Ima Guk Kartonski Voziček nakup rabljenega (9.661)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging output: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Psdpev Suhbsfx Altopw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, Na voljo je integriran embalažni sistem Soco, ki ga sestavljata avtomatski postavljalec kartonov in lepilni stroj za zapiranje kartonov. 1) Dno zapiralni stroj Soco F-100P, minimalna širina kartona: 320 mm, maksimalna širina: 520 mm, največja dolžina: 900 mm, dimenzije stroja X/Y: cca. 750 mm/1150 mm. 2) Stroj za zapiranje kartonov Soco T-402 5-5-7, območje dolžine kartona: 200 mm-750 mm, območje širine: 120 mm-460 mm, območje višine: 95 mm-470 mm, zmogljivost zapiranja: 18/min, največji premer koluta lepilnega traku: 385 mm, teža: cca. 200 kg. Vključuje varnostno zaščito, valjčno progo in transportno enoto. Sistem je skoraj nov in je v uporabi šele od januarja 2026. Dokumentacija je priložena. Ogled na lokaciji je možen. Pjdoy Hk Tnepfx Altopw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Na voljo je stroj Uhlmann za kartonsko pakiranje blistrov, vključno s prepogibnim strojem GUK. 1) Kartonažer Uhlmann C100, leto izdelave: 1989, maksimalna kapaciteta pakiranja: cca. 100/min, minimalna velikost zloženega kartona X/Y/Z: 30mm/15mm/70mm, maksimalna velikost X/Y/Z: 100mm/85mm/150mm, dimenzije stroja X/Y/Z: cca. 3000mm/1500mm/1800mm, teža: cca. 1500kg. 2) Prepogibni stroj GUK FA 21/4 Cartonac, število prepogibnih žepov: 4, vhodna širina: 210mm, zmogljivost: 300 prepogibov/min, minimalni format X/Y: 90mm/90mm, maksimalni format X/Y: 210mm/320mm, razpon gramature papirja: 30g/m²-180g/m², dimenzije stroja X/Y/Z: cca. 800mm/700mm/400mm, teža: cca. 80kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Ppedpfey Equaox Altsw

Stanje: novo, Leto izdelave: 2025, Fully automatic case erector for an efficient and cost-effective packaging process. Cartons are automatically taken from the magazine, erected, and sealed from the bottom (one direction). The erected boxes are then conveyed out onto a transport belt and collected for filling. Ppjdpfxsv Nkvpo Altjw Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(250-450)xW(150-400)xH(100-400); Max. machine cycle rate (idle): 12 cycles/minute; Power supply: 110/220V, 0.3kW; Compressed air: 5-6 bar, 0.4 m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2300xW1900xH1700mm; Weight: 650kg. Please note that our new equipment prices are often lower than typical used machinery prices. Feel free to contact us and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic high-speed case erector for an efficient, fast, and thus economical packaging process. The cartons are automatically taken from the magazine, erected, and sealed from the bottom (in one direction). The side-positioned cartons are then discharged for collection. - Specifications: PLC controlled, operation via touch monitor; Carton size in mm: L(130-280)xW(80-200)xH(80-200); maximum machine cycle rate (idle): 20 cycles/minute; magazine capacity: H = 600mm; Power supply: 110/220V, 1kW; compressed air: 5-8 bar, 0.3m³/min; tape width in mm: 36/48; machine dimensions: L1680xW1210xH1260mm; weight: 700kg. Ppodpfxev Nkvve Altsw Please note that our new machine prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we can offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic case erector for an efficient and economical packaging process. Cartons are automatically picked from the magazine, erected, and sealed from the bottom (single direction). The erected boxes are then conveyed onto a transport belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(350-650)xW(150-500)xH(100-500); max. machine cycle rate (idle): 9 cycles/minute; Power supply: 110/220V, 0.3kW; Air supply: 5-6 bar, 0.4m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2200xW1900xH1450mm; Weight: 530kg. Ppsdpfx Aev Nkvieltew Please note that our prices for new machines are often below average used equipment prices. Feel free to contact us with your packaging requirements. - Usually, 30-50 different new machines are available for immediate delivery from stock. For custom-built equipment, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Pjdpowmm Nrofx Altopw

Stanje: rabljeno, številka stroja/vozila: 008660, Vrsta obdelanega roba: tanek rob, debeel rob Lepilni sistem: EVA Obdelava s frezo: da Ppsdpfxezmmt Uj Altsw Multifunkcijska enota: da Enota za obdelavo z zgornjo frezo: da Maks. hitrost premika: 30 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos

Stanje: rabljeno, številka stroja/vozila: 008662, Pozicija 1: Enostranska kantna strojna linija IMA-NOVIMAT CONTOUR I/G80/790/R3 Pozicija 2: Sistem za vračanje plošč IMA-NOVIMAT CONTOUR I/G80/790/R3 Ppedjzmmtnspfx Altjw

Stanje: rabljeno, Leto izdelave: 2008, moč: 41 kW (55,74 KM), največja debelina roba: 3 mm, model krmilnika: ICOS OPEN, Stroj ima naslednjo konfiguracijo: Predrezalna enota Model proizvajalca: R3 L20 Nadzor vklopa: Samodejni, časovno uravnan Moč motorja: 4 kW Število vrtljajev: 9.000 vrt/min Obdelava robov Število enot za obdelavo robov: 10 Enota za prečno žago Model proizvajalca: 8,42/39/B Število motorjev: 2 Moč motorja: 0,6 kW Število vrtljajev: 12.000 vrt/min Enota za ravnanje in zaokroževanje robov Model proizvajalca: 08.055 Število motorjev: 0,6 (?) Moč motorja: 1 kW Število vrtljajev: 12.000 vrt/min Enota za zaokroževanje kotov Model proizvajalca: 08.342 Število motorjev: 2 Moč motorja: 0,66 kW Število vrtljajev: 12.000 vrt/min Enota s potisno rezilo Model proizvajalca: 08.50 Enota za brušenje s trakom 1 Model proizvajalca: 08.62 Moč motorja: 0,18 kW Ppedpfxjzmtkas Altjw Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 2 Model proizvajalca: 08.062 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 3 Model proizvajalca: 08 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 4 Model proizvajalca: 08.617-2 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 5 Model proizvajalca: 08 Enota za obdelavo 10 Model proizvajalca: 08.190 Moč motorja: 4,5 kW Število vrtljajev: 9.000 vrt/min TEHNIČNE PODROBNOSTI Dimenzije obdelovanca Maks. višina plošče: 60 mm Min. dolžina plošče: 130 mm Min. širina plošče: 65 mm Material robov Min. debelina roba: 0,4 mm Maks. debelina roba: 3 mm Napajanje Maks. hitrost napajanja: 30 m/min Pritisk: Gumijast pas Število enot za obdelavo/rezanje plošče: 1 PODROBNOSTI O STROJU Nadzorni sistem: ICOS OPEN Skupna priključna moč: 41 kW OPREMA Število enot za obdelavo/rezanje plošče: 1 Luči za predgrevanje strani plošče Magazin za robne valje z 2 položaji Talilni grelec za PUR lepil Komplet pritiskalnih valjev z 5 pritiskalnimi valji Brizgalna enota Stroj se prodaja in dobavlja v trenutnem in dejanskem stanju („tako kot je in kjer je“), na podlagi fotodokumentacije in tehnične/komercialne dokumentacije, ki ima opisni značaj. Kupec ima pravico, da pregleda blago pred prevzemom in prevzema odgovornost za namestitev, varno delovanje in uporabo stroja na končni lokaciji. Zunanja referenca: 5657

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, število osi: 3, Ta 3-osna CNC obdelovalna naprava za obdelavo lesa, tipa IMA BIMA 410, je bila izdelana leta 2000. Ima delovno površino 3000 mm v osi X in 1200 mm v osi Y, ter maksimalno višino vpenjanja 100 mm. Stroj je opremljen z avtomatskim osrednjim sistemom za mazanje in AC servo motorji za natančno delovanje. Če iščete visokokakovostno opremo za obdelavo lesa, razmislite o stroju IMA BIMA 410, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Delovna površina X: 3000 mm • Delovna površina Y: 1200 mm • Maks. višina vpenjanja Z1: 100 mm • Maks. debelina obdelovanca Z2: odvisno od opreme/uporabe • Višina mize: pribl. 1000 mm • Nihajni hod X: 2 × 1400 mm • Prostor v sredini X: 200 mm • Alternativni nihajni hod X: 2 × 900 mm • Prostor v sredini (alternativno) X: 1200 mm • Teža stroja: pribl. 6000 kg • Vodilni sistem: natančne linearne vodila, kaljena na pribl. 62 HRC • Osrednje mazanje: avtomatsko za vse glavne osi in krožne vijake • Pogonski sistem: AC servo motorji z enkoderjem • Pogon osi X/Y: zobata letva in zobnik • Pogon osi Z: krožni vijak • Hitrost podajanja: 40 m/min • Hitri hod X/Y: 80 m/min • Hitri hod Z: 25 m/min • Pospešek: 3 m/s² • Priključek za odsesavanje glavne vretenske glave: 300 mm • Priključek za odsesavanje vreten za vrtanje: 120 mm • Hitrost zraka: pribl. 28 m/s • Volumen zraka: pribl. 7080 m³/h • Moč vakuumske črpalke: 100 m³/h • Priključek za stisnjen zrak: 1/2" • Pritisk zraka: 6 bar • Nadzorna napetost: 24 V DC • Priključna moč: pribl. 24 kVA • Napajanje: 3/N/PE 400/230 V 50 Hz • Frekvenčni pretvornik: 0–480 Hz • Temperatura okolice: +15 do +35 °C • Nadzorni sistem: IMATRONIC NT 231 • Interpolacija: linearna na vseh osi, krožna 2,5D • Ločljivost: 0,001 mm Ppodpfx Alsy Aw N Uotsw • Vreteno: HSK F63 • Moč vpenjanja orodja: 11.000 N • Maks. teža orodja: 6 kg • Območje vrtljajev: 1.500–18.000 vrt/min • Moč vretena: 7,5 kW • Hlajenje: z vodo • CNC os: se lahko vrti za 360° • Tip skladišča orodij: menjava plošč • Položaji orodij: 18 • Maks. dolžina orodja: 150 mm • Maks. premer orodja: 100 mm (150 mm pri prostih sosednjih položajih) • Maks. obremenitev: 60 kg • Motor žagane enote: 1,5 kW • Hitrost žaganja: 5600 vrt/min • Premer žaginega lista: maks. 150 mm • Agregat za vrtanje: 14 vreten • Hod vretena: 70 mm • Pogon: 2,2 kW • Hitrost: 3150 vrt/min • Maks. premer vrtanja: 20 mm • Vretena adapterja: 4 • Maks. hitrost: 6000 vrt/min • Maks. premer vrtanja: 12 mm Oprema mize: • 6 nastavljivih opornih rok • 12 sesalnih skodelk 114 × 159 × 100 mm • 6 sesalnih skodelk 125 × 75 × 100 mm • Vakuumska naprava: 2-krožni sistem za vpenjanje • Dimenzije omarice: 2000 × 1800 × 600 mm NAPAKE: • Glavno vreteno ne sprosti zamenljive vrtalne glave.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position Ppodpfx Aswz Ic Ajltew EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control system / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) SIZING UNIT (per side): Sprayer unit (for liquid non-stick agents) Milling unit (2 x 8 kW) EDGE PROCESSING UNIT (per side): Gluing station (hot melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no.): 6 Servo-drive guillotine shear (for cutting the edge material) Pressure zone (CNC-controlled) Premilling unit 08.055 (2 x 1 kW) 0°-30° Profile scraping unit 08.519 Flat scraping unit 08.50 Psdpfx Asyypi Uoltepw Buffing unit 08.617-2 (2 x 0.18 kW) Sprayer units (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°-90° / 180°-270°

Stanje: delavnici obnovljeno (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips/bands (min/max): 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMATTING (for each side): Pjdpoyyya Dofx Altjpw Spraying unit (for liquid anti-adhesive) Jointing milling unit - 08.379 (2 x 4 kW) EDGE PROCESSING (for each side): Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Pressure zone (CNC-controlled) + edge magazine for rolls (No. 6 positions) End trimming unit 08.42/30/B (2 x 0.66 kW) max 30 m/min Milling unit 08.055 (1 x 2 kW) 0°-30° Contour trimming unit (for fine trimming) CNC-controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW)

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows based) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (panels fall directly onto the motorized caterpillar chains) Cam distance (mm): 270 FORMAT PROCESSING (for each side): Spraying unit (for liquid nonstick agent) Pre-milling cutter 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Psdeum Untepfx Altspw Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Consisting of the following machines: A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) Podpoyyb Suofx Altspw F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Ppodpfx Aoxggzleltsw Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Ppodpfxjd Rcige Altsw Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: rabljeno, Poševna valjna miza se uporablja za premoščanje višinskih razlik in vrzeli med stroji. Poleg tega lahko poševno valjno mizo uporabite kot osnovno postajo za cardtipper (z GWG), dispenzer trakova (z GWG), napravo OUE ali za gumiranje. Poševna valjna miza / Inclined Roller Table GUK RT 46 Leto izdelave 1994 - Serijska št. 34088 premična in nastavljiva po višini Spletni video ogled prek WhatsApp - MS Zoom - Telegram Pjdoxnz Tljpfx Altjpw Na zalogi v Emskirchen/Nürnberg - Takoj na voljo - Možnost testiranja

Stanje: rabljeno, številka stroja/vozila: 17021, Antique folding machine - Guk Online video inspection via Skype video We would be very pleased to welcome you - more machines in stock Available immediately - Inspection possible Ppjdpfx Ajh Axatjltjw In stock in Emskirchen / Nuremberg - Test run possible

Stanje: rabljeno, Leto izdelave: 1999, Knife Folding Unit / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Infeed width: min. 150mm - max. 480mm Infeed length: min. 80mm - max. 320mm Infeed height: min. 450mm - max. 650mm Speed: min. 40m/min - max. 160m/min Productivity: 20,000 cycles/h Online video inspection via Skype video We would be pleased to welcome your visit – more machines in stock Available immediately – can be inspected Located in stock in Emskirchen / Nuremberg – test run possible Ppsdpeun Nn Djfx Altsw

Stanje: rabljeno, številka stroja/vozila: 005854, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroji za lepljenje obrob: stroj 1 in 2 Maks. širina panela: 3300 mm Maks. podajalna hitrost: 30 m/min Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 11 kos Ppedpev Hinxsfx Altow

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Ppjdpswukznofx Altsw Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 9: Transfer IMA-COMBIMA SYSTEM I

Stanje: rabljeno, številka stroja/vozila: 008517, Tip nameščenega roba: tanka obloga, močna obloga, masiven les Sistem lepljenja: PUR Spojnično rezkanje: da Multifunkcijska enota: da Maksimalna hitrost podajanja: 20 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 št. Pjdjy T Hpfspfx Altjpw

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pjdowukzhopfx Altjpw Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110