Macc Special 702 Ga nakup rabljenega (16.866)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 6.380 mm, Visoko učinkovita polavtomatska tračna žaga z odlično natančnostjo reza za rezanje srednje velikih in velikih palic ter profilov. Robustna konstrukcija in lok, ki drsi navpično po dveh stebrih, zagotavljata stroju potrebno togost in natančnost žagalne enote. - Moč motorja: 4 kW - Velikost žagalnega traku: 6380x41x1,3 mm - Največji kot rezanja: 45° desno - 60° levo Godpfjxr Uk Sox Anljiu - Sorazmerno dimenzionirana vztrajnika - Enota za čiščenje ostružkov s ščetko - Stroj z avtomatskim obračanjem za programirane kotne reze - Minimalno mazanje - Transporter za ostružke !Pozor, ponudba vključuje samo stroj, valjčne proge in dolžinski omejevalnik je mogoče kupiti posebej.! Nova cena stroja znaša 53.140 EUR.

Stanje: novo, Bandsaw with gravity descent MACC SPECIAL 411 CSO New CE The machine’s fundamental features (blade support rigidity, flywheel sizing, blade guides, blade tensioning) have been thoroughly studied to prevent blade fatigue, increase longevity, and improve cut straightness and speed. – Bandsaw with gravity descent motion of the saw bow controlled by a hydraulic circuit, manual bar feed and vise closing, manual head return – Vertical pivot rotation on play-free, adjustable taper roller bearings – Blade drive with two-speed motor and special gearbox with bronze gear and hardened, ground worm screw Gjdpeficb Tofx Anloiu – Properly sized flywheels – Robust blade guides made with sealed guide bearings and adjustable carbide wear plates – Blade tensioning achieved via electromechanical device with micro-switch blade rotation control – Vise with rapid approach device – Safety devices on the blade cover, control handle, and blade – Hydraulic cylinder for controlled descent – Cutting thickness: 1.2 mm – Cutting range: 45° left, 60° right – Adjustable stop for identical-length cuts – 24V low-voltage electrical system – 0.06 kW electric coolant pump for blade cooling – Base equipped with chip collecting drawer and removable coolant tray – Machine prepared for pallet truck handling

Stanje: rabljeno, Leto izdelave: 2007, Rabljena polavtomatska tračna žaga MACC special 650di Kot reza od -60° do +60° Dimenzije rezila: 5270 x 34 x 1.1 mm Digitalni prikazovalnik kota Kapaciteta reza pri 0° - okroglo 460mm - kvadrat 450x450mm - pravokotnik 620x450mm Godpfx Anoyzadloljiu Teža stroja : 1250kg Stroj je v celoti servisiran.

Stanje: novo, Leto izdelave: 2026, Highly efficient series production Clamping – Enter cutting dimension – Start. Automatic saws with feed are a standard for efficient series processing of bar and bundle material. Maximum cutting range: up to 290 x 320 mm. Features Automatic hydraulic bandsaw with NC control for cutting from 0° to 60° to the right, compliant with all CE safety standards The machine is equipped with 9 programs, each consisting of up to 99 steps, allowing for a total of approx. 890 cutting positions, including corresponding piece counter Functionality: Material feed, closing of stationary vice, blade rotation, application of emulsifiable coolant, downward movement of the saw bow until the cut is complete, and return of the feed carriage to the preset position, saw bow return and stop of blade rotation triggered by coolant distribution, cycle repetition Hydraulic feed – cut by cut, without length limitation Numerical control of quantity and cutting length Hydraulic control unit with adjustable cutting pressure Saw blade tension monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic blade 3200 x 27 x 0.9 mm Cutting width 1.2 mm Material feed stroke 600 mm Hydraulic unit motor: 0.75 kW Electric pump for blade cooling: 0.09 kW You are welcome at any time to inspect the machine in our production or demonstration hall. Please feel free to contact us. Gedofww Sqopfx Anleiu We look forward to your message! Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, dolžina tračnega lista: 2.825 mm, Visokozmogljiv kotni tračni žagalni stroj Popolnoma hidravlični polavtomat Tehnični podatki: Obseg rezanja: Okrogla cev 90° 230 mm 45° 200 mm Pravokotnik 90° 300 x 170 mm 45° 190 x 150 mm - Hitrost rezanja 40 + 80 m/min - Dimenzije žaginega traku 2825x27x0,9mm Oprema: - Dvojni kotni rez, desno 60° in levo 45° - Hitro približevanje primeža k materialu - Podnožje z električno črpalko za hladilno tekočino in povratnim ventilom - Polavtomatsko delovanje preko brezstopenjsko nastavljivega potopnega cilindra z izklopom preko končnega stikala Gjdpfxox H Rpio Anlsiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Bandsäge MACC SPECIAL 411 CSO, Baujahr 2019 Zustand: sehr gut - Sägemaschine mit schnittführendem Sägeband, hydraulisch gesteuertem Absenken - Spannstock manuell betätigt - Manueller Rücklauf des Sägekopfs - Vertikale Rotation auf Bolzen mit spielfreien, einstellbaren Kegelrollenlagern - Hochleistungs-Bandantrieb durch Zweigangmotor und Spezialgetriebe mit Bronzeschnecke, gehärteter und geschliffener Schneckenwelle - Blattspannung per Handrad manuell einstellbar, Überwachung durch Endschalter Godpspmaubsfx Anljiu - Schraubstock mit Schnellspannvorrichtung - Unfallschutzvorrichtungen an Schwungradabdeckung, Bedienelement, Sägeband und Außenschutz - Hydraulikzylinder für kontrollierten Absenkvorgang - Schnittstärke: 1,2 mm - Schnittbereich: 45° links, 60° rechts - Verstellanschlag für Serienschnitte gleicher Länge - 24 V Steuerspannung (Niederspannung) - 0,06 kW Antriebspumpe für Bandkühlung - Untergestell mit Späneauffangwanne und herausnehmbarem Kühlmitteltank - Zuführförderer

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2009, barva: drugo, Leto izdelave: 2009, Lastna teža: 9.210 kg Os 1: levo 16 mm, desno 16 mm Gijdpjwbdy Rjfx Anlou Os 2: levo 16 mm, desno 16 mm Os 3: levo 16 mm, desno 16 mm

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2009, barva: drugo, Leto izdelave: 2009, Lastna teža: 9.210 kg Godpfjwhn S Dox Anloiu Os 1: levo 14 mm, desno 14 mm Os 2: levo 16 mm, desno 16 mm Os 3: levo 16 mm, desno 16 mm

Stanje: rabljeno, TBMA Galahad bag emptying installation, stainless steel bag emptying machine Type: 750 special All parts which come into contact with the product are made of stainless steel (RVS). Other parts are coated. The machine is in used condition and is sold as is. Includes various feed conveyors Giedpfx Answvli Aelou Optional: empty bag screw compactor Optional: pallet tipper with lift table Capacity: 400 bags/hour See our other listings VMA Wekerom

Stanje: zelo dobro (rabljeno), Rabljeni plinski paneli za polnilne rampe – kisik, argon, dušik Na voljo je več profesionalnih plinskih panelov / plinskih razdelilnikov za polnilne rampe za jeklenke, primernih za jeklenke s kisikom, argonom in dušikom. Gedpfjy N S Hhox Anleiu Podrobnosti: Proizvajalec: SIAD GAS SPECIALI Opremljeni z visokotlačnimi manometri do 300 bar in fino regulacijo Za polnjenje jeklenk in distribucijo plina Prevzem po dogovoru. Za vprašanja ali zanimanje se prosim obrnite za več informacij.

Stanje: novo, Semi-automatic bandsaw for cutting solid bars and structural sections of medium and large dimensions, offering high yield and excellent cutting precision. The robust frame ensures the necessary rigidity and accuracy of the cutting unit. The blade is driven by a motor with inverter control and a special reducer featuring a bronze gear and hardened, ground worm shaft. Properly sized flywheels. Gedpfx Aefh R Tujnljiu Sturdy blade guides, equipped with sealed bearings and adjustable carbide (widia) plates. Blade tension is achieved via an electromechanical device with micro-switch control for blade rotation. Safety devices include accident-prevention guards on the flywheel cover and blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Blade cleaning device with brush. Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for blade cooling Vice jaw height: 250 mm Vice jaw length: 200 mm Working table height: 760 mm Machine weight: 1250 kg / 12260 N

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Godpfxsfibd Ts Anleiu Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: novo, Semi-Automatic Bandsaw MACC 320 MS Brand New “CE” Certified Technical specifications sheet attached. Available for immediate delivery, subject to prior sale. Key features of the machine (blade support rigidity, flywheel sizing, blade guides, and blade tensioning system) have been thoroughly engineered to prevent blade fatigue, extend service life, and improve cut accuracy and cutting time. Vertical rotation on pivot with adjustable tapered roller bearings without backlash. Blade drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Properly dimensioned flywheels. Robust blade guides made with sealed bearings and adjustable carbide (Widia) pads. Blade tension achieved via electromechanical device with micro-switch controlled blade rotation. Safety devices on flywheel covers, on the control knob, and on the blade to prevent accidents. Godpfx Anefibfajloiu Cutting thickness: 1.2 mm Cutting range: 0° to 60° to the right Adjustable stop for repetitive cuts. Coolant electric pump 0.06 kW for blade cooling. Operation: Cutting cycle started by pressing the start button, the machine: 1. Closes the vise and starts the blade drive motor 2. Lowers the saw arm for cutting 3. Saw arm returns to the starting position 4. Stops the blade drive motor 5. Opens the vise Manual cutting mode also available. OPTIONAL ACCESSORIES: Single-phase motor 69 m/min Speed variator from 20 to 90 m/min

Stanje: novo, Hydraulic CNC automatic bandsaw for cuts from 0° to 60° to the right, compliant with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with a corresponding piece counter. Operation: Material feed advance. Giedpfx Ansg Np Dxslou Fixed vise closure. Blade rotation and delivery of emulsifiable coolant, descent of the saw bow until cut completion, and return of the feed carriage to the preset dimension. Return of saw bow, stopping of blade rotation and coolant delivery. Opening of fixed vise. Cycle repetition. Step-by-step feed with ball screw drive. Numerical control of quantity and cutting length. Hydraulic unit with adjustable cutting pressure. Blade tensioning through manual handwheel rotation and secured by an electromechanical device. Blade-cleaning brush device. Bimetallic blade 3010 x 27 x 0.9 mm. Hydraulic unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electropump 0.09 kW.

Stanje: novo, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for high-efficiency, precision cutting of solid bars and small profiles. The robust construction provides the necessary rigidity and precision to the cutting assembly. The blade drive features a dual-speed motor, while the special reduction gearbox is equipped with bronze gears and a hardened, ground worm screw. Appropriately dimensioned flywheels and rugged blade guides with sealed bearings and adjustable carbide (Widia) pads ensure durability. An electromechanical micro-switch control enables blade tensioning via wheel rotation. Safety devices are fitted on the flywheel guard and blade, while a swivel worktable for material support and a quick-approach vise complete the machine. Operation: Cutting cycle is started by pressing the start button; the machine: Gedpfxefh R Tye Anloiu 1. Closes the vise and switches on the blade motor 2. Lowers the saw bow for cutting 3. Returns the bow to start position 4. Stops the blade motor 5. Opens the vise Manual cutting is also possible. Cutting speed (m/min): 38–77 Blade thickness (mm): 1.2 Cutting range: 45° left to 60° right Adjustable stop for repetitive cuts Coolant electric pump: 0.06 kW

Stanje: novo, Display promotion. NEW. Nr. 1 unit available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-size profiles, delivering high output and excellent precision. Its robust construction provides the necessary rigidity and accuracy to the cutting assembly. The blade is driven by a two-speed motor and a special gearbox, featuring a complete bronze gear with a hardened and ground worm screw. The well-dimensioned flywheels and robust blade guides are fitted with sealed ball bearings and adjustable carbide (widia) inserts. Blade tensioning is achieved by means of an electromechanical micro-switch that puts the band under tension by rotating the blade. The machine features safety devices on the flywheel covers and the blade, and is equipped with a rotating worktable for material support and a vise with quick-approach device. Gjdpfxjg S Ui Aj Anlsiu Operation: Initiate cutting cycle via start button; the machine: 1. Closes the vise and activates the blade motor 2. Lowers the saw bow for cutting 3. Returns the saw bow to the starting position 4. Stops the blade motor 5. Opens the vise Manual cutting option available. Cutting speed (m/min): 38-77 Blade thickness (mm): 1.2 Mitre cutting range: From 45° left to 60° right Adjustable stop for repetitive cuts Coolant pump output: 0.06 kW Cutting capacities: At 0° (Round / Square / Rectangle): 260 mm / 250x250 mm / 220x330 mm At 45° left (Round / Square / Rectangle): 225 mm / 210x210 mm / 160x225 mm At 45° right (Round / Square / Rectangle): 215 mm / 200x200 mm / 160x210 mm At 60° right (Round / Square / Rectangle): 130 mm / 130x130 mm / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight: 415 kg

Stanje: novo, Brand new from factory No. 1 available for immediate delivery!! “CE” Warranty Made in Italy Cutting Capacity: 0° = Round tube 230 mm – Square 220 mm – Rectangle 170 x 300 mm 45° = Round tube 200 mm – Square 180 mm – Rectangle 180 x 230 mm 60° = Round tube 130 mm – Square 120 mm – Rectangle 110 x 130 mm TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable tapered roller bearings, backlash-free. Blade drive by two-speed motor and special reduction unit with bronze gear and hardened/ground worm screw. Wheels appropriately dimensioned. Robust blade guides with sealed roller bearings and adjustable carbide plates. Blade tensioning by electromechanical device with micro-switch blade rotation control. Vice with quick-locking device. Gijdpofibfgefx Anlou Safety features on driving wheel guard, control handle, and blade. Cut thickness 1.2 mm. Cutting angle range from 0 to 60° right. Adjustable stop for repeat cuts. Low voltage system 24 V. Coolant electric pump 0.06 kW for blade cooling. The main features of the machine (blade support rigidity, wheel sizing, blade guides, blade tensioning) have been carefully engineered to prevent blade deformation, increase blade life, and improve cut straightness and cutting speed.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: pnevmatičen, največja hitrost vrtenja: 3.000 obr/min, skupna masa: 640 kg, Oprema: CE označba, dokumentacija / priročnik, MACC TA 400 A CNC je avtomatska krožna žaga, namenjena za razrez aluminija in neželeznih materialov v industrijski serijski proizvodnji. Glavni tehnični podatki Parameter Vrednost Tip stroja Avtomatska CNC krožna žaga za aluminij Premer rezila Ø 400 mm Premer odprtine rezila 32 mm Moč motorja 2,2 kW Napajanje 3 × 400 V Hitrost rezila 3000 obr/min Odpiranje primeža 180 mm Hladilni sistem Emulzijski hladilni sistem Sistem vpenjanja 2 pnevmatska primeža Teža Približno 510–640 kg Dimenzije stroja Približno 3450 × 1700 × 1420 mm Kapacitete rezanja pri 90° Tip profila Kapaciteta Polno okroglo 60 mm Gijdpsy Uvqzofx Anlou Cev / okrogel profil 140 mm Kvadratni profil 110 × 110 mm Pravokotni profil 180 × 100 mm

Stanje: novo, SKF 7026 ACD/P4ADGA precizni stožčasti kroglični ležaj, izvrtina 130 mm, zunanji premer 200 mm, širina 34 mm < nerabljen > v originalni embalaži, 100 % delujoč Gedpexahzmofx Anleiu

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Na voljo je polavtomatska krožna žaga za kovino. Premer žaginega lista: 350 mm, maksimalna odprtina primeža: 170 mm, upravljanje: polavtomatsko. Opremljena je s hidravličnim primežem, integrirano hladilno napravo in upravljalno konzolo. Teža: cca 480 kg, skupne mere D/Š/V: cca 1000 mm/1200 mm/2000 mm. Ogled je možen po dogovoru. Gsdpfx Anjy Uyfcsleiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 21.000 h, Screw compressor, compressed air tank, dryer, oil separator. Location: Mülheim an der Ruhr. Giedpfxowr Nnbo Anlju

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), skupna masa: 1.060 kg, hitrost rezanja: 77.000 mm/min, Metal band saw from 2014. This Macc 381 AV features fully automatic operation, a hydraulic vice, and a coolant system. It offers a cutting capacity of up to 280 mm for round material and up to 290 x 290 mm for square material. The machine is equipped with a swarf conveyor and a numerical control system to enhance efficiency. If you are seeking high-quality machining capabilities, consider the Macc 381 AV machine we have for sale. Please contact us for further details. • Power supply: 3-phase • Main motor power: 0.9 / 1.6 kW • Main motor speed: 700 / 1420 rpm • Hydraulic pump motor power: 0.37 kW • Coolant pump power: 0.09 kW • Wheel diameter: 350 mm • Saw blade size: 3010 x 27 x 0.9 mm • Kerf width: 1.2 mm • Cutting angle: 0° • Maximum vice opening: 320 mm • Jaw height: 150 mm • Table height: 850 mm • Coolant tank capacity: 50 liters Gisdpfxoy Dtu Ae Anlsu • Cutting capacity: • Round: 280 mm • Square: 290 x 290 mm • Rectangular: 290 x 320 mm • Features: • Fully automatic operation • Hydraulic vice • Hydraulic bow movement • Coolant system • MACC4 numerical control system • Blade tensioning system • Blade cleaning brush Additional equipment: • Chip conveyor (auger type)

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Različni stroji za obdelavo kovin, vključno z večjim radialnim vrtalnim strojem Wagner, so na voljo. 1) Stebrni radialni vrtalni stroj Wagner PRC 50, letnik 2011, zmogljivost vrtanja (jeklo): 50 mm, hod vretena: 315 mm, razpon iztega: 350 mm–1600 mm, razdalja med vretenom in osnovno ploščo: 370 mm–1270 mm, število vrtljajev: 2000 min⁻¹, dimenzije stroja X/Y/Z: približno 2500 mm/1100 mm/2900 mm, teža: približno 3500 kg. Stroj ima neznano napako. 2) Stebrni vrtalni stroj Alzmetall AX3/SV, letnik 2000, zmogljivost vrtanja (jeklo): 32 mm, hod vretena: 120 mm, izteg: 293 mm, premer stebra: 115 mm, dimenzije mize X/Y: 515 mm/360 mm, število vrtljajev: 2250 min⁻¹, teža: približno 300 kg. 3) 2x žaga za kovino Macc NTM 350, letnik 1998/2010, premer žaginega lista: 350 mm, zmogljivost reza: 120 mm, teža: približno 450 kg. 4) Tračni brusilni stroj Grit A/S GIS 150, letnik 2014, dimenzije traku X/Y: 150 mm/2000 mm, moč motorja: 4 kW, teža: približno 100 kg. Ogled na lokaciji je možen. Zaželena je prodaja v paketu. Gjdpfxey Eqtie Anleiu

Stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 300 mm Cutting range at 90° round: 100 mm Godpfx Ajl Ra Uionlsiu Cutting range at 90° rectangular: 90 x 90 mm Mitre cutting range at 45° rectangular: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirement: 850 x 600 x 1600 mm

Leto izdelave: 1989, stanje: rabljeno, Funkcionalnost: nepreverjeno, Oblačilni stroj za letve proizvajalca P.A.O. MACC, model DC 4C Gsdpfx Anoytc Dkeleiu