Koepfer Stroj Za Rezkanje Zobnikov - Vodoravni nakup rabljenega (92.273)

Stanje: zelo dobro (rabljeno), Premer kolesa – maks. 175 mm Širina kolesa 350 mm Ljdpfx Aaeznnitomoad Modul – maks. 3 Modul – min. 0,5 Masa stroja pribl. 0,9 t Potreben prostor pribl. 1,2 x 0,8 x 1,4 m

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm Ledpfx Aaet Hw D Rjmjad max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Lasdpfxet Hwxbe Aamjd Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Modul – maks. 2 Dolžina rezkalnika: 135 mm Skupna potrebna moč: 2,2 kW Masa stroja: pribl. 1420 kg Potreben prostor: pribl. 2,00 x 1,60 x 1,43 m --> Tehnični podatki: največji premer rezkalnika: Ø 150 mm --> največja dolžina rezkalnika: 135 mm --> največji modul: 2 --> premer vretena: Ø 24 mm --> vpenjalna priprava vretena: MK-4 --> hitrosti vretena: 140 – 1120 vrt/min. Laodezkvuvspfx Aamed --> avtomatski pomiki Oprema in dodatna oprema: sistem za hlajenje, rezkalniki, zamenljiva kolesa, navodila za uporabo

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears Lasdevz Ec Ijpfx Aamod - Milling arbors - Clamping devices Dra8M7 - Documentation

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 130 mm Širina kolesa 180 mm Modul - maks. 2,5 Modul - min. 0,3 Hitrost vrtenja 140 - 900 vrt/min Število zob - min. 4 Največja vpenjalna dolžina 200 mm Krmiljenje Siemens Premer obdelovanca - maks. 80 mm Skupna potrebna moč 3,5 kW Teža stroja pribl. 2,9 t Ljdpfjy Umizox Aamead Potreben prostor pribl. 1,8 x 1,6 x 1,9 m

Stanje: dober (rabljeno), Premer kolesa - max. 145 mm Širina kolesa 110 mm Laodoy Ivdhepfx Aamjd Modul - max. 2 Modul - min. 0,3 Hitrost vrtenja 112 - 1000 obr/min Število zob - min. 6 Največja vpenjalna dolžina 150 mm Skupna potrebna moč 3,5 kW Teža stroja pribl. 1,3 t Potrebni prostor pribl. 1,3 x 0,8 x 1,4 m

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Laodpovzhf Ssfx Aamjd Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: dober (rabljeno), Leto izdelave: 1991, Machine weight approx. 6 t The design of the base machine is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece is mounted between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive range of accessories Technical data: - Maximum module for gear hobbing cutters according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece diameter for manual loading: 200 mm - Max. workpiece diameter for automatic loading: 150 mm - Maximum workpiece length: 400 mm - Largest / smallest cutter diameter: 102 / 40 mm - Maximum cutter length: 230 mm - Largest / smallest cutter arbor diameter (standard): 32 / 16 mm - Axial slide travel = maximum milling length Z-axis: 300 mm - Radial slide travel X-axis: 140 mm - Shift slide travel (shift movement) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swiveling angle of shift milling head (left/right) A-axis: 50° / 60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm (*assuming '1ß0' is a typo for 100) - Y-axis (front face of milling spindle): 50 - 230 mm - W-axis (front face of tailstock spindle): 165 - 585 mm - Cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min Lajdpeub Amfofx Aamod

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Premer kolesa - max.: 80/120 mm Modul - max.: 2,5 Največji dovoljeni premer glave: 65 mm Najmanjši dovoljeni premer rezkalnega trna: 22 mm Največja zobljena dolžina: 140 mm Največja dolžina: 120 mm Pomik sani aksialno (Z-os): 320/400 mm Mere (dolžina/širina/višina): 3270 x 3240 x 2020 mm Teža stroja pribl.: 6 t Ledpfx Aoxrwpkjamead P60 – Kompaktni vsestranski stroj za zobnike, osi in polže P60 je najmanjši model v seriji Gleasonovih horizontalnih navojnih rezkalnih strojev. Ta vsestranski stroj ne reže le cilindričnih zobnikov z vsemi vrstami profilov, temveč je tudi optimalna rešitev za strojno obdelavo volanskih zobnikov in polžev. Z avtomatskim sistemom za nalaganje, izsesovalno napravo, transporterjem ostružkov, z uravnoteževalno napravo in 2 konjički, s sistemom za nadzor procesa Artec, tip CTM-BT1.1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Siemens Sinumerik 840 D, 5-osno krmiljenje. Ledpfxjza Egbe Aamead Največji premer kolesa: 2000 mm Širina kolesa: 700 mm Teža stroja: 35.000 kg Prostorske zahteve: pribl. 6,9 x 8,4 x 3,7 m

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Ledpfst Hw Hxox Aamead Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Lsdpot Hw R Djfx Aamoad Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1967, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150:10486, premer zobnika: 150 mm, skupna višina: 1.400 mm, skupna širina: 800 mm, premer obdelovanca (maks.): 150 mm, največja hitrost vretena: 1.000 obr/min, hitrost vretena (min.): 112 obr/min, skupna masa: 1.300 kg, premer orodja: 50 mm, Na prodaj je preverjen stroj za rezkanje zobnikov Koepfer 150. Stroj je idealen za gospodarno izdelavo cilindričnih zobnikov, zobčnih koleščkov in drugih zobničenj tako v posamezni kot v serijski proizvodnji. Lodpfx Ajzfhyyeamoad

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC-obdelovalni stroj za zobnike / CNC-stroj za izdelavo zobnikov z valjanjem Nadzorni sistem: Siemens 840 D Power Line Tehnični podatki: Največji premer obdelovanca: 150 mm Premer mize: 145 mm Največja hitrost vrtenja mize: 800 vrt/min Razdalja med osmi / med centri: 10 – 200 mm Največji axialni hod: 250 mm Kot nagiba glave za rezanje: +/- 45° Največji hod vodila: 300 mm Največja hitrost hitrega premika: 17.000 mm/min Moč pogona glave za rezanje: 19 kW Največji modul: 3 mm Največja hitrost vrtenja vretena za rezanje / hitrost vrtenja orodja: 4.500 vrt/min Največji premer orodja za valjanje: 80 mm Največja dolžina orodja za valjanje: 200 mm Ledpfx Aaezkwvnemead Približne mere: 5,5 x 3,7 x 3,1 m Približna teža: 9.500 kg Oprema: Transportni sistem za odrezke Sesalni sistem za oljne pare / sesalni sistem za olje Hladilnik olja Podpirač z mehanizmom za spuščanje in navpično nastavitev Rotacijski podajalnik z dvema ročnima prijemaloma za obdelovance Sistem transportnega traku za samodejno podajanje 5 kosov vpenjal za rezalnike / vpenjal za orodja za valjanje: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Drugo: Video posnetki preko WhatsApp

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107253, Prosimo, sporočite nam vašo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. Cena brez embalaže; pogoj dostave: FCA (lokacija stroja). ===== Lasdpfxezlrfys Aamod Tehnične podatke si oglejte v priloženi brošuri. Izključeno je vsakršno jamstvo. Ne prevzemamo odgovornosti za pravilnost tehničnih podatkov in letnika izdelave, za popolnost dodatne opreme in orodja, ter za upoštevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih o preprečevanju nesreč. Prodaja samo podjetjem, ne posameznikom. Prodaja samo znotraj Evrope, vključno s Turčijo. Cena brez embalaže; pogoj dostave: FCA (lokacija stroja). ===== Tehnične podatke si oglejte v priloženi brošuri. Nemški jezik je vodilni jezik. Brez jamstva in garancije, vključno s popolnostjo orodij in dodatne opreme ter okoljskimi in varnostnimi predpisi. Prodaja ni dovoljena posameznikom.

Stanje: rabljeno, TEHNIČNI PODATKI - Maks. premer obdelovanca: 80 [mm] - Z-pomik: 220 [mm] - Maks. modul: 2,5 - Maks. hitrost vretena nosilca obdelovanca: 3000 [vrt/min] - Maks. dimenzije valjčne rezkalke (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkalke: 200-5000 [vrt/min] - Preklopni hod: 140 [mm] - Kotni pomiki rezkalne glave: -45/+115 [stopinj] Lodeyuzggspfx Aamead - Potreben prostor: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmiljenje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, TEHNIČNI PODATKI - Največji premer obdelovanca: 80 [mm] - Z-premik: 220 [mm] - Največji modul: 2,5 - Največja hitrost vretena nosilca obdelovanca: 3000 [obr/min] - Največje dimenzije valjčne rezkarice (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkarja: 200–5000 [obr/min] - Premik za preklop: 140 [mm] Laodpfjyuzgasx Aamed - Kotni premiki rezkalne glave: -45/+115 [stopinj] - Potrebna površina: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmilje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, Tehnične podrobnosti: Z-hod: 1250 mm Premer vrtenja nad ležiščem: 260 mm Premer obdelovanca nad ležiščem: 500 mm Premer obdelovanca nad suportom: 250 mm Višina konice nad ležiščem: 260 mm Lajdpfx Aov U Un Hoamsd Dolžina rezkanja: 2000 mm Maks. modul: 8 / 12 Skupna potrebna moč: 9,5 kW Približna teža stroja: 3,8 t

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Z veseljem bom v dokument vključil tehnične podatke. Z veseljem vam bom v dokument vključil tehnične podatke. Stroj za izdelavo zobnikov (hoblovka) konvencionalni Država izvora: Nemčija Tehnične specifikacije Podrobnosti Ljdpfezmqalsx Aamjad največji premer zobnika 800 mm širina zobnika 250 mm največji modul 8 skupna poraba moči 2,2 kW teža stroja približno 2000 kg dimenzije stroja približno 2500 x 1600 x 1900 mm premer rezalnika največ 250 - 285 mm premer vpenjalne mize 460 mm premer luknje v mizi 70 mm dodatna oprema: različna Krmilna enota konvencionalna Dodatne informacije Dokumenti Z veseljem vam bom v dokument vključil tehnične podatke. Z veseljem vam bom v dokument vključil tehnične podatke. Stroj za izdelavo zobnikov (hoblovka)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 7.556 h, Funkcionalnost: popolnoma funkcionalen, 4 x LIEBHERR LC 280 DC stroji za odvalno rezkanje zobnikov Naprodaj so 4 identični LIEBHERR LC 280 DC CNC odvalni rezkalni stroji za obdelavo zobnikov, vsi letnik 2024. Proizvajalec: Liebherr Verzahntechnik GmbH Model: LC 280 DC Tip stroja: CNC odvalna rezkalka z integrirano enoto ChamferCut Na voljo: 4 kosi Letnik: 2024 Primer št. stroja: XXX Krmiljenje: Siemens CNC / vidna HMI-upravljalna površina Tehnični podatki: Maks. premer obdelovanca: 280 mm Maks. modul: 6 mm / 4 mm, odvisno od izvedbe Premik v osi: 400 mm Shift hod: 200 mm Maks. premer odvalnega rezkalnika: 150 mm Hitrost rezkalnika: 2.250 / 6.000 min⁻¹ Hitrost vrtenja mize: 250 / 800 min⁻¹ Maks. modul ChamferCut: 5 mm Maks. hitrost orodja ChamferCut: 2.000 min⁻¹ Maks. premer orodja ChamferCut: 130 mm Maks. dolžina vpenjanja izvrtalnega orodja: 236 mm Maks. dolžina vpenjanja stebelnega orodja: 360 mm LC 280 DC je kompakten odvalni rezkalni stroj za obdelovance do premera 280 mm z integriranim postopkom ChamferCut. Po podatkih Liebherra je zasnovan za odvalno rezkanje in sočasno definirano raziglevanje/posnemanje robov. ([Liebherr][1]) Oprema: - Integrirana enota ChamferCut - Avtomatsko rokovanje z obdelovanci / krožni zalogovnik - Siemens CNC upravljalnik - Liebherr HMI / proizvodna površina - Vreteno za obdelovanec - Glava za odvalno rezkanje - Enota za raziglevanje/posnemanje robov - Popolnoma zaprta kabina - Osvetlitev delovnega prostora - Vmesnik za avtomatizacijo - CE označevanje - Stroj primeren za suho in mokro obdelavo, odvisno od opreme in procesa Električni podatki po stroju, označeni na tipski ploščici: Lodpfxjzdv Ups Aamjad 400 V AC 50 Hz Krmilna napetost: 24 V AC Vgrajena moč: 29 kVA Nazivni tok: 42 A cos φ: 0,81 Zavarovanje: 63 A gL Teža elektro omare: 900 kg Vsi 4 stroji so identični, letnik 2024, iz sodobne industrijske serijske proizvodnje. Tehnični podatki po tipski ploščici, proizvajalčevih specifikacijah in slikovni dokumentaciji. Pridržujemo si pravico do napak in predprodaje.

Stanje: dober (rabljeno), Stroj za obdelavo zobnikov z valjanjem, stroj za rezanje, orodjarski stroj za rezanje, vertikalni stroj za rezanje, stroj za obdelavo zobnikov z valjanjem, zmogljiv stroj za obdelavo zobnikov z valjanjem. -Proizvajalec: Liebherr, zmogljiv stroj za obdelavo zobnikov z valjanjem, tip SS 5-K/500 -Delovni obseg: Ø maks. 500 mm -Maks. premer rezalnika: 186 mm Lsdpfx Aaev Dtmmjmoad -Dodatna oprema: vključno z obsežno dodatno opremo, glej fotografije -Ni vključeno: šablona za poševno ozobitev -Dimenzije stroja: 2300/1460/V1870 mm -Dimenzije dodatne opreme: palete 1420/1300/V300 / 1200/800/300 mm -Teža: 5300 kg plus 535 kg dodatne opreme

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, The perfect retrofit machine! Mechanically in exceptional condition! This machine can be inspected under power until 12.05.2026. After this date, it will be dismantled due to space constraints. Please find attached the current KLINGELNBERG measurement protocols available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in very good condition Functionality: Fully operational Inspection: Possible under power Technical specifications: - Rated workpiece diameter: 800 mm - Max. workpiece diameter: 800 mm - Max. workpiece diameter, special version: 1,200 mm - Rated module: 20 / 30 mm - Rated module, special version: 25 / 35 mm - Drive power: 35 kW - Drive power, special version: 52 kW - Cutter head speed range: 20 - 200 rpm - Cutter head speed range, special version: 26 - 265 rpm - Additional cutter head speed range, special version: 36 - 360 rpm - Swivel range of cutter head: +30 / -45 degrees - Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm - Center distance workpiece/tool, min./max.: 50 / 600 mm - Center distance workpiece/tool, special version: 50 / 800 mm Lajdpfey Hfm Nox Aamjd - Max. axial slide travel: 700 mm - Max. axial slide travel, special version: 1,000 mm - Max. axial slide travel, special version: 1,300 mm - Lowest cutter head position above table: 450 mm - Table diameter: 800 mm - Table bore diameter: 245 mm - Table bore depth: 875 mm - Max. table speed: 15 rpm - Max. table load: 10,000 kg Machine dimensions: - Width A: 5,800 mm - Length B: 6,900 mm - Height C: 4,700 mm - Machine weight: 22,000 kg Regarding the values of the current KLINGELNBERG gear measurement reports before the grinding process: "Pitch and lead are unremarkable. In the profile, one measurement shows an fHα deviation at the limit or slightly outside the tolerance. Please check whether this value is permissible according to the drawing/customer approval or if correction or reworking is required. The gears have always been passed on to the RZ 1000 REISHAUER for grinding and were ground accordingly. Nevertheless, an overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, zelo dobro ohranjeni odvalni rezkalni stroj blagovne znamke PFAUTER, tip P251, z menjalnimi zobniki. Ljdpozcncdsfx Aamoad

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Premer kolesa - maks. 130 / 80 mm Širina kolesa 180 mm Modul - maks. 4 Lajdpfx Aoxlug Hoamsd Modul - min. 0,5 Vretenaste hitrosti - brezstopenjsko 300 - 3000 obr/min Krmiljenje Siemens 840 D x-hod 200 mm y-hod 170 mm z-hod 250 mm Rezkalna glava - nagibna + / - 45° Premer mize 168 mm Luknja v mizi 65 mm Največja vpenjalna dolžina 245 mm Območje vrtenja mize 0 - 1000 obr/min Skupna potreba po moči 51 kW Teža stroja pribl. 9,2 t Prostor za postavitev pribl. 4,5 x 4,0 x 3,2 m