Krüsi Cm40 nakup rabljenega (12)

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Year of manufacture: 1996 Krüsi CM40, consisting of the following components: - Circular saw (cross-cut saw) - Log home milling unit, horizontal and vertical - Groove milling (horizontal) - Boring unit - Infeed table 6 m - Outfeed table 6 m KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 CE marked Condition: Good, technically inspected and cleaned / ready for operation Operating Principle: Processing of timber for chalet / log house construction. Beams can be processed in a single pass - Cross-cutting - Horizontal and vertical milling of tenons/grooves in a single clamping - Drilling - Cutting the end grooves Workpiece capacity: - Maximum cutting height: 200 mm - Maximum cutting width: 250 mm Sturdy construction with welded frame. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, with hardened and ground guideways for maximum machining precision. Carriage guidance via dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control, Motors protected by thermal relay. Electrical equipment for 380 V, 50 Hz, with protective covers, Central connection for customer-side chip extraction, with 2 eccentric clamps, without milling tools (groovers). With hydropneumatic horizontal and vertical feed, electrically controlled, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air maintenance unit. Timbers thicker than 14 cm must be processed in two passes. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analogue scale Saw blade Ø max. / bore-Ø: 400 / 30 mm Carbide-tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed [min-1]: 2900 Power (kW): 2.2 2. CM Milling Unit (Log House Unit) Hydropneumatic feed Spindle adjustment with digital readout Horizontal milling unit Cutter Ø: 180 mm Cutter width max.: 130 mm For cutter widths above 60 mm, only alloy cutters with indexable inserts may be used 2 motors, hydropneumatic feed, 2.2 kW each Feed: hydropneumatic Rapid traverse and working feed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analogue scale Drill holder: ER 25 collet Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Iedpfx Aovfv Tfobxsau Motor [min-1]: 1450, 1.8 kW 4. Planing Milling Unit: Hydropneumatic feed Spindle adjustment with digital readout Cutter Ø max.: 230 mm Cutter width max.: 60 mm Motor [min-1]: 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Operating pressure on site min/max MPa (bar): 0.7/1 (7/10) Air consumption Nm3/h: 8 Electrical Equipment Operating voltage V/Hz: 380, 50 Rated power (kW): 8.8 - 15.8 depending on version Customer-side fuse protection: 3 x 25 A tr

Stanje: dober (rabljeno), Leto izdelave: 1994, I am selling an automatic CNC machining center for BLOCK-HOUSE production, Krüsi CM-40. Year of manufacture: 1994. - Crosscut saw - Tenoning unit (top and bottom) - Tenoning unit (left and right) - Dowel drilling unit - 4-head milling aggregate - Automatic feed system ±1mm - Infeed length: 12m Ijdpfx Abjr Atcysxoau Ideal for timber construction applications! Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Available at short notice – YOUR OPPORTUNITY! We are offering our well-maintained and fully operational chalet machining center from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to a different model, you now have the chance to acquire this flawless machine. It is still in use, so functionality tests and trial runs are possible at any time. Collection and dismantling by the buyer Assembly recommended in consultation with Krüsi Year of manufacture: 2018, in operation since 2019 Total length with tables: approx. 35.5 m Available from 08/2026 Machine details: Ijdpfey Ri Huex Abxsau - 4 milling units (each 4 kW), spindle drives via timing belts - Max. working area: 250 mm building height, 245 mm wall thickness - Equipped with 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles (horizontal) - Pneumatic under-table crosscut saw left, 5.5 kW with frequency converter - Manually operated drilling unit, 1.8 kW, mounted on right column - Hydropneumatic feed for drilling unit - Additional vertical pneumatic clamping cylinder with holder - Additional horizontal pneumatic clamping cylinder with holder - Extension table for milling unit with additional vertical clamping cylinder - 0.5 m stop rail, mounted front left of machine column - 0.5 m stop rail, mounted front right of machine column - Additional table for short workpieces - Steel chip funnel for pit extraction - Dovetail and face slot milling unit (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rebate cutter Ø 180 mm, adjustable 61–240 mm x 40 mm, Z=2 For vertical milling units: - WPL rebate cutter Ø 230 mm, adjustable 61–240 mm x 40 mm, Z=2 - WPL rebate cutter Ø 270 mm, adjustable 61–240 mm x 40 mm, Z=2 For drilling unit: - Drill bit Ø 20 mm, with long centering tip - Drill bit Ø 30 mm, with long centering tip For 90° swiveling dovetail and face slot milling unit: - WS rebate cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip breaker flutes, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip breaker flutes, MK 863-2 - Spanner for above dovetail cutters Accessories: Horizontal (top): - WS groove and tenon cutter, aluminium, Ø 270 mm, bore Ø 40 mm, adjustable 21–40 mm - Central section aluminium Ø 270 mm, width 30 mm, bore Ø 40 mm, Z2 - Central section aluminium Ø 270 mm, width 50 mm, bore Ø 40 mm, Z2 Horizontal (bottom): - WS adjustable rebate cutter, aluminium, Ø 180 mm, bore Ø 40 mm, adjustable 26–50 mm, 2 x Z3 F3 - Central section aluminium Ø 180 mm, width 40 mm, bore Ø 40 mm, Z2 Vertical (front): - WS groove and tenon cutter, aluminium, Ø 270 mm, bore Ø 40 mm, adjustable 21–40 mm - Central section aluminium Ø 270 mm, width 40 mm, bore Ø 40 mm, Z2 Vertical (rear): - WS adjustable rebate cutter, aluminium, Ø 180 mm, bore Ø 40 mm, adjustable 26–50 mm, 2 x Z3 F3 - Central section aluminium Ø 180 mm, width 30 mm, bore Ø 40 mm, Z2 Safety cover for horizontal top with holder (for cutter Ø 270 mm) Safety cover for vertical rear with holder (for cutter Ø 180 mm)

Stanje: dober (rabljeno), Leto izdelave: 1998 ZA 66 /95 Z laserskim prikazovalnikom linije reza Dimenzije: 5700 x 1500 x 1900 mm Paralelogramska miza nastavljiva do 60 stopinj 4 motorji Prirezovalna enota Višina reza: 290 mm Premer žaginega lista: 750 mm Motor 5,5 kW Prižagalna žaga Globina reza: 175 mm (list 450 mm) Globina reza: 225 mm (list 550 mm) Iajdpfx Aey Am Eljbxju Motor 10 kW Odsedne žage, vsaka 2,2 kW Globina reza: 125 mm Premer žaginega lista: 350 mm Nastavljivo do 45 stopinj

Stanje: zelo dobro (rabljeno), Priložnost iz likvidacije: Krüsi ZA 66, vrtljiv, premičen Ijdpfx Aeylpv Debxeau

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Up to 140 mm round timber corner joints Iedpovwfqqjfx Abxjau Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Stanje: zelo dobro (rabljeno), STROJ ZA REZKANJE BRUN ZA IZDELAVO KOTNIH SPOJEV BRUNARIC Z REZKANJEM ŠTIRIH STRANI BRUNA. MAKSIMALNA DOLŽINA BRUNA 6000 MM (RAZDALJA MED OPRIJEMALI 5770 MM) MINIMALNA DOLŽINA 450 MM 4x GLAVE ZA REZKANJE NA VSAKI STRANI (2 STRANI) ZMOGLJIVOST: 3 CIKLI NA MINUTO MAKSIMALNA ŠIRINA 250 MM MAKSIMALNA DEBELINA 140 MM PRILOŽENO NASTAVLJIVO ORODJE PRIMERN0 ZA SPOJE 34 MM DO 70 MM 8x 4 kW REZKALNI MOTORJI Iaedpfjy Sgx Rox Abxeu DIGITALNI SISTEM MERJENJA DOLŽINE ENOSTAVNI ELEKTRONSKI UPRAVLJALNI SISTEM (BREZ PLC) 5,5 kW MOTOR ZA PODAJO MOŽNOST DOBAVE S KUPALNO ENOTO PO ŽELJI PRILAGOJENA LEVA STRAN ZA POTREBNO DOLŽINO ČEZSTREŠKA ZELO KVALITETNO UTORJENJE CENA ZA DEMONTIRANO IN NALOŽENO NA TOVORNJAK

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Dve stroji v enem, izdelani pri najboljšem švicarskem proizvajalcu CNC strojev. 1. Obrezovanje hlodovine 2. Lesen skelet (timber framing). Stroj je šest let proizvajal precizno obdelane hlodovine visoke kakovosti, za zelo zahtevne kupce (od takrat v mirovanju). Namenjen naprednim gradbenikom, ki želijo avtomatizirati proizvodnjo izdelkov iz obdelane hlodovine do debeline 8" x 12", ali uporabiti zgolj za leseno skeletno gradnjo. Najbolje ustreza kupcem v ZDA ali Kanadi zaradi enostavnega tovornjaškega prevoza. Dostava, namestitev, kalibracija in uvajanje v obratovanje so možni po dogovoru in za doplačilo. Samostojen sistem - Kompaktna zasnova, le 10 čevljev globine in 8 čevljev širine. - Vsi postopki potekajo znotraj zaščitnega ohišja. Ijdpfx Aewvwl Ajbxoau - Odlomki se zbirajo in odstranjujejo iz osrednje jame. - Žagovina in odpihani ostružki se odstranjujejo z zračnim sesalnim sistemom, kar ohranja delovno okolico izjemno čisto. - Izjemno tih, tako da se lahko ob stroju med delovanjem normalno pogovarjate.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, številka stroja/vozila: 0505/526/446705, delovna širina: 4.050 mm, maks. debelina aluminijaste pločevine: 6 mm, najv. debelina jeklene pločevine: 5 mm, maks. debelina pločevine iz nerjavečega jekla: 3 mm, skupna masa: 13.200 kg, For Sale: Colgar Guillotine Shear CM 4005 We offer you the opportunity to purchase a high-quality Colgar Guillotine Shear CM 4005. This powerful machine is ideal for anyone working in sheet metal processing and looking for maximum precision and efficiency. Product details: - Model: CM 4005 - Year of manufacture: 2005 - Condition: used - Technical specifications: Weight: 13,200 kg Cutting length: 4,050 mm Blade length: 4,200 mm Working range: 4,200 mm Gap between uprights: 250–500 mm - Capacity: Steel: 5.0 mm Aluminium: 6.0 mm Stainless steel: 3.0 mm Ijdey Rzvuopfx Abxeau Advantages: - High precision and reliability - User-friendly control interface - Low maintenance and durable Location: Eder Blechbau Frankenweg 2 9100 Völkermarkt If you are interested or require further information, please do not hesitate to contact us. "The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. As soon as the machine is made available at the named place, the buyer assumes all costs and risks, including loading, transport, and customs formalities."

Stanje: novo, Leto izdelave: 2025, Tlak 3,3 pri 6 bar Ijdpfoy Umf Aex Abxsau t Vgradna višina 250 mm Hod 70 mm Delovni hod 10 mm Površina mize 220x190 mm Izpetje 150 mm Teža stroja cca 350 kg Dvoročno upravljanje Prazni hod 60 mm / delovni hod 10 mm Elektropnevmatski varnostni sistem preko dveh 5/2 ventilov z nadzorom položaja Nastavljiv regulator tlaka za delovno silo Nastavljiv ventil za regulacijo hitrosti Nastavljiv čas stiskanja CE oznaka

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, SIPREM INTERNATIONAL PCM 400 Profesionalna kontinuirana pnevmatska membranska stiskalnica za visoko zmogljivo predelavo grozdja. Model: Siprem PCM 400 Tip: Kontinuirna membranska stiskalnica Kapaciteta obdelave: 32 – 45 ton/uro (sveže grozdje) Največja kapaciteta: do 55 ton/uro (fermentirano grozdje) Iedpfx Aoy R I Drebxjau Leto: 2004 Teža: 13.000 kg Stanje: Odlično industrijsko stanje, popolnoma delujoča. Ključna prednost: V nasprotju s serijskimi stiskalnicami ta sistem omogoča neprekinjeno 24/7 predelavo grozdja z visoko kakovostjo iztisa mošta.

Leto izdelave: 2000, stanje: dober (rabljeno), Hosokawa Mikropul ACM 30 / ACM 40 mill - Grinding disc motor: 30 kW - Separator motor: 7.5 kW Weight: 800 kg Dimensions: 1.5 x 0.6 x 1.4 m (H) The mill is in very good condition and fully functional! Included in the scope of delivery: cyclone with cyclone separator head, filter, explosion relief valves, and much more. Ijdpfx Abebichuoxoau