Mütek Mrz 530 Eco - 15 Kw nakup rabljenega (50.791)

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Gijdod Db N Ijpfx Afwot Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni vijačni kompresor priznane nemške znamke BLITZ Model Monsun Pro Eco 15 – industrijska naprava, zelo kakovostna izdelava, tiho delovanje, visoka zmogljivost. Idealno za delavnice, proizvodnjo, ličarske delavnice in povsod tam, kjer je potrebna stalna in stabilna dobava stisnjenega zraka. ⸻ TEHNIČNI PODATKI: Giedpfoy A Tp Rox Afwjt • Proizvajalec: Blitz • Model: Monsun Pro Eco 15 • Moč motorja: 15 kW • Delovni tlak: 10 bar • Zmogljivost: pribl. 2,0 m3/min • Obrati: 1500 / 3000 obr/min • Leto izdelave: 2011 • Napajanje: 400V (3 faze) ⸻ DELOVNE URE: • pribl. 17.954 h ⸻ OPREMA: - kontrolna plošča - zvočno izolirano ohišje - inštalacija pripravljena za priklop - kompaktna zasnova ⸻ TEHNIČNO STANJE: • kompresor deluje • običajni znaki uporabe • deluje brezhibno ⸻ UPORABA: • avtoservisi • industrija • proizvodnja • ličarske delavnice • servisna podjetja

Stanje: novo, Leto izdelave: 2026, Production time approx. +/- 4 months. Giedped Hkqhjfx Afwjt The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Gijdpsv Sqrpefx Afwet Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet Gisdpfxod Dgw Us Afwet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: MAX Photonics, laserska moč: 3.000 W, valovna dolžina laserja: 1.070 nm, najv. debelina jeklene pločevine: 22 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, maks. debelina aluminijaste pločevine: 10 mm, potovalna razdalja osi X: 3.050 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 120 mm, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 3.500 kg, širina odprtine vrat: 3.000 mm, višina odprtine vrat: 600 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, kabina, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, new laser cutting machine with 3kW fiber laser Our goal is to offer highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included as well as first-class service. - Includes 2D bevel cut function for weld seam preparation or production of countersunk holes (see picture) Please also note our attractive leasing/ hire purchase offers. - Machine without automatic shuttle table! Loading is carried out from the long side of the machine - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 4 x 4.5 meters installation footprint - 3kW laser source by MaxPhotonics (G5/German version) - Laser generator with socket efficiency better than 30% - Suitable for aluminum - Top quality—book a viewing now! Cuts steel sheet up to 22mm (max) Cuts stainless steel sheet up to 12mm (max) Cuts aluminum sheet up to 10mm (max) Cuts brass sheet up to 8mm (max) - Travel range 1500 x 3000mm (for large formats) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head Giedpfx Aoyacqwefwet - Large laser safety windows for monitoring cutting operations - Comprehensive cutting parameter file - Includes nesting module - Very easy to operate - Powerful laser chiller - Machine control in German - German service and spare parts support - Powerful laser chiller - Filter extraction system optional (5.5kW with frequency converter for quiet operation) Leasing or hire purchase available via our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Need different laser power, table form, or table size? No problem. I am happy to provide a suitable offer. For example, 2kW machine from 29,990 Euros Not sure which laser power is right for your application? Of course, I will carry out cutting trials based on your requirements. Many things are possible here.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrtljajska hitrost (min.): 2.840 obr/min, volumenski pretok: 3.240 m³/h, stiskanje: 10.000 Pa, moč: 18 kW (24,47 KM), High-pressure radial fan, dust extraction fan, pressure fan, vacuum fan, radial fan, high-pressure fan Spellna VRU 15-125-30H3 Condition: Used Impeller: Forward-curved steel, direct drive, 700 mm Drive motor: 18 kW p1: 1.2 kg/m³ Pressure: 7,500–9,000 Pa Speed: 2,950 rpm Airflow: 3,240 m³/h Volume output: 0.9 m³/s Gedoticdlopfx Afwoit Pressure point: 100 mbar Inlet connection: Ø 300 mm Outlet connection: Ø 200 mm Dimensions: 1,400 x 1,400 x 960 mm Weight: 350

Stanje: rabljeno, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential buildings, small commercial facilities, or agricultural applications. It is suitable for use with wood chips and pellets, offers modular output, and fully automatic operation in a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feed, and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Godpfowahhvsx Afwoit ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories directly from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with around 50–60 units constantly available from stock. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed screws • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and components: We also offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – suitable from private to industrial scale. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: You can find most of our current offers on our website: topheatingsystems.com In addition, we have more units available which have not yet been listed online. 📅 Inspection: Viewing at our warehouse is possible by prior appointment. If you are interested, please feel free to contact us – we are happy to help you find the right solution.

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Gisdpfod N Dn Dsx Afwjt Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! Gsdsd Tiu Eepfx Afwjit We have 4 units in stock!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 30 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina aluminijaste pločevine: 50 mm, The Durma HD-F 3015 Fiber Laser Cutting System with 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine designed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability, and outstanding customer service. Features: 30 kW / 80 mm mild steel, 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal length F300 mm Conveyor system Technical Data: Power output: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis travel: 160 mm Maximum simultaneous speed: 170 m/min Maximum simultaneous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeatability: +/- 0.02 mm Product Description of the Durma HD-F 3015 30 kW: Gsdeq Nl T Tepfx Afwjit Powerful and Efficient: Equipped with a 30 kW fiber laser, the Durma HD-F 3015 delivers outstanding cutting performance and precision for a variety of materials, including steel, aluminum, and copper. Generous Working Area: With a working area of 3,000 x 1,500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC Control: The user-friendly and precise control system allows for easy operation and optimizes cutting paths to minimize material waste. Automatic Nozzle Changer System: This feature increases productivity and reduces downtime during nozzle changes. Energy Efficient: The laser boasts high energy efficiency, resulting in lower operating costs. Robust Construction: The machine is designed for durability and reliability, even under demanding working conditions. Safety: Comprehensive safety features ensure secure operation. Versatility: Compatible with various laser cutting software solutions, making it suitable for multiple industries. Durma Maschinen GmbH – Your Reliable Partner: As the manufacturer of the Durma HD-F 3015, we at Durma Maschinen GmbH are proud of our rapid and efficient service as well as our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting requirements. Interested in the Durma HD-F 3015 30 kW? Contact us for a non-binding consultation or a customized offer. At Durma Maschinen GmbH, we are happy to assist you with any questions and to find the best solution for your needs. We look forward to your inquiry!

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: nepreverjeno, skupna masa: 0 kg, Müteck lesni drobilec MRZ1530 z motorjem 55 kW. Giedpfx Afjyt Rrijwst Novo, neuporabljeno Prodaja se samo drobilec.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Giedpfjdwktkox Afwjt Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: Gisdpfx Afox Af Rdowjt - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: novo, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 mm Maximum loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 3 kW Max. material thickness St 37-42: 16 mm Max. for aluminum: approx. 5 mm Max. for stainless steel: approx. 5 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency, upper-class standard laser cutter. Capable of supporting up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for manufacturing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machinery and equipment. This is an ideal cutting machine for those looking to outsource production. It allows easy blowing, cutting, pausing, calibration simulation, etc. via wireless remote control. Standard nesting software quickly prepares parts for cutting without operator intervention and includes a flycut function. Thanks to the dual exchange table, cutting can continue without waiting times. All our machines are manufactured to European standards and come with a CE certificate. FLC series machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and auto-view functions that detect obstacles and move automatically. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made of welded aluminum alloy panels in a single-piece construction. This ensures rigidity, prevents deformation from impacts and loads, and maintains shape. Their weight is three times less than comparable steel bridges, resulting in higher speeds and accelerations with less motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Flycutting capability - Nozzle and lens starter kit - Scrap drawers - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote enquiry Gsdpsrh Rpfsfx Afwoit - Automatic lubrication system - Dual camera system Laser type: Closed structure CNC unit: Cyp Cut Autofocus: Yes Working area: 1500 x 3000 mm Repeatable positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load capacity (per table): 1,250 kg Laser source: 2,000 W (Han’s resonator) Table changeover time: 15 s Laser cutting head: Raycus, autofocus Power supply: 380 V, 50Hz (three-phase) Supported graphic formats: dwg / dxf / stp Chiller: Available Average machine dimensions: 2,200 x 8,100 x 2,560 mm

Stanje: novo, Laser power: 4 Working area: 1500 x 3000 mm Load capacity: 1200 kg X-axis travel: 1520 mm y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (L x W x H): 10,000 x 400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with upper-class standards. With support for laser power up to 30,000 W, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. This is an ideal cutting machine for everyone looking to outsource cutting operations. The wireless remote control allows simple blowing, cutting, pausing, calibration simulation, and more. The standard nesting software enables parts to be nested for cutting quickly and without operator intervention. Flycut cutting functionality is also included. As a double shuttle table system, operation can continue without downtime between sheets. All our machines are manufactured to European standards and come with CE certification. Our FLC model machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from a single-piece welded aluminum alloy plate construction. The one-piece design ensures bridge stiffness and prevents deformation when subject to impacts, overlaps, or loads. In addition, due to their structure being three times lighter than steel profile bridges, high speeds and acceleration are achieved with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic autofocus head - Nesting software - 19" CNC touch control - Fly cutting functionality - Starter kit with nozzles and lenses - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote diagnostics - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area 1500 x 3000 mm Load capacity 1200 kg XY-axis travel 1520 x 3030 mm Z-axis travel 300 mm XYZ-axis guide 4-point ball cage XY-axis drive system Rack and pinion Z-axis drive system Ball screw XY-axis speed 100 m/min Z-axis speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table change time 10 sec Laser source Raycus / Hans / JPT Laser source output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Laser cutting head Raytools / BOCI / WSX Supported gases Air/Oxygen/Nitrogen Cooling type Water cooled Godpfx Ajruwazefwjit Machine weight 12,000 kg Machine di...

Stanje: novo, Laser power: 2Working area: 1500 x 3000 mmLoad capacity: 1250 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 13000 x 4400 x 2350 mmWeight approx.: 12,500 kg The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting machine with high efficiency and premium class standards. It can accommodate a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and plants. It is the ideal cutting machine for anyone looking to outsource cutting tasks. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, etc. The standard nesting software quickly prepares parts for cutting without operator intervention. It also features a flycut cutting function. Thanks to the dual exchange table, cutting can continue without downtime. All our machines are manufactured to European standards, and we hold a CE certificate. Our FLC-type machines are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head is equipped with autofocus, an active anti-collision function, and an auto-view feature that detects obstacles and moves automatically. Cutting heads are fitted with automatic cooling. All bridges used in our machines are a single piece, made from welded aluminum alloy sheets. This single-piece construction ensures bridge rigidity and prevents deformation during impacts, overlaps, or loads. Additionally, thanks to their structure being three times lighter than steel profile bridges, we can achieve high speeds and accelerations with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote inquiry - Automatic lubrication system - Dual camera Giedpfx Aferuwapewst SPECIFICATIONS: Working area: 1500 x 3000 mm Load capacity: 1200 kg XY travel: 1520 x 3030 mm Z-axis travel: 300 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table changeover time: 10 sec Laser source: Raycus / Hans / JPT Output power of laser source: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water chiller

Stanje: novo, Laser power: 3 kW Working area: 1500 x 3000 mm Loading capacity: 1200 kg X-axis travel: 1520 mm Y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeat accuracy: 0.03 mm Dimensions (LxWxH): 10,000 x 400 x 2120 mm The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This laser cutting system offers high efficiency and complies with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for anyone looking to outsource their cutting operations. Wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more. The machine includes standard nesting software that quickly arranges parts for cutting with minimal operator input and features flycut capability. With a double shuttle table design, cutting can continue without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC series machines are equipped with nozzle cleaning and a dual camera system. Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active anti-collision, and an auto-view function for obstacle recognition and automated adjustment. Cutting heads are equipped with automatic cooling. All machine bridges are constructed as a single-piece welded aluminum alloy for maximum rigidity and lightweight design. This reduces the risk of deformation due to shocks or loads and allows for higher speeds and accelerations with lower motor power compared to steel bridges. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch CNC touch controller - Flycut functionality - Nozzle and lens starter kit Giedpfx Aoruwawsfwst - Part debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site operator training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 1500 x 3000 mm Loading capacity: 1200 kg XY axis travel: 1520 x 3030 mm Z axis travel: 300 mm XYZ axis guide: 4-point ball cage XY axis drive system: Rack & pinion Z axis drive system: Ball screw XY axis speed: 100 m/min Z axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water-cooled Machine weight: 12,000 kg

Stanje: novo, Laser power: 12 kWWorking area: 1500 x 3000 mmLoad capacity: 1200 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 10,000 x 400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-efficient fiber laser cutting machine. It is a laser cutting machine offering high efficiency and features found in the premium segment. The machine can handle laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting solution for anyone looking to outsource cutting jobs. The wireless remote control allows for straightforward blowing, cutting, pausing, calibration simulation, and more. Standard nesting software enables rapid and operator-free preparation of parts for cutting. Additionally, the machine supports fly-cut functionality. Thanks to the dual shuttle table, cutting can continue without downtime. All of our machines are manufactured to European standards and come with CE certification. Our FLC models feature automatic nozzle cleaning and a dual-camera system. Available cutting areas are 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser heads are equipped with autofocus and active anti-collision features, as well as an auto-view system that detects obstacles and moves automatically. Cutting heads also have automatic cooling. The bridges used in all our machines are made from a single-piece, welded aluminum alloy plate structure. Their one-piece construction guarantees rigidity and prevents deformation under impact, overlap, or load. Moreover, thanks to their design, which is three times lighter than steel bridge profiles, they achieve high speeds and accelerations with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19" CNC touchscreen control - Fly cutting Godpfx Aforuwa Tjwjit - Nozzle and lens starter kit - Scrap drawers - Automatic pallet changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS ValueWorking area1500 x 3000 mmLoad capacity1200 kgXY-axis travel1520 x 3030 mmZ-axis travel300 mmXYZ axis guide4-point ball linear guidesXY axis drive systemRack and pinionZ axis drive systemBallscrewXY axis speed100 m/minZ axis speed30 m/minXY positioning accuracy0.05 mmXY repeatability0.03 mmPallet change time10 sLaser sourceRaycus / Hans / JPTLaser source output2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control systemFscutLaser cutting headRaytools / BOCI / WSXSupported gasesAir / Oxygen / NitrogenCooling typeWater coolingMachine weight12,000 kg

Stanje: novo, Working width: 1,500 mm Working length: 3,000 mm Gedjtqy Tfspfx Afwsit Accuracy +/-: 0.05 mm Max. loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 2 kW Max. material thickness St 37-42: 14 mm Max. material thickness St 37-42 (other spec): 4 mm Max. for stainless steel: approx. 5 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting machine with high efficiency and premium-class standards. It can handle a laser power of up to 30,000 W and is therefore a very good choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing components in the production of agricultural machines, textile machinery, food machinery, construction equipment, elevators, and other large machines and systems. It is an ideal cutting machine for anyone looking to outsource their cutting work. Convenient features like wireless remote control allow for easy blowing, cutting, pausing, calibration simulation, etc. A standard nesting software program quickly prepares parts for cutting without operator intervention. It also features a flycut cutting function. As it is equipped with a double shuttle table, you can continue cutting without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC-type machines feature automatic nozzle cleaning and a dual-camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head includes autofocus, active anti-collision function, and auto-view function that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges used on all of our machines are a single-piece welded structure made of aluminum alloy sheets. This one-piece construction ensures the rigidity of the bridge and prevents deformation from impacts, overlaps, or loading. Additionally, compared to steel profile bridges, the three-times lighter construction enables higher speeds and accelerations with lower motor power. Included accessories: - Water chiller - Switch cabinet cooling - Automatic focus head - Nesting software - Touch 19-inch CNC controller - Flying cutting - Nozzles and lenses incl. starter kit - Parts and slag drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote inquiry - Automatic lubrication system - Dual camera system Laser type: Enclosed design CNC unit: Cyp Cut Autofocus: Yes Working area: 1,500 x 3,000 mm Repeat positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load capacity (per table): 1,250 kg Resonator: Han's source Table change time: 15 s Laser cutting head: Raycus autofocus Power supply: 380 V 50 Hz (three phase) Graphic formats: dwg / dxf / stp Chiller: Available Average machine dimensions: 2,200 x 8,100 x 2,560 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Maxphotonics, skupna dolžina: 5.150 mm, skupna širina: 2.870 mm, skupna višina: 2.450 mm, Oprema: CE označba, centralizirani mazalni sistem, hladilna enota, Why keep struggling with the cut quality of fine-beam plasma systems? Why continue wasting valuable space in your workshop with a shuttle table? Why keep spending thousands of euros every year on expensive plasma consumables? Beyond the clear advantages of modern fiber laser technology in terms of precision and virtually rework-free laser cut quality, laser cutting is also surprisingly cost-effective. At the same time, laser cutting is significantly easier to operate than plasma cutting systems. Best of all, at Schmidt & Partners Cutting, we support your system from our two service centers throughout its entire lifespan. As a reliable partner in the world of cutting technology, we offer perfect advice, installation, training, maintenance, and repair. We support you with our expertise and experience, including with cutting parameters for special materials. We are also happy to assist you with all aspects of work safety regarding lasers, ensuring a smooth implementation of this technology into your company. kaitec FIBER Eco 1530 Cutting area: 1,500 x 3,000 mm Max. sheet thickness: 25 mm (depending on laser source power) Laser systems: 2kW / 3kW / 4kW / 6kW Maxphotonics series (in partnership with AK Industry GmbH, the certified service partner in Germany) CE certified, risk-assessed Giedpfox Ngp Dox Afwet Machine price depending on configuration, tailored to your requirements Starting from €96,850 (plus transport, installation & training) Don’t have a suitable filtration system yet? We’ll also be happy to configure the right extraction unit to suit your needs. We look forward to hearing from you!

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3800 x 2300 x 2100 mm Weight: 1900 kg Total power requirement: 13 kW CNC machining center ROUTERMAX 1530 ECO - Working area X-axis: 1500 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle: water-cooled, 4.5 kW each, ER 25, with CHILLER CW 3000 cooling unit - Spindle speed: steplessly adjustable up to 22,000 rpm - Drive system (X & Y axes): rack and pinion - Drive system (Z axis): ball screw - Drive motors: stepper motors - Max. traverse speed: 22 m/min - Max. working speed: 15 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 4 zones and T-slots - Vacuum pump: 5.5 kW, dry-running, air-cooled - Tool length sensor - Controller: DSP type NK 105 (MACH3 OPTION) - Interface: USB Gedpfsv A Ha Rsx Afwsit - CAD/CAM software: Vectric Cut2D PRO (including nesting) - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2300 mm - Length: 3800 mm - Weight: 1900 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4000 x 2300 x 2100 mm Weight: 2300 kg Total power requirement: 21 kW Giodjv A E Tvjpfx Afwst CNC machining center ROUTERMAX ATC 1530 ECO - Working area X-axis: 1500 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed, infinitely variable: 24,000 rpm - Tool changer, 12-position, side-mounted - Drive system (X & Y axes): Rack and pinion drive - Drive system (Z axis): Ball screw - Drive motors: AC servo motors, Leadshine 850 W - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 6 zones and T-slots - Vacuum pump 7.5 kW, air-cooled - Workpiece positioning: Pneumatically retractable stops, 2 each on X and Y axes - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (nesting included) - Control: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2300 mm - Length: 4000 mm - Weight: 2300 kg

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Giodsi Ar Ruopfx Afwot Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Maximum acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 7000 x 2300 x 2100 mm Weight: 3200 kg Total Power Requirement: 28 kW CNC Machining Center ROUTERMAX ATC 1530 ECO DWT - X-Axis Working Area: 1500 mm - Y-Axis Working Area: 3000 mm x 2 - Z-Axis Working Area: 300 mm - Double Work Table: 1500 x 3000 mm (pendulum operation) - Milling Spindle, air-cooled, 9.5 kW, ISO 30 - Spindle Speed, infinitely variable: 24,000 rpm - Tool Changer: 12-position, traveling type - Drive System (X & Y Axes): rack and pinion Giedpfxsv A E T As Afwjt - Drive System (Z Axis): ball screw - Travel Motors: Leadshine AC servo motors, 850 W - Max. Traversing Speed: 45 m/min - Max. Working Speed: 20 m/min - Working Accuracy: 0.05 mm - Vacuum matrix table with 6 zones and T-slots - 2 x vacuum pumps, 7.5 kW / 250 m³ each, air-cooled - Workpiece positioning: pneumatically retractable stops, 2 on X and 3 on Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (including nesting module) - Controller: DSP NK105 G3 - Interface: USB - Power connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Overall width: 2300 mm - Overall length: 7000 mm - Weight: 3200 kg