Hydrap Hidravlični Naravnost Dvostranski Tisk nakup rabljenega (8.018)

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 100 tons Frame opening at front: 1400 mm Stroke: 250 mm Side openings: 400 mm Table: 1250 x 1100 mm Ram: 1250 x 1100 mm Stroke: 250 mm Speed: Rapid downwards 400 mm/sec, rapid upwards 330 mm/sec, under load: 24-43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Width: 1,700 mm Codpfxjc Uwx Ds Adierf Depth: 1,800 mm Table ejector: 6 tons Cutting impact damping Pressure, time and stroke dependent control Two-hand operation

Leto izdelave: 1988, stanje: dober (rabljeno), Pressing force: 160 tons Side openings: 600 mm Installation height: 750 mm Cjdpfod Rlm Rex Adiorf Table size: 1400 x 900 mm Ram size: 1400 x 900 mm Speeds: Rapid down: from 400 mm/sec Rapid up: 300 mm/sec Working: 19 - 50 mm/sec Stroke: 400 mm Power requirement: 45 kW Weight: 23 tons Height: 4300 mm Press is floor-mounted Press control: Siemens S5 3 cushion cylinders integrated in the table, insertable

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Punching capacity in sheet metal with 37 kg strength up to: 2 and 3 mm with various punching tools Crjdpfxod D Ryfe Adisf

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SMG HZPU 8000-3000/2100-S1 Hidravlična vlečna stiskalnica Cedpfx Adsn Awd Rjiorf Znamka: SMG Tip: HZPU 8000-3000/2100-S1 Leto: 1995 Opis: Hidravlična vlečna stiskalnica s H-okvirjem Tlačna sila: 800 ton Vpenjalna površina: Pribl. 3.000 x 2.100 mm Vgradna višina: Maks. 1.400 mm

Stanje: dober (rabljeno), Hydraulic press, bending machine, straightening machine, section straightening system, coil straightening machine, coil straightener, shaft straightening system, combined bending-straightening press, section bending machine, flat bar bender, horizontal bending/straightening press, horizontal bending machine - Hydraulic press: straightening system, straightening machine, section straightening system with roller conveyor - Pressing force: 10 tons - Pressure: max. 100 bar - Roller conveyors: 2x 1000/170/H1110 mm / Rollers Ø 56 x 140 mm - Transport dimensions: 1335/1220/H1470 mm Crjdpfxovgu Hae Adisf - Weight: 807 kg

Stanje: rabljeno, Dvojdelujoči hidravlični cilinder MAE primeren za hidravlično stiskalnico MAE tip HY-DSF 160 Prirobnica cilindra, idealen za delavniško stiskalnico Leto izdelave stroja: 1970 Št. cilindra: 6017 Hod cilindra: pribl. 600 mm Delovni tlak: 320 barov Batna palica: Ø 220 mm Premer bata: Ø 250 mm Pritisk cilindra pri 325 bar: pribl. 160 ton Premer cilindra: 255 / 370 / 390 mm Skupna dolžina iztegnjene batne palice: pribl. 1350 mm Izstop palice: 70 mm - Hidravlični priključni navoj G 1 1/2 " - Priključek na prirobnici na dnu cilindra Ø pribl. 118 mm notranje, zunanje Ø 165 mm, 6x M36 navojev, rastrsko 215 mm - Navoj v batni palici M20, rastrsko 160 mm - Pridržna matica na cevki cilindra, zunanji premer 418 mm Lastna teža: 915 kg Hidravlični cilinder je rabljen in izvira iz likvidacije zalog. Crjdpfx Ajy Tptaedijf

Stanje: rabljeno, Leto izdelave: 1986, skupna dolžina: 1.350 mm, skupna širina: 2.550 mm, skupna višina: 2.700 mm, Lastna teža: 7.000 kg - Leto izdelave: 1986 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 5499 - Upravljanje: Konvencionalno - Model stiskalnice: C-okvirna stiskalnica - Tlačna moč [t]: 63 - Največji hod [mm]: 200 - Dolžina mize [mm]: 630 - Širina mize [mm]: 525 - Dolžina drsnika [mm]: 1100 - Moč motorja: 20,0 kW - Transportne mere: 1350mm x 2550mm x 2700mm (d x š x v) - Transportna teža [kg]: 7000kg - Število transportnih paketov [kos]: 3 Crodpfx Aox Ad Hkodief Finančne informacije DDV: Naveden cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, Single-column hydraulic press EXNER Type EEX 20 S Machine No. 1615 Year of manufacture: 1980 Pressing Force: 20 tons Throat Depth: 180 mm Cjdjyz Dtdopfx Adierf Table Surface: 380 x 350 mm Table Opening: Ø 50 mm Ram Surface: 310 x 250 mm Clamping Pin: Ø 35 mm Ram Stroke: 100 mm Max. Installation Height: 250 mm Table Height above Floor: 900 mm Downward Speed: approx. 480 mm/s Upward Speed: approx. 480 mm/s Working Speed: 20 mm/s Hydraulic Tank Capacity: 110 liters Hydraulic Operating Pressure at 20 tons: 200 bar Motor Power: 4 kW Power Supply: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light barrier, Type LVU, with single- and double-stroke and safety function - Rapid traverse and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable fixed stop - Pressing force manually adjustable via knurled wheel - Control cabinet mounted on side of the machine - Operating manual and electrical wiring diagram included - Stroke counter Required space (L x W x H): 1250 x 750 x 2000 mm Weight: 1.4 tons Good condition.

Stanje: rabljeno, Machine not operational – Control system not functioning Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column spacing front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram return force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressurization up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main drive motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-way flat guide for the ram - Hydraulic ram locking at top dead center - Separate control cabinet (200 x 50 cm) - Electrical control SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - Adjacent two-hand control console - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Crodpedzqptofx Adisf Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons. The machine was used for straightening red-hot steel flanges. From insolvency – in good condition

Stanje: rabljeno, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force: 150 tons Cjdpfxod Swtae Adierf Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram face: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram face with 4 x M16 threads and 20 mm guide slot, centrally located centering bore Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 207320; Lg-Nr. 09361, Technical Data: - Max. working length: 1250 mm - Distance between uprights: 1050 mm - Max. pressing force: 80 t - Stroke: 250 mm - Throat depth: 300 mm - Max. installation height between table and ram: 560 mm - Stroke speeds: - Downward idle speed max: 100 mm/sec - Upward speed: 100 mm/sec Credpjb Rk Ekjfx Adief - Downward pressing speed max: 12 mm/sec - Total drive power: 15 kW - Space requirement approx.: W 1750 x H 3400 x D 2000 mm - Weight: approx. 8500 kg - Equipped with: - CNC control CYBELEC DNC 7400 PSGY - CNC-controlled X-axis back gauge: 5 – 1000 mm - Z-axis adjustable in three stages, pneumatically height-adjustable - Manually movable and foldable back gauge fingers - CNC-controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Divided punch tool H 320 x L 1000 mm - Goose neck die H 320 mm x L 1000 mm - Universal die L 1000 mm

Stanje: novo, Hydraulic cylinder replacement cylinder Crjdjd Hf Uwopfx Adisf Chamber filter press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Ustreza CE standardom • Kotni stiskalnik, zasnovan za spajanje aluminijastih profilov pod 90 stopinjami • 2 zgornja stiskalnika in gibanje rezil sta hidravlična • Sistem milimetrskega merila za nastavitev višine in potiska rezil • Središčni kotni naslon je hidravličen • Gumb za izpust za natančno nastavitev Credpfxjrbk Tfo Adief • Priložena 2 rezila po 4 mm • Za delovanje hidravličnega stiskalnika in vpenjanje profila sta uporabljeni 2 pedali • Poliamidna plošča za zaščito površin profilov pred poškodbami • Na voljo sta leva in desna roka za podporo profilu

Stanje: rabljeno, Leto izdelave: 1994, številka stroja/vozila: 6915, Funkcionalnost: nepreverjeno, obratovalne ure: 27.436 h, stiskalna sila: 80 t, hod: 300 mm, širina mize: 500 mm, dolžina mize: 700 mm, širina plošče bata: 400 mm, dolžina plošče bata: 500 mm, tabela razdalj do bata: 500 mm, kapaciteta rezervoarja za olje: 485 l, skupna masa: 6.500 kg, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Ponujamo rabljeno hidravlično stiskalnico HYDRAP PRESSEN HPSK80, letnik 1994. Proizvajalec: HYDRAP PRESSEN Model: HPSK80 Credpfx Aex Ti Ausdisf Letnik: 1994 Stanje: rabljeno ID kategorije: 1330 ID tipa: 1231 Vrsta stroja: hidravlična stiskalnica Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Industrijska hidravlična stiskalnica, hidravlična stiskalnica, stiskalnica s kapaciteto 100 ton, hidravlična stiskalnica s C-okvirjem, HYDRAP PRESSEN HPS ZB 100, rabljena strojna oprema Proizvajalec: HYDRAP PRESSEN GmbH (Plüderhausen, Nemčija) – vrhunski proizvajalec industrijskih stiskalnih strojev Tip: HPS ZB 100 Serijska številka (št. izdelave): 6535 Leto izdelave: 1991 Teža: 14.700 kg Stanje: rabljeno, robustna industrijska izvedba Tehnični in obratovalni parametri: Dovoljena obremenitev / sila stiskanja: 1000 kN (približno 100 ton) Učinkovita hod (korak): 300 mm Vrsta pogona: hidravlični Napetost: 380 V Frekvenca: 50 Hz Cedpfx Adszk Amrjijrf Vrsta toka: D (trifazni izmenični tok / delta konfiguracija) Moč pogona: 45 kW Nazivni tok: 90 A Viskoznost olja: HLP 46 Količina olja: 780 litrov Zadrževalna razdalja: 34 mm Zadrževalni čas: 112 ms Varnostna razdalja: 192 mm

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03-2018, Prodamo odlično ohranjen in polno delujoč polavtomatski stroj za valoviti karton priznanega proizvajalca EMproject 89. Stroj je bil izdelan leta 2018 in je zasnovan za zanesljiv ter natančen dvobarvni tisk na kartonsko embalažo. Stroj je trenutno priklopljen na električno omrežje in je v popolnosti delujoč. Idealen je za tisk logotipov, črtnih kod in grafik na selitvene, industrijske ali transportne škatle v enem prehodu. Glavne tehnične specifikacije: Proizvajalec: EMproject 89 (Srbija) Model: FLEXO PRINTER MS-1700/1400 Letnik izdelave: 03 / 2018 Število barv: 2 (dvobarvni tisk) Maksimalni format kartona: 1700 mm x 1400 mm Napetost: 220 V Stanje: Polno delujoč, vzdrževan, možen preizkus pred nakupom. Crodpfx Aszilvgjdijf Stroj se nahaja v Sloveniji (Celje). Kupec sam organizira demontažo in prevoz. Za resnega kupca ob ogledu stroja možnost dogovora o končni ceni. Na voljo imamo tudi preostalo opremo za proizvodnjo kartonaže (rotacijski izsekovalnik, zlagalno-lepilna linija).

Stanje: rabljeno, Leto izdelave: 1984, Pressure 500 t Clear passage width 750 mm Stroke 120 mm Total power requirement 57 kW Crodpfxst Hwpyj Adisf Machine weight approx. 16 t Space requirement approx. — m HYDRAP CNC press control and Siemens Simatic S5 control, Continuously adjustable workpiece transport system around the right column, table size 400 x 740 mm, max. installation height 200 mm

Stanje: rabljeno, Leto izdelave: 1985, Pressure 63 t Clear width 1350 mm Stroke 300 mm Total power requirement 16 kW Machine weight approx. 10 t Space requirement approx. 2.0 x 1.8 x 3.4 m H Y D R A P Hydraulic double-column press (embossing press with sliding table) Model HPDb 63 Year of manufacture: 1985 Serial No. H 40/5273 Press force (top ram): 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Credpfxst Hwxuj Adief Ram plate: 1200 x 500 mm Max. installation height (without exchange device): approx. 400 mm Stroke speed up / down (at full load): 400/400 or 16 mm/sec Clearance between columns (front): 1350 mm Clearance between columns (side): 350 mm Ejector in ram, force/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx.: 16 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ swing table) Accessories / Special Features Sturdy double-column frame press with adjustable four-point prism guides, equipped with: • Hydro-pneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces for holding the pressed parts and lower tool. These are positioned under the ram for the pressing process and then moved to a stacking device at the rear after pressing. The table then returns to the starting station. This feature can also be easily removed or modified. • CNC press control (Siemens S5) with monitor for input of all relevant process data and storage of tool data for easier and quicker machine changeovers, as well as monitoring of part transport. Swing table holder included. • SICK light barriers fitted at the front of the press and loading station. • Ram equipped with electro-motorised depth stop (300 mm stroke) and hydraulic tool clamping system, also with hydraulic ejector integrated. • Pressure and oil temperature display, piece counter, foot switch, two-hand operation, central lubrication, hydraulic oil circulation cooling, stand-alone electrical cabinet, etc. The machine was used for pressing in edge trims on cylinder head gaskets. Condition: Good to very good – ready for demonstration, under power Delivery: ex stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1992, HYDRAP tip HPSKZ 63t / 20t Tlak: 63t Cjdjw R Aamjpfx Adijrf Dimenzije spodnje mize: 700x700 mm Dimenzije zgornje mize: 600x600 mm Dolžina hoda: 600 mm Svetla višina: 800 mm Blazina: 20t

Stanje: rabljeno, Leto izdelave: 1992, HYDRAP tip HPSKZ 63t / 20t Tlak: 63t Dimenzije spodnje mize: 700x700 mm Dimenzije zgornje mize: 600x600 mm Dolžina hoda: 600 mm Svetla višina: 800 mm Blazina: 20t Cjdpjw Slnijfx Adisrf

Stanje: dober (rabljeno), Leto izdelave: 1991, Naprodaj je naša stiskalnica Hydrap z zmogljivostjo 160 ton. Naprava se prodaja le kompletno. Delovnih ur: 20.242. Stanje: dobro ohranjena. Ogled je možen in zaželen. Lokacija: Szügy / Madžarska. Csdpfx Adstu Szlsijrf

Leto izdelave: 1992, stanje: rabljeno, Pritisk 40 t Uporabni hod 500 mm Pogonska moč 17 kW Dohodni hod 48 mm Čas dohodnega hoda 110 ms Varnostna razdalja 176 mm Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru ogledati pod napetostjo. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v dobavo le, če je to navedeno v dodatnih informacijah. Credjzdvcajpfx Adief Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 160 t Throat depth: 360 mm Stroke: 300 mm Table size: 1500 x 700 mm Ram clamping surface: 1200 x 560 mm Return force: 40 t Crodpfx Adjh Ra R Isijf Stroke speed: 400 mm/min Stroke rate under load: 16 - 42 strokes/min Stroke speed return: 350 mm/min Blankholder force: 630 kN Blankholder stroke: 100 mm Total power requirement: 42 kW Machine weight approx.: 19.5 t Ejector force: 50 kN Ejector stroke: 50 mm

Stanje: rabljeno, Leto izdelave: 1991, Tlak 400 t Hod 300 mm Vpenjalna površina mize 1200 x 700 mm Površina berbe 1200 x 700 mm Vgradna višina 500 mm Nastavitev hoda 300 mm Povratna sila 348 kN Izmetalna sila 100 kN Cjdpjtqqlcsfx Adisrf Hod izmetalca 100 mm Krmiljenje SIEMENS Simatic S 5 Skupna potrebna moč 65 kW Teža stroja cca 28 t Dimenzije stroja D x Š x V 4,4 x 2,75 x 4,0 m = hidravlična prebijalna in reliefna stiskalnica Dodatna oprema: miza za menjavo orodja - z blaženjem rezalnega udarca Blažilna sila 4000 kN Blažilni hod 5 mm Nastavitev vretena 200 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: 6538, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 20.242 h, stiskalna sila: 163 t, hod: 500 mm, sila umika: 22 t, skupna masa: 25.000 kg, vrsta aktuacije: hidravlični, TECHNICAL DETAILS Ram Press force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Unit Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Codpfxoxgt Tzj Adiorf Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling/Filtration Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Backgauge Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: A prior inspection of the machine is strongly recommended by the seller, as the press cannot be removed from the hall in its installed condition. The seller may be able to assist in finding a specialized company for the relocation of the machine.