Hidravlični Vlečni Valj 50 T nakup rabljenega (94.865)

Stanje: dober (rabljeno), Tension cylinder, hydraulic cylinder, support cylinder, hydraulic piston, tension hydraulic cylinder Iaedslxulcspfx Agtst - Hydraulic tension cylinder: with integrated hand pump - Tensile force: 50 t - Stroke: 110 mm - Piston rod: Ø 80 mm - Mounts: Inner 145 x 47 mm, see photos - Quantity: 1 cylinder available - Price: per unit - Dimensions: 810/155/H410 mm - Weight: 66 kg/unit

Stanje: dober (rabljeno), Tensile cylinder, hydraulic cylinder, support cylinder, hydraulic ram, traction hydraulic cylinder Iedoi Exq Hepfx Agtjat - Hydraulic traction cylinder: with integrated hand pump - Traction force: 50 t - Stroke: 140 mm - Piston rod: Ø 80 mm - Mountings: Internal 145 x 47 mm, see photos - Quantity: 1 cylinder available - Price: per unit - Dimensions: 810/155/H415 mm - Weight: 66 kg/unit

Stanje: rabljeno, Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull-type hydraulic cylinder - Hydraulic pull cylinder: with integrated hand pump - Pulling force: approx. 50 t - Stroke: 150 mm - Piston rod: Ø 80 mm - Mountings: internal 150 x 50 mm, see photos - Quantity: 8 cylinders available - Price: per piece - Dimensions: 810/155/H480 mm / 820/150/H585 mm ... Iedokahknjpfx Agtjat - Weight: approx. 65 kg /pc.

Stanje: rabljeno, Traction cylinder, hydraulic cylinder, support cylinder, hydraulic ram, traction hydraulic cylinder -Manufacturer: Bahco, hydraulic traction cylinder Type CDXR 50-125 -Traction force: approx. 50 t -Stroke: 125 mm -Piston rod: Ø 50 mm Ijdpfekuctvsx Agtoat -Operating pressure: max. 800 bar -Mountings: internal 150 x 50 mm, see photos -Quantity: 1x cylinder available -Dimensions: 925/125/H165 mm -Weight: 32 kg

Stanje: dober (rabljeno), Tension cylinder, hydraulic cylinder, support cylinder, hydraulic ram, tension hydraulic cylinder Ijdpfxei Exqio Agtoat - Hydraulic tension cylinder: with integrated hand pump - Tensile force: 50 t - Stroke: 155 mm - Piston rod: Ø 80 mm - Mountings: internal approx. 145 x 50 mm, see photos - Quantity: 5 cylinders available - Price: per piece - Dimensions: 850/160/H420 mm / 810/155/H415 mm / 810/155/H420 mm / 815/150/H630 mm - Weight: 68 kg / 66 kg / 62 kg / 65 kg

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure plunger - Manufacturer: Lukas, single-acting lightweight alloy cylinder with spring return, stroke 50 mm - Model designation: HP 50/50 Iodpfewxtt Iox Agtoat - Plunger diameter: 112 mm - Pressure: max. 450 bar - Lifting force: 50 t - Dimensions: 220/160/H220 mm - Weight: 19 kg

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram - Manufacturer: Lukas, single-acting lightweight alloy cylinder with spring return, stroke 50 mm - Model designation: HP 50/50 - Ram diameter: 110 mm - Lifting force: 50 t - Dimensions: 220/165/H220 mm Iajdpfxswxtv As Agtot - Weight: 19.5 kg

Stanje: dober (rabljeno), 25 running meters of tyre racks Used equipment, very good condition, see photos Height: 2.5 m Depth: 50 cm Bay load: 9000 kg Beam length: 2.1 m Beam load per level: 1000 kg Asking price: €1,950 net ex stock Offer includes: + 12 uprights pre-assembled, 9t bay load, depth 50 cm, height 2.5 m + 66 beams, length 2.1 m, 1000 kg load per level + 132 safety clips + 24 concrete anchors + Load plates Alternative configurations available on request! Goods in stock. Transport and installation available on request. Inspection possible by appointment at any time. Further information on request. Constant stock of over 5,000 running meters of pallet racking from numerous manufacturers available. (Changes and errors in technical data, information and prices as well as prior sale reserved! Please see our terms and conditions, all prices excluding VAT ex stock.) Isdpfx Agsfdik Ietjat Purchase / Sale: We are constantly looking for and offering numerous items from a wide range of sectors Broom-clean clearance of business premises Business liquidations Fast - flexible - efficient! We also clear and/or dispose for insolvency administrators. Write to us with a few keywords and we will get back to you promptly. To access our page, please click on our logo!

Stanje: skoraj kot novo (rabljeno), 60 running meters Nedcon tyre racking New & used items, see pictures. Height: 3 m Depth: 50 cm Beam length: 3.7 m Load capacity per beam/level: 1,000 kg Frames: blue Beams: blue painted Negotiable price: €5,250,-- net ex-warehouse Iedpfx Agei Hl T Istsat Offer includes: + 16 pre-assembled frames, depth 50 cm, height 3 m + 90 beams, length 3.7 m, 1,000 kg load capacity per beam + 180 safety clips + 64 concrete anchors Goods in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 running meters of pallet racking in stock from various manufacturers. (Subject to technical changes and errors, interim sale reserved! See our T&Cs, all prices excl. VAT ex warehouse) Purchase / Sale We are continuously looking for and offering numerous items from various sectors: - sweep-clean clearances - complete business liquidations - fast, flexible, and efficient! We also clear and/or dispose on behalf of insolvency administrators. Contact us with a few keywords and we will respond promptly. Click on our logo to visit our page!

Stanje: skoraj kot novo (rabljeno), 50 running meters Nedcon pallet racking Brand new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 7 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per level: 3,050 kg Negotiable price: €10,950,-- net ex stock Offer includes: + 19 pre-assembled frames, depth 110 cm, height 7 m + 144 beams, length 2.7 m, 3,050 kg load/level + 288 clip-on safety pins + 38 concrete anchors Load capacity signage and relevant documents are, of course, included. You will find additional accessories in our accessories catalogue. Iaodsfkgq Sspfx Agtot Frames: blue RAL 5019, bracing galvanized Heights from 2 m up to 7 m available from stock Bay load capacity: 12 tonnes; higher bay loads available upon request Beams: orange RAL 2008 Beam lengths in stock: 1.85 m, 2.7 m, 3.3 m, 3.6 m Goods are in stock. Transport and assembly available on request. Other configurations available on request. Over 2,000 meters in stock. Viewing possible at any time by appointment. Further information available on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, details, and prices as well as prior sale! See our General Terms & Conditions. All prices exclude VAT, ex stock.) Purchase / Sale We are constantly looking to buy and offer various items from different sectors: – Swept-clean company liquidations – Business closures – Quick – flexible – efficient! We also clear out or dispose of properties for insolvency administrators. Write to us with a few keywords, and we will respond promptly. To visit our website, please click on our logo!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, D-T50 – CNC revolverová vysekávací lis | Heavy Duty CNC revolverová vysekávací lis – D-T50 | 500 kN | Formát plechu 2500×1250 mm Robustní CNC revolverový vysekávací lis určený pro vysoce objemovou výrobu plechů. S děrovací silou 500 kN a rychlostí až 160 zdvihů/min poskytuje model D-T50 výjimečnou produktivitu a přesnost. Hlavní technické parametry: Kapacita: 500 kN Rychlost zdvihů: 160 zdvihů/min Formát plechu: 2500 × 1250 mm Max. formát plechu (s jedním posunutím): 5000 × 1250 mm Max. tloušťka plechu: ≤ 6,35 mm Přesnost: ± 0,1 mm Posuvová rychlost: 80 m/min Počet stanic v revolveru: 16 / 24 / 32 Pracovní tlak vzduchu: 0,65 MPa Rozměry stroje: 5000 × 5200 × 2300 mm ✅ Vysoká rychlost děrování – ideální pro sériovou výrobu ✅ Možnost zpracování větších plechů díky posunutí až na 5000 mm ✅ CE certifikace | Záruka v ceně | Náhradní díly a servis zajištěny D-Y80 – CNC revolverová vysekávací lis | Heavy Duty | Silnostěnný materiál CNC revolverová vysekávací lis – D-Y80 | 800 kN | Silný plech až do 15 mm Robustní CNC vysekávací lis navržený pro zpracování silných plechů. Model D-Y80 zvládá materiál do tloušťky až 15 mm s děrovací silou 800 kN – ideální pro konstrukční výrobu a práci s těžkými tabulemi. Isdpfey Swn Nsx Agtjat Hlavní technické parametry: Kapacita: 800 kN Rychlost zdvihů: 100 zdvihů/min Formát plechu: 2000 × 800 mm Max. tloušťka plechu: 6–15 mm Přesnost: ± 0,15 mm Posuvová rychlost: 60 m/min Počet stanic v revolveru: 6–12 Pracovní tlak vzduchu: 0,65 MPa Rozměry stroje: 4100 × 4000 × 2400 mm ✅ Výjimečná děrovací síla – specialista na silné plechy ✅ Robustní konstrukce pro náročné průmyslové provozy ✅ CE certifikace | Záruka v ceně | Náhradní díly a servis zajištěny

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 137.000 mm, višina police: 5.000 mm, število vrst polic: 10, prosta razpetina: 3.300 mm, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 137.000 mm, dolžina opore: 3.300 mm, 2 enojne vrste paletnih regalov + 4 dvojne vrste paletnih regalov vsak 13,7 m dolg, 5 m visok, 1,1 m globok, vsaka 4 polja, širina polja 3,3 m, vsaka 3 nivoji prečk, nosilnost na prostor 3250 kg. - 50 okvirjev (RM5011 - RAL5019) Iaodsyzl T Eepfx Agtet vključno s talnimi ploščami, podložnim materialom in vijaki - 40 distančnikov/povezovalnikov za dvojne vrste (ZAbh20) - 200 talnih sider (ZZBA1210) - 240 posameznih prečk (T33135 - RAL2008) - 10 zaščit proti trku/odbojem (ZRS40901) - 10 tabel z nosilnostjo (BSMcP) Okvirji so privijačeni, ne predmontirani Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava brezplačno na gradbišče/mesto montaže - razklad s tovornjaka izvede kupec z lastno dvižno napravo - dostava po celotnem delu Zvezne republike Nemčije, razen otokov! - Dostave v države EU po individualnem dogovoru.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, največja hitrost vretena: 9.000 obr/min, hitrost vretena (min.): 20 obr/min, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, hitri pomik na osi Z: 12 m/min, širina mize: 500 mm, dolžina mize: 700 mm, največja hitrost vrtenja: 9.000 obr/min, vrtljajska hitrost (min.): 20 obr/min, obremenitev mize: 200 kg, skupna masa: 3.500 kg, teža obdelovanca (maks.): 6 kg, potrebna širina: 2.300 mm, zahteva za prostor dolžina: 2.300 mm, potrebna višina: 2.000 mm, Naprodaj: Deckel MAHO DMU 50 T. Iajdsy Raf Uspfx Agtet Letnik 2001. Stroj je opremljen z priljubljenim in zmogljivim krmiljenjem Heidenhain MillPlus / 3D, redno vzdrževan v delavnici in takoj pripravljen za uporabo. Osnovni 3-osni stroj z ročno vrtljivo nagibno mizo [3+2 osi]. Na voljo od 21. tedna. Možen ogled pod napetostjo na lokaciji v bližini Salzburga, Avstrija, takoj. Stanje: zelo dobro (nizke delovne ure za starost) Vključuje dodatno opremo. Teža stroja: 3.500 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 22 kW (29,91 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 530 m³/h, Technical Data - Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 pieces (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput capacity: 530 m³/hour Throughput capacity under operating conditions: 260 m³/hour Feed opening dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying system: 5-fold vertical, fully automatic Throughput rates at bulk density of 30 kg/m³: 6 to 7 t/h 50 kg/m³: 7 to 9 t/h 100 kg/m³: 11 to 14 t/h Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank volume: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has undergone partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is available for sale at short notice. The following refurbishment work was carried out: General work: Iasdpfx Ajy R Npiegtjt - Machine cleaned, derusted, primed, partially repainted - Wire run-in marks at the channel passes welded and smoothed Hydraulic unit: - Hydraulic oil tank completely drained, tank cleaned, new oil filled - Oil and air filters replaced - Leaking oil sight glass on hydraulic tank replaced - All hydraulic hoses replaced Electrics: - Language in program menu set to English - Two key switches on control panel replaced - Control cabinet replaced - Indicator lamp on control cabinet replaced - Flap limit switch replaced - Whirlator electrics replaced, connected, and tested Press ram: - All four press ram rollers removed and replaced - Main hydraulic cylinder disassembled, serviced, and partially overhauled; cylinder tube honed, complete seal kit replaced, leak test carried out - All plastic wear pads on press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders disassembled, serviced, and partially overhauled; both cylinder tubes honed, complete seal kits replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire deflection rollers replaced - Needles adjusted and set - All wire guide rollers in needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on drillomat, below the twister fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. No liability is accepted for technical data or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.050 mm, širina bale: 100 mm, višina bale: 700 mm, teža bale: 500 kg, skupna masa: 8.500 kg, kapaciteta rezervoarja za olje: 400 l, moč: 15 kW (20,39 KM), leto zadnje generalne obnove: 2026, volumenski pretok: 108 m³/h, Technical data – Baler: Manufacturer as per nameplate: BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 units Press force: 50 t Specific press force: 650 kN/m² Feed hopper dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/h Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: 30 kg/m³: approx. 3.1 t/h 60 kg/m³: approx. 4.5 t/h 100 kg/m³: approx. 7.2 t/h Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions (excluding chute): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the baler: The baler was previously used exclusively in a production environment for baling cardboard and has been regularly serviced. With only 13,209 operating hours, the machine has seen comparatively low use. The baler has undergone partial refurbishment and final testing in our workshop. Iaedpfoy R Npcjx Agtet The following refurbishment work was performed: - Machine cleaned - Bale retainer freed and lubricated - Photoelectric sensor renewed - Twisting unit completely disassembled, all bearings and plastic guides replaced, lubricated, and chain tension adjusted - Knives and counter-knives removed, sharpened, and reinstalled - Knife gap re-adjusted - General maintenance work carried out and grease points serviced Scope of delivery: - 1 baler with wire roll boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) - 1 wire roll box for floor mounting (1450 x 380 x 360 mm) A tautliner (curtain side truck) with an effective internal height of 2700 mm is required for transport of the baler. Remarks: Full documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is included. Inspection by appointment possible. We accept no liability for technical data or for possible errors or omissions.

Stanje: rabljeno, Hidravlični vpenjalni cilinder za upravljanje vpenjalnih glav Primeren za Gildemeister GDM 42 Prehodni vpenjalni cilinder RÖHM SZS 45/92 559 Ident. št.: 414096 Tov. št.: 7069 Delovni tlak: maks. 40 bar Št. obratov: maks. 7000 obr/min Premer bata: 125 mm Premer batnice: 62/53 mm Hod bata: 25 mm Notranji premer v cilindrični cevi: 45 mm Iaedpfx Agjy E T A Ajtot Hidravlični vpenjalni cilinder za odpiranje in zapiranje avtomatskih vpenjalnih glav. Za hidravlično upravljanje vpenjalnih glav ali vpenjalnih tulec. Prehodni vpenjalni cilinder za hidravlično upravljanje vpenjalnih glav/tulec s prehodom.

Stanje: dober (rabljeno), Hidravlični cilinder, podporni cilinder, hidravlični bat, tlačni bat - Premer bata: 80 mm Iasdpsd Erv Njfx Agtjt - Batična palica: Ø 36 mm - Hod: 100 mm - Univerzalna uporaba - Količina: 1 kos na voljo - Cena: na kos - Dimenzije: 415/120/V110 mm - Teža: 14 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2482458, Leto izdelave: 2020, nosilnost: 5.000 kg, dvižna višina: 4.700 mm, težišče tovora: 500 mm, vrsta goriva: dizel, tip droga: triplex, moč: 55,4 kW (75,32 KM), širina nosilnega okvirja vilic: 1.250 mm, dolžina vilic: 1.220 mm, širina vilic: 150 mm, debelina vilic: 55 mm, notranji radij obračanja: 130 mm, zunanji obračalni polmer: 2.920 mm, velikost sprednje pnevmatike: 300-15 19PR, velikost zadnje pnevmatike: 7.00-12 12PR, skupna masa: 6.930 kg, skupna višina: 2.390 mm, skupna dolžina: 4.470 mm, skupna širina: 1.490 mm, barva: rdeča, Oprema: kabina, vilice za palete, Tehnični podatki Letnik: 2020 Iaedpsyqziaofx Agtst Motor: Dizel 55,4 kW Tip menjalnika: W Največja nosilnost: 5.000 kg Težišče tovora: 500 mm Pnevmatike: 300-15 18PR / 7.00-12 12PR Dimenzije vilic (D x Š): 1,22 m x 0,15 m x 0,055 m Skupne dimenzije (D x Š x V): 4,47 m x 1,94 m x 2,39 m Teža: 6.930 kg Višina dviga: 4,70 m Prostornina motorja: 2,92 l Dviganje z/brez tovora: 0,43 m/s / 0,46 m/s Maks. vzpenjalna sposobnost: 20% Obratni polmer: 2,92 m Obrati pri največjem navoru: 2.200 rpm Število valjev: 4 Vožnja z/brez tovora: 13 km/h / 23 km/h Popolnoma delujoč, običajni sledovi uporabe, UVV

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Oprema: hidravlika, nizka raven hrupa, The TEC-POINT KT53S hydraulic breaker in a silenced version is the powerful solution for professional demolition, concrete breaking, foundation work, civil engineering, pipeline construction, landscaping, as well as municipal and urban construction sites. Thanks to the fully enclosed, sound-insulated housing, the breaker operates at reduced noise levels while effectively protecting internal components from external influences on the job site. This makes the KT53S particularly suitable for use in residential areas, noise-sensitive zones, and everywhere that requires robust performance with a minimized noise footprint. The replaceable upper swivel head provides versatility for various applications, while the substantial overall length ensures extended reach and efficient energy transfer for breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 2.0 to 4.5 tonnes 📍 Immediately available from stock in Rheda-Wiedenbrück 🚚 Local pickup or Europe-wide shipping via freight carrier possible 💶 Price: €1,799 net plus VAT – negotiable 🧾 Invoice issued with shown VAT 🛠️ Full kit including 2 pointed chisels, nitrogen cylinder, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT53S Silenced Type 🔹 Version: soundproofed design 🔹 Suitable for excavators: 2.0 to 4.5 tonnes 🔹 Weight: 165 kg 🔹 Operating pressure: 90–120 kg/cm² (approx. 88–118 bar) 🔹 Required oil flow: 25–55 l/min 🔹 Impact rate: 600–1250 blows per minute 🔩 Mounting Dimensions / Compatibility 🔹 Pin bracket width: 110 mm 🔹 Center-to-center pin distance: 120 mm 🔹 Pin / hole diameter: Ø 35 mm 🔹 Chisel diameter: 53 mm We are happy to check the suitable mount for your excavator model and adapt it accordingly upon consultation. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Viewing Contact us today – we are happy to assist you personally and help you select the right hydraulic breaker for your carrier machine. We warmly invite you to visit our warehouse in Rheda-Wiedenbrück. On site, you can inspect, compare, and, by arrangement, test our machinery and attachments. Iedpfx Asy N Sfdsgtjat We look forward to your inquiry!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prečna žaga, vrtljiva +/-45°, model OMGA T 50 350 z izpuhom za prah Iodsm Ak Elspfx Agtjat rabljeni stroj stanje delovanja: Odlično CE-skladnost: Da popolnoma z izpuhom za prah z dodatki za plosko mizo Tehnični podatki: Napetost: 380/50 Moč motorja: 3 KM (2,2 kW) Premer rezila: 350 mm Z rezilom 90°: največja višina reza: 110 mm največja širina reza: 130 mm Z žaginim listom 45°: največja višina reza: 110 mm največja širina reza: 92 mm Teža stroja: 90 kg Teža izpušne omarice: 50 kg

Stanje: rabljeno, Leto izdelave: 2017, 2017 MG4 R2014 R Hidravlični valji za upogibanje Delovna dolžina: 2.050 mm. Dimenzije valjev: zgornji 220 mm | srednji 200 mm | spodnji 170 mm. Zmogljivost valjanja/upogibanja: 14 mm / 10 mm. Teža stroja: 3.200 kg. Moč motorja: 5,5 kW. Skupne dimenzije (D × Š × V): 3,8 × 1,6 × 1,5 m. Dimenzije roke (D × Š × V): 3,0 × 0,6 × 3,0 m. Serijska številka 17104 (2017) Iajdpfey Dr Nrex Agtst

Stanje: rabljeno, Single-column hydraulic press EXNER Type EEX 20 S Machine No. 1615 Year of manufacture: 1980 Pressing Force: 20 tons Throat Depth: 180 mm Table Surface: 380 x 350 mm Iedpfxoyz Dtdj Agtjat Table Opening: Ø 50 mm Ram Surface: 310 x 250 mm Clamping Pin: Ø 35 mm Ram Stroke: 100 mm Max. Installation Height: 250 mm Table Height above Floor: 900 mm Downward Speed: approx. 480 mm/s Upward Speed: approx. 480 mm/s Working Speed: 20 mm/s Hydraulic Tank Capacity: 110 liters Hydraulic Operating Pressure at 20 tons: 200 bar Motor Power: 4 kW Power Supply: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light barrier, Type LVU, with single- and double-stroke and safety function - Rapid traverse and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable fixed stop - Pressing force manually adjustable via knurled wheel - Control cabinet mounted on side of the machine - Operating manual and electrical wiring diagram included - Stroke counter Required space (L x W x H): 1250 x 750 x 2000 mm Weight: 1.4 tons Good condition.

Stanje: dober (rabljeno), Kód: 0328 Značka: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE standard Hidravlična stiskalnica za kompozitne materiale in masivne površine, kalupe in dekorativne plošče, primerna za uporabo v letalski, letalsko-vesoljski, lesarski, pohištveni, notranjeoblikovalski, avtomobilski, ladjedelniški, gradbeni, energetski, obrambni, športni in javnoprevozni industriji ter drugih področjih – CE standard – Leto izdelave 2005 Tehnični podatki: Št. masivnih jeklenih plošč: 5 kosov (1450 x 500 mm) Št. batov: 3 kosi Ogrevanje z diatermičnim oljem Skupni pritisk: 420 ton Delovni diagram – glej priložen diagram Največja moč: 9,3 kW Polna obremenitev toka: 19 A Iedpeyuyl Isfx Agtjat Rezervoar za olje se nahaja na vrhu stiskalnice ter ima kontrolno steklo za preverjanje nivoja olja Regulator temperature tekočine (olja) Dvoročno upravljanje za zapiranje stiskalnice Varnostne svetlobne pregrade (fotocelice) Fiksni varnostni zaščitni pokrovi

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload Iaedpjxbzptefx Agtot * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 60 mm, radij upogibanja (maks.): 200 mm, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS Steel tube capacity: 60 x 3 mm Easy one-touch control allows any operator to program the bending angle and automatically save it. Single bending speed Iodpfx Agjvn Euqotsat Initiate the bending cycle from the control panel or via the integrated foot pedal Designed on a cabinet with wheels and handles for easy mobility.