Lemken Korund 6000 Sy nakup rabljenega (3.799)

Stanje: rabljeno, Leto izdelave: 2017, Delovna širina 6 m Število nosilcev 5 0 Število zložitev 2 0 Število valjev 2 kos. Kombinacija za pripravo setvene postelje Lemken 212924 Lemken Korund 8/600, Hsdpfxeyv Iwcj Alfefg "Gammazinken", 2-krat zobata drobilna letva, Tehnični podatki so podatki proizvajalca oz. uporabnika, zato zanje ne jamčimo. Pridržujemo si pravico do predčasne prodaje; veljajo izključno naši poslovni pogoji. O nas - več kot 400 lastnih strojev na zalogi - več kot 15.000 m² skladiščnih površin, žerjavna kapaciteta 70 t - več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaš obrat, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi po predhodnem dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: rabljeno, Leto izdelave: 2022, Goosefoot share with overload protection / Flat bar crumbler 2x D270 / Crosskill roller D400 with drawbar / one set of carriers for track looseners / two cutting & levelling tools / Transport chassis 400/60 – 15.5 / Lower link attachment Cat. 3 / Front and rear lighting / Appraisal Hfodpfx Aorxutkslfeg

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Hfjdpeng Ax Sefx Alfeg Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 750 Ah, napetost baterije: 80 V, skupna višina: 627 mm, skupna dolžina: 1.026 mm, skupna širina: 996 mm, Tested forklift battery for your forklift – 80V 6PZS 750Ah – DIN A + 1 year warranty + Incl. aquamatic watering system + Incl. end cell connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Hedpsy Rnp Ijfx Alfsfg Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Suitable for the following models, among others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available on request. Transport possible.

Stanje: novo, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 sistem za merjenje kota, serijska številka po fotografiji, nerabljen v odprti originalni embalaži, 100% delujoč, obseg dobave po slikah. Hfedpfx Asi Ea Uyelfeg

Stanje: novo, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 sistem za merjenje kota, serijska številka po fotografiji, nerabljen v odprti originalni embalaži, 100 % delujoč, obseg dobave po fotografijah Hfsdpji Ea Uvsfx Alfeg

Stanje: novo, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 sistem za merjenje kotov, serijska številka po fotografiji, nerabljen v odprti originalni embalaži, 100% brezhiben, obseg dobave po fotografijah Hjdpfx Aloi Ea U Dsfsfg

Stanje: dober (rabljeno), Horizon Stitchliner 6000 Šivalni stroj za izdelavo brošur Ta stroj je v zelo dobrem stanju, z malo obratovalnih ur, izdelan leta 2014. Hjdpfx Aloy E Ewfefefg Opis: Stroj se ponaša z robustno, kompaktno in profesionalno zasnovano konstrukcijo. Odlikujejo ga visoka učinkovitost ter kakovost vezave. Največja izhodna zmogljivost je 6.000 ciklov na uro, z možnostjo izsekovanja pa je dosegljivih do 12.000 ciklov na uro. StitchLiner se samodejno nastavlja preko upravljalne plošče na dotik. Stroj omogoča šivanje brošur do 200 strani pri papirju s težo približno 60 g/m². Oprema stroja: – 2 kolacijski stolpi Horizon VAC-80 Sa + Sm – Horzion SPF-30S šivalni stroj (sedelni šivalnik) – Horizon ACF-30S zložljivi (gibalni) modul – Horizon HTS-30S trirezilni rezalnik – Dostavni trak, sistem za odvod odpadkov, 2 šivalni glavi Hohner, kompresorji, dodatne komponente, pribor, dokumentacija. Tehnične specifikacije: Maksimalen format: 350 x 500 mm Minimalen format: 140 x 200 mm Teža papirja: 53 do 210 g/m² Največja debelina brošure: 5,2 mm plano Razmak sponk: 60 do 150 mm Debelina reza pri trirezilnem rezalniku: 2 do 25 mm Proizvodna zmogljivost: do 6.000 brošur/uro Debelina žice: 0,5–0,7 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potreba po zraku: 200 m³/h, skupna širina: 2.400 mm, skupna višina: 2.350 mm, skupna dolžina: 3.500 mm, Patronski filtrirni sistem MBX-6000 z 8 patronami. Za filtracijo vseh vrst prahu, npr. lesa, peska itd. Učinkovit pretok zraka 6000 m³/h, električni motor 9 kW, 3x400 V, 50 Hz, filtrirna površina: 104 m² (8x13 m²), filtrski razred: M, po DIN 60335, pnevmatsko čiščenje filtra, čas izpihovanja 10 min. Posoda za prah: 4 kos, po 30 litrov. Peskalna posoda Clemco (rabljena) 100 litrov. Vijačni kompresor Renner RSK 1-30, letnik 2020, 1178 delovnih ur. Hodpfxjx Ai Hpo Alfjfg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic data Manufacturer: DEMAG Model: System 1500/1500-16000 Hedsyugalopfx Alfofg Year of manufacture: 2008 Clamping unit Clamping force: 15,000 kN Platens dimensions (horizontal × vertical): 2150 × 1880 mm Tie bar spacing (horizontal × vertical): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and hydraulic equipment Pump motor rating: 165 kW Heater power: 97 kW Machine dimensions and weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board (cable plate) 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod with seals 2017 – replacement of oil cooler circulation pump 2017 – TeachBox (robot) replacement 2018 – replacement of P1 + P3 pumps (at 65,800 h) 2018 – hydraulic oil change Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to match the machine’s actual demand during the production cycle. As a result, electrical energy is consumed only when it is actually needed. Key benefits: - Reduction of electricity consumption by up to 30% - Servo technology for hydraulic pump drive - World-class, proven technology used in plastics processing industry - Reduced energy losses during machine idle - Lower heating of hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significantly reduced machine operating costs while maintaining full production capabilities.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8673 0023, vpenjalna sila: 15.000 kN, premer vijaka: 145 mm, tlak vbrizgavanja: 1.454 letvica, širina plošče: 1.880 mm, višina plošče: 2.150 mm, Regularly serviced machine – see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H × V): 2,150 mm × 1,880 mm Clear distance between tie-bars (H × V): 1,500 mm × 1,250 mm Min./Max. mould height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control: DIAS Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L × W × H): 14.4 m × 3.4 m × 2.9 m Electrical connection Main supply: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with seals 2017: Circulation pump for oil cooler replaced 2017: Teachbox replaced (robot) 2018: Pumps P1 + P3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced Hjdjwp Idcspfx Alfofg 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP installed EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 15.000 kN, premer vijaka: 145 mm, tlak vbrizgavanja: 1.454 letvica, odmični hod: 2.900 mm, višina orodja: 1.400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Hfedpexup T Hofx Alfsg Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mould height: 700 mm Max. mould height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & Hydraulic Equipment Rated pump motor power: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of construction: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and tube 2015: New IBED 2015: New wiring plate 2017: New motor and 2nd pump 2017: New injection side BS cylinder piston with seals 2017: Replacement of recirculation pump for oil cooler 2017: Replacement of teach pendant (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Hydraulic oil changed

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT6084-8AF71-4EG2 synchronous servo motor SN YFS930560001004, used, minor signs of wear, 100% functional, scope of delivery as per photos Hsdpfx Aljvl Uz Iofjfg

Stanje: rabljeno, Tube bar roller, stone protection, wing shares / Hfedjtudgfepfx Alfeg

Stanje: rabljeno, Leto izdelave: 2023, Warning panels with lighting chassis / Hfsdpfeuhpf Ijx Alfsg

Stanje: rabljeno, Leto izdelave: 2009,

Stanje: rabljeno, Leto izdelave: 2014, Lighting/warning panels, / straw inserter / _____ / strip body, / packer system Fixpack with integrated tube bar roller, / / hydraulic stone protection, / straw guide plates, / notched disc coulter, / components 50%, / 340/55-16 support/transport wheel / steps Hodpfxjqrryce Alfofg

Stanje: rabljeno, Ta ponudba se nanaša na kromatografski sistem Waters Fraction Collector III. Hfsdpfx Aloxtbcqjfeg Naprava je v popolnoma delujočem stanju in je takoj pripravljena za uporabo. Waters Fraction Collector III je zasnovan za prilagodljivo zbiranje frakcij tako v HPLC kot tudi LC-MS aplikacijah. Podpira visoke pretoke, do približno 300 mL/min, ter omogoča uporabo različnih posod in nosilcev za zbiranje vzorcev. Primerni so: standardna stojala za epruvete (13–18 mm zunanji premer), eppendorf cevi, viale za scintilacijo, mikroplošče (4 × 96/384) ter stojala za pripravljalne lijake (4 × 32 pozicij). Način zbiranja frakcij je mogoče nastaviti po času, volumnu, številu kapljic, signalu (npr. prag detektorja), načinu po vrhovih (čas zaključka vrha, čas zahteve, do 10 od 99 vrhov) in načinu po časovnem oknu (začetni/končni čas) itd. Sistem je mogoče upravljati lokalno (prek tipkovnice in LCD prikazovalnika) ali na daljavo preko programske opreme (npr. Empower 3, MassLynx), kar omogoča integracijo v avtomatizirane postopke čiščenja in ločevanja. Kratka časovna zamuda šobe (0,1 s med središči cevi) zmanjšuje mrtvi čas med posameznimi frakcijami. Možnost uporabe preusmerjevalnega ventila: omogoča usmerjanje neželene frakcije (npr. praznine kolone, neželenih vrhov, odvečne topilne faze) v odtok, kar izboljšuje učinkovitost zbiranja frakcij.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 13.817 h, model krmilnika: Siemens Sinumerik 840 D, laserska moč: 3.200 W, prebijalna sila: 22 t, potovalna razdalja osi X: 2.585 mm, pomik osi Y: 1.280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Hfsdpfx Aey Iz H Ijlfeg Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser ON hours: 71,637 h Operating hours: 80,188 h EQUIPMENT Sturdy C-frame Coordinate guide with integrated linear magazine Maintenance-free three-phase servo motors Programmable hold-down device for repositioning Sensor-monitored part slides 500x500 mm for punching and laser station Ejector cylinder at laser slide Programmable cutting gas pressure adjustment Laser cutting head: 5'' lens, quick-change device, height control Multi-beam light barriers Quick-stop hydraulic system Extraction unit Compact dust collector Protective device against stray radiation at cutting head Brush table Marking function / fast beading Softpunch Blow-out device for small parts Repositioning cylinder Warpage detection Chip conveyor

Stanje: novo, Dolžina valjčnega transporterja: 6000 mm Širina valjčnega transporterja: 550 mm Značilnosti: Hfedpfx Aljy H N I Rsfjg - Uporabna širina valjev: 540 mm - Ročni naslon - Odcitavanje z lupo - Fiksacija naslona z zatezno ročico - Kroglična ležajna vodila za enostavno nastavitev - Robustna in stabilna izvedba, primerna za polni in profilni material - Merilna dolžina je dolžina transporterja minus 400 mm Na primer, primerno za: - MEP SHARK 382-1 SXI EVO - MEP SHARK 512 SXI EVO

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, laserska moč: 2.700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control: Rexroth IndraMotion MTX-based Laser power: 2700 watts Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guidance system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable holddown - Foot switch for clamp closure - Alignment pin (right inside) - Ball tables - 2 part flaps 500 x 500 mm incl. sensor for part ejection - Two finished part containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - Laser TruFlow 2000 with LensLine and optimized standby - High-frequency excitation - Cooling unit - Laser control - Closed beam guidance - Fine filtration compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable holddown with manually adjustable force - Stroke counter for punches and threads - Spray lubrication for punches Hsdpfxey Saqmo Alfjfg - Punch slug extraction - Fill level calculation in punching console - Thread forming and tool lubrication level monitoring Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Auto shut-off incl. wake-up mode - Program management - Production planning Data Transmission - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light barriers - Monitoring system, including for gas pressure, temperature, cooling water - Emergency stop - Protection against stray radiation - Compact dedusting system + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology: roll knurling, roll deburring, roll shearing, roll stepping, roll beading, roll cutting + Spray lubrication for die + Blow-off device for small parts + 1x additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-dampened installation + Repositioning cylinder + Warping detection + Parts conveyor for punching area + Parts conveyor for laser area + GripMaster (2500x1250) + Scissor lift table + Skeleton grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, laserska moč: 3.000 W, X Working Area max.: 2500 mm Y Working Area max.: 1250 mm Control: IndraMotion MTX Laser Power: 3000 Watt Standard Equipment: Machine - Coordinate guides for highly precise machining - Sturdy, easily accessible C-frame - Linear tool magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning unit with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF Laser - Solid-state laser TruDisk 3001 with 1 fiber outlet - Excitation via pump diodes - Fiber cable according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting Head - Solid-state laser compact cutting unit - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / repositioning) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level on the punching console - Level monitoring for thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management - Production planning - Integrated technology data - Remote teleservice via Internet - Programmable cutting gas pressure - Automatic shut-off with wake-up mode Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology - SoftPunch function - StripLine - Lowerable die - Spray lubrication die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warp detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction device - Vacuum sensors for each suction cup - Double sheet detector for double sheet check - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing for machine - Simultaneous loading and unloading during main operation - Peeling system incl. positioning aid for medium format (2500x1250) - First standard auxiliary suction package - Second standard auxiliary suction package - Unloading monitoring for laser parts GripMaster Hsdpjy Samuefx Alfofg - Parts conveyor belt, punching station - Parts conveyor belt, laser station ToolMaster with 70 stations (punching mode only) - Simultaneous tool change during main operation (ToolMaster)

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: IntNr231573, A vendre, tour CNC MORI SEIKI NL 2500/1250 d'occasion, année de fabrication 2006, équipé d'une commande MORI SEIKI MSX 850III / MAPPS III ainsi que d'un magasin d'alimentation IRCO SIMAG pour alimentation automatique des barres. Caractéristiques techniques Commande : MORI SEIKI MSX 850III / MAPPS III Origine : Japon Conception : Tour CNC à banc incliné Hfodey N Tqbjpfx Alfjg Distance entre pointes : 1.250 mm Longueur de tournage maxi : 1.298 mm Diamètre de tournage maxi : 356 mm Diamètre de tournage standard : 275 mm Diamètre de passage au-dessus du banc : 923 mm Axe X : 260 mm Axe Z : 1.345 mm Vitesse de broche : jusqu'à 4.000 tr/min Alésage de broche : env. 80 mm Tourelle : 12 positions Nombre de tourelles : 1 Convoyeur à copeaux Outils entraînés Axe C Axe Y Poids de la machine : 7.600 kg Dimensions de la machine : 5.000 x 2.300 x 2.400 mm La machine peut être vue en fonctionnement sur rendez-vous. Sous réserve de modifications, d'erreurs dans les données techniques et les indications, ainsi que de vente intermédiaire.

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: IntNr231574, Machine Specifications Control system: MORI SEIKI MSX-850 Design: Slant-bed turning center Configuration: SY with Y-axis Turret: 12-station with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Hsdjy N Tpkopfx Alfsfg Max. turning length: 705 mm Travel Ranges X-axis travel: 260 mm Y-axis travel: ±50 mm / total approx. 100 mm Z-axis travel: approx. 795 mm Rapid traverse (X/Y/Z): 30 m/min Counter Spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and information are subject to change and error. Subject to prior sale.

Stanje: dober (rabljeno), Leto izdelave: 2008, Upogibni stroj TruBend 5085 Hfedpoy Shc Djfx Alfeg