Inverterski polavtomatski žagalni stroj

Macc 411 MS

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I Gtjdpofgyicjfx Afqet • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Gtjdpsfd Abaefx Afqot Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Leto izdelave: 2023, Highly Efficient Series Production Clamping – Enter cutting dimension – Start. Automatic saws with feed are standard in efficient serial processing of bar and bundle materials. Maximum cutting range up to 290 x 320 mm. Equipment Automatic hydraulic sawing machine with NC control designed for cuts from 0° to 60° right, compliant with all CE safety standards The unit features 9 programs, each consisting of up to 99 individual steps, with a total of approximately 890 cutting positions and corresponding piece counter Function: Material feed, closing of fixed vice, blade rotation, distribution of emulsifiable fluid, bow descent Gjdpofww Sqefx Afqstt until completion of the cut and return of the feed carriage to the set position, bow return and blade rotation stop via coolant distribution, cycle repetition Hydraulic feed, cut by cut, without length limitation Numeric control of quantity and cut length Hydraulic control unit with adjustable cutting pressure Blade tension is monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic band 3200 x 27 x 0.9 mm Kerf 1.2 mm Material feed stroke 600 mm Hydraulic power unit motor 0.75 kW Electric pump 0.09 kW for band cooling You are welcome to inspect the desired system at any time in our production/demo hall. Do not hesitate to contact us for more information. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. Gedefh R N Dopfx Afqstt - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: novo, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Article No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: Gedpfx Afecuntzeqjtt - Horizontal vice - Length stop (600 mm) - Saw blade tension monitoring, electromechanical - Chip removal brush - Coolant device - Operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, CNC krmilnik: M720BM Gtsdpfx Aexcqz Iefqjt Kapaciteta Pomik X-osi mm: 260 Pomik Y-osi mm: ±50 (100) Pomik Z-osi mm: 795 Dolžina struženja mm: 705 Maks. premer struženja mm: ø 356 Premer nad posteljo mm: ø 923,8 Premer nad prečno desko mm: 755 Kapaciteta za obdelavo palic mm: 80 C-os stopinje: 0,001° Zgornji revolver Število orodnih mest: 12 Hitrost pogonskih orodij vrt/min: 6.000 Pogonska moč pogonskih orodij kW: 5,5/3,7 (3 min/kont) Čas indeksiranja s: 0,25 Glavno vreteno Hitrost vretena vrt/min: 4.000 Pogonska moč vretena kW: 18,5/15 (25% ED/kont) Premer izvrtine vretena mm: ø91 Konjiček Pomik konjička mm: 734 Držalo: MT5 Oprema Transporter za odrezke Roka za merjenje orodja

Stanje: rabljeno, Leto izdelave: 2001, notranji premer: 450 mm, debelina stene: 11 mm, skupna masa: 3.200 kg, System: Decanter / Centrifuge, used Manufacturer: Hiller Model: DP45-422 Gtodevz A Uzjpfx Afqot Machine No.: 2818 Year of manufacture: 2001 Max. allowable bowl speed: 3,800 rpm Bowl inner diameter: approx. 450 mm Bowl wall thickness: 11.0 mm Bowl material: H2/ST52 Weight: approx. 3,200 kg Permissible density: 1.50 kg/dm³

Stanje: novo, Leto izdelave: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control. - Adjustable hydraulic pressure Gtedpfxjhgihks Afqet - Adjustable bending speed - Fully enclosed table - The ZOPF design allows for quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of accuracy even under high loads. - With the universal tool holder and various tools, you can work with maximum flexibility.

Stanje: novo, Leto izdelave: 2025, Max Ø 114mm. Straight and bent round tubes. Single grinding station. Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical pipes. The ML planetary belt system enables belt grinding without tube rotation in order to deliver the best possible results. The infeed system safely feeds straight tubes into the grinding station to ensure consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Belt speed (m/s): 3-22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Gtodpfxst Eaw Ds Afqot Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: novo, The SSB F 60 Super VT PRO is a powerful pillar drilling machine that is perfectly suited to the demands of workshops. This machine combines state-of-the-art technology with robust design, making it ideal for single-item and small-batch production, as well as for drilling, countersinking, reaming, and thread cutting. Thanks to the electronically controlled servo quill feed and the large touchscreen control display, users benefit from user-friendly operation and flexible adjustment of machining parameters. Featuring a sturdy construction made from high-quality cast iron and a motorized height-adjustable table that swivels ± 45°, the SSB F 60 Super VT PRO is excellently suited for use in steel and hall construction. Additionally, the machine offers an impressive drilling capacity of up to 60 mm and an automatic threading cycle, enhancing efficiency. Take the opportunity to acquire the SSB F 60 Super VT PRO for your projects—request a quote and experience KNUTH quality! Gjdpfx Ajq Rdqnofqett