Megey Bm-M 1,2 nakup rabljenega (73.173)

Stanje: novo, Leto izdelave: 2026, – Kapaciteta 1,2 mm – Variabilna regulacija hitrosti – Z 9 kompleti valjev – Nožno upravljanje Fedpfx Apsydhlzolepg – Zaviralni motor – Nujna zaustavitev – Dokumentacija – 400V

Stanje: novo,

Stanje: novo, Debelina pločevine 1,25 mm Izsek 130 mm Skupna zahteva moči 0,75 kW Teža stroja cca 180 kg Fpodpsvn U Dnefx Apljg Dimenzije cca 1,1 x 0,6 x 1,2 m Stroj je opremljen z: - izklopom v sili - nožnim stikalom - 8 seti valjev

Stanje: novo, Leto izdelave: 2025, - Capacity: 4 mm - Hydraulic roller adjustment - Foot control - Brake motor - Hydraulic pressure adjustment - Equipped with 3 sets of rolls - Emergency stop Fpsdjq Tdm Aopfx Apleg - 400V

Stanje: pripravljen za uporabo (rabljen), Servo frekvenčni pretvornik Fpodpox Nmnaefx Apljg REXROTH Rexroth Indramat prej je bil vgrajen v DIMTER kapno žago

Stanje: novo, premer spodnjega valja: 56 mm, premer zgornjega valja: 56 mm, premer valja: 56 mm, najv. debelina jeklene pločevine: 1 mm, - Capacity: 1050 x 1 mm - Roller diameter: 56 mm Fjdpfx Aer Ixphoplspg - Conical rolling - Swing-out top roller - Documentation

Stanje: novo, premer zgornjega valja: 46 mm, premer valja: 46 mm, – Capacity 1050 x 0.8 mm – Roller diameter 46 mm – Conical rolling – Swing-out top roll – Documentation Fpsdor Nvhajpfx Apljg

Stanje: novo, premer spodnjega valja: 46 mm, premer zgornjega valja: 46 mm, premer valja: 46 mm, delovna širina: 1.050 mm, – Capacity 1050 x 0.8 mm Fpodpfx Aper H Hanjlog – Roller diameter 46 mm – Conical rolling – Swing-out top roll – Documentation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. Fpedpfx Ajfdkb Teplog When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) Fpsdpeh R Taqofx Aplog - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Fpsdpfxod Tqale Aplog

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) Fpjdpfx Aofdkb Uspleg - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard Fsdpfx Aofdkbhjplepg - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: Fpjdsguk Dkopfx Apleg - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) Fjdpfxjmhhy Nj Apljpg - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Manometer, preizkusni manometer, merilnik tlaka s cevasto vzmetjo, merilna tehnika za tlak in temperaturo, cevasti manometer, tester tlaka, merilec tlaka - Proizvajalec: TGL, manometer 0-10 bar, neuporabljen v originalni embalaži - Tip: 1/BM 20 M 20x1,5 260 Ø - Št.: 13301-B44-01 Fedpfxjyfmr Ae Aplepg - Količina: na voljo 9 manometrov - Cena: na kos - Dimenzije škatle: 310/310/H70 mm - Teža: 4,6 kg/kos

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright Fpodpfx Apsf Tv T Nslsg With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Pesa feed conveyor belt 1.2 m belt conveyor 60 cm Manufacturer: Pesa Length: 1195 mm Belt width: 600 mm Protection class: IP54 Supply voltage: 3x400 VAC Fodpfx Ajmf Tkuoplepg Power: 0.37 kW Belt speed: 0.6 m/s Year of manufacture: 2008 More articles – new and used – can be found in our shop! International shipping costs on request!

Stanje: rabljeno, Wire electrode, welding wire, welding wire Fedpfx Aechlyceplspg - Metal powder - Cored wire - Net weight: 15 kg - Quantity: 87 packages available - Price: per package - Total weight: 15.6 kg/package

Stanje: dober (rabljeno), Regalna kad, lovilna kad, talna kad, paletna kad, zbiralni rezervoar, zbiralna paleta Fsdpfjfcvf Nsx Aplspg -Kapaciteta zbiranja: 220 litrov -na: transportnem vozičku -Notranje mere kadi: 1140/730/V270 mm -Cena: na kos -Količina: 2 kosa -Dimetrije: 1210/800/V570 mm -Teža: 72 kg

Stanje: rabljeno, Roller conveyor, gravity conveyor, roller conveyor belt, roller track - Roller conveyor: non-driven Fpodpfx Apolp Uziolog - Roller width: 590 mm - Roller diameter: 50 mm - Roller pitch: 275 mm - Dimensions: 1200/620/H1110 mm - Weight: 61.5 kg

Stanje: rabljeno, največja dovoljena obremenitev: 23.520 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2017, Leto izdelave: 2017, Oprema: ABS, Proizvajalec: De Buf Model: BM 12-36-2SPR z Theam TSR15 transportnim trakom Leto izdelave: 2017 Stanje: Zelo dobro Serijska številka: YA9BM36217G222919 Ref. št.: 7810 Datum prve registracije: 10.04.2017 Fsdpfx Apowwy Nyolopg Bobnasta zavora: ? ABS: ? Premi: SAF Vzmetenje: Zračno Dimenzija pnevmatik: 425/65R22.5 Preostala globina profila: 40 - 40 % Orodna omara: ? Skupna masa: 36.000 kg Lastna masa: 12.480 kg Nosilnost: 23.520 kg Daljinsko upravljanje: ?

Stanje: kot nova (razstavni stroj), enofazni, 1950 kg, odsesavanje prahu, vakuumska miza s štirimi posamezno krmiljenimi sekcijami, vodno hlajen vreteno 6 kW 24000 vrt/min, ročni krmilnik A2. Fodpfxohh Anrj Aplepg

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, dolžina opore: 3.600 mm, dolžina police: 11.200 mm, višina okvirja: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 1, 1 vrstna paletnih regalov (M45113615-3) Dolžina 11,2 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, Vsako polje ima 3 nivoje prečk, nosilnost polja 3000 kg. - 4 okvirji (RM4511 – RAL5019) - 8 talnih plošč, podložni material, pritrditveni material - 16 talnih sider (ZZBA1210) - 18 posameznih prečk (T3615 – RAL2008) - 1 oznaka nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani Prevoz / dostava: Fpjdpfsv Urchjx Aplog - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča / mesta montaže - razklad s tovornjaka opravi kupec z lastno dvižno opremo - dobava po celotni Nemčiji, razen otokov; dobava v države EU po individualnem dogovoru.

Stanje: novo, skupna dolžina: 5.000 mm, skupna širina: 4.250 mm, 21.25 m² Mezzanine Storage Platform, Top Edge 300 cm, 500 kg/m² Load Capacity, Immediately Available from Stock, Forklift/Floor Jack Accessible, Modular System Platform, Steel Mezzanine, Warehouse Level Fpedpsy Rkt Njfx Aplsg Specifications: - Length: 5,000 mm - Width: 4,250 mm - Size can be expanded upon request - Clear height beneath platform: 2,612 mm - Column grid: 4,605 x 3,850 mm - Plus 200 mm floor covering overhang - Columns, cross-bracing, and tie rods powder-coated in RAL 7016 - Main & secondary beams galvanized - Flooring: 38 mm particle board P6, top natural finish & underside white - New stock from Wietmarschen warehouse - IMMEDIATELY AVAILABLE Composition: - 04 x columns - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross-bracing - 02 x tie rods - 10 x particle boards - Including connecting material & screws -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2,590.00 net €3,082.10 gross You will receive an invoice showing VAT separately. Transport: Delivery can be arranged via our partner freight forwarder upon request. Shipping cost depends on postal code. Assembly: Our trained staff are available to professionally assemble and dismantle your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering to assembly. Interested or have questions? Contact us easily by message or phone call. Our phone number is listed on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.