Krauss Maffei Berstorff Kmc 85/2 nakup rabljenega (79.111)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, premer vijaka: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line was used for producing pipes made of PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control system in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Side feeder - Complete control system for the dosing units and extruder - Single-zone oil temperature control - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank Cedpfxeu Rda Ij Af Degu - Battenfeld K250 VA spray bath - Sica C250 - 4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Leto izdelave: 1998, stanje: dober (rabljeno), Del stare neposredne ekstruzijske linije za cevi (ki je prav tako še na voljo). Stroj je dobavljen z naslednjimi komponentami: Cgsdpex S Rimsfx Af Dsu - 4-komponentno Colortronic doziranje (nova kontrola v letu 2017) - Berstorff KMC 85/2 (polži obnovljeni leta 2019) - Stranski podajalnik (sidefeeder) - Popoln nadzor doziranja in ekstruderja - Enostavno olje-temperiranje - Maag talilna črpalka

Leto izdelave: 2016, stanje: kot nova (razstavni stroj),

Leto izdelave: 1996, stanje: dober (rabljeno), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output: max. approx. 140-180 kg/h for H-PVC pipes; actual values may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed zone heating: 1 Tool heating zones: 5 Equipment: Dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw tempering Gearbox: Gearbox was replaced at 53,000 operating hours. Overhauled screws and cylinder Cedsh Nmt Djpfx Af Dsgu Note: Current operating time is 62,590 hours.

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Cgodjyh I Emopfx Af Dju Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, Krauss Maffei SE502 MC4 krmiljenje – odstranjeno iz KM 18 C3 - odstranjeno iz delujočega stroja - povsem delujoče Proizvajalec: Krauss Maffei Tip: SE502 Cjdpfx Aferr Eh As Djgu Št. rezervnega dela: 5 Stanje: rabljeno

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 29.000 h, vpenjalna sila: 50 kN, delovna prostornina: 59 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 3.700 kg, premer polžastega transporterja: 25 mm, Freight basis: ex location Delivery time: by arrangement Payment terms: 100% prior to machine takeover, net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering (nozzle–ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL SYSTEM: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2x (hydraulic core pull unit) Air valves: 2 Hot runner control zones: 6 Cgedpfx Afsppigdj Dju Robot interface: Euromap 67 Additional equipment: quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions L x W x H: 4.4 x 1.6 x 1.9 m

Stanje: rabljeno, Krauss Maffei IPC 5-133 za MC4 krmiljenje – odstranjeno iz KM, ni testirano. Proizvajalec: Krauss Maffei Rezervni del št.: 5 Stanje: rabljeno Cedpfxorr Egwo Af Djgu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei Injection Moulding Machine KM 300-2000 CX Year of manufacture: 2010 We offer a high-quality hydraulic injection moulding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system featuring a colour monitor, integrated operator panel, and three USB ports. Thanks to its robust design and high efficiency, it is ideally suited for the production of thermoplastic components. Equipment - Fully hydraulic clamping system - MC5 control with colour monitor - Integrated control panel - 3 USB ports - Complete plasticising unit for thermoplastics - Wear-resistant screw Ø 70 mm - Non-return valve - Open nozzle Technical specifications Clamping Unit Parameter Value Clamping force 3000 kN Mould opening force 169.3 kN Platen shifting force – opening 86.3 kN Platen shifting force – closing 67.8 kN Platen dimensions (h × v) 995 × 1050 mm Tie bar spacing (h × v) 630 × 630 mm Mould opening stroke 820 mm Minimum mould height 330 mm Maximum platen opening stroke 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection Unit Parameter Value Screw diameter 70 mm Max. injection pressure 1877 bar Injection volume 1078 cm³ Shot weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220/310 rpm Electro-hydraulic System Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Dry cycle time (Euromap 6) 1350 / h Cgodpoza Uuzofx Af Deu Oil tank capacity 720 l Dimensions and Weight Parameter Value Net weight 14.5 t Dimensions (L × W × H) 6.5 × 2.2 × 2.3 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 4.517 h, vpenjalna sila: 16.000 kN, premer vijaka: 125 mm, injekcijska masa: 7.450 g, This 3-axis hydraulic injection moulding machine Krauss Maffei 1600-17200MC was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine offers a maximum shot weight of 7,450 g and a platen size of 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1600-17200MC, which we currently have for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm • Daylight (x × y): 1,800 × 1,400 mm • Max. mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN • Moving platen force: opening 177 kN / closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/back): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment: • Spare cylinder/screw set (1x) • Internal cooling system Cgjdpjyyyr Tsfx Af Dju • Core pull device (2x)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 44.858 h, vpenjalna sila: 4.200 kN, premer vijaka: 90 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, Hidravlični brizgalni stroj iz leta 2011. Krauss Maffei 420-4300 CX ima zapiralno silo 420 t in premer polža Ø 90 mm. Omogoča največje odpiranje orodja 1400 mm in razmak med stebri 800 × 800 mm. Če iščete visokokakovosten stroj za brizganje plastike, razmislite o modelu Krauss Maffei 420-4300 CX, ki ga ponujamo v prodajo. Za dodatne informacije o tem stroju nas kontaktirajte. Cedpsy S Tw Hsfx Af Dogu • Kapaciteta vbrizgavanja (PP): 1,2 kg • Minimalne mere orodja: 380 mm • Razmak med stebri: 800 x 800 mm • Največja odprtina orodja: 1400 mm • Delovne ure: 44.858 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 49.627 h, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, Hidravlični brizgalni stroj iz leta 2012. Krauss Maffei 300-2000 CX ima zapiralno silo 300 t in premer polža Ø 70 mm. Največja odprtina orodja je 1000 mm, razdalja med vodili pa 630 × 630 mm. Če iščete visokokakovosten brizgalni stroj, razmislite o Krauss Maffei 300-2000 CX, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. • Količina vbrizganega PP: 640 g • Minimalna dimenzija orodja: 320 mm • Razdalja med vodili: 630 × 630 mm • Največja odprtina orodja: 1000 mm Cedpey S Tq Hefx Af Dogu • Obratovalne ure: 49.627 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 49.533 h, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, Hidravlični stroj za brizganje iz leta 2011. Krauss Maffei 300-2000 CX ima zapiralno silo 300 t in premer polža Ø 70 mm. Največja odprtina orodja je 1000 mm, razmak med vodili pa 630 × 630 mm. Če iščete kakovosten stroj za brizganje, razmislite o Krauss Maffei 300-2000 CX, ki ga imamo na voljo za prodajo. Za dodatne podrobnosti nas kontaktirajte. • Kapaciteta brizganja PP: 640 g • Minimalne mere orodja: 320 mm • Razmak med vodili: 630 x 630 mm Cgodpfsy S Tqasx Af Deu • Največja odprtina orodja: 1000 mm • Obratovalne ure: 49.533 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Codpfxey Sl Dle Af Dsgu Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Plasticizing volume: 679 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - Touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Cgsdpfxsy Sl A Ie Af Dou Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system with 10 hot runner zones Injection unit hardened – bimetallic screw Energy-efficient machine – features a system with 3 variable delivery hydraulic pumps Parallel movements Proportional valve on injection unit – precise dosing Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 robot Year of manufacture: 2019 4-axis robot: 3 axes driven by electric servomotors; C axis – pneumatic Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, injekcijska masa: 1.464 g, skupna višina: 2.500 mm, skupna masa: 25.500 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, največja dolžina izdelka: 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection molding machine from Germany features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1200 cycles/h, it is ideal for high-volume production. Contact us for further information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz Cgodpfx Ajydnp Hof Dju • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Tie bar distance: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen size: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Moving platen opening stroke: 1400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13000 Platen dimensions (HxV) [mm]: 2210 x 1910 Tie bar spacing (HxV) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700-1400 Max. opening stroke [mm]: 3050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm3]: 5195 Injection weight PS [g]: 4728 Injection pressure [bar]: 2296 Max. injection speed [g/s PS]: 186 Electrical/hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heaters power [kW]: 71 Cgedpfoy Hqwysx Af Deu Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – cylinder thermal insulation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 70.936 h, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection molding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Please check the possibility to purchase this Krauss Maffei 420 - 4300 CX hydraulic injection molding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mold installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN Cgedsyhby Hspfx Af Dsu • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 cc • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticizing rate: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Mold sensors: Priamus (p=2 / t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 44.678 h, vpenjalna sila: 2.500 kN, This hydraulic injection moulding machine, Krauss Maffei 250 - 1000 CX, was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1,050 mm • Minimum mould installation height: 330 mm • Distance between platens: 1,150 mm • Max. total mould weight: 3,430 kg (fixed: 1,715 kg / moving: 2,286 kg) • Core-pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Wear-resistant unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C-axis combination (includes KM LRX 150 linear robot) • Hot runner controller: 12 zones • Cooling: 4 x HB 100 Codpfx Afjyhbq Eo Degu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 57.752 h, vpenjalna sila: 13.000 kN, premer vijaka: 105 mm, skupna masa: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are in the market for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC we have for sale. Contact us for further details. • International model designation: 12000 MC / 1300 • Operating hours: 57,752 h • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and current separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Fan for cabinet cooling Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Clamping Unit • Hydraulic-mechanical 2-platen clamping system • 4 pressure pads integrated in the moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operating side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant • Screw diameter: 105 mm • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle hole diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via screen • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Csdpfxsyx Ez Re Af Dsgu Temperature Control • 8 temperature control zones for hot runners • Adaptive temperature controllers • Maximum output per temperature channel: 2 kW • Temperature controllers supplied with 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage for up to 20,000 cycles • Event log • Alarm history • Graphic process curves • Trend diagrams for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature sensor 20 mA • Central computer interface • MDC (machine data collection) interface with 5 contacts • Volt-free contact for dosing unit

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mold height: 1100-1800 mm Injection volume: 5195 cm³ Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Cgedpjtrbcbofx Af Dou Robot system, core pulls, hot runner controller - The machine is in very good condition - Complete set of cutters also available - Including a conveyor belt and robot systems (Model 2012)

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), premer vijaka: 40 mm, Ta Krauss Maffei 150-520 C2 je bila izdelana leta 2002. Ima premer polža 40 mm in je opremljena z robotom Sepro ter zalogovnim transportnim trakom iz leta 2014. Stroj je delujoč, z 50.327 urami obratovanja črpalke in 36.908 urami samodejnega obratovanja. Izkoristite priložnost za nakup te hidravlične brizgalke Krauss Maffei 150-520 C2. Za dodatne informacije o stroju nas kontaktirajte. Cedpfx Ajx D Hxlof Djgu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 350–2700 C2+ Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk drive) 🔧 Clamping Unit Clamping force: 3,500 kN (350 tonnes) Opening force: 220 kN Platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1,060 × 1,095 mm Cgedpfxsyv E Nvj Af Dju Tie-bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1,300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1,829 bar Injection volume: 1,433 cm³ Shot weight (PS): 1,304 g Screw speed: 218 / 284 rpm Injection rate: - 1,508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: Thermoplastics version with abrasion-resistant protection Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1,550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Cgsdsyugkwjpfx Af Dou Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Csdpoyugfzofx Af Degu Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour monitor integrated with the control desk Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2210 × 1910 mm Tie bar spacing (H × V): 1550 × 1250 mm Mould opening stroke: 2,000 mm Minimum mould height: 600 mm Maximum mould height: 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 82 kW Number of barrel heating zones: 7 Number of dry cycles (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions and Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy loss during idle operation - Lower heating of the hydraulic system - Prolonged lifespan of motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce running costs while maintaining full production parameters.