Jakob Müller Frick Ag Steznik Za Trakove nakup rabljenega (99.830)

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration Chjdpfx Aqor I Am Hotjb with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Cjdpfor Ix Igsx Aqtehb Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Zum Verkauf stehen: Mehrere (6 Stück) Jakob Müller MVC 150 der ersten Generation: MVC 150 8/46mm Bj. 1988 88.60237 Nr. 309 MVC 150 8/46mm Bj. 1988 88.60085 Nr. 319 MVC 150 8/46mm Bj. 1988 88.60319 Nr. 332 MVC 150 10/36mm Bj. 1988 88.60041C Nr. 314 MVC 150 10/36mm Bj. 1988 88.60041B Nr. 313 MVC 150 6/66mm Bj. 1988 88.60000 Nr. 307 Cjdpfov Hxltsx Aqtehb Baujahr: 1988 Zustand: gut laufend und komplett Preis: 3.900,- Euro

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, For sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm (192 hooks) machines from 1999, 2000, and 2003, refurbished in 2024 to like-new condition. Csdpfov Hxq Ajx Aqtshb

Stanje: rabljeno, Leto izdelave: 1991, Zum Verkauf stehen 10x Jakob Müller Frick CH MVC 150 Müdata 4 Etiketten-Webmaschinen. Verkauf ausschließlich als Komplett-Set für 50.000,- €. Einzelpreis pro Webmaschine: 5.000,- € Details der Maschinen: - 1989, 12/30mm, An: 89.30018 Müdata 4, Nr. 70 Cjdjv T Nb Sjpfx Aqtjhb - 1990, 12/30mm, An: 90.30452 Müdata 4, Nr. 71 - 1990, 12/30mm, An: 90.30370 Müdata 4, Nr. 72 - 1990, 8/46mm, An: 90.30337 Müdata 4, Nr. 325 - 1991, 12/30mm, An: 91.30247 Müdata 4, Nr. 73 - 1990, 7/57mm, An: 90.30166 Müdata 4, Nr. 76 - 1990, 7/57mm, An: 90.30461 Müdata 4, Nr. 77 - 1990, 9/36mm, An: 90.30371 Müdata 4, Nr. 78 - 1990, 9/36mm, An: 90.30080 Müdata 4, Nr. 79 - 1991, 7/57mm, An: 91.30312 Müdata 4, Nr. 80 Alle Webmaschinen sind in gutem Zustand und laufen einwandfrei.

Leto izdelave: 1965, stanje: rabljeno, številka stroja/vozila: 2383, for pipe Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: manual space requirement: 1000 x 800 x 1200 mm Chedpob Nv Stsfx Aqtob weight: approx. 70 kg

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations Chjdpfel D Rp Eox Aqtjb

Stanje: rabljeno, Holz Her Sprint 1312 FÜ + PU močna izvedba – debelina robov 0,4 - 12 mm SPS zaslonsko upravljanje Predrezkalna enota za pripravo pred lepljenjem Popolnoma avtomatski podajalnik robnega materiala za rolo in trak Lepilna postaja za kartuše + PU-lepljenje samodejna testna šoba Višina obdelovanca 6-55 mm Kap enota za rolo in trak do 12 mm debeline robu z nastavljivim naklonom kap žage od 0-10° Rezkalna enota, poravnava do 12 mm, rezkanje radijev – fazno rezkanje – 15° MOT – 4 osi Strgalska enota za faze in radije z 2 pnevmatskima nosilcema strgal pnevmatsko vklapljanje in izklapljanje Površinska strgalska enota – finish Sistem za pršenje – PU Chodpfxjx Eilqj Aqtob Stroj v ODLIČNEM STANJU iz zaloge Lieboch

Stanje: rabljeno, Hebrock K34 Chedpfx Aowtfvkjqteb Debelina roba do 8 mm SPS zaslon s 15" zaslonom na dotik Predrezalna enota za pripravo pred lepilnim delom (3 mm) Lepilna kad z zamenljivim rezervarjem in izpustom lepila Največja višina roba: 60 mm Odrezovalna enota Rezkalna enota za poravnavo/radije/fazete Enota za zaobljanje vogalov (radiji/fazete) Večradijski strgalnik (R1/R2) Nesting Površinski strgalnik Naprava za brizganje ločilnega sredstva Letnik 2023, 52 delovnih ur Stroj je KOT NOV, V VRHUNSKEM STANJU Iz razpuščene mizarske delavnice/pokojnina Iz mizarske delavnice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Debelina robov: 0,2 – 12 mm Dimenzije obdelovanca: Širina min. 70 mm Višina min./maks. 8 / 42 mm Dolžina min. 160 mm (robovi v trakovih) Dolžina min. 60 mm (z role) Hitrost podajanja: 12 m/min Valj za nanašanje lepila Višina delovne površine: 880 mm Stisnjen zrak: 6 bar, 1/4 palca Priključek za odsesavanje: premer 160 mm Dimenzije stroja (D x Š x V): 5600 x 950 x 1300 mm Teža: pribl. 2200 kg Priključna moč: pribl. 11,5 kW, 400 V, 50 Hz Oprema: - Dvojni pritisk z električno nastavitvijo višine - Avtomatski hranilnik za robove z role, do premera 800 mm - Pnevmatične škarje za robove v trakovih, do debeline 3 mm Codpfxehy Tlrj Aqtshb - Avtomatska vodilna letev Predrezalna enota z 2 visokofrekvenčnimi motorji, 1,5 kW, 12.000 vrt/min Dvojna krožna žaga - 2 visokofrekvenčna motorja, 0,2 kW, 12.000 vrt/min 2 avtomatska položaja = 0 + 3 stopinje Enota za obdelavo robov z 2 visokofrekvenčnimi motorji, 0,7 kW, 12.000 vrt/min Enota za obdelavo ukrivljenih robov - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min Enota za zaokroževanje robov AR2 - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min, dvostopenjska, dotikalna Strgalna plošča Opomba o rabljenih strojih: • Pridržujemo si pravico do sprememb tehničnih podatkov in prodaje. • Navedene cene so cene ob prevzemu na našem lokalu – brezplačno natovarjanje! • Stroj je očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli jamstev. • Kupec ima možnost, da stroj pregleda na našem lokalu. • Posebni dogovori so možni le v pisni obliki. (Na povpraševanja bomo odgovorili le, če boste navedli svoj naslov in telefonsko številko!)

Leto izdelave: 2019, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 19-0088, Breton SPS 300/4T je vodoravni cepilni stroj za cepljenje keramičnih, marmornatih, naravnih in tehničnih kamnitih plošč, trakov ali ploščic. Cjdpfx Aqjvupmwetjhb

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, skupna dolžina: 7.920 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Chodpfxsx Emf Dj Aqteb Special configuration for materials with protective film, such as high gloss and super matt finishes! One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Motorized pressure bridge with top belt drive Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, Holz-Her robna lepilka LUMINA 1380 Multi PUR & EVA lepilo (do 60 mm) + NIR agregat / laserski robovi do 45 mm, kot menjalna postaja Predrezkanje IntelliSet – korekcija orodja fa.s.t. – nastavljanje v prekinitvi iTronic – nadzor pritiska in količine lepila Popolna motorizacija vseh agregatov Multifunkcijsko rezkanje – radij 1,3 mm (2x) in 2 mm (2x) Razpršilne naprave in več... Codpfx Aex E A Dijqtshb Stroj je trenutno obnovljen v tovarni v Voitsbergu, Avstrija. Dostavo, montažo in uvajanje v delo s strojem lahko izvedemo neposredno mi za doplačilo. Stroj se trenutno nahaja v našem skladišču za odpremo v Gratweinu, Avstrija. V primeru neskladja med nemškim in prevedenim besedilom velja izključno nemška verzija. Naše splošne pogoje najdete na naši spletni strani holzher.de/de/agb.

Stanje: rabljeno, Lokacija skladišča: Sonnefeld Chsdpfx Aqeway Dcetsb

Stanje: rabljeno, Leto izdelave: 2001, Hrúbka hrany: 0,2 - 6 mm Rozmery obrobku: - Minimálna šírka: 70 mm - Minimálna/maximálna výška: 8 / 42 mm - Minimálna dĺžka pri pásových hranách: 150 mm Posuvná rýchlosť: 12 m/min Valec na nanášanie lepidla Rozmery stroja (d x š x v): 3500 x 900 - 1300 x 1250 mm Hmotnosť: cca 1130 kg Prípojný výkon: cca 6,0 kW, 400 V, 50 Hz Vybavenie: - Dvojité horné pritláčanie s manuálnym nastavením výšky - Automatický zásobník na rolkové hrany do 800 mm priemeru - Rýchloohrevná lepiaca vaňa s nanášacím valcom v súhlasnom aj protibežnom smere - Pneumatické zapínanie a vypínanie všetkých pracovných jednotiek Chjdpfxsvvkfqo Aqteb - Pneumatické kapovacie nožnice pre pásové hrany do 3 mm - Manuálne nastaviteľné vodiacie pravítko - Dvojitá kapovacia píla s 2 vysokofrekvenčnými motormi, 0,2 kW, 12 000 ot./min, 2 automatické pozície (0° + 3°) - Orezávacia/zrovnávacia frézovacia jednotka s 2 vysokofrekvenčnými motormi, 0,43 kW, 12 000 ot./min, obojstranné snímanie, s 2 vysokofrekvenčnými hlavami s otočnými nožmi - Rádiusová stieracia čepeľ, automatické podávanie - Plochá stieracia čepeľ, automatické podávanie Miesto skladovania: Nattheim

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveyor technology year: 2022 Serial number: 141-8300 Features: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holding devices) Chodswlfdxjpfx Aqtjb • Log lifting preparation with frame • 4 height adjustment claws (+2 holding devices) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Operator seat mounted on armrests • PLC controls on the left - joystick on the right • 1 Zenz sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication with 20l tank and nozzle o Mounted on blade guide • Log lifting device o With 3 lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Hydraulic ejector for frame 820mm • Horizontal green laser indicator Mechanization consisting of: • Hydraulic folding frame for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously • 4m long roller table – slightly inclined with end stop o All electrical and hydraulic elements are operated from the operator’s station The block bandsaw including conveyor technology is fully operational.

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Codpfx Aqogmn H Aetohb

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, Cedsv Sv Enjpfx Aqtjhb feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Leto izdelave: 2007, stanje: rabljeno, Stroj za nanašanje zaščitnih ovojnic Müller Martini Vesta (A710) Leto izdelave: 2007 Opis: - Transportni trak - Avtomatski podajalnik zaščitnih ovojnic - Postaja za vtiskovanje - Postaja za odpiranje knjižnih blokov - Postaja za ločevanje platnic - Postaja za zapiranje platnic Chjdpfx Aezxztyeqteb - Sistem za ravnanje s knjižnimi bloki - Naprava za polaganje: A 440 NE - Brez črpalke

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) Codpfoi Am U Djx Aqtehb

Stanje: novo, Leto izdelave: 2026, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Codpohqadcofx Aqtjhb Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2026, Hebrock K 36 Top – vrhunska oprema z motornim nastavljanjem – nova naprava. Ta priljubljena naprava Hebrock ponuja nešteto možnosti. Zasnovana za najvišje zahteve, model K 36 zagotavlja absolutno zanesljivost in produktivnost pri vsakodnevni uporabi. S tem, da lahko napravo opremimo s stopničastim rezalom in večradijskim rezilom, Hebrock postavlja nove standarde na področju popolne obdelave robov različnih debelin. maks. debelina roba: 3 mm maks. debelina obdelovanca: 60 mm delovna pripravljenost v 6 minutah. Maks. debelina roba: 3 mm Min./maks. debelina obdelovanca: 8 – 60 mm Min. dolžina obdelovanca: pribl. 140 mm Hitrost podajanja: pribl. 15 m/min. Delovna pripravljenost: pribl. 6 min. Maks. poraba moči: pribl. 7,4 kW Električni priključek: 400 V – 3 faze – 50 Hz Višina delovne mize: pribl. 900 mm Dimenzije stroja: pribl. 5250 x 1230 x 1430 mm (DxŠxV) Teža: 1750 kg Oprema: Hebrock K 36 - 15 m/min Stroj za obdelavo robov K36 S krmilnikom PLC (vključno s 15-palčnim zaslonom na dotik), nanašanje taljenega lepila na obdelovanec za robne materiale do 3 mm; rezalnik za faziranje (vključno z diamantnim orodjem) do 3 mm globine reza, vzdrževalno nezahteven, prevlečen posode za lepilo z možnostjo zamenjave posode, vključno z napravo za odvajanje lepila, dvojna motorna krožna žaga (pribl. 12000 vrt/min), HF-rezalna postaja (pribl. 12000 vrt/min) s pnevmatskim nastavljanjem reza in zamenljivim rezalnikom (kombinirana izvedba), rezalnik za zaobljanje vogalov, večradijsko rezilo, ravno rezilo (vključno s pnevmatskim mehanizmom za odvajanje), čistilna postaja, robusten verižni pogon, dvojni valji z ležaji za pritisk, okno za pregled agregata z zadnje strani stroja in strani upravljalca, signalna lučka za nadzor obdelovancev, izvlečna opora za obdelovance, hitrost podajanja pribl. 15 m/min, obdelava robov do 60 mm debeline obdelovanca. 36/08/1 Hitra možnost zamenjave rezalnika za obdelavo vogalov 36/08/2/1 dodatni zamenljivi motor za rezalnik za obdelavo vogalov, R=1 36/09/1 Večradijsko rezilo 36/24/1 Naprava za nanašanje ločilnega sredstva 36/24/2 Naprava za nanašanje čistilnega sredstva 36/25 Ščit za nanašanje na rob 36/27 Razporeditev (1 rezalna postaja + 1 večradijsko rezilo) 36/30 Pnevmatski 3-točkovni sistem za nastavitev 36/30/1 Večnamensko orodje za HF-rezalno postajo (R2/R1/faziranje) 36/45 Paket osi za motorni sistem za nastavitev debeline plošč in robov ter globine reza za faziranje Cedpfx Aji Am Ukoqtjhb Lokacija: na zalogi, 54634 Bitburg na voljo po dogovoru.

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) Cjdpelht Hzjfx Aqtohb

Stanje: novo, Leto izdelave: 2026, Hebrock F 5 Če želite maksimalno učinkovitost, je Hebrock F 5 rešitev za obdelavo robov v zahtevnem obrtnem podjetju. F 5 zagotavlja obdelavo robov v vseh korakih, saj je opremljen z vsemi komponentami, ki jih potrebujete za vaše zahteve: strojna freza za utore, krožna žaga, frezalna glava, večradijna strgalna rezila, kotna freza, ploščata strgalna rezila, postaja za čiščenje. Za še večjo prilagodljivost na poti do popolnega zaključka je mogoče F 5 dodatno opremiti s praktičnimi večradijskimi strgalnimi rezili. maks. debelina roba: 3 mm maks. debelina obdelovanca: 50 mm Pripravljen za uporabo v 3,5 min Oprema: Codolht Hwopfx Aqtohb Hebrock F5 Next - 10 m/min Stroj za obdelavo robov F5 Next S krmiljenjem PLC (vključno s zaslonom na dotik) in s sistemom za nanašanje taljenega lepila na obdelovanec za robne materiale do 3 mm; strojna freza za utore (vključno z diamantnim orodjem) do 2 mm globine reza, brez vzdrževanja rezervoar za lepilo s pripravljenim sistemom za menjavo rezervoarja, vključno z napravo za izlivanje lepila, visokofrekvenčna krožna žaga (približno 12000 vrt/min), visokofrekvenčna frezalna postaja (približno 12000 vrt/min) z ločeno pnevmatsko nastavitvijo freze in frezo z menjalnimi ploščami (kombinirana izvedba), kotna freza, večradijsko strgalno rezilo, ploščato strgalno rezilo (vključno s pnevmatskim sistemom za dvig), postaja za čiščenje, robusten verižni pogon, dvojni valjčni zgornji pritisk z krogličnimi ležaji, okno za pregled na hrbtni strani stroja, izvlečni podstavek za obdelovanec, napredovanje približno 10 m/min. Hebrock F5 F5/08/4 Priprava za hitro menjavo kotne freze F5/08/5 dodatni menjalni motor za kotno frezo z orodjem F5/09/4 Večradijsko strgalno rezilo (R1/R2) F5/10 Podvozje F5/14 Dodatni menjalni rezervoar F5/24/1 Razpršilna naprava za ločilno sredstvo F5/24/2 Razpršilna naprava za čistilno sredstvo F5/25 Razpršilna naprava za obdelavo roba F5/27 Držalo za frezo in večradijsko strgalno rezilo F6/28 Razpršilno nanašanje za teksturno obdelavo F5/30 Pnevmatska 3-točkovna nastavitev (freza za robove, faze in izravnavanje) F5/31 Spajanje do 50 mm F5/32 LED osvelitev Lokacija: Na zalogi, 54634 Bitburg - na voljo takoj -

Stanje: novo, Leto izdelave: 2026, Hebrock F 5 Če želite maksimalno zmogljivost, je Hebrock F 5 rešitev za obdelavo robov v zahtevnih delavnicah. F 5 zagotavlja obdelavo robov v vseh korakih, saj je opremljen z vsemi komponentami, ki jih potrebujete za vaše zahteve: rezalnik za utore, krožna žaga, rezalna glava, večradijna glava za obdelavo robov, rezalnik za vogale, ravna glava za obdelavo robov, postaja za čiščenje. Za še večjo prilagodljivost na poti do popolnega zaključka lahko F 5 po želji opremite s praktično večradijno glavo za obdelavo robov. maks. debelina roba: 3 mm maks. debelina obdelovanca: 50 mm Pripravljen za delo v 3,5 min Oprema: Hebrock F5 Next - 10 m/min Stroj za obdelavo robov F5 Next Z nadzorno enoto PLC (vključno s zaslonom na dotik) in z dovajanjem taljenega lepila na obdelovanec za robne materiale do 3 mm; rezalnik za utore (vključno z diamantnim orodjem) do 2 mm globine reza, vzdrževalno nezahteven rezervoar za lepilo z možnostjo namestitve dodatnega rezervoarja, vključno z napravo za doziranje lepila, postaja za krožno žago (približno 12.000 vrt/min), postaja za rezanje (približno 12.000 vrt/min) z ločeno pnevmatsko nastavitvijo reza in menjalnim rezalnikom (kombinirana izvedba), rezalnik za zaobljanje vogalov, večradijna glava za obdelavo robov, ravna glava za obdelavo robov (vključno s pnevmatskim sistemom za izpihovanje), postaja za čiščenje, robusten verižni pogon, dvojni valjčni pritisk z ležaji, pregledno okno na hrbtni strani stroja, izvlečna podpora za obdelovance, napredovanje približno 10 m/min. Hebrock F5 Codpfx Aqoi Anadstohb F5/08/4 hitra možnost zamenjave rezalnika za vogale F5/08/5 dodatni menjalni motor za rezalnik za vogale z orodjem F5/09/4 večradijna glava za obdelavo robov (R1/R2) F5/10 podvozje F5/14 dodatni menjalni rezervoar F5/24/1 naprava za škropljenje ločilnega sredstva F5/24/2 naprava za škropljenje čistilnega sredstva F5/25 naprava za škropljenje roba F5/27 nastavitev za rezalnik in večradijno glavo za obdelavo robov F6/28 škropljenje teksture F5/30 pnevmatska 3-točkovna nastavitev (obdelava robov z različnimi radii, fazami in ravno) F5/31 spajanje do 50 mm F5/32 LED-osvetlitev Lokacija: Na zalogi, 54634 Bitburg Takoj na voljo – na zalogi.