sous pression 200 l - Tamis de préfiltration - Couvercle de protection contre les intempéries - Séparateur d'eau - Détendeur - Réglage de l'air de transport (débit d’air pour la cuve et le tuyau de sablage) - Tuyau de sablage Ø25 mm, 10 m - Buse de sablage Venturi Ø8 mm (consommation d'air à 6 bar env. 3,57 m³/min) - Vanne de mélange d'abrasif, pièce en Y caoutchoutée pour une moindre usure - Filtre à air respirable avec tuyau d'air 10 m - Casque de sablage Systèmes de sécurité : - Interrupteur homme mort avec câble de commande - Dégazage rapide commandé En option : - Poignée agrandie avec support pour tuyau - Tête de sablage humide - Chauffage pour air respirable - Châssis de transport avec seau Hobbock et couvercle pour plusieurs heures de sablage sans remplissage - etc. Fabriqué en Allemagne

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Width: 2050mm Depth: 935mm Height: 955mm Hedpfxjfnh Rvj Agxol Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts.

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 15.15.20.RB75, available with or without roller conveyor. Blasting chamber dimensions: W=1150, D=1150, H=930 mm. Includes one TÜV-certified 20L pressure vessel with conical outlet hopper. One abrasive dosing valve with pneumatically controlled abrasive quantity regulation. Integrated sealing cone with guide tube. One compressed air connection with pneumatic shut-off valve and branch for control air. One pressure regulator for adjusting the blasting pressure. One blasting hose DN19. One handpiece with boron carbide venturi blasting nozzle, 8mm. One pair of blasting gloves. Dust extraction filter unit, capacity 2000 m³/h, 2.2 kW. Hodpfx Agega I R Eexsl

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification Hsdpfx Aeng Ax Segxjl OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: P18096N, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 20 t, hod: 160 mm, skupna višina: 2.150 mm, skupna masa: 180 kg, Bonjour, Nous vous proposons, sans engagement, une presse d’atelier d’occasion de marque Rodcraft, type WP 20F. Fabricant : Rodcraft Pneumatic Tools GmbH & Co. KG Type : WP 20 F Hsdpfx Ajygm N Dogxol Année de fabrication : 2000 N° de machine : P18096N Course hydraulique : 160 mm Force de pression : 20 t Dimensions de la machine : 2150 x 960 x 660 mm Dimensions de transport : 2150 x 980 x 750 mm Poids de la machine : 180 kg Remarque : Les données techniques ci-dessus proviennent de brochures du fabricant ou d'autres sources. Nous ne pouvons garantir l’exactitude ni l’exhaustivité de ces informations. Contenu de la livraison : 1 presse d’atelier d’occasion Rodcraft, type WP 20F Domaine d’utilisation et état : La machine a été utilisée occasionnellement dans un atelier de maintenance pour l’extraction ou le montage de roulements, etc. La machine est entièrement fonctionnelle et en bon état. Nous serions ravis que cette machine retienne votre attention. Votre service commercial Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. Hsdpfxjng Exae Agxjl The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible Hodpfxonh R Eke Agxjl • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame Hodpot S Rduefx Agxsl 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker Hjdpfxjw Ivk Te Agxjl - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t - Za tirni sistem - Baterijski pogon Hjdpfx Ageyyxidsxsl - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance

Stanje: novo, Leto izdelave: 2026, Tlačna peskalna kabina za notranje peskanje cevi z vrtljivo mizo in ročnim načinom peskanja - Filtrirna naprava - Vrtljiva miza s prizmo za vstavljanje kot podpora cevi - Pogonska notranja cevna šoba Hodpfsyn Inwsx Agxjl - Možnost shranjevanja programa: pot gibanja, hitrost podajanja, funkcija izpihovanja - Zunanja peskalna šoba z oscilacijo (opcija)

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. Hsdpfx Aodrtanogxol The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2026, Vis sans fin de transport d'abrasif de 5 m avec capot doseur pour installation en tant que vis de transfert transversal vers l'élévateur à godets en bout de hall (insertion d'abrasif sur toute la largeur du hall à l'aide d'un chariot élévateur). - 5 m + sortie vers l'élévateur à godets, vis à ailettes pleines Ø250 mm avec spires de 5 mm d'épaisseur. Hodpoynz Idefx Agxjl - Peut servir de réservoir d'abrasif. La grenailleuse se réapprovisionne automatiquement si nécessaire via une sonde de niveau. - Selon la profondeur d'installation, permet d’effectuer des opérations de grenaillage jusqu'à 24 heures sans nettoyage du hall. - Nettoyage du hall possible en 10 minutes avec un chariot élévateur ou un chargeur sur pneus. - Très faibles coûts d'entretien et de réparation par rapport à un plancher convoyeur complet. - Particulièrement adaptée pour des pièces très lourdes. - Coûts d’acquisition inférieurs à ceux d’un plancher convoyeur complet. - Coûts de fondation réduits par rapport à un plancher convoyeur complet. - Peut être insérée sur toute la largeur du hall, contrairement à une fosse de balayage. - Garantie longue durée très élevée.

Stanje: novo, Leto izdelave: 2026, Mobilní tlakový pískovací kotel 140 l pro použití na stavbě nebo pro stacionární použití. Armatury bezpečně umístěny pod držadlem. Velmi vhodné pro robustní stavební provoz. Skládá se z: - Tlaková nádoba 140 l - Předfiltr - Ochranný kryt proti povětrnostním vlivům - Odlučovač vody - Redukční ventil - Nastavení množství dopravovaného vzduchu (množství vzduchu v nádobě a pískovací hadici) - Pískovací hadice Ø25 mm, 10 m - Pískovací tryska Venturi Ø8 mm (spotřeba vzduchu při 6 bar cca 3,57 m³/min) - Ventil na směšování abraziva typu Y, pogumovaný pro snížené opotřebení - Filtr dýchacího vzduchu s hadicí 10 m - Pískovací helma Bezpečnostní vybavení: - Bezpečnostní tlačítko (dead man spínač) s ovládacím kabelem - Řízené rychlé odvětrání Volitelné příslušenství: - Větší držadlo s držákem hadice - Hlava pro mokré tryskání - Ohřívač dýchacího vzduchu - Transportní rám s nádobou Hobbock a víkem jako nadstavba pro vícedenní tryskání bez doplňování Hjdjynr E Hspfx Agxol - atd. Vyrobeno v Německu

Stanje: novo, Leto izdelave: 2026, Prenosni tlačni peskalni kotel 100l za gradbišča ali stacionarno uporabo. Armature varno nameščene pod ročajem. Zelo primeren za robustno uporabo na gradbišču. Sestava vključuje: - Tlačni kotel 100l - Predsito - Pokrov za zaščito pred vremenskimi vplivi - Odvlaževalnik zraka - Regulator tlaka - Nastavitev dovodnega zraka (količina zraka za kotel in peskalno cev) - Peskalna cev Ø25 mm 10 m - Venturi peskalna šoba Ø8 mm (poraba zraka pri 6 bar cca: 3,57 m³/min) - Y-ventil za mešanje peskalnega materiala, gumiran za manjšo obrabo - Filter za dihalni zrak s cevjo 10 m - Zaščitna peskalna čelada Varnostne naprave: - Varnostno stikalo (mrtvi mož) s krmilnim kablom - Krmiljeno hitro odzračevanje Opcijsko: Hedpfx Agjynr Emjxol - Večji ročaj z nosilcem cevi - Glava za mokro peskanje - Grelna enota za dihalni zrak - Transportno ogrodje z vedrom (Hobbock) in pokrovom kot nadgradnjo za večurno peskanje brez ponovnega polnjenja - itd. Izdelano v Nemčiji

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Hodpfx Asu Hl R Togxsl Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V Hodpfx Agjhfwcbexol

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN120XT-HA-X,

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 4.000 kg, dvižna višina: 10.000 mm, napetost baterije: 48 V, lastna masa: 9.000 kg, Splošno: HUBTEX 2125-PU/SO z modelom MQ 40 je električni večsmerni bočni viličar s nosilnostjo 4 tone in prečno kabino. Ta viličar je primeren za skladiščne prostore, kjer sta potrebni maksimalna prilagodljivost in okretnost v ozkih prehodih za premikanje tovora do 4000 kg. M = večsmerno krmiljenje Q = prečna kabina 40 = 4.000 kg 2125 = serija PU = Vulkollan pnevmatike SO = nagibanje in spuščanje vilic, izvlečne vilice do 1500 mm, hidravlično nastavljiva širina vilic Dodatna oprema/Predelava: - Kameri na desni in levi strani vilic z monitorjem v kabini - Pozicijski laser na desni in levi strani vilic - Mehko gibanje pred odlaganjem vilic in pri prečkanju stopnic teleskopskega izvleka Hedpfx Ajx Aqaqogxol

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Hsdjw Ivp Nspfx Agxol

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Hjdpew Ivpvofx Agxjl

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Hedpfega Ehbsx Agxel

Stanje: novo, Leto izdelave: 2025, Kontejnerska peskalna naprava. Hsdpfx Aodkbvcegxjl 5,89 x 2,35 x 2,69 m Kontejnerske peskalne naprave z vgrajenim strojnim prostorom. Plosko transportno dno, polžasti transportni sistem, vedro dvigalo, priprava abraziva, tlačni peskalni kotel 100l, filtrirna naprava, odsesovalno dno, odprtina kot ročna peskalna kabina. Za morebitna vprašanja o tehničnih podatkih nas kontaktirajte pisno ali po telefonu. Osnova strojev je proizvodnja na lokaciji Grossenlüder od leta 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG z dolgoletnimi priznanimi kontakti. Slike lahko vsebujejo dodatno opremo.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years included on all essential components of the blasting system. Hsdpfouwlzyjx Agxsl Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.