Stroj za oblaganje robov

HOLZ-HER Sprint 1329 Black Edition

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Lodjx S Hmzopfx Ahushh Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, številka stroja/vozila: 008125, Tip nalepljenega roba: tanek rob, debel rob Leplilni sistem: EVA, vroči zrak Priprava za lepljenje spojev: da Večnamenski agregat: da Lhodsw Tivmjpfx Ahujh Maks. hitrost pomika: 18 m/min Delovni agregati: 7 kosov

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment Lhsdpjvxlq Hofx Ahuoh used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja) Lhsdpfx Ajyywcvohush

Leto izdelave: 1999, stanje: dober (rabljeno), Edge banding machine Biesse Polymac ERGHO 5, year of manufacture 1999 Biesse Italy S/N 80709 Max. panel thickness: 10–45 mm Min. and max. edge band thickness: 13–60 mm Max. edging material thickness (in rolls): 0.4–3 mm Min. panel width: 50 mm Min. panel length: 150 mm Working speed (m/min): 10 / 20 Lhsdpfegtx Aqox Ahueh Technical details: - Glue pot VC 700 - End trimming unit 701 - Edge trimming unit RS 700 - Corner rounding unit CR 200 - Tilting edge trimming unit + beveling RI 700 - Compact edge scraper RBK501 - Buffing units SP700 - Edge sanding unit LV 700 Additional features: - Heated infeed guide - PLC control - Panel support guide - Large-diameter roll holder - Edge shearing device for 3 mm rolled edging 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2900 kg

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Lodpfxsvymdqs Ahuehh Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, dimenzije reza 3800x3800 mm višina reza 95 mm pomik nosilca z oprijemali 90 m/min hitrost reza do 150 m/min, brezstopenjsko nastavljiva moč glavnega motorja 13,5 kW moč predrezalnega motorja 2,2 kW premer žaginega lista 350 mm 4 zračne mize potreba po odsesavanju 3800 m3/h zunanje dimenzije 6500x7700 mm Ljdpfx Ahsylbdtouohh

Stanje: rabljeno, številka stroja/vozila: 008437, Tip nameščene robne letev: tanka letev, močna letev Lhodpfxjyng Agj Ahuoh Lepilni sistem: EVA, PUR Spojno rezkanje: da Multifunkcijska enota: da Maksimalna debelina plošče: 60 mm Delovne enote: 7 št.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Biesse Akron 1330 A Kantenanleimmaschine Einseitige Kantenanleimmaschine AKRON 1330-A Leimauftragseinheit SP03 Kappenaggregat IT03 Feintrimmaggregat RF02 Eckenrundungsaggregat AR02 VORFRÄSAGGREGAT RT02 mit symmetrischen Diamantwerkzeugen H=45 mm Z=2+2 30°, inklusive. KANTENSCHABER RB02 (Werkzeuge nicht enthalten) LEIMSCHABER-EINHEIT RC02 BÜRSTAGGREGAT SZ02 ERGÄNZENDE SEITLICHE WERKSTÜCKUNTERSTÜTZUNG MONTAGEKIT FÜR RÜCKFÜHRUNGSSYSTEM HANDEINSCHUBVORRICHTUNG FÜR SCHMALE TEILE SET ZUR BEARBEITUNG VON "SHADOW LINE"-PROFILPLATTEN GERADER LUFTTISCH AM MASCHINENZUFÜHRBEREICH ANTIHAFTMITTELSYSTEM ADZ02 PAAR DIAMANTIERTE FRÄSER H=65 mm Z=2+2 30°. Zum Austausch der Standardwerkzeuge. HYBRID-LEIMAUFNAHMEEINHEIT FÜR GRANULAT-EVA/PUR-LEIM STATT STANDARD-SYSTEM TM15 HYBRID-VORSCHMELZER FÜR EVA/PUR-LEIM ADAPTIVE INFRAROTLAMPE AdIRL-700 AX-4, NC-ACHSE AM FEINSCHNEIDAGGREGAT PRO-NESTING-KIT FÜR DAS FEINSCHNEIDAGGREGAT Paar Mehrprofilfräser für das Feinschneidaggregat: Fase 25 Grad, R=2 mm + R=1 mm, gerades Profil für Massivholz Lodjyyb Icopfx Ahushh AX-2, NC-ACHSE AM ECKENRUNDUNGSAGGREGAT NUR RUNDFUNKTION SCHIEBEEINHEIT FÜR DAS ECKENRUNDUNGSAGGREGAT Paar Fräser, R=2 mm, für Eckenrundungsaggregat Paar Fräser, R=1 mm, für Eckenrundungsaggregat AX-4, NC-ACHSE AM KANTENSCHABER PRO-NESTING-KIT FÜR DEN KANTENSCHABER Paar Messer R=2 mm, für Kantenschaber Paar Messer R=1 mm, für Kantenschaber REINIGUNGSEINHEIT LPT02 (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: rabljeno, Leto izdelave: 2014, Za povpraševanja: Zoltán Utasi +36 30 205 7380 • motorni pritrdilni most za nastavitev pritiska • Električni sistem za brezstopenjsko podajanje 400 V / 50 Hz, 2,2 kW • "Krmiljenje PPC 221 – z 8,4'' VGA barvnim zaslonom" Visoko zmogljivo krmiljenje z zelo enostavnim upravljanjem • Predrezalna enota za robove 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 min⁻¹) s 2 rezkalnima agregatoma za predrezanje plošče na robu • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, leva rotacija Za predrezalno enoto 1801 / 1802 • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, desna rotacija Za predrezalno enoto 1801 / 1802 • Polnilna enota za robni trak 1903 SYNCHRO avtomatski transport kolutov in materiala v trakih • Enota za nanos lepila Glu Jet GJ301 avtomatska (2,3 kW, 50 Hz) • Pripravna enota za lepljenje 1913 pnevmatska prvi valj poganjan, 2 dodatna pritisna valja z individualnim pnevmatskim upravljanjem • Odrezna enota 1918 (60 mm) pnevmatska (2 x 0,45 kW, 12.000 min⁻¹), pnevmatsko vrtljiva 0/10° • Multifunkcijska rezkalna enota 1827 pnevmatska (2 x 0,65 kW, 200 Hz, 12.000 min⁻¹) • Vertikalni sledilni valji ročno ročna nastavitev vertikalnega sledilnega valja po 0,1 mm za rezkanje previsa roba, npr. za plastične robove • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, leva rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, desna rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Kotna kopirna enota 1832 (1 x 0,35 kW, 200 Hz, 12.000 min⁻¹), za debelino roba do 3 mm • Rezkar, diamantni Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, s CM tehnologijo (LEUCO sistem) in integriranim odsesavanjem ostružkov za profilirno enoto 1832 • Strgalo 1929 pnevmatsko vključno s pnevmatsko nastavitvijo (ločen za zgoraj in spodaj) • HW obojestranska rezila za nosilec strgala 1929 / 1927 R = 2,0 mm (potrebni 2 kosa) • Ravno strgalo 1964 Odstranjevanje ostankov lepila za čist lepljen spoj. • Polirna enota 1940 (2 x 0,12 kW, 50 Hz, 1400 min⁻¹) Za končno čiščenje in poliranje robov. Z 2 tekstilnima diskoma, vrtljiva od 0–5° Lodpfxsx Huhcs Ahujhh