Imac Pullmac Oblikovalec Zvarnih Robov nakup rabljenega (1.373)

Stanje: rabljeno, Beveling Machine INDUMASCH SIEGEN Type V 12 Machine No.: 50674 Year of manufacture: 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min Motor power 2 kW Power supply 400 Volt, 50 Hz - Forward / reverse feed - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions (L x W x H): 650 x 600 x 650 mm Weight: 75 kg Good condition Dujdpfx Aerz Tupebtju

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oblikovalec varilnih robov - Italija Dujdpfey Nkbwsx Abtsu

Stanje: dober (rabljeno), Leto izdelave: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year of manufacture: 2014 Specifications Metric US Standard There are (currently) no specifications available for this machine. Dimensions (Approximate) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Dedpfswq Hqkox Abteuu Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment Dedporx S Ipefx Abtjuu with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics.

Stanje: rabljeno, Edge Beveling Machine, Chamfering Machine, Beveling Machine TRUMPF Beveling of steel plates for weld seam preparation Model: TKF 103 Sheet thickness: 4 - 25 mm Max. bevel length: 10 mm Bevel angle: 30° Power: 2000 Watts Djdjdz Sq Espfx Abtjuu Power supply: 220 Volts, 50 Hz - Equipped with guide bow for 30° bevel angle - Re-grindable insert for high tool utilization - Set up for 20 mm sheet For beveling straight and curved edges with a minimum radius of 40 mm. For beveling the edges of flat and curved workpieces, as well as pipes with an inner diameter of at least 80 mm. Weight: 14 kg

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge milling machine, manufacturer: IMAC Year of manufacture: 1998 Dsdpfxjy A Hnms Abteuu Model: CB 18 Series: B20

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 75 mm,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, številka stroja/vozila: 974/1-810, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.483 h, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, model krmilnika: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Joint Milling Unit 1802 Motor power: 2 x 2.0 kW 1st Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for joint milling unit 2nd Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for joint milling unit Edge Feed 1901 SYNCHRO (fully automatic) Glue Application Station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Magazine for 14 cartridges (1.4 kg) GluJet Collection Container Pressure Section 1913 MOT End Trimming Unit 1918 (60 mm) pneumatic Multi-Function Milling Unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System Cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm left-hand rotation Air Stream System Cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm right-hand rotation Profile Milling Unit 1833 MOT4 1st Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraper Unit 1929 MOT4 HW reversible knives for scraper holder R = 2 mm (2 pcs. required) Flat Scraper FK 701 Buffing Unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spraying Device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Max. edge height: 65 mm Edge thickness (roll material): 0.4 - 3 mm Edge thickness (strip material) max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed fence length: 1,350 mm Electrics for stepless feed: 400 V / 50 Hz Feed drive motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - vertical feeler shoe, top & bottom Edition 18 package ECO MODE energy saving mode ITronic system Dodpfxey Tw Eds Abtsuu

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 0-200-03-9040, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 20 mm, hitrost pomika os X: 18 m/min, leto zadnje generalne obnove: 2025, Stroj je bil 10. 11. 2025 popolnoma generalno obnovljen in opremljen z dvema novima lepilnima posodama. Stroj je bil letno vzdrževan – leta 2023 sta bila programska oprema in računalniški sistem popolnoma zamenjana. Stroj je opremljen z naslednjimi agregati: Enota za spajanje/predispor Tlačna cona Odkapni agregat (HL) Rezkalni agregat (MFL) Profilni izvlečni agregat (PN) Polirna enota (SM) Lepilni sistem FE-MA-TECH Advanced PUR 2 kg TEHNIČNE PODROBNOSTI Podajalna hitrost: 18 m/min Debelina plošče: 10 - 60 mm Debelina robnega traku: 0,3 - 20 mm PODROBNOSTI O STROJU Djdpfxjzap H Ss Abtouu Lepilni sistem: FE-MA-TECH Advanced PUR 2 kg

Stanje: rabljeno, OTT Tornado - TOP Commande via écran tactile couleur 15 pouces pour une automatisation complète et un confort d'utilisation optimal Système de collage CM-CombiMelt adapté au traitement des colles thermofusibles EVA et PUR ainsi que de tous les granulés de nettoyage courants Unité d'assemblage pour le plaquage de panneaux de particules Magasin automatique pour rouleaux Magasin automatique pour bandes de chant Unité de coupe double avec pivotement automatique 0° / 3° Unité d'affleurage - pour affleurage jusqu'à 12 mm Dedpfxjzcm Dye Abtouu Fraise de finition RADIUS - profilage en rayon avec couteaux de profil R2 - R5 Copiage/mise en forme automatique des coins Unité grattoir pour rayon/chamfrein Unité grattoir pour surfaces planes Appareil de pulvérisation de lubrifiant - PU Kit de nettoyage avec unité de polissage fin Support de pièce très stable avec convoyeurs à rouleaux - AVANT avec extension à ciseaux Jeu complet d'outils inclus Machine en ÉTAT EXTRÊMEMENT BIEN ENTRETENU Provenance atelier artisanal Peu d'heures de fonctionnement Disponible en stock à Lieboch

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Grosor de canto: 0,4 - 6 mm Duedpszcau Ejfx Abtou Control moderno con interruptor selector para ajustar los agregados Revista de cantos totalmente automática para material en rollo y tiras Estación de encolado GLU-JET para cartuchos y encolado PU Aplicación de adhesivo mediante tecnología de boquillas Boquilla de seguimiento Altura de la pieza de trabajo: 6-60 mm Ajuste automático de la altura del adhesivo Unidad de presión de 3 rodillos de alta calidad, 1er rodillo motorizado Unidad de corte transversal neumática para material en rollo y tiras hasta 6 mm de grosor de canto Con ajuste neumático de inclinación de 0-10° para sierras de corte Unidad de fresado: fresado a ras 6 mm, fresado de radios – fresado de biseles – 15° Unidad de copiado de esquinas: grosor de canto 3 mm Unidad de rascado para biseles y radios con dos portacuchillas Unidad de rascado plano – acabado Unidad de pulido Sistema de pulverización en área de entrada y salida, así como para PU Máquina con todas las herramientas de procesamiento Máquina REVISADA EN TALLER De taller artesanal Primera entrega 2019 Disponible en stock Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, PROFILATRICE COMAL PRD 12 Avtomatski robilnik za obrezovanje trakov. Uporablja se za pripravo robov trakov pred nadaljnjim valjanjem. Duodpfx Abjxdr Swjtou Stroj je opremljen z nizom valjev, ki omogočajo kontinuirano hladno profiliranje trakov in pločevine do željenega profila ali cevi. Stroj je bil zelo malo uporabljen, popolnoma delujoč in v dobrem splošnem stanju. Na voljo sta originalni priročnik in dokumentacija.

Stanje: rabljeno, številka stroja/vozila: 008522, Pozicija 1: Robot HOMAG + KUKA-KFL10 + KR Pozicija 2: Enostranski robni lepilni stroj HOMAG + KUKA-KFL10 + KR Pozicija 3: Robot HOMAG + KUKA-KFL10 + KR Dujdpfsy Nx U Eox Abtju Pozicija 4: Povrat plošč HOMAG + KUKA-KFL10 + KR

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. Dujdpfjy Emw Hex Abteu • Special agreements are only valid in written form. (We will respond to enquiries only if you provide your address and telephone number!)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Stroj je nov, zapakiran in pripravljen za transport v skladišču prodajalca na Hrvaškem! OLIMPIC k 560 sestava "T-ER2" (40) - Evropski varnostni predpisi (CE norme) - Elektronsko upravljanje "StarTouch" z 12" zaslonom na dotik 100 delovnih programov z možnostjo prilagoditve - Enota za predrezovanje "RT-V1" - Enota za lepljenje "VC-VM" (Inštalirana moč: 3 kW, čas segrevanja: 12 min, kapaciteta lepilnega lonca: 1,5 kg) - "SGP" - pameten lonček za lepilo - Enota za odrezovanje koncev "K/SEL" (Moč motorja: 0,35 kW, hitrost orodij: 12.000 obr/min) - Enota za frezanje "R-K" (Moč motorja: 0,55 kW, hitrost rezil: 12.000 obr/min, previs materiala glede na debelino panela: 2+2 mm, min. debelina panela z radijem: 12 mm, vertikalne/čelne kopirne naprave: disk / blazinica, radij orodja: 2 mm) - Enota za zaokroževanje "ROUND X" (Moč motorja: 0,35 kW, hitrost rezil: 12.000 obr/min, debelina robnega traku: 0,4–3 mm, debelina panela pri pravem kotu: 10–50 mm, debelina panela pri profiliranem kotu: 10–30/40 mm, radij orodja: 2 mm) - Enota za strganje roba "RAS-HP MULTIEDGE 2R" - Kopirna naprava "Nesting" TEHNIČNI PODATKI Dsdeza U H Ropfx Abtjuu Spremenljiva hitrost pomika tračnice: 12–18 m/min Debelina panela: 8–60 mm Debelina robnega traku v trakih: 0,4–6 mm Debelina robnega traku v roli: 0,4–3 mm Največji prerez robnega traku v roli: 135 mm² Razdalja med dvema zaporednima paneloma: 600 mm Minimalna dolžina panela (min. širina 100 mm): 140 mm Minimalna dolžina robnega traku v roli: 180 mm Minimalna dolžina robnega traku v trakih: 220 mm Minimalna širina panela (min. dolžina 210 mm): 95 mm Odpiranje za podporni valj panela: 500 mm Višina delovne mize: 900 mm DIMENZIJE STROJA (za transport): dolžina: 5.005 mm širina: 1.000 mm višina: 1.950 mm

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via parallelogram linkage Both jointer tables are equipped with noise-dampening table lips Precision ball-bearing cutter block with reversible knives Thicknessing table with central column guide and support Adjustable helical infeed roller for optimal planing results Technical data: Jointing width: 410 mm Table length: 1800 mm Table height: 850 mm Cutter block speed: 4,500 rpm 4-knife cutter block Cutter block diameter: 100 mm Jointer fence tiltable: 90 - 45° Dodpfxowzzyuo Abtouu Max. depth of cut: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Clearance min./max.: 3 - 225 mm Max. depth of cut: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space requirement: 1800 x 850 mm Availability: short-term Location: Röllbach

Stanje: rabljeno, Holz Her UNO 1303 + PU Dusdpfxjy Tuyls Abtju Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Samodejni robni magazin za rolo in trak Postaja za nanašanje lepila: patroni + PU lepljenje Obdelovalna višina 6-55 mm Pnevmatski pritiskalni agregat Kapp agregat za rolo in trak do 3 mm (6 mm) debeline Z možnostjo nastavitve kota kappa žag od 0-10° Rezkalni agregat, rezkanje v ravnino, radij rezkanje, posnetje - 15° Vlečno rezkalo za posnetje in radije Končni vlečni rezkalni agregat Stroj je PREVERJEN in v ODLIČNEM STANJU iz zelo vzdrževane obrtne delavnice Stroj je priključen v razstavnem centru in pripravljen za predstavitev Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, številka stroja/vozila: AH/005553, Funkcionalnost: popolnoma funkcionalen, SCM Stefani Solution HD Edgebander Heavy-duty industrial edgebanding machine for high-capacity production. Main Specifications: • Panel thickness: max 60 mm • Edge thickness: 0.4 - 3 mm (Solid wood up to [12] mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] • Working Units (Configuration): • Pre-milling unit • Gluing unit with pressure rollers Dusdpfx Aboy Uxxhoteu • End-trimming unit • Top/Bottom trimming unit (rough & fine) • Corner rounding unit • Radius edge scraper • Glue scraper • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing under power.

Stanje: rabljeno, Leto izdelave: 2000, Širina skobljanja: 410 mm, dovajalna miza: 1620 mm, izhodna miza: 1170 mm, skupna dolžina: 2850 mm, motor: 4 kW, hitrost: 5000 1/min. Potreben prostor: 2950 x 1260 mm. Teža: cca 850 kg. Lokacija: Dobavitelj. Djdpfx Abjzb N Tzjtjuu

Stanje: rabljeno, skupna višina: 1.600 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna masa: 440 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Obrezovalna enota: da Vodila za podporo plošč: da Število enot za obdelavo robov: 1 Obdelovalna enota: grobo obrezovanje zgoraj in spodaj Število zaključnih motorjev: 1 Dusdpfxey Uwq As Abtou PODROBNOSTI O STROJU Model: UF 362 / 2713 Tip: Ročni brusilni stroj OPREMA Obrezovalna enota Vodila za podporo plošč

Leto izdelave: 2020, obratovalne ure: 4.450 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, COMANDULLI Model OMEGA 60 SX • Belt direction: LEFT to RIGHT, overhauled in 2020 #06701 • Thickness reduction & profile milling support, tiltable at 45 degrees, manual height and lateral adjustment • 1 top / 1 bottom milling support • 6 edge polishing heads D=130 mm on double pendulum joint • 1 pneumatic lower chamfer / 1 upper chamfer support • Water drip groove milling support, manual height and lateral adjustment Dusdpfxozb H U Ae Abtsu • Separate control panel on swivel arm • Table extension console • Water tray • Required space approx.: 620 x 200 cm • Infeed and outfeed conveyor each 200 cm The machine can be inspected in operation by appointment. Current pictures and videos from last week. Price details • EXW from machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not part of the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for dispatch Warranty • Machine is sold as is, excluding any warranty claims Inspection possibility • In operation near Hanover Availability • After delivery of the new machine, approx. November 2026

Stanje: dober (rabljeno), Leto izdelave: 2011, Single-sided edge banding machine, right-hand version, with workpiece return system for hot-melt glue and/or PU gluing, used, year of manufacture 2011; approx. 8,700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Min. width: 70 mm, Min. height: 8 mm, Max. height: 60 mm, Min. length: 150 mm Feed speed: 14 – 20 m/min, infinitely variable Glue application: Glue application roller with Vario-melt dosing automation Working height: 900 mm Machine dimensions: Height: 1,600 mm, Width: 1,100 mm, Dodpfxozb Iuqs Abtjuu Length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: - Double pressure roller unit with electronic positioning - Pneumatic control of all units from the central touch-screen panel via Beckhoff industrial PC - CM – CombiMelt gluing system: Processing units: - Fk – Jointing unit for edge processing of particle boards with 2 HF motors 2.2 kW, 200 Hz, 12,000 rpm, working in both directions, path controlled. Tool: DIA jointing cutter set Ø 85 x 45 x 30, z=3, for panel thickness up to 42 mm - AKM – Edge magazine for automatic feeding of strip edges, with spiked roller feed and pneumatic pressure beam. Including optical edge monitoring - M4+1 – Fourfold magazine Automatic roll retraction. Holds four edge rolls. With variable edge chute for quick edge changes. With automatic selection menu. - K 13 – DOUBLE END TRIM UNIT with 2 HF-motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically tiltable 0/5° - K 160 – 2 HM SAW BLADES 140 x 3.2 x 16 mm, Z 36 - Bfc – FLUSH MILLING UNIT for pre-milling of applied edges, operating against feed direction. Single-sided sensing, adjustment via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, z 4 (HF70). - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, Z 4 (HF70), optionally also equipped with radius tools - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide radius reversible planer heads (AR 73), Ø 73 x 16 x 16, z 3 for R1 – R3 inserts. - AKF – AUTOMATIC CONTOUR TRIMMING with two separate work spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm Tool: 2 PCD diamond radius cutters Ø 73 x 13 x Ø 16 With integrated dust extraction. - AZK 4 – automatic SCRAPER CHANGER UNIT - ZKf – SURFACE SCRAPER UNIT with fine-sensing device for residual hot-melt glue removal on the joint area – with extraction. Additional equipment: - AS – Antistatic spray unit, double, on the glue joint - GS – Glide spray unit for applying antistatic lubricant to the edge surface, electronically controlled - RS – Cleaning set with 4-fold spray unit and fine buffing device for surface cleaning - KEO-c – EDGE POLISHING UNIT, oscillating and automatic feed. 2 motors 0.2 kW, with 2 cloth wheels - WE – Angle infeed aid as folding pusher slide, for narrow parts. Interface for workpiece return system Ligmatech ZHR 05 or equivalent

Stanje: rabljeno, Holz Her Perfect 1422 K + PU Dujdpjy Rm Iisfx Abtju težka izvedba do 20 mm debeline robnega traku popolnoma avtomatski zalogovnik za role - čelilne škarje popolnoma avtomatski zalogovnik za robne trakove v traku lepilna postaja za kartuše + PU rezanje v liniji večnamenski rezkalni agregat: rezkanje v liniji, posnemanje robov, radijsko rezkanje z mehansko digitalno nastavitvijo zvočno izolirana kabina CE izvedba Stroj je FUNKCIJSKO PREVERJEN in v ZELO DOBREM STANJU na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Control system with 15" touchscreen Djdpfx Aey U R Izsbteuu - Jointing milling unit with 2 milling heads - Edge feed - Glue application system GluJet 301: 2.3 kW, automatic glue height adjustment, tracing nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond milling cutters left & right: with CM technology - Corner copying unit with diamond cutters - Surface scraper blade - Buffing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multi-function milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spraying device for infeed and outfeed areas - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, številka stroja/vozila: 007818, Vrsta pritrjene obloge: tanka obloga, močna obloga Sistem lepljenja: EVA Multifunkcijska enota: da Stroj za lepljenje robov: stroj 1 in 2 Maks. širina panela: 3000 mm Maks. podajalna hitrost: 40 m/min Dujdpswu Ab Tefx Abtou Delovne enote, desna stran: 12 kos Delovne enote, leva stran: 12 kos