Kraussmaffei Km-650-3500 C-2 nakup rabljenega (104.225)

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Lodpstunccefx Al Nork Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 100 mm, tlak vbrizgavanja: 1.742 letvica, minimalna višina orodja: 600 mm, odmični hod: 1.150 mm, širina plošče: 1.440 mm, višina plošče: 1.490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mould opening force: 346 kN Sliding plate opening force: 169 kN Lrsdpfowp Si Nox Al Nek Sliding plate closing force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear space between tie-bars: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Rated pump motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight including control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection by Krauss Maffei: 24/03 New (hydraulic) screw drive: 25/01 New check valve: 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising system for thermoplastics with a 100 mm screw diameter, check valve, and open nozzle

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 operating hours in automatic mode. The machine will be delivered fully refurbished. REFURBISHED MACHINE Equipment: - 6 pneumatic cascade valves - 24 hot runner zones - 1 core puller on the fixed platen - 1 core puller on the moving platen - Electric screw drive Lsdpfshy Nnbox Al Nsrk Technical specifications: - CLAMPING FORCE: 6,500 kN - PLATEN SIZE: 1,540 x 1,440 mm - CLEARANCE BETWEEN BARS: 1,110 x 960 mm - MAX. MOULD OPENING STROKE: 1,150 mm - DAYLIGHT OPENING: 1,750 mm - SCREW DIAMETER: 90 mm - MIN. MOULD INSTALLATION HEIGHT: 600 mm - YEAR OF MANUFACTURE: 2004 - SHOT VOLUME: 1,953 cm³ - SHOT WEIGHT: 1,777 g - INJECTION PRESSURE: 1,742 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Lredpfx Alsx Uqa De Nok Poids de dose en polystyrène : 278 g Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 27.000 h, vpenjalna sila: 6.500 kN, Krauss Maffei KM650-3500 C2 injection molding machine for sale. The machine is in excellent condition, having only been used in single-shift operation, exclusively for small batch and sample production. A new hydraulic pump was recently installed (approximately 300 operating hours ago). - 27,000 operating hours Lrsdpfxoyn Sc Ej Al Nsk - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged, in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic barrel - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Inspection under power is possible. Additional accessories such as Motan dryers, chiller units, and much more available on request. The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Lsdsycqc Topfx Al Nork Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Stroke volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing throughput: 83 g/s Nozzle contact force: 173 kN Electrohydraulic Equipment: Rated power of pump motor: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Accessories: Oscillation elements Lrsdpfsv Stbmex Al Njk Additional Equipment: - 1 x air valve - 8-way pneumatic cascade control - Accumulator - 2 x hydraulic core pulls on BWAP - 2 x hydraulic core pulls on FWAP - Robot interface according to EUROMAP 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 77.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 5.000 kN, premer vijaka: 100 mm, Clamping force 5000 kN Lrodpjwgni Hjfx Al Nek Maximum tool opening force 280 kN Moving platen drive force, opening 137 kN Moving platen drive force, closing 136 kN Clamping plate (h x v) 1270 x 1200 mm Clear width (h x v) 900 x 800 mm Mould opening stroke 1170 mm Minimum mould installation height 480 mm Opening width: 1650 mm Ejector stroke 250 mm Ejector force forward/back 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Shot volume 2411 ccm Shot weight (PS) 2194 g Injection flow rate 801 ccm/s Screw speed 189 rpm Plasticising throughput 161 g/s Nozzle contact force 173 kN Electrohydraulic equipment: Rated power of pump motor 90 kW Installed heating capacity 44 kW Temperature control zones, cylinder heating 7 Oil fill 1075 l Dimensions and weights: Space requirement approx. 7.50 x 2.50 x 2.50 m Total weight 27090 kg Max. mould weight 7900 kg Accessories: - Oscillating elements - 2 x 8-circuit water manifold Additional equipment: - 2 x hydraulic core pull on moving platen - 2 x hydraulic core pull on fixed platen - Robot interface as per Euromap 12 - 16 x hot runner control zones - 1 x air valve on moving platen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machinery: From 01.07.2025, used machines can also be depreciated for tax purposes with a special depreciation rate of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster (§ 7 Para. 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-colour, 2-component machine Control: MC6 Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st Injection Unit 750 horizontal Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping Unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Lrsdeyf Uy Uopfx Al Nok Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – full machine card as PDF document attached Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pull 1 x blow-off Water BGS: 6 circuits each, nozzle side and ejector side BluePower technology up to 40% energy savings The machine is very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or delivered to site with freight costs reimbursed. Information about the machines we offer and our company: - We only sell machines acquired from ongoing production from our own stock in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers trading third-party property - All machines offered come from successful businesses where maintenance and care are standard - All offered machines can be inspected at our warehouse

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Lodpfxjw Hwthj Al Nsrk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm Lrsdpfsub S R Hox Al Nsk L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 504212, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, razmak između stupova: 900 mm, tlak vbrizgavanja: 1.742 letvica, vgradna višina: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Max. mould opening distance: 1,170 mm Min. mould installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force reverse: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Lsdpfjw Dy Rwex Al Njrk Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3 phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged by agreement at an additional cost.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle Ljdpfx Ajw U N Ixjl Nerk • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 6,500 kN Maximum mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1,520 x 1,470 mm Clear daylight (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow: 690 cc/s Screw rotation speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Lsdpfjx Hzzcex Al Nerk Rated pump motor power: 90 kW Installed heating capacity: 50 kW Number of temperature control zones for barrel heating: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Vibration dampers - Krauss Maffei robot LR300 X axis: 1,200 mm, servo-driven Y axis: 1,000/1,000 mm, telescopic, servo-driven Z axis: 3,500 mm, servo-driven C axis: 0 - 90° pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 hot runner controllers - 2 x hydraulic core pulls on the moving platen (BWAP) - 2 x hydraulic core pulls on the fixed platen (FWAP)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 130 mm, delovna prostornina: 6.172 cm³, tlak vbrizgavanja: 1,296 letvica, širina plošče: 1.700 mm, višina plošče: 1.704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Max. tool opening force: 346 kN Force to open moving platen: 169 kN Force to close moving platen: 144 kN Clamping platen (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Mould opening stroke: 1,150 mm Minimum mould installation height: 600 mm Maximum daylight: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow: 1,540 ccm/s Screw speed: 138 rpm Plasticising rate: 238 g/s Nozzle contact force: 246 kN Lrodpfx Alex Dbtwj Njk Electrohydraulic Equipment Rated output of pump motor: 132 kW Installed heating capacity: 70 kW Temperature control zones (barrel): 7 MACHINE DETAILS Required floor space approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Vibration-damping elements - 1 x air valve - 2 x hydraulic core pullers at BFAP - 2 x hydraulic core pullers at FFAP - 8 x hot runner control zones - Robot interface according to Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Ljdpfsy Dqiwox Al Nerk Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Plasticizing volume: 679 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - Touchscreen Additional equipment: Ljdpey Dqiqsfx Al Nork Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system with 10 hot runner zones Injection unit hardened – bimetallic screw Energy-efficient machine – features a system with 3 variable delivery hydraulic pumps Parallel movements Proportional valve on injection unit – precise dosing Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 robot Year of manufacture: 2019 4-axis robot: 3 axes driven by electric servomotors; C axis – pneumatic Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine: Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards. We have been a major dealer in used injection molding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery: As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently available in our tested warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine Number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2x core pulls (movable core, fixed core) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection performance Lrsdexqhuuepfx Al Nek - Fast SK shut-down CX Midrange - Ejection of cooled nozzle plug - Start handling during mold movement - Start-up mode - Cycle time analysis - External USB keyboard - Graphic analysis with maintenance notes - Electronic coding injection unit - Pneumatic valve on BWAP for blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target/actual comparison - PV control - Active back pressure control - Single owner – German origin - Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2,500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening stroke: 820 mm Mold height: min. 330 mm Max. daylight: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrical Equipment Pump: 45 kW Heaters: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software included Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply). The machine is offered function-tested and is in our sole ownership. The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power. For additional information about our machines and company: - We sell only machines purchased from active production that are in our own stock in Hannover. - All offered machines are tested and inspected before dismantling. - We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment. - All machines offered come from successful companies where maintenance and care are self-evident. - All machines offered are available for inspection at our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Here we offer a very well-maintained, regularly serviced injection moulding machine. We are also interested in taking back well-kept machines from model year 2010 and newer as part exchange. Please offer us any surplus machines you may have coming available. Full maintenance by manufacturer up to the present Ledpfxsh Dp R Ee Al Nork Injection moulding machine Krauss Maffei KM65-160 C2 Injection moulding machine: Manufacturer / Type: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Full annual servicing carried out by manufacturer Clamping unit: Clamping force: 650 kN / 65 tons Tie bar spacing: 405 x 405 mm Minimum mould height: 250 mm Max. platen opening: 750 mm Standard platen size: 610 x 610 mm Ejector stroke: 150 mm Core pull: 1 x unit Injection unit: Injection unit size / cylinder diameter: 160 / Cylinder Ø25 mm and cylinder Ø18 mm Max. shot weight (Ø25): 47 g/PS Injection flow rate: 63 cm³/sec Max. specific injection pressure: 2500 bar Handling interface: Euromap 12 Dosing unit interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3,800 mm Width (machine only): 1,050 mm Height: 1,890 mm Oil fill: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown in photos is NOT included in the offer! The machine is available for immediate delivery from our warehouse. Loaded free onto buyer's truck, or delivered free to address against reimbursement of shipping costs. About the machines and our company: - We only sell machines owned by us, acquired from ongoing production, from our Hanover warehouse - All machines offered are checked and tested prior to removal - We do NOT sell insolvency goods – we are NOT a broker trading in third-party assets - All offered machines come from successful companies where regular servicing and maintenance is a matter of course - All offered machines can be viewed at our warehouse

Stanje: dober (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.250 kN, premer vijaka: 45 mm, razmak između stupova: 470 mm, delovna prostornina: 275 cm³, tlak vbrizgavanja: 1.878 letvica, injekcijska masa: 250 g, minimalna višina orodja: 300 mm, Krauss Maffei 125-520 C2 Splošne informacije Model: 125-520 C2 Leto proizvodnje: 2004 Krmiljenje: MC4 Teža stroja: 6000 kg Dimenzije (d × š × v): 4,5 × 1,5 × 2,2 m Zaporni sistem Zapiralna sila: 125 t Sistem zapiranja orodja: 125 / … Dimenzije plošč orodja: 745 × 770 mm Razmak med stebri: 470 × 470 mm Odpiralna pot: 600 mm Maksimalna razdalja med ploščama: 900 mm Višina orodja: 300 mm Lredpfsyxl Dlsx Al Nek Izmetalna sila: 22 kN Hod izmetalca: 150 mm Vbrizgalna enota Vbrizgalna enota: … / 520 Premer polža: 45 mm Razmerje L/D polža: 20 Prostornina vbrizga: 275 ccm Masa vbrizga: 250 g Specifičen pritisk vbrizga: 1878 bar

Stanje: dober (rabljeno), Leto izdelave: 1999, vpenjalna sila: 2.000 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 200-700 C2 Št. stroja: 174406 Mednarodna oznaka velikosti: 700 C2 / 200 Leto izdelave: 1999 Zapiralna sila: 2000 kN Zapiralna sila: 200 t Velikost vbrizgalne enote: 700 Teža stroja: 8800 kg Lsdpfx Asytiqwsl Nork Lokacija: Freiburg

Stanje: dober (rabljeno), Leto izdelave: 2002, vpenjalna sila: 1.100 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 110-390 C2 Št. stroja: 1141268 Št. naročila: 646749/1 Leto izdelave: 2002 Zapiralna sila: 1100 kN Zapiralna sila: 110 t Mednarodna oznaka velikosti: 390 C2 / 110 Velikost vbrizgalne enote: 390 Lrjdpfxeytipas Al Nok Obratovalna napetost: 400 V Faze: 3 Frekvenca: 50 Hz Skupni tok: 164 A Glavno varovalo: 200 A Tok motorja: 37 A Teža stroja: 5800 kg Lokacija: Freiburg

Stanje: dober (rabljeno), Leto izdelave: 1999, vpenjalna sila: 650 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 65-160 C2 Zapiralna sila: 650 kN Št. stroja: 641070 Št. naročila: 643883/1 Lrjdpfxeytik Re Al Nek Leto izdelave: 1999 Mednarodna oznaka velikosti: 160 C2 / 65 Obratovalna napetost: 400 V Faze: 3 Frekvenca: 50 Hz Skupni tok: 153 A Predvarovalka: 160 A Maks. tok motorja: 30 A Teža stroja: 3200 kg Lokacija: Freiburg

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 76.000 h, skupna višina: 2.480 mm, skupna širina: 2.330 mm, skupna dolžina: 9.830 mm, premer vijaka: 70 mm, vpenjalna sila: 4.200 kN, delovna prostornina: 1.047 cm³, Zapiralna sila: 4200 kN Velikost vodilnega stebra (h x v): 800 x 800 mm Velikost plošče (h x v): 1270 x 1200 mm Minimalna vgradna višina: 380 mm Maksimalna razdalja med ploščama: 1400 mm Odpiralni hod: 1020 mm Premer polža: 70 mm Prostornina hoda: 1047 ccm Vbrizgovalni tlak: 1778 bar Lsdpfjyv E Ewjx Al Nerk 2. agregat 55 z ø 22 Vbrizgovalni tlak: 1674 bar Prostornina: 30 cm³ Razdalja med plastičirno enoto 1 in 2: 300 mm (piggyback postavitev / Z-položaj) Oprema Zaslon v nemškem jeziku 6x hidravlični izvleki jedra Stroj brez manipulacije Stroj brez zalogovnika materiala Nastavljivi elementi 16x orodna gretja Dvo-komponentni brizgalni stroj Dimenzije stroja D x Š x V: 9,83 m x 2,33 m x 2,48 m Skupna masa: 23.090 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 59.000 h, vpenjalna sila: 4.200 kN, premer vijaka: 60 mm, delovna prostornina: 769 cm³, tlak vbrizgavanja: 2.200 letvica, skupna dolžina: 6.830 mm, skupna širina: 2.330 mm, skupna višina: 2.480 mm, skupna masa: 23.090 kg, Zapiralna sila: 4200 kN Dimenzije vodil h x v: 800 x 800 mm Velikost plošče h x v: 1270 x 1200 mm Minimalna vgradna višina: 580 mm Maksimalna razdalja med ploščami: 1300 mm Hod odpiranja: 720 mm Premer polža: 60 mm Volumen brizganja: 769 ccm Tlak brizganja: 2200 bar Oprema: Besedilo na zaslonu v nemškem jeziku Hidravlični izvlek jedra 4x Stroj brez manipulacije Stroj brez materialnega lijaka Nivelirni elementi Ogrevanje orodja 12x Lsdpfjyv E Dasx Al Njrk Dimenzije stroja D x Š x V: 6,83 m x 2,33 m x 2,48 m Skupna teža: 23090 kg