Homag Sandteq W-100 Rc Advanced nakup rabljenega (51.577)

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, 1. Enota jekleni valj Ø140 mm 2. Kombinirana enota – gumijasti valj in elektronska segmentna blazinica, EPS sistem delovna širina 1100 mm, delovna višina 3–160 mm – dimenzija traka 1900 x 1120 mm glavna moč 30 kW – skupna masa pribl. 1900 kg Dedpoym Rl Nofx Ac Noch

Stanje: rabljeno, številka stroja/vozila: 008479, Maks. obdelovalna širina: 1650 mm Min. obdelovalna debelina: 3 mm Delovna miza: fiksna višina Število delovnih enot: 4 kos Dcodpoy Edqwsfx Ac Neh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: Dedeyw Ndmepfx Ac Noch SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG Sandteq w-300 Tehnični podatki: - Hitrost pomika traku: 2,5 - 13 m/min - Delovna višina: 900 mm - Delovna širina: 1350 mm - Število obdelovalnih enot: 2 - Debelina obdelovanca: 3 - 160 mm z avtomatskim merjenjem - Dimenzije stroja D x Š x V: pribl. 2115 x 2100 x 2415 mm - Teža stroja: pribl. 4000 kg - Skupna električna moč: pribl. 39 kW - Priporočena predhodna zaščita: 80 A - Vakuumska miza - Q = prečna brusilna enota s Poly V-jermenom / 13,5 kW (2-16 m/s) - X = kombinirana enota s kontaktno valjčko in sistemom pritisnega nosilca / 18,5 kW (2-18 m/s) - Super-finish funkcija: kalibriranje, vmesno brušenje furnirja & laka, fino brušenje furnirja & laka Dodpfoxczmzex Ac Njch - Krtačna enota - Čistilni rotor z ionizacijo - Powercontrol s Powertouch Stroj je takoj na voljo. Nakladanje na tovornjak je možno.

Stanje: rabljeno, Linear actuator, linear gearbox, lifting gearbox, spindle drive - Removed from a Homag edge banding machine Dcodpfx Aceb R Iulo Njh - Heavy-duty version - Stroke: 100 mm - Quantity: 2 units available - Price: for both units together - Dimensions: 250/230/H800 mm per unit - Weight: 66 kg per unit

Leto izdelave: 2024, stanje: novo, The RC 100 roll crusher is ideally suited for the size reduction of soft, medium-hard, brittle, and hard materials such as coal, ores, slags, minerals, graphite, bitumen, and many more. Dedpfx Ajiamtaoc Nech

Leto izdelave: 2006, stanje: rabljeno, največja debelina roba: 12 mm, hitrost pomika os X: 40 m/min, višina plošče: 60 mm, dolžina plošče: 2.400 mm, širina plošče: 1.000 mm, številka stroja/vozila: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package consists of four machines as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Max. panel length: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Dcodoy Ur Hlopfx Ac Njh Grooving unit Pressure system Panel support guides NC positioning Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically sequenced engagement NC unit positioning Unit 2: Double milling top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically sequenced engagement NC positioning Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/planing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Edge scraping blade NC positioning Edge processing unit 7: Glue scraping blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F Dcodpfxsinigmo Ac Neh M.02) SINGLE-SIDED EDGE BANDER (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (variable) m/min 18 - 32 Panel infeed system WZ 14/30 Joint trimming unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + pre-melter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (No. 12 positions) End trimming unit WK13 (CHAMFER / STRAIGHT Automatic adjustment) Pre-milling unit (2 x 0.55 kW) Pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copying milling unit (profile copying) FF 32 (4 x 0.4 kW) Automatic changeover device Contour milling unit (fine milling) CNC-controlled FK 31 (30 m/min), recently added after technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Stanje: rabljeno, številka stroja/vozila: 006079, Maximum panel width: 1200 mm Dedpfx Aou N Slvjc Nech Maximum panel length: 3200 mm

Stanje: rabljeno, številka stroja/vozila: 007998, Maksimalna širina panela: 1900 mm Maksimalna dolžina panela: 2700 mm Maksimalna hitrost pomika: 30 m/min Dcedjw Idacopfx Ac Njh

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Dsdpfodg Itnjx Ac Nech Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: pripravljen za uporabo (rabljen), CRE Rösler Electronic CDFM150BX08 monitor A01-10169 SN: 1000951 / 100-245V AC / 40W, rabljen, dobro ohranjen, 100% delujoč, obseg dobave po slikah. Djdpfx Acsx Eq Ene Nech

Stanje: novo, Schunk SRU+ 40-W / 30052464 univerzalna vrtljiva enota + 2 x PZN+ 100-1 / 303312 univerzalni prijemalniki + SGE / 30077266 + 6 x BSWS-B 100 / 303027 sistem za hitro menjavo čeljusti, nerabljeno, 100% funkcionalno, dobava po fotografijah Dsdpfxei Ec Nke Ac Njch

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping Dodpfx Aehbal Doc Nech - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Leto izdelave: 2024, stanje: novo, The Wattsan 100W is a brand-new portable laser metal cleaning machine. Thanks to its air cooling system, the device is relatively compact. It operates quietly, quickly, and is easy to use even for beginners. It is ideal for removing rust, paint, petrochemicals, oxide layers, weld scale, carbon deposits, etc., from metal parts. This portable machine can also clean adhesive and galvanized materials, as well as gypsum and stone products. Thanks to pulse cleaning, this machine can remove thick layers of rust, paint, petroleum products, oxides, scale, and carbon residues from metals without heating or damaging them. For further information, you can call our managers! Features of the Wattsan Cleaning 100 W machine: Cooling: Air Laser Power: 100 W Dcjdpfx Acer Hbwke Noh Machine Dimensions: 750x600x680 mm Laser Source: JPT Weight: 46 kg Virmer offers not only first-class machines but also service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if required. In addition, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding equipment, markers, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and is continuously developing with the help of its customers. Thanks to customer feedback, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and powerful—allowing you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are happy to assist you. You will find a wide range of laser machines and accessories with us: CO2 laser machine; laser cutting machine for metal; laser metal cutter; fiber metal laser; fiber metal laser engraving machine; CNC milling machine for metal; wood milling machine; CNC milling machine; laser engraving machine; laser engraver; laser cutting machine for plywood; laser engraver; laser cutting machine for metal; CNC milling machine; laser marker; lenses; coolers; machine cooling systems; S&A chillers; IPG laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machines.

Stanje: novo, Leto izdelave: 2023, obratovalni tlak: 1.000 letvica, gorivo: dizel, Kärcher HD 9/100 De Skid Advanced Ultra high-pressure cleaner with up to 1000 bar Dcjdpfjvz Aq Asx Ac Njh This is an unused demonstration unit! Current manufacturer RRP: €80,000! Sale is offered as a used machine with exclusion of return, warranty, and guarantee. Net price: €24,900 // Gross price: €29,631 - Inspection welcome! - Nationwide shipping can be arranged, shipping cost is €300 - We would be happy to provide you with an attractive leasing or financing offer in cooperation with our leasing partner!

Stanje: dober (rabljeno), Rotary vane vacuum pump /// Oil circulation lubricated Manufacturer: Busch Model: RC 0100B Ultimate pressure: approx. 20 mbar Dcjdpobrantsfx Ac Njh Pumping speed: approx. 100 m³/h Condition: Fully overhauled If you have any questions regarding this listing or general inquiries about vacuum generation, we are happy to assist you.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), 1 piece radial fan Manufacturer: Turbowerke Meissen Howden Model: LRN 0800 W 100/11 GR360 Airflow: 56,000 m³/h Pressure increase: 2,000 Pascal at 20°C Speed: 1,000 rpm Shaft power: 37 kW Dodpfxekn H Ize Ac Njch Weight: 1,850 kg Year of manufacture: 2003 Dimensions: Width: 2,400 mm Length: 1,530 mm Height: 2,040 mm Inlet diameter: 800 mm Shaft center height without spring buffer foot: 1,250 mm Discharge side dimensions: 700 x 700 mm Including 360° rotatable inlet nozzle and transition piece. Including compensator for discharge side. No damage or wear. Frequency converter available as an option.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1746, dolžina gredi: 10.564 mm, laserska moč: 100 W, vrsta hlajenja: zrak, delovno območje: 1.750 mm, skupna masa: 205 kg, višina mize: 1.760 mm, dolžina mize: 12.000 mm, širina mize: 9.200 mm, Oprema: kabina, Used fiber laser system for laser engraving, marking, and microstructuring on metals and plastics. Showroom machine, laser class 1, CE-compliant, Made in Germany. Dcedpfxoyfvhgo Ac Nsh Laser & Beam Source - IPG Ytterbium fiber laser - Output: 100 W - Wavelength: 1064 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external chiller required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer laboratory values; actual values may vary depending on application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Kontrollic cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom modifications available on request - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import with one click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as a red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sit/stand workstation - Aluminum profile housing, front door with laser protection glass, bright workspace lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25 mm hole grid, 710 × 400 mm - Motorized Z-axis, travel distance 500 mm (gross) - Rear door for oversized workpieces (with door open, laser class 4) - Extraction port DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35 °C - Connected load: 230 V / 50 Hz Condition & Delivery - Showroom machine, tested - Optional: Delivery including commissioning within Germany

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Vollmer RC 100 alignment center Dcjdpfx Acsvw Nb Tj Neh

Stanje: dober (rabljeno), Flat gear motor, geared motor, electric motor, geared electric motor, flat gear motor, flat-geared motor Dsdpot Hy Thefx Ac Nech - Manufacturer: KEB, flat gear motor - Type: F 4.2 C DK 100 LX 4 W TW i = 11.38 - Speed: 50 rpm - Motor: Type SK 100 L/40 - Power: 3.0 kW / 1,410 rpm - Hollow shaft: Ø 40 x 150 mm - Protection class: IP56 - Dimensions: 445/230/H360 mm - Weight: 60 kg

Stanje: dober (rabljeno), Tubular heater, heating tape, heating jacket, mica heater, cylinder heater, heating cylinder, ceramic heating band - Manufacturer: Erge, heating tape, heating jacket - Type: Ø165 x 100 mm - Part no.: 829 486 65 - Heating capacity: 2500 W - Voltage: 230 V - Dimensions: 220/180/H100 mm Dodpfxelu N Eao Ac Nech - Weight: 1.3 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The JSM is an affordable all-round machine for small and medium-sized craft businesses with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height: 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) - Table extension with non-driven rollers at machine infeed and outfeed (300 mm each) - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Program for remote maintenance - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - Energy Management System (EMS) for energy-efficient machine operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt feed side) Dedswz Ignjpfx Ac Njch - Terminal and belt feed side on the left - Electrical configuration: 400 V, 50 Hz Advanced package additional features: - Vacuum table pre-drilled for connection of vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air blast tube - CSD pressure beam system (magnetic pressure beam) instead of ACP system - Oscillating sanding belt cleaning - Belt Manager software

Stanje: zelo dobro (rabljeno), Profesionalni diskasti rezkar Ø100 mm x 6 mm z izmenljivimi rezilnimi ploščicami, nameščen na držalu SK40 – Izdelano v Nemčiji. Idealno za hitro in natančno utorno rezkanje, rezanje ter bočno obdelavo jekla, litega železa, aluminija in drugih konstrukcijskih materialov. Rezkar je opremljen z večrezilnimi ploščicami – zagotavlja visoko učinkovitost rezkanja in dolgo življenjsko dobo orodja. Celota v dobrem delovnem stanju, pripravljena za takojšnje delo v CNC centru. • Premer rezkarja: Ø100 mm • Širina reza: 6 mm • Izmenljive rezalne ploščice • Priprava: konus SK40 • Stanje: rabljeno – 100% delujoče • Proizvodnja: Izdelano v Nemčiji Dcsdpfx Asxllclec Njh

Stanje: rabljeno, številka stroja/vozila: 008402, Najv. širina plošče: 4300 mm Najv. dolžina plošče: 2500 mm Najv. izstop glavnega žaginega lista: 110 mm Dcodpfxoygtbmo Ac Noh Število vzdolžnih vpenjal: 9 Število prečnih vpenjal: 4