Injection molding machine

KraussMaffei KM 130-750-180 CXV BluePower 2-Farben 2K

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm Cedpfx Ajk Rnq Nofwori - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg Crjdpfx Aekucxlsfwsi As-new condition

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back Cedpfx Afjv D Nxlswsri - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Codpfx Aorfbnmefwsri Injection force: 182 kN Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Available from March 2024. Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor Cedpfx Ajud H Dmefwori WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Leto izdelave: 2011, stanje: rabljeno, Intervac GmbH Mobilni dvokomorni vakuumski stroj Tip: INV 11/11 Leto izdelave: 2011 230/400 V, 50 Hz, 2,5 kW Teža: 355 kg Dolžina zatesnitve: (2x) 620 mm Crodeym U Syjpfx Afwoi Dimenzije komore: (2x) 600 mm x 670 mm Skupne dimenzije: 1550 mm x 970 mm x 1220 mm.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 6.200 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.200 kN, premer vijaka: 75 mm, Krauss-Maffei KM 420-2000 CX Injection moulding machine from Krauss-Maffei with a 420-tonne clamping force. Only 6,000 operating hours in automatic mode. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras include: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The injection moulding machine is delivered REFURBISHED by the UK Transitus technical expert team. Commissioning at customer facilities can be offered, ensuring machine functionality upon installation completion. Crsdpswq D Efofx Afwoi Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g MAXIMUM DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOULD THICKNESS: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Stanje: zelo dobro (rabljeno), Double pump for Krauss Maffei machines Voith Rexroth 3-stage variable displacement pumps Type: SY2DFE1-21/071-071 KM No.: 6441936 Codpjg I Uycsfx Afwori MNR: R900751978 Photos are sample illustrations; pumps may vary in color!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, brand KraussMaffei, model KM 130-750 CX. Crjdpfx Aju Hxm Ujfwei The machine is in excellent condition, ready for immediate use, with low operating hours. Equipped with electronic injection and dosing units as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally) Core pull: 1 hydraulic Needle shut-off: pneumatic Tie bar extension: 160 mm Internal pressure sensor Selector valve Transport and loading can be organised Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your workshop? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: Cedsuggb Djpfx Afwsri KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.