Mep Tiger 352 Nc 5.0 nakup rabljenega (5.469)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska krožna žaga za aluminij MEP Cobra 352 nc 5.0 Letnik 2017 Dimenzije lista: 350x32x3,4mm Rezalna hitrost list: 1700/3400 rpm Gbjdpswu Tz Refx Abrou Kot reza : od -45°do +45° Kapaciteta reza: pri 0°: okroglo: 120mm, kvadrat: 105mm , pravokotnik 180x70mm Zaslon na dotik Teža stroja: 605kg

Stanje: rabljeno, Leto izdelave: 2017, Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 mm Cutting capacity at 90°: flat 180x70 mm Cutting capacity at 45° left: round 110 mm Cutting capacity at 45° left: square 95 mm Cutting capacity at 45° left: flat 135x60 mm Gbodpfjy Ruvbjx Abrsu Cutting capacity at 45° right: round 120 mm Cutting capacity at 45° right: square 100 mm Cutting capacity at 45° right: flat 135x60 mm Vice opening 180 mm Saw blade dimensions 350x32x3.4 mm Speed 1700/3400 rpm Machine weight approx. 600 kg Semi-automatic mitre saw with semi-automatic operation for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left; saw head swivels 0°-45° to the left. Control is via multi-microprocessor system. Two NC-controlled axes enable up to 1,000 different cutting programs — each with individual quantity and length — to be programmed for the same material. - New centralized control console on an articulated arm for easy operation from any working position. Emergency stop button accessible at all times. - Fieldbus communication system with dual microprocessor and serial port. - 20-character x 4-line display showing the following technical parameters: Number of programmed and executed cuts, saw blade thickness, feed length, cutting time, ammeter, as well as more than 100 diagnostic messages and warnings. - New – Display and logging of alarm and error messages with incident review capability. New – Material feed of 600 mm with cutting motor and ball screw mounted on opposing ball bearings. - New – Low voltage control panel: polyester membrane keyboard with thermoformed, raised pushbuttons and actuation signal. - Programmable saw bow stroke directly from the control panel for adaptation to the material being cut. - Ball-bearing rotary table ensures smooth and precise rotation. - Clamping system with two vises located at the end faces, which can be positioned freely along the longitudinal axis of the workpiece. - Adjustable mechanical stops for quick positioning of the saw head at 0 and 45 degrees right and left angles.

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Gbodpfx Abefg Rlcerou Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120/110 mm Cutting range at 45° (square): 10/95 mm Godpjfg Rlgsfx Abrsbu Cutting range at 45° (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, circular saw automatic machine with semi-automatic function, for sawing aluminium and light metal alloys, designed for use with carbide-tipped circular saw blades. Machine suitable for mitre cuts from 45° right to 45° left. The vertical axis alignment allows for sawing operations with the head inclined from 0° up to 45° to the left. Numerically controlled circular sawing machine equipped with a new Windows CE-based control system, specially developed by MEP for automatic machines.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, Rabljena avtomatska tračna žaga MEP Shark 350 NC HS 5.0 Dimenzije lista: 4640x34x1.1mm Hitrost lista: od 15-115 m/min (inverter) Avtomatski napenjalec lista: 1600kg Avtomatski transporter opilkov Nastavljiv pritisk primežov Kapaciteta reza: okroglo 350mm, kvadrat 350x350mm Gbjdpfx Aswwr Tqsbrsu Leto izdelave: 2020 Dimenzije stroja: 3045x2025x(v)2225mm Teža: 2800kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Rabljena avtomatska hidravlična tračna žaga za kovino MEP Shark 230 nc hs 5.0 Avtomatski polžasti odstranjevalec opilkov Dimenzije lista: 2950x27x0,9 Izbira rezalne hitrosti z variatorjem: od 15-100 m/min Gbjdjtva Nhepfx Abreu Kapaciteta reza: okroglo 230mm, kvadrat 230x230mm Generalno servisiran in obnovljen stroj Letnik: 2015 Max. rezalna kapaciteta je 230 × 230 mm Možnost rezov tudi v polavtomatskem načinu Stroj je v celoti servisiran.

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1,700 / 3,400 rpm Control system: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight: approx. 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Features: - Fully automatic CNC high-performance circular saw * for mitre cuts from 45° right to 45° left * for cutting aluminium and light metal alloys - MEP microprocessor control * Windows "CE" based control system * user-friendly interface * up to 100 cutting programs storable * user interface with 7” touch screen display & mechanical buttons * adjustable/swing-mounted operation panel * display and logging of alarms and error messages * positioning of saw head and movement of feeder via joystick * automatic detection of cutting start position - Material feed with stepper motor and ball screw * with 600 mm stroke * can be repeated for any length cuts - Manual safety hood - Mechanical stops at -45°, 0°, +45° * allow for quick saw head positioning - Pneumatic vice system * 2x pneumatic frontal vices * including vertical vice - Heavy cast iron construction ensures vibration-free operation & maximum precision Godpfx Aexaa Uxebrobu - Saw head can be tilted up to 45° - 2 saw blade speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operating and maintenance manuals

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je žaga MEP z avtomatizacijo Kenning. Območje kotnega reza min./maks.: -45°/60°, premer žaginega lista: 350 mm, premer odprtine: 32 mm, debelina: 2,5 mm, hitrost: 90 obr./min, največja odprtina primeža: 190 mm, največja zmogljivost reza: 115 mm. Dimenzije stroja (X/Y/Z): pribl. 2050 mm/1050 mm/1150 mm, teža: pribl. 450 kg, upravljanje: PC. Dokumentacija je na voljo. Možen je ogled na lokaciji. Gjdpezf Ncpsfx Abrsbu

Stanje: novo, Leto izdelave: 2023, Premer rezanja 350 mm Dolžina traku žage 4640 x 34 x 1,1 mm Višina mize 860 mm Premer rezanja 350 mm Hitrost rezanja 15 – 100 m/min Skupna potrebna moč 4,0 kW Teža stroja približno 2800 kg Potreben prostor približno 2200 x 3200 x 2200 mm Razstavni stroj Aktualna nova cena 55.910 evrov Avtomatska tračna žaga z vodilom z dvema stebroma za serijsko rezanje, zlasti pri materialih, ki se težko obdelujejo, in pri masivnih materialih. S tem strojem vam MEP ponuja stroj, ki je tehnično na najvišji ravni in ima zahvaljujoč uporabi visokokakovostnih materialov izjemno robustno in torzijsko trdno konstrukcijo, ki jo je težko preseči. Izjemno robusten lok žage iz sive litine zagotavlja potrebno stabilnost, ki omogoča impresivne rezultate rezanja, močne stebre iz sive litine, na katerih se lok žage premika po vnaprej napetih linearnih vodilih, pa tudi pri največji obremenitvi zagotavljajo najvišjo natančnost rezanja. Sodoben nadzor stroja (MEP NC 5.0) uporabniku ponuja maksimalno udobje pri upravljanju in zagotavlja nemoteno delovanje. (Nadzor/ocena/korekcija v realnem času) NAJVIŠJA ZMOŽNOST > Dva načina delovanja (polavtomatski in avtomatski) omogočata učinkovito rezanje v vseh pogojih. > Nadzorni sistem omogoča shranjevanje do 100 programov rezanja z različnimi količinami in dolžinami, kar zmanjšuje čas programiranja pri pogosto izvajani delu. > Samodejno zaznana začetni položaj glave žage skrajša čas nastavitve. > Pomik glave žage preko linearnih vodil, ki jih poganjajo hidravlični cilindri z vnaprej napetimi krogličnimi ležaji, zagotavlja zmanjšanje mehanskih vibracij pri rezanju in večjo stabilnost. > Samodejna nastavitev sprednje vodilne glave žage glede na dimenzije rezanega materiala skrajša čas obdelave. > Napetost žage se izvaja preko brezkrtačnega motorja in se nenehno nadzoruje ter samodejno prilagaja nastavljeni minimalni vrednosti. IZJEMNO PRILAGODLJIV > Sistem za pomik s 600 mm hoda je ponovljiv in reže vse dolžine. > Vertikalni par valjev omogoča držanje in usmerjanje vseh vrst palic ali svežnjev, ki se dovajajo. > Vektorjev pogon za brezstopenjsko nastavitev hitrosti rezila od 15 do 100 m/min omogoča rezanje vseh materialov. > Motoriziran odvajalnik žagovine je mogoče namestiti na desno ali levo stran od območja rezanja. LASTNOSTI: Popolnoma avtomatski nadzor – NC 5.0 - Inovativni nadzor na dotik (na podlagi Windows CE) z dodatnimi mehanskimi gumbi za pogosto uporabljene funkcije. - USB-vhod - Joy-stick za ročno upravljanje osi (X-Y) - Nadzorovan spust glave z avtomatskim izravnavanjem preko servo ventila, nameščenega v cilindru, nenehno spremljanje prednastavljenega navora in natančna nastavitev pomika v milimetrih/minuti. - Nastavitev/prednastavitev brezstopenjske hitrosti traku v m/min. Gjdolf Tu Ujpfx Abrsbu - Napetost žage z nadzorom napetosti in prikazom na zaslonu preko elektronskega pretvornika. - Samodejno zaznavanje začetka reza. - Velik barvni zaslon na dotik 7" za prikaz in izbiro vseh funkcij in parametrov stroja ter programiranje v nekaj sekundah.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Gbodpfxofg E Hze Abrju Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: novo, Cutting diameter, round: 230 mm Cutting diameter, square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 - 100 m/min Total connected load: 2.2 kW Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steel, solid and profile materials, with a maximum remnant length of 60 mm. - Maximum cutting cross-section: 230 x 230 mm. - Numerically controlled bandsaw with a new Windows “CE” based IGE system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters. - Safety enclosure in compliance with the latest Machinery Directive EN 13898/2007 safety standards. Gbedpsfg E Hyofx Abrou - New fieldbus communication system with dual microprocessor and serial interface. - Robust cast iron construction (G25) to compensate for vibrations, increase machine stability, and extend the service life of the saw blade.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih Gbedjxdr Rtjpfx Abrju - Uporabniški vmesnik z zaslonom

Stanje: dober (rabljeno), Leto izdelave: 2014, Cutting range 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Godpozkbn Usfx Abrebu Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Current new price approx. EUR 23,000 Special price on request Equipment: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and quick adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with a max. of 9999 pieces and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of the cutting feed, indicated in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cut start - Large, adjustable cast steel guide wheels - Saw band tensioning with tension control and display indication - Carbide band guides for highest cutting precision - Automatic monitoring of cutting load - Quick-action vice * With replaceable clamping and stop jaws - Large, side pull-out chip tray and coolant tank * Fitted with 2 electric pumps for band lubrication and cooling * Coolant gun for machine cleaning - Swarf removal brush for cleaning the saw band - Operating manual in German Manufacturer’s information: If this saw is installed in a network with a residual current circuit breaker (RCD), the breaker should be all-current sensitive and rated not less than 300 mA.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 17370, Funkcionalnost: popolnoma funkcionalen, TIGER 352 SX EVO - POLOAVTOMATSKI VISOKOOBREMENJEN > Konstrucija iz robustne litega železa absorbira vibracije in zagotavlja konstantno kakovost reza ter daljšo življenjsko dobo žaginega lista. > Dvostopenjski menjalnik zagotavlja visoko reznopm zmogljivost in togost. > Pnevmatski vertikalni primež zagotavlja učinkovito in varno vpenjanje tudi pri rezanju cevi. > Nadzorna plošča z relejem za termično zaščito in tuljavo minimalne napetosti zagotavlja najvišjo stopnjo varnosti zanp Godey T Eh Tepfx Abrsbu V kombinaciji z avtomatskim pomikalnim prislonom in tiskalnikom etiket je stroj optimalna rešitev za razrez armirnega jekla v PVC okenskem stavbarstvu. Stroj je v uporabi do junija. Ogled možen pri stranki v 49811.

Stanje: novo, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 350 mm Saw band dimensions 4640x34x1.1 mm Vise opening 355 mm Saw band speed 15-115 m/min Machine weight approx. 2800 kg Space requirement approx. 3050x2190x2200 mm Shark 350 NC HS 5.0, automatic hydraulic band saw in dual-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Powered chip conveyor, installable on either side of the machine (left or right). + Adjustable clamping pressure for the vices. + Infeed carriage with vertical rollers for lateral material support. - Numerically controlled band saw, can also be operated semi-automatically, equipped with the new MEP 50 control, specifically developed by MEP for automatic machines, based on Windows "CE". - 'Clean cut' cycle: The infeed moves the workpiece backward to avoid scoring on the cut surface when the band rises at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7” touch screen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use with real-time monitoring of all cutting parameters. - Automatic detection of the cutting start position. - CNC machine for storing up to 100 cutting programs with various batch quantities and cutting lengths; up to 100 of these can be selected as a sequence. - Heavy-duty cast iron construction to absorb vibrations, ensuring stable cutting accuracy and a long service life for the saw blade. - Hydraulic feed of the saw bow on linear guides with preloaded ball bearing rails. - Hydraulic control unit for opening/closing of feed and front vices. - Infinitely variable saw band speed adjustment from 15 to 110 m/min via vector inverter. - Material feed with stepper motor and ball screw mounted on opposing bearings, 600 mm stroke, repeatable for any length. - Max. remnant piece length 120 mm plus cutting length (OPTIONAL: feeder jaws to minimize remnant to 25 mm plus cutting length). - Cut path monitoring (OPTIONAL) - Material feeder with self-aligning feed vice to handle slightly bent material. - Saw drive wheel is secured by a taper bush for optimal and adjustable axial fixing. - Management software for monitoring/evaluation/correction in real time of the following parameters: - Cutting force - Cutting torque and saw band tension compared to set values - Adjustable saw band guide heads made of steel with combined roller and carbide guides, including control valves for conventional recirculating lubrication. - Prepared for installation of OPTIONAL minimum quantity lubrication system. Gbedjyv Nd Repfx Abrou - Adjustment of the saw band drive wheel for saw blade replacement directly from the operator panel. - Automatic adjustment of the front saw band guide head to material size. - Machine...

Stanje: novo, Saw blade diameter 350 mm Cutting range at 90 degrees: round 115 mm Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.38 t Gjdpefgpdljfx Abrobu Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes Gjdpfx Abjfg E H Ejrjbu - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with vertically guided head sliding on linear guides with ball recirculating rails in the front. - Double gearbox for high transmission power - 4 speeds: 15 / 30 / 45 / 90 rpm Gbedefg Rlbjpfx Abrou - Vice opening: 190 mm - Stroke movement of the saw head programmable directly from the control panel to adjust for cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 350x32x2.5 for solid and profile material - Vice with counterhold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical cuts - Material support arm, also suitable for connection to roller conveyor / loading side - Turntable with additional central axis

Stanje: rabljeno, Leto izdelave: 2001, Premer žaginega lista 350 mm Gbsdpfx Aboyvvpmsrou Odpiranje primeža 190 mm Število vrtljajev 15 / 30 / 45 / 90 min⁻¹ Pogonska moč 1,8 / 2,6 kW

Stanje: novo, Sägeblattdurchmesser 350 x 32 x 2,5 mm 4 Geschwindigkeiten 15/30/45/90 U/min Schraubstock 190 mm Schnittbereich bei 90 Grad: rund 115 mm Schnittbereich bei 90 Grad: vierkant 95 mm Schnittbereich bei 90 Grad: flach 180x95 mm Schnittbereich bei 60 Grad links: rund 90 mm Schnittbereich bei 60 Grad links: vierkant 90 mm Schnittbereich bei 45 Grad links: rund 110 mm Gbjdjyv Nl Ispfx Abrju Schnittbereich bei 45 Grad links: vierkant 95 mm Schnittbereich bei 45 Grad links: flach 125x95 mm Schnittbereich bei 45 Grad rechts: rund 110 mm Schnittbereich bei 45 Grad rechts: vierkant 95 mm Schnittbereich bei 45 Grad rechts: flach 125x95 mm Gesamtleistungsbedarf 1,8/2,5 kW Gewicht 410 kg Zubehör/Ausstattung: Elektropneumatische, halbautomatische Vertikalkreissäge mit Mikroprozessorsteuerung, für Gehrungsschnitte von 60° links bis 45° rechts - Drehteller mit zusätzlicher Mittelachse - Doppellinearführung

Stanje: novo, Model designation Gbodpfx Abjl Sva Iorju SHARK 331-1 NC 5.0 SPIDER

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 352 NC EVO, Automatic circular saw with semi-automatic function, suitable for cutting aluminium and light metal alloys, designed for the use of carbide-tipped circular saw blades. Includes extraction system and material handling (roller conveyors). Gjdpfxjv T U Tge Abrsbu The machine is capable of mitre cuts from 45° right to 45° left. By tilting the head along the vertical axis, it is possible to perform sawing operations with the head inclined between 0° and 45° to the left.

Stanje: rabljeno, Gehrungs krožna žaga MEP, tip Tiger 350 CNC FE Serijska št. 00011818 E, leto izdelave 1995 Območje žaganja pri 90° (krog) Ø 115 mm Območje žaganja pri 90° (pravokotnik) 180 x 95 mm Območje žaganja pri 45° (krog) Ø 110 mm Območje žaganja pri 45° (pravokotnik) 125 x 95 mm Območje žaganja pri 30° (krog) Ø 90 mm Območje žaganja pri 30° (pravokotnik) 90 x 95 mm Območje žaganja (krog) Ø 120 mm Območje žaganja (pravokotnik) 180 x 100 mm Odprtina objemalne naprave, maks. 185 mm Premer žaginega lista 350 mm Kotni rez 60° v levo do 45° v desno Število vrtljajev žaginega lista 15 / 30 / 45 in 90 vrt/min. Moč motorja 1,8 in 2,6 kW Priklop na omrežje 400 voltov, 50 Hz Potreba po stisnjenem zraku 6 bar - CNC krmilnik za do 80 različnih dolžin reza z ustreznim številom kosov ???? Gsdozrpl Dopfx Abrjbu - CNC krmilnik, programirljiva dolžina reza in število kosov - hidravlično-pnevmatsko spuščanje žagne glave - pnevmatsko napenjanje materiala - pnevmatski pritisk - pomik objemalne naprave s servo motorjem in krogličnim vijakom - programirljiva dolžina pomika do 9999 mm - 2 prestavi in 2 hitrosti motorja - sistem za hlajenje v osnovi stroja Potreben prostor (D x Š x V) 2000 x 1100 x 2030 mm Teža 650 kg dobro stanje

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vise 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Easy and fast setting of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 piece counting and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, displayed in mm/min - Saw head positioning and feeder movement via joystick Godpfjxabwhjx Abrjbu - Automatic detection of cut start - Large, adjustable cast steel band wheels - Saw blade tension with blade tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-acting vise * With interchangeable clamping and stop jaws - Large, side-sliding chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant spray gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with a residual current circuit breaker (RCD), ensure this is all-current sensitive and rated not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MPE CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Equipment/features: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – controller and 7” touch-screen display * Simple and fast adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm length - Material feed via stepper motor and ball screw spindle * Single stroke 600 mm, repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, indicated in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start - Large, adjustable cast steel band wheels - Saw blade tension with tension monitoring and display - Carbide blade guides for highest cutting precision Gedpfxoxaa Ewo Abrsbu - Automatic monitoring of cutting load - Vice with quick adjustment * With exchangeable clamping and stop jaws - Large, side-removable chip tray and coolant tank * With 2 electric pumps for blade lubrication and cooling * Coolant gun for machine cleaning - Chip removal brush for blade cleaning - Operating manual in German Manufacturer note - please note: When installing this saw in a network with residual-current circuit breaker (RCD) it must be all-current sensitive (TYPE B) and not less than 300 mA.