Hidravlična stiskalnica

HYDRAP HPSZb 160

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, obratovalne ure: 20.242 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6538, stiskalna sila: 163 t, skupna masa: 25.000 kg, sila umika: 22 t, hod: 500 mm, vrsta aktuacije: hidravlični, TECHNICAL DETAILS Ram Press force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Unit Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling/Filtration Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Hodpfxexgt Tzo Af Tsfb Backgauge Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: A prior inspection of the machine is strongly recommended by the seller, as the press cannot be removed from the hall in its installed condition. The seller may be able to assist in finding a specialized company for the relocation of the machine.

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Hfjdpfx Askvnumef Tjb Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 160 t Throat depth: 360 mm Stroke: 300 mm Table size: 1500 x 700 mm Ram clamping surface: 1200 x 560 mm Return force: 40 t Stroke speed: 400 mm/min Stroke rate under load: 16 - 42 strokes/min Hsdpfx Afsh Ra R Io Tefb Stroke speed return: 350 mm/min Blankholder force: 630 kN Blankholder stroke: 100 mm Total power requirement: 42 kW Machine weight approx.: 19.5 t Ejector force: 50 kN Ejector stroke: 50 mm

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Hfodpfxovuuaie Af Tjb Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Leto izdelave: 1981, Stanje: pripravljen za uporabo (rabljen), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls down to min. Ø 450 mm, machine overhauled in 2009, factory inspection in 2012. Hfjdjnvfdbepfx Af Teb

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Hedpfxjhlnzks Af Tefb Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Hodog U Utvspfx Af Tjfb Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Leto izdelave: 1993, Stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Hodsihf R Uepfx Af Tsfb Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Movable cylinder - Electrically or manually operated Hfodpfogp Dc Rex Af Teb - Pressure gauge - Emergency stop - 400V

Stanje: rabljeno, Double-column eccentric punching press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of construction 1988 / 92 Pressing force: 160 t Column gap: 970 mm Lateral column gap: 560 mm Table size: 900 x 900 mm Ram area: 900 x 700 mm Die installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Stroke rate: 25 to 70 strokes/min Strip width in roller feeder: max. 400 mm Motor power: approx. 15 kW Power supply: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight counterbalance cylinder with compressed air - Hydraulic overload protection in ram - Pneumatic clutch-brake combination Hfodpfxedzqlve Af Tjb - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Control cabinets for press and feeder, mounted together on a platform at the side Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder: 2100 mm Press depth with drive motor: 2300 mm Overall press height: 4150 mm Net weight of press: approx. 18 t For transport, the drive motor is dismantled and the machine is laid on its face. Included: NC roller straightener-feeder ALBA Type GGVHY400 Device Nos. 1405 and 1406, Order No. 910708 (Year of construction 1992) - ALBA PSS 300 feed control - Feed length programmable from 0.1 to 6500 mm per stroke, infinitely adjustable - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit on the press to adapt material entry height - Hydraulic power unit standing next to it - Pull-straightening device with hydraulic opening and closing Total weight of the complete system: approx. 24 t Space required for transport: one mega trailer with 3 meters internal height and 13.6 meters loading length Good condition