Naprava za oblaganje in obrobljanje

MEGEY BM-M-125

Stanje: novo, najv. debelina jeklene pločevine: 4 mm, - Capacity 4 mm - Hydraulic roll adjustment - Foot switch - Brake motor - With 4 sets of rolls - Emergency stop - 400V Ihodpfx Afsgg Nq Hj Tst

Stanje: novo, Delivery pressure: 10 bar Effective delivery rate: 252 L/min Tank capacity: 90 l / bar Ihsdpsvkiztefx Af Tot Number of cylinders: 1 unit Motor: 400 Volt / 1.5 kW Speed: 777 rpm Machine weight: approx. 70 kg Dimensions (L x W x H): 0.97 x 0.5 x 0.9 m

Stanje: novo, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Ihodpfxsd Eqqqe Af Tet Approx. Weight: 480 kg Total Power Requirement: 1.1 kW Bending Radius: 2 mm Sheet Thickness: 3 mm Sheet Length: 1,050 mm Technical Data Sheet Rolling Machine Roller Diameter: 90 mm Rolling Speed: 6 m/min • Asymmetric roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swiveling top roller • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating manual in GERMAN EXTRA: hardened rollers EUR 900,-- See the catalogue at the following link:

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Iodpfxsdzqble Af Toht Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: xxxx, Ref. No. 24211 Technical data approx.: Ihodpot H I Aqefx Af Tot - Max. working width: 1020 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.5 mm - Manual back gauge adjustable up to: 550 mm - Front angle stop - Sheet metal hold-down device - Table size: 1100 x 650 mm - Working height: 900 mm - Required space (approx.): W 1800 x H 1450 x D 850 mm - Weight (approx.): 400 kg - Mobile (on wheels)

Stanje: novo, Fastech 3-Roll Plate Bending Machine FRS 2050 x 140 Technical specifications: Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Motorized lower roll adjustment • 2 x digital readout Sheet width: 2050 mm Sheet thickness: max. 4.5 mm Pre-bending thickness: 4.0 mm Iodpfx Afohzq D Hs Toht Roll length: 2050 mm Roll diameter: 140 mm Minimum bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: • Electrically driven top and bottom rolls • Swing-out top roll • Conical bending device • Asymmetric roll arrangement • Self-braking main motor • Separate control and operating panel • Safety cable • Values refer to St-37 / 240 N/mm² • CE mark

Stanje: novo, Leto izdelave: 2025, MZP-02 2m Profiling Machine The MZP machine is used for beading thin sheets in order to provide rigidity to thin sheet metal, specifically for the ventilation duct sector. The high-quality steel rollers can process 2 mm aluminium sheets and 1.2 mm black steel sheets. The machine is equipped with transport wheels, allowing for quick repositioning within the workshop. Machine specifications: - Motor with controller - Chain-driven roller system - Fully welded frame - Easy to transport thanks to wheels - Pressing force can be easily adjusted with adjustment screws - Adjustable gap between upper and lower shafts - Lower and upper rollers are made of hardened long-life steel - Practical machine providing years of reliable use for professionals in the ventilation industry. Technical data MZP-02 2000: - Working length: 2000 mm - Sheet thickness range: 0.40 / 1.20 mm - Motor power: 0.37 kW - Length: 2240 mm - Width: 530 mm - Height: 1050 mm Iodpfjfwxm Dsx Af Teht - Weight: 360 kg

Stanje: novo, Sheet length: 1050 mm Sheet thickness: 1.0 mm Approx. weight: 0.185 t Dimensions (LxWxH): 1.4 x 0.7 x 1.12 m Ihsdsd Eqrpopfx Af Tet Details: - with base frame - asymmetric roller arrangement - with pre-bending feature - wire insertion groove in lower and rear rollers - adjustment of lower roller via central lever - with gear drive - operating manual in GERMAN and ENGLISH For catalog, see the following link:

Stanje: novo, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Iedpfohzq Dqjx Af Tjht Sheet width: 1250 mm Sheet thickness max.: 3.0 mm Sheet pre-bending thickness: 2.5 mm Roll length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (LxWxH): 1950 x 900 x 1130 mm Motor: 1.1 kW Features: - Electrically driven upper and lower rollers - Swiveling upper roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope All values based on St-37 / 240 N/mm² CE-marked

Leto izdelave: 2021, Stanje: novo, - Capacity: 1070 x 2 mm - Conical rolling - Removable top roll Iedpfx Afehc Uvme Tsht - Foot control - Emergency stop - Documentation - 400V