Krauss Maffei 300-2000 CX

KraussMaffei 300-2000 CX

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei Injection Moulding Machine KM 300-2000 CX Year of manufacture: 2010 We offer a high-quality hydraulic injection moulding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system featuring a colour monitor, integrated operator panel, and three USB ports. Thanks to its robust design and high efficiency, it is ideally suited for the production of thermoplastic components. Equipment - Fully hydraulic clamping system - MC5 control with colour monitor - Integrated control panel - 3 USB ports - Complete plasticising unit for thermoplastics - Wear-resistant screw Ø 70 mm - Non-return valve - Open nozzle Technical specifications Clamping Unit Parameter Value Clamping force 3000 kN Mould opening force 169.3 kN Platen shifting force – opening 86.3 kN Platen shifting force – closing 67.8 kN Platen dimensions (h × v) 995 × 1050 mm Tie bar spacing (h × v) 630 × 630 mm Mould opening stroke 820 mm Minimum mould height 330 mm Maximum platen opening stroke 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection Unit Todpfx Aneza Uuzopjd Parameter Value Screw diameter 70 mm Max. injection pressure 1877 bar Injection volume 1078 cm³ Shot weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220/310 rpm Electro-hydraulic System Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Dry cycle time (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and Weight Parameter Value Net weight 14.5 t Dimensions (L × W × H) 6.5 × 2.2 × 2.3 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW Tjdpfxek Rnq No Anpod

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 49.627 h, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, Hidravlični brizgalni stroj iz leta 2012. Krauss Maffei 300-2000 CX ima zapiralno silo 300 t in premer polža Ø 70 mm. Največja odprtina orodja je 1000 mm, razdalja med vodili pa 630 × 630 mm. Če iščete visokokakovosten brizgalni stroj, razmislite o Krauss Maffei 300-2000 CX, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Tsdpfxoy S Tq He Anpsd • Količina vbrizganega PP: 640 g • Minimalna dimenzija orodja: 320 mm • Razdalja med vodili: 630 × 630 mm • Največja odprtina orodja: 1000 mm • Obratovalne ure: 49.627 h

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold Tjdpfouggb Djx Anpsd • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Brizgalni stroj Krauss Maffei KM 80-380 CX Leto izdelave: 2010 Enota za zapiranje Zapiralna sila: 800 kN Dimenzije vpenjalnih plošč (V × Š): 670 × 670 mm Prostor med stebri (V × Š): 420 × 420 mm Višina orodja (min./maks.): 250 mm Maksimalna odprtina: 750 mm Vbrizgalna enota Premer polža: 40 mm Volumen vbrizga: 201 cm³ Masa vbrizga (PS): 183 g Tlak vbrizga: 1860 bar Tedpfx Ajxw Upfjnped Elektro-hidravlična oprema Moč črpalnega motorja: 15 kW Moč grelcev: 10,9 kW Dimenzije in teža Dimenzije stroja (d × š × v): 4,09 × 1,48 × 2,02 m Teža (z električno omaro): 3,55 t

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 18586 Tjdpfjw E E Evsx Anpod Manufacturer: KRAUSS MAFFEI Model: KM180-750 AX All Electric Year of manufacture: 2011 Clamping unit Clamping force: 180 tons Opening stroke: 1050 mm Tie bar spacing (h x v): 560 × 510 mm Min. mould height: 200 mm Max. mould height: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight (PS): 357 g Injection pressure: 1892 bar Dimensions and weight Dimensions (LxWxH): 6.07 x 1.92 x 2.01 m Machine weight: 6,500 kg Additional information: 👉 Fully electric machine featuring maximum precision, minimal energy consumption, and outstanding process stability. This machine belongs to the proven AX series by KraussMaffei, renowned for its robust design, high performance, and reliability in industrial production environments. With a clamping force of 180 tons, this machine is ideally suited for a wide variety of technical plastic applications, including automotive, packaging, and general industrial products. Key features: * Rugged and durable construction for long-term use * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial operation * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), enabling efficient and automated parts removal, which increases productivity and reduces cycle times. Thanks to its balanced performance and flexibility, this machine represents a very attractive solution for both technical components and series production. Built in 2011, the machine is—as seen in the pictures—in good and fully functional condition.

Stanje: dober (rabljeno), Chiller, cooling water circuit, heat exchanger, cooling system for spot welding equipment, spot welding machine, spot welding installation, spot welding gun - Chiller set: complete cooling unit - Compressor: Danfoss Type: MTZ22JC4A - Pump: Lowara Type CEA70/5 0.55 kW Todpfx Anslpi Tqspod - Overall dimensions: 740/710/H930 mm - Weight: 196 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 12.000 h, vpenjalna sila: 3.000 kN, premer vijaka: 50 mm, injekcijska masa: 375 g, skupna širina: 2.100 mm, skupna višina: 2.500 mm, skupna masa: 14.600 kg, največja dolžina izdelka: 7.000 mm, Električni stroj za brizgano oblikovanje, letnik 2021. Ta ZHAFIR ZERES III 3000 / 830 / B5 ima zapiralno silo 3000 kN in maksimalno odprtje kalupa 600 mm. Ima velikost plošče 1040 x 1040 mm in premer vijačnega valja 50 mm. Če iščete visokokakovostne zmogljivosti brizganja, razmislite o stroju ZHAFIR ZERES III 3000 / 830 / B5, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Maks. odprtje kalupa: 600 mm • Min./Maks. višina namestitve kalupa: 280 / 650 mm • Maks. razdalja med ploščami: 1250 mm • Razdalja bata (V x Š): 730 x 730 mm • Min. velikost kalupa: 470 x 470 mm • Velikost plošče (V x Š): 1040 x 1040 mm • Hod izmetalnika: 160 mm • Izmetalna sila: 68,6 kN • Velikost brizgalne enote: Euromap 120 • Razmerje dolžine in premera vijačnega valja: 20 • Teoretična prostornina vbrizga: 412 cm³ • Pritisk vbrizgavanja: 2000 bar • Pritisk zadrževanja: 1600 bar • Hitrost vbrizgavanja: 160 mm/s • Vbrizgavanje (PS): 274 g/s • Hitrost vrtenja vijačnega valja: 320 vrt/min • Stopnja plastifikacije: 46 g/s • Pritisk na šobo: 85 kN • Moč grelnega valja: 20,2 kW • Priključna moč: 36 kW / 60 A • Hidravlični pritisk: 175 bar • Hidravlični pretok: 90 l/min • Prostornina rezervoarja za olje: 135 l • Prostornina lijaka za material: 50 l • Nadzorni sistem: Sigmatek z 15-palčnim barvnim zaslonom na dotik • USB vmesniki: 3 • Vmesnik za robota: Euromap 67 • Adapter za robota: Euromap 18 • Pomnilnik podatkov kalupa: do 200 kalupov • Zbiranje podatkov o proizvodnji: do 100.000 ciklov • Sistem za statistični nadzor procesa (SPC) • Centralni sistem za mazanje • Avtomatska nastavitev višine kalupa • Kompakten 5-točkovni sistem zapiranja s kolenskim mehanizmom Todpfx Anoyrgq Eeped • Hidravlični sistem izmetalnika z vibracijsko funkcijo • Paralelno odpiranje kalupa in izmetalni gib • Do 3 hidravlične izmetalne osi • Sistem za distribucijo hladilne vode • PID regulacija temperature • Keramični grelni pasovi s termoelementi • Avtomatska funkcija izpiranja • Izolacija valja za varčevanje z energijo • Nastavljive strojne noge • Montažno orodje je vključeno v dobavo • Delovnih ur: približno 12.000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machinery: From 01.07.2025, used machines can also be depreciated for tax purposes with a special depreciation rate of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster (§ 7 Para. 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-colour, 2-component machine Control: MC6 Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st Injection Unit 750 horizontal Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping Unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – full machine card as PDF document attached Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pull 1 x blow-off Water BGS: 6 circuits each, nozzle side and ejector side BluePower technology up to 40% energy savings The machine is very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Todpfx Aoyf Uy Ujnpsd Free loaded onto the buyer's truck or delivered to site with freight costs reimbursed. Information about the machines we offer and our company: - We only sell machines acquired from ongoing production from our own stock in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers trading third-party property - All machines offered come from successful businesses where maintenance and care are standard - All offered machines can be inspected at our warehouse

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Model: EM 75-120 Unilog B4 All-electric Year of manufacture: 2005 Clamping Unit Clamping force: 75 tons Opening stroke: 800 mm Tie bar spacing (h x v): 405 x 405 mm Min. mold height: 150 mm Max. mold height: 480 mm Injection Unit Screw diameter: 18 mm Shot volume: 30 cm³ Shot weight PS: 27 g Injection pressure: 2440 bar Dimensions and Weight Overall dimensions (LxWxH): 4.5 x 1.7 x 2.0 m Machine weight: 4,500 kg Additional Information: BATTENFELD EM 75/120 UNILOG B4 All-electric precision injection moulding machine Tjdpfswl Rucjx Anped The BATTENFELD EM 75/120 UNILOG B4 is a high-quality all-electric injection moulding machine manufactured in Austria. The EM series by BATTENFELD was already among the most advanced servo-electric machine concepts in its class at the time, specifically developed for energy-efficient and highly precise production processes. All main movements of the machine are driven by state-of-the-art servo motors. As a result, the machine offers: * very low energy consumption * high repeatability * smooth and quiet operation * low maintenance costs * stable and precise production processes The machine is particularly suitable for: * technical plastic parts * electronic components * precision parts * small and medium series production Thanks to the all-electric technology, substantially improved energy efficiency and process stability are achieved compared to conventional hydraulic machines. Equipped with the proven BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * reliable servo axis control The machine has approximately 69,094 operating hours and is in well-maintained optical and technical condition. Notable features include: * a clean control cabinet * well-maintained mechanical components * well-preserved servo units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic production.