Stroj za brizganje

DEMAG System 1500/1500-16000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping unit Clamping force: 15,000 kN Platens dimensions (horizontal × vertical): 2150 × 1880 mm Tie bar spacing (horizontal × vertical): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and hydraulic equipment Pump motor rating: 165 kW Heater power: 97 kW Machine dimensions and weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Kdedpfx Ajyugalogfst Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board (cable plate) 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod with seals 2017 – replacement of oil cooler circulation pump 2017 – TeachBox (robot) replacement 2018 – replacement of P1 + P3 pumps (at 65,800 h) 2018 – hydraulic oil change Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to match the machine’s actual demand during the production cycle. As a result, electrical energy is consumed only when it is actually needed. Key benefits: - Reduction of electricity consumption by up to 30% - Servo technology for hydraulic pump drive - World-class, proven technology used in plastics processing industry - Reduced energy losses during machine idle - Lower heating of hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significantly reduced machine operating costs while maintaining full production capabilities.

Stanje: rabljeno, The SMIPACK FP 560a, with its compact construction, is especially suitable for packaging CDs, DVDs, books, picture frames, or other compact items. Semi-automatic L-sealing machine – SMIPACK FP 560a Year of manufacture: 2014 Sealing frame: 560 x 430 mm Maximum product height: 230 mm Kodexp H Udspfx Agfedt Maximum film width: 600 mm Maximum film roll diameter: 300 mm Film thickness: 10–50 µm Output: up to 600–1200 pcs/hour Machine dimensions: L 2,020 x W 790 x H 1,055 mm Machine weight: 148 kg Power supply: 220–240 V, 50–60 Hz Rated power: 2,500 W Rated current: 12 A Online video inspection available via WhatsApp – MS Zoom – Telegram In stock in Emskirchen/Nuremberg – Available immediately – Can be tested

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8673 0023, vpenjalna sila: 15.000 kN, premer vijaka: 145 mm, tlak vbrizgavanja: 1.454 letvica, širina plošče: 1.880 mm, višina plošče: 2.150 mm, Regularly serviced machine – see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H × V): 2,150 mm × 1,880 mm Clear distance between tie-bars (H × V): 1,500 mm × 1,250 mm Min./Max. mould height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control: DIAS Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L × W × H): 14.4 m × 3.4 m × 2.9 m Electrical connection Main supply: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with seals 2017: Circulation pump for oil cooler replaced 2017: Teachbox replaced (robot) 2018: Pumps P1 + P3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP installed EQUIPMENT Kedpfx Agey T Hy Djfedt - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Stanje: zelo dobro (rabljeno), Drilling depth: 500 mm Spindle speed: 1 Kdsdpfxexx A D Te Agfot O F F E R We can offer you, subject to prior sale and errors excepted, the following from our stock, without obligation: DEGEN Universal Deep Hole Drilling Machine Model: UTB 500-2 Year of manufacture: - _____ Drilling depth: 650 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 25 mm Spindle taper: SK40 Infinitely variable feed: 0–120 mm Rapid traverse: rpm Drilling unit vertically adjustable: 250 mm Table dimensions: 570 x 1000 mm 4 T-slots, 14 mm T-slot spacing: 90 mm Table load capacity: 1000 kg Transverse table travel: 460 mm Table swivels: 360° Weight approx.: 1,600 kg Accessories / Special Equipment: • Compact design on a robust base • Deep hole drilling up to 500 mm length possible—ideal for extended drilling in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • Features an RSF Elektronik digital display, type Z 502, for X and Y axes, with 0.01 mm resolution • A solid solution for workshops requiring deep, straight bore holes—not intended for very large diameters or complex machining tasks • The Degen UTB 500 has been extensively modernised—with Lenze feed drive, overhauled Y-axis, new glass scale encoder, newly mounted spindle, and new gas pressure spring—offering reliable precision and high performance Condition: good to very good – ready for demonstration under power A video of the machine is available here (please click on the link): UTB 500/4 Delivery: ex stock—as inspected Payment: strictly net—on receipt of invoice We look forward to your order. We also have further tool grinding machines in stock—please enquire!

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Ksdpfxsyh I Eme Agfjdt Razdalja med stebri V: 1420 mm Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Leto izdelave: 2025, stanje: novo, Packaging machine (packing, sealing) for packaging uniform products such as stacks of soft textile and paper towels, operated via touchscreen and PLC. Infeed conveyor included, no-product-no-fill function, easy changeover of packaging size. Equipped with SIEMENS PLC, WEINVIEW touchscreen operator panel, OMRON relays and encoder, SCHNEIDER AC switch, PANASONIC servo drive and motor, and DANFOSS frequency converter. Kdsdpfxsv Nmbbo Agfot - Specifications: Bag sizes: L(100-230)xW(100-200)xH(40-100)mm; maximum idle machine cycle rate: 40 cycles/minute; power supply: 380V, 3.6kW; machine dimensions: L3560xW5885xH1925mm; weight: 3300kg. Please note that our new equipment prices are often below common used equipment prices. Feel free to contact us and share your packaging requirements. - Generally, 30-50 different new machines are available from stock for immediate delivery. For custom-built equipment we offer very short delivery times from approx. 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Sušilni sistem – model 1T 184 TPR (z mobilnim transportnim trakom). Ponujamo visokokakovosten sušilni sistem, ki je idealen za sušenje lesnih žagovin, pridelkov, reciklirnih odpadkov in surovin živilske industrije. Sušilni stroj je popolnoma nov, v originalni embalaži. Kodpfxoua D U Is Agfodt

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GN156, lastna masa: 356 kg, največja dovoljena obremenitev: 944 kg, skupna masa: 1.300 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.630 mm, širina tovornega prostora: 1.450 mm, višina nakladalnega prostora: 400 mm, Oprema: nalagalnik, Drop-side boards, railing, and more - Drop-side boards made from galvanized steel sheet, 40 cm high, double-walled - with tension latches - drop-sides fold down and are removable on all sides - plug-in corner posts - quick conversion to a platform trailer - robust and durable hinges Attachment options for tarpaulins and nets - pre-installed attachment buttons for securing tarpaulins and nets Chassis and frame - tow-ball coupling with safety indicator - partially hot-dip galvanized - bolted chassis with V-drawbar - frame with two continuous U-profile longitudinal members and two cross members Loading area and floor - continuous, anti-slip, and waterproof phenolic resin-coated plywood floor - 12 mm thick Lighting equipment - modern multifunction lighting - with reversing light - with rear fog lamp - 13-pin plug Wheels and axles - heavy-duty rubber torsion axle - with auto-reverse function - equipped with spray guards - wheel chocks with holder Lashing and securing options - 6 recessed lashing rings, integrated into the frame on the loading area Documents and freight - Freight costs to us already included Kjdpfx Ajii S U Usgfodt - incl. registration certificate part II - incl. COC document (EC certificate of conformity) - no further unwanted costs - downgrade available for a fee (TÜV fee only) Further offers and information can be found on our homepage. We are not allowed to provide a direct link; please simply search for "Dapper Anhänger" online. Photos may show optional accessories. Subject to errors, changes, and prior sale.

Stanje: novo, Leto izdelave: 2024, The Durma Tube Laser HD-TC 60220 stands for maximum precision and efficiency in tube material processing. With its impressive maximum tube diameter of Ø220 mm and the ability to cut both square profiles up to 160 x 160 mm and rectangular profiles up to 200 x 100 mm, this tube laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the capability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects requiring rapid production while maintaining consistently high quality. The minimum material length for automatic loading is 3000 mm, further enhancing the machine's efficiency and reducing processing time. Max. tube diameter: Ø220 mm Laser power: 3 kW Max. dimensions of square profile: 160 x 160 mm Max. dimensions of rectangular profile: 200 x 100 mm Min. tube diameter: 20 mm (12 mm with manual loading) Max. tube diameter for automatic loading: Ø170 mm Max. profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. material length: 6500 mm Min. material length for automatic loading: 3000 mm Ksdpeq Tpkyjfx Agfsdt Last piece length: 4000 / 6000 mm Discharge length: 150 mm Max. material weight per meter: 52 kg/m Max. material weight (total length): 340 kg Max. loading weight: 3000 kg Profile types: round, square, rectangular, elliptical Open profile types: L, U

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Kdsdpox D Eccsfx Agfst Machine depth: 4308 mm