Handelsagentur Klaus Benecke Durchlaufanlage Taktverfahren Automat. nakup rabljenega (20.536)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 30.000 mm, skupna višina: 4.300 mm, skupna širina: 6.500 mm, teža obdelovanca (maks.): 100 kg, temperatura: 220 °C, ogrevalna zmogljivost: 80 kW (108,77 KM), višina obdelovanca (maks.): 1.200 mm, dolžina obdelovanca (maks.): 2.500 mm, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 800 mm, The continuous processing system consists of the following components: - Chemical pre-treatment via spraying - Dryer - Powder coating system Klsdpfeum Uflox Al Nor - Powder curing oven - Conveyor technology (indexing mode) - Electrical control system

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 88 kW (119,65 KM), temperatura: 220 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), višina obdelovanca (maks.): 1.500 mm, dolžina obdelovanca (maks.): 500 mm, izolacijski material: Steinwolle, debelina izolacije: 150 mm, širina obdelovanca (maks.): 500 mm, Scope of delivery: 1. Chemical pre-treatment by spraying (in intermittent operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Conveyor system, semi-automatic 6. Electrical control system Hall / Footprint System footprint max. 12,000 x 6,500 mm Hall floor: Industrial concrete floor Workpiece sizes Max. part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Part spectrum: Steel Conveyor system P&F chain conveyor in intermittent operation, semi-automatic Pre-treatment Chemical Supply requirements Electricity: On-site supply (max. 88 kW) Gas: On-site supply Compressed air: On-site supply Water: On-site supply Specification System type: Intermittent operation system Conveying speed: 3.2 meters / min Stroke length per cycle: L = 1,600 mm Cycle movement time: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Cycle standstill time: Ts = 8.5–12 minutes Kledpfx Aleulwg Nj Nsr Total cycle time: Tt = Tm + Ts = 9–12.5 min Electrical energy: Total power 88 kW Min. average consumption: 60 kWh Max. average consumption: 70 kWh

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, skupna širina: 2.100 mm, moč: 3 kW (4,08 KM), priključek za stisnjen zrak: 6,5 letvica, volumenski pretok: 6 m³/h, Open Spray Booth 2x2.1x2.2 Klsdpfx Aefhv Tqsl Nsr Overspray during powder coating is captured by the extraction unit. The powder spray booth is delivered on castors, making it mobile. - The extraction system is equipped with a 60 L powder container (mobile). - The extraction unit contains 4 filters as the first stage. - The absolute filter is located above the booth. 1 Powder booth dimensions Width 2,000 mm Depth 2,100 mm Height 2,200 mm 2 Fan 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. Filter cartridge type 4 Electromagnetic valves 2 pcs. 1” “Turbo” Italy 5 Absolute filter 1 pc. Bag filter type

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 700 kg, višina obdelovanca (maks.): 2.300 mm, dolžina obdelovanca (maks.): 6.000 mm, izolacijski material: Mineralwolle, debelina izolacije: 150 mm, širina obdelovanca (maks.): 2.000 mm, Complete system with chemical pre-treatment (7 zones) for GSB certification (QUALICOAT) (multi-metal compatible) All dimensions and additional changes can be considered during design and planning. The offer includes the following components: - Pre-treatment cabin including reverse osmosis system - Walk-in coating booth - Powder gun - Powder curing oven - Dryer - Manual conveyor system - Lifting/lowering station - Electrical control Details: 1. Walk-in cleaning cabin, pre-treatment for steel and aluminium The cleaning cabin is designed for automatic cleaning. Spraying can be performed at medium pressure. The cabin includes 7 separate spray tanks. Maximum part sizes: L= 6000mm, W= 2000mm, H= 2300mm. 1 Cabin dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Complete pre-treatment dimensions Length 6,600 mm Width 4,640 mm Height 4,300 mm 1st process: Degreasing/neutral pickling Heated tank, 50-55°C, duration 3-6 minutes, drip-off time 80 seconds 2nd process: Acidic mineral pickling Heated tank, 50-55°C, duration 3-6 minutes, drip-off time 80 seconds 3rd process: Rinse 1 In this chamber, rinsing is performed at ambient temperature, time: 0.75–1.5 minutes, drip-off time: 1 minute 4th process: Rinse 2 In this chamber, rinsing is performed at ambient temperature, time: 0.75–1.5 minutes, drip-off time: 45 seconds 5th process: Rinse 3 In this chamber, rinsing is performed at ambient temperature, time: 0.75–1.5 minutes, drip-off time: 45 seconds 6th process: Nano-ceramic In this process, work is performed at ambient temperature, time: 0.75–1.5 minutes, drip-off time: 60 seconds 7th process: Overhead spray ring for post-rinse after process 6 In this process, rinsing is performed at ambient temperature, time: 1 minute, drip-off time: 60 seconds 8th process: Passivation, no-rinse for aluminium In this chamber, rinsing is performed at ambient temperature, time: 2–3 minutes, drip-off time: 1–2 minutes 1.1. Reverse osmosis system Reverse osmosis system, 250 litres/hour. 1.2. Oil skimmer Tank no. 1 is equipped with an oil skimmer “UniSkim-21-100”. Setup: The spray system is two-part and movable and is operated by a pneumatic sliding system, moving up to 500 mm. The return supply to the tanks is also mobile via a pneumatic sliding system with 7 positions to service the 7 tanks. 2. Walk-in coating booth 1 Cabin dimensions Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Cabin dimensions incl. extraction Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for loading/unloading of workpieces, and an additional side door for the operator. 3. Powder coating system Wagner, manual system "Sprint 2 B" 4. Powder curing oven 1 Internal dimensions Length 6,500 mm 2 Internal dimensions Width 2,200 mm Kedpjffv Tpefx Al Nelr 3 Internal dimensions Height 3,416 mm 5. Dryer 1 Internal dimensions Length 6,500 mm 2 Internal dimensions Width 1,200 mm 3 Internal dimensions Height 3,416 mm 6. Manual conveyor system The conveyor system consists of: The conveyor system is designed for a truss weight of 700 kg; the trolley carries a maximum of 2,000 kg across 3 rails.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.636 mm, skupna širina: 2.300 mm, teža obdelovanca (maks.): 200 kg, moč: 2,2 kW (2,99 KM), temperatura: 220 °C, ogrevalna zmogljivost: 39 kW (53,03 KM), notranja dolžina: 3.225 mm, notranja širina: 1.400 mm, notranja višina: 2.000 mm, višina obdelovanca (maks.): 1.600 mm, dolžina obdelovanca (maks.): 3.000 mm, volumenski pretok: 4,5 m³/h, gorivo: elektrika, izolacijski material: Steinwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 1.200 mm, Powder Coating Booth – Open Spray Stand Powder Stand Dimensions Width: 2,000 mm Depth: 2,100 mm Height: 2,200 mm Fan 1 unit – 6,000 m³/h Power: 3 kW (electric motor) Filter 4 units – Cartridge filter type (Ø325 x 600 mm each) Electromagnetic Valves 2 units – 1" Turbo, Italy Absolute Filter 1 unit – Pocket filter type Powder Coating Gun Wagner “Prima Sprint” Power Supply: Standard 230 VAC Frequency: 50–60 Hz Input Compressed Air: 6–8 bar Output Air Flow: 0.05 – 5.5 Nm³/h Powder Curing Oven Internal Dimensions Length: 3,225 mm Width: 1,400 mm Height: 2,000 mm Insulation: Rock wool 150 mm [75 kg/m³] Max Temperature: 220°C Fans: 1 unit – 4,500 m³/h Electric Motors: 1 unit – 1.5 kW, 1450 rpm, 3-phase, 50 Hz Thermal Power: 39 kW Double doors: 2 units – Manually operated, insulated with rock wool 150 mm 70 kg/m³ Klodpsb Dxnwsfx Al Nor Heating: Indirect via thermoblock, heat chamber tube heat exchanger Burner*: 1 unit – Electric heating Steel Beam for Conveyor Fixing: IPE 80 *Optionally available with gas, oil, or hybrid heating at extra cost Conveyor System: Manual Subframe: Steel profiles (IPE and SQ) Bends 9040C, 90°, radius 600 mm – 4 units Rail System Nr. 9040 – 27 m Trolley 9842 GLRHT – 16 units Connectors 9041 M – 12 units Mounting Clamps 9047/100 – 16 units Manual Switches, 45°, 9401 AIYM – 2 units Carriers, L = 1000 mm – 8 units

Stanje: novo, Leto izdelave: 2025, Four d'étuvage de poudre 3 500 x 1 900 x 2 000 mm 1 Dimensions intérieures Longueur 3 500 mm 2 Dimensions intérieures Largeur 1 900 mm 3 Dimensions intérieures Hauteur 2 000 mm 4 Sous-structure 1 set Profilés en acier 5 Parois 1 set Tôles galvanisées double face 1 mm, extérieur RAL 6 Isolation murs, plafond 1 set Laine de roche 150 mm 75 kg/m² 7 Sol Four équipé de 2 rails d'accès pour chariots à étagères 8 Température 220°C 9 Ventilateurs 1 pc. 7 500 m³/h 10 Moteurs électriques 1 pc. 3 kW, 1450 t/min, 3 phases, 50 Hz 11 Puissance thermique 58 kW 12 Portes battantes d'un côté 2 pcs Isolées avec laine de roche 150 mm 75 kg/m² Chauffage Indirect par thermobloc 13 Thermobloc 1 set Inox AISI 316, chauffage électrique, ventilateurs et paliers résistants à la chaleur, thermobloc avec protection contre la surchauffe 14 Chauffage 1 pc. Le four est chauffé électriquement 15 Évacuation 1 pc. Préparation pour conduit d'évacuation, clapet manuel Kledpfxjfhv Tcs Al Nor

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, temperatura: 220 °C, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, Powder curing ovens in various sizes 1 Internal dimensions Length 1,500 - 6,500 [mm] 2 Internal dimensions Width 1,700 - 1,900 [mm] 3 Internal dimensions Height 2,000 [mm] 4 Base frame Steel profile 5 Walls Double-sided galvanized sheets 1mm, exterior RAL Klodpfx Ajfhv Tlsl Nor 6 Wall & ceiling insulation Mineral wool 150mm 75Kg/m² 7 Oven floor 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 pcs. 2,600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW], 1,450 [rpm], 3-phase, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Swing or sliding doors Single or double-sided 2 - 4 pcs. Insulated with mineral wool 150mm 75Kg/m² Heating Indirect via thermoblock 13 Thermoblock Stainless steel INOX AISI 316 Heating electric or gas, heat-resistant fans and bearings, thermoblock with overheating protection

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, 1. Powder Coating Booth, Open Spray Stand The overspray during powder coating is captured by the extraction unit. The powder spray stand is supplied on castors, making it mobile. - The extraction unit is equipped with a 60 L powder container (mobile on castors). - The extraction unit features four filters as the first stage. - A HEPA (absolute) filter is installed above the booth. 1. Dimensions of the Powder Spray Stand Width: 2,450 mm Depth: 2,350 mm Height: 2,700 mm 2. Fan 1 unit 6,000 m³/h Electric motor 3.0 kW 3. Filter Ø 325x800 mm 4 units cartridge-type filters 4. Electromagnetic Valves 2 units 1” “Turbo” Italy 5. HEPA (Absolute) Filter 1 unit bag-type filter 2. Powder Curing Oven 1. Internal Dimensions Length 4,000 mm 2. Internal Dimensions Width 1,500 mm 3. Internal Dimensions Height 2,200 mm 4. External Dimensions incl. Thermoblock Length 5,250 mm 5. External Dimensions incl. Thermoblock Width 2,050 mm 6. External Dimensions incl. Thermoblock Height 2,530/2,750 mm 3. Control Cabinet Klsdpsffwfxsfx Al Nor 4. Manual Conveyor System The 'Mantion System' conveyor is rated for a maximum of 250 kg per goods carrier and 750 kg per transport trolley.

Stanje: novo, Leto izdelave: 2025, Powder Coating System for Large Parts All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Cabin for chemical pre-treatment (3 zones) with spray ring - Walk-in coating booth - Powder coating gun - Powder curing oven - Manual conveyor system - Electrical control system Example: (all sizes can be customized) Space requirement: 30 x 15 meters Part size: L = 6,200 mm, W = 2,300 mm, H = 2,000 mm Walk-in cleaning booth incl. automatic spray ring 1. Booth dimensions - Length: 9,000 mm - Width: 4,500 mm Kodpfobhh Awjx Al Nolr - Height: 3,400 mm 2. Tank dimensions - Length: 1,200 mm - Width: 850 mm - Height: 1,000 mm 3. Total booth dimensions incl. tanks - Length: 9,140 mm - Width: 5,580 mm - Height: 4,200 mm Walk-in coating booth, manual coating 1. Booth size - Length: 9,000 mm - Width: 4,500 mm - Height: 3,400 mm 2. Booth size incl. extraction - Length: 10,125 mm - Width: 4,500 mm - Height: 3,400 mm Powder curing oven 1. Internal length: 6,500 mm 2. Internal width: 2,500 mm 3. Internal height: 2,950 mm 4. External length incl. thermal block: 7,600 mm 5. External width incl. thermal block: 2,800 mm 6. External height incl. thermal block: 3,100 mm Manual Conveyor System The conveyor system consists of: 1. Support structure made of steel elements, 120x120 mm / IPE 160 2. Roller carriages - No. 9862 GL, 4 pieces 3. Pneumatic accessories for locking/unlocking during transfer 4. Rail system - No. 9060, 234 meters 5. Roller carriages - No. 9862 GLHT, 24 pieces 6. Connecting pieces - No. 9061M, 34 pieces 7. Mounting brackets - No. 9067/180, 234 pieces 8. Stoppers - No. 9169, 21 pieces 9. Movable locks – No. 9601 VM, 6 pieces 10. Fixed locks – No. 9601 VF, 17 pieces Electrical Control System The electrical control unit is divided into electrical and automatic control. With it, all aforementioned units can be operated and it consists of: - PLC - 5'' color touch screen (easy view) - Modem - Thermal-magnetic circuit breakers (Telemechanique, Siemens, ABB) - Cables, brackets, pipes, etc.

Stanje: novo, Leto izdelave: 2025, Entry-Level Powder Coating Packages Starter kits or individually configured packages for getting started with self-employment in surface technology, e.g., for coating wheels: The offer includes two sample packages for starting powder coating operations or expanding existing businesses. Our focus is on tailored consultations based on the customer’s budget and requirements. Customization and special requests are standard with us. Proven, robust, and low-maintenance technologies are at the core of our offering. Set 1: - Powder curing oven, 2,000 x 1,900 x 2,000 mm (internal dimensions) - 150mm thick mineral wool wall insulation for energy-efficient and cost-effective operation - 36kW heating output for rapid heat-up times - Oil, gas, or electric heating options - 6,000 m³/h recirculation (2.2kW) for efficient heat transfer to workpieces - Up to 220°C operating temperature Powder Coating Booth (open spray booth) Booth Dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Extractor fan: 6,000 m³/h, 3.0kW electric motor for a clean working environment - Filters: 4 cartridge filters ø 325x600 mm, with interval-controlled self-cleaning - Secondary filtration via pocket filter Wagner Manual Powder Coating System “Sprint 2 B” - Latest model from premium manufacturer Wagner for outstanding coating results (other brands available upon request) Kodpobqk Nbofx Al Nslr - Corona manual spray gun - PEM-C4 Ergo - EPG-Sprint control unit - Feed device with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, 1,500 x 1,200 x 1,750 mm (internal dimensions) - 150mm thick mineral wool wall insulation for energy-efficient and cost-effective operation - 14kW heating output for rapid heat-up times - Electric heating - 2,600 m³/h recirculation (1.1kW) for efficient heat transfer to workpieces - Up to 220°C operating temperature Powder Coating Booth (open spray booth) Booth Dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Extractor fan: 2,500 m³/h, 1.1kW electric motor for a clean working environment - Filters: 2 cartridge filters ø 325x600 mm, with interval-controlled self-cleaning - Secondary filtration via pocket filter Wagner Manual Powder Coating System “Sprint 2 B” - Latest model from premium manufacturer Wagner for outstanding coating results (other brands available upon request) - Corona manual spray gun - PEM-C4 Ergo - EPG-Sprint control unit - Feed device with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni sistem za spenjanje tovora na paletah priznane nemške znamke ErgoPack. Ksdjyw Iagspfx Al Njlr Model 725E je popolnoma električna naprava, ki omogoča varno in hitro spenjanje palet brez potrebe po sklanjanju – idealno za skladišča, logistiko in proizvodnjo. GLAVNE PREDNOSTI: - avtomatsko vodenje traku okoli palete - elektronsko upravljanje 24V - načini delovanja: AUTO, MAN, SOFT - nastavitev napetosti traku - maksimalna napetost traku do 2500N - ergonomično upravljanje brez napora za operaterja - mobilna zasnova na kolesih - švicarska kakovost izdelave (Swiss Made komponente) TEHNIČNI PODATKI: - Proizvajalec: ErgoPack Deutschland GmbH - Model: 725E - Napajanje: 24V DC - Maks. napetost traku: 2500N - Stanje: rabljeno, dobro ohranjeno - Priložen polnilec STANJE: - Naprava je popolnoma kompletna. - Vidne so običajne sledi uporabe zaradi dela. - Kontrolna plošča deluje, stroj je pripravljen za uporabo. UPORABA: - skladišča - logistični centri - proizvodnja - transport in pakiranje palet

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 913017, prva registracija: 02/1991, barva: drugo, Leto izdelave: 1991, = Dodatne informacije = Dovoljena skupna masa: 38.000 kg Tehnično stanje: zelo dobro Videz: zelo dobro Cena: na zahtevo = Podatki o podjetju = Če imate vprašanja ali predloge, nas kontaktirajte brez oklevanja. Odgovor zagotovimo v roku 8 ur. Cene so brez DDV. Iz navedenih informacij ni mogoče uveljavljati nobenih pravic. Pisarna telefon: MOB: Nizozemsko - Angleško - Nemško - Francosko - Špansko - Italijansko (na voljo na WhatsApp in Viber) MOB: Nizozemsko (na voljo na WhatsApp in Viber) Pri bančnem nakazilu mora biti denar nakazan na naš spodaj naveden bančni račun. Vedno preverite plačilne podatke, navedene na naši spletni strani. Če ste prejeli druge podatke, nas, prosim, kontaktirajte. V primeru dvomov nas pokličite, da preverimo račun in/ali plačilo. Kodpeymrwtofx Al Nslr Bančni podatki: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/DDV/DAVEK: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: generalkompletno obnovljen (rabljeno), FORTUNA AUTOMAT A3 Weight range: 0.35 to 85 g Rounding function deactivated, only dividing Stainless steel blade (new) Stainless steel front and side guards Kledegg S Dhepfx Al Ner New control unit, cables, and oil – all components are new Like new, or even better… Completely overhauled, like new Includes 3 dividing plates 16 Ah connection

Stanje: delavnici obnovljeno (rabljeno), Fortuna stiskalnica za žemljice / delilni stroj za testo Gr.3, od 35 g do 85 gramov. Stroj je obnovljen in na novo pobarvan. Priloženi so 3 delovni krožniki. Kedpfxec Utkae Al Nolr Priključek 4x16 A. Stroj deluje odlično in je lahko takoj v uporabi. Za dodatna vprašanja nas prosim kontaktirajte. Hvala lepa.

Stanje: rabljeno, Leto izdelave: 1996, Tehnične podrobnosti: Teža stroja pribl.: 1750 kg Motor žage: 2,2 kW Skupna potreba moči: 5 kW Hitrost rezanja: 17 - 90 m/min Premer reza: 320 mm Maks. območje reza: 320 x 320 mm Dolžina tračnega lista: 4.930 x 34 x 1,1 mm Dolžina podajanja: max. 9x 600 mm Potrebni prostor pribl.: 2,6 x 2,4 x 1,40 m Avtomatska tračna žaga, ravni rez, min. premer reza 10 mm, min. dolžina reza 6 mm, min. dolžina ostanka 15 mm (avtomatika 80 mm), maks. masa materiala 400 kg/m, rezervoar za hladilno tekočino 60 l, zmogljivost črpalke 16 l/min, napetost vpenjanja nastavljiva 20-60 bar, Kodpfx Alovpt Eyo Nelr transporter ostružkov 2.400 x 950 mm, valjčna proga 2.200 x 950 mm, 5 kosov rezervnih tračnih listov 4.930 x 34 x 1,1 mm, navodila za uporabo

Stanje: dober (rabljeno), For sale: - Injection moulding machine, aggregate, automatic machine for the production of EPS (expanded polystyrene) form inserts – thermal boxes, fishboxes – low hours, very good condition. The machine is currently still connected to the installation, which will facilitate disassembly and marking of individual connections for the buyer. - Complete machine, ready to be connected to a steam system, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mould for the production of EPS thermal boxes and fishboxes – 3 sizes, available with or without holes, with lids – total 6 configurations. During a single production cycle, complete boxes with lids are produced – no need to change the moulds. - Included: rights to the box/fishbox design – full documentation. Note: The machine can also be used to produce EPS building elements for walls and ceilings – examples shown in the photos. We offer additional elements of the production line – check our other listings. We also have other equipment/components for sale such as: - Injection moulding machines, aggregates, automatics for the production of EPS foundation boards + board mould - EPS pre-expander - Steam installation: boiler house – machines - 3m³ steam tank Kledpoua Dqiefx Al Nsr - EPS conveying installation - EPS silos - Polystyrene crusher - Wide range of spare parts More photos and information available via email. Possibility to sell individual components of the set separately.

Leto izdelave: 2020, stanje: novo, The use of a photocell in the workpiece area allows for the measurement of its length, thereby enabling the spray guns to be activated as soon as the part enters their range and to be deactivated immediately after painting is completed. The photocell is included as standard equipment. Identification of parts with special tags. Identification plates with holes are attached to the workpiece hanger. Based on this, the PLC controller, together with the photocell, detects the painted part and switches the guns on and off at the appropriate moment, saving both energy and powder coating material. Vertical shape detection of the part: The use of light gates with horizontal sensors allows the PLC controller to analyze the vertical contour of the part. The PLC controller measures the timing in which the part is expected to enter the gun space; as a result, it becomes possible to selectively turn the spray guns on or off. The use of light gates with multiple sensors in both horizontal and vertical arrangements enables precise measurement of the part’s dimensions, making it possible to control manipulators as well. The benefits of using photocells or light gates are primarily in saving powder and energy by eliminating spraying in areas where no part is present. With light gates, precise control of the spray guns is possible. Kljdpofy T Arofx Al Njr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, številka stroja/vozila: 232597, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 320 mm, model krmilnika: SIEMENS SIMATIC HMI, dolžina tračnega lista: 5.080 mm, globina grla: 370 mm, Brez rezervne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu stroja bodisi med 11.05.2026 in 13.05.2026 bodisi med 18.05.2026 in 21.05.2026! Kledpfxoyng Ats Al Njr TEHNIČNI PODATKI Dolžina traku: 5.080 mm Višina materialne podpore: 1.200 mm Premer valja: 630 mm Iztek: 370 mm Največja višina reza: 320 mm Vodila palica (hidravlični hod): 200 mm Napenjanje traku (hidravlični hod): 60 mm Hitrost traku: 250 – 2.000 m/min PODROBNOSTI STROJA Krmiljenje: SIEMENS SIMATIC HMI Obratovalna napetost: 400 V Nazivni tok: 32 A DIMENZIJE IN TEŽA Dimenzije (D x Š x V): 2.700 x 2.500 x 2.700 mm Teža: 2.100 kg OPREMA Valjčna proga (širina valjčne proge: 350 mm) Zunanja referenca: Heraeus

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1834, skupna masa: 325 kg, premer orodja: 160 mm, višina orodja: 230 mm, kapaciteta rezervoarja za vodo: 30 l, TEHNIČNI PODATKI Največji premer orodja: 160 mm Največja višina orodja: 230 mm PODATKI O STROJU Volumen vodnega rezervoarja: 30 l Dimenzije in teža Dimenzije (D x Š x V): 675 x 765 x 1650 mm Teža stroja: 325 kg OPREMA Brusilno območje iz aluminija Siemens upravljalni portal na dotik Informacijsko polje za tekoče operacije in alarme Samodejno zaznavanje brusne višine Samodejna regulacija delovnega pritiska in hitrosti brušenja Možnost ravnega ali poševnega brušenja Predal za orodje Kakovosten brusilni kolut (CBN) Vodna pištola za čiščenje Delovna luč z različnimi barvami Vgrajen modem s priključkom za daljinsko povezavo Rezervni brusilni kolut Motor z inverterjem za trifazni tok 380 V in 220 V Kedpfx Ajyx Hwtsl Nelr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 3.370 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 40 6003, največja hitrost vretena: 12.000 obr/min, izvrtina vretena: 20 mm, prehod palice: 20 mm, model krmilnika: Fanuc 31i-B, Oprema: transportni trak za ostružke, Samo 3.370 ur vretena! TEHNIČNE PODROBNOSTI Moč vretenskega motorja: 5.500 W Največje število vrtljajev vretena: 12.000 min⁻¹ Vretenasta izvrtina: 20 mm Premer prehoda palice: 20 mm PODROBNOSTI O STROJU Klodpsyzhlqofx Al Ner Krmiljenje: Fanuc 31i-B Število osi: 9 Vretena: 2 Napajalna napetost: 400 V Dimenzije in teža Tloris: 2.000 x 1.280 mm Višina stroja: 1.720 mm Teža stroja: 3.600 kg Obratovalne ure Vklopljene ure: 32.700 h Ure vretena: 3.370 h OPREMA Vmesniki: Ethernet / RS232 / USB / PCMCIA Transporter za ostružke 3-barvna signalna svetilka Rotacijska pištola Prevzem obdelovanca Izmet obdelovanca Rezervoar za hladilno tekočino Podajalnik palic: Iemca Elite 220 (2010) Protipožarni sistem Visokotlačna enota Muller 70 bar Enota za hlajenje olja Električna shema Vzdrževalna dokumentacija Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg OPREMA Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm Klodpfx Asyzxp Tjl Njr

Stanje: novo, Leto izdelave: 2025, TVM Ø 400 – The Customizable All-Purpose Saw for Your Workshop The TVM 400 is the indispensable all-purpose saw featuring a robust construction. Designed for efficiently cutting small wood pieces, it quickly removes knots and irregularities. By simply adding accessories such as rollers and stops, the TVM 400 delivers maximum versatility and productivity (for more details, see the ACCESSORIES section). Main Features: Efficient and Cost-Effective: Ideal for small and medium-sized joineries, offering excellent value for money. User-Friendly: The machine is designed to be operated without highly skilled personnel, saving time and resources. Reliable: Always ready for use, it supports all operational requirements and minimizes downtime. Cost Optimization: With the TVM 400, you get a durable machine that requires minimal maintenance. Benefits: Operational safety for the operator thanks to a design that minimizes risks. Optimized ergonomics to boost productivity during work. Material wear compensation with no need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Compatible with CURSAL accessories for complete adaptation to production requirements. Cost/quality optimization makes this machine a smart investment. Applications: Production of semi-finished wooden furniture Manufacture of windows and doors Custom productions for various applications. Kodpfxev Iqaxs Al Nolr

Stanje: rabljeno, Leto izdelave: 1985, obratovalne ure: 35.288 h, številka stroja/vozila: 10661, skupna višina: 2.200 mm, skupna širina: 1.200 mm, skupna dolžina: 1.700 mm, stiskalna sila: 25 t, Certificirano po DGUV do: 06/2026, leto zadnje generalne obnove: 2025, À vendre, une MABU 25 VP /RC, qui, compte tenu de son âge, se trouve en bon état. La machine est actuellement toujours utilisée en production en série et fonctionne de manière fiable. Une visite ainsi qu’un essai en condition réelle sont possibles jusqu'à la semaine 18/2026 pendant la production en cours. Ceci vous offre l’opportunité de constater par vous-même la performance et le bon fonctionnement de la machine. Force nominale : 250 kN Vitesse de course : 12⅓–500 cpm Alimentation : MABU 120/150 Course réglable : 7-62 mm Entraînement principal // kW : 3,7 kW Raccordement électrique : - Course réglable : 7-62 mm Surface de table : 400 x 360 mm Hauteur d’entrée réglable : 10 mm-140 mm Ksdpsyu S Etjfx Al Nolr Largeur de bande max. : 35 mm Épaisseur de matériau max. : 1,5 mm Dimensions de la machine : 2115 x 1662 x 1190 mm Poids : 2500 kg « Entraînement principal en marche (heures réelles de fonctionnement) (compteur armoire électrique) » 35 288 h Une cabine insonorisée est disponible en option.

Stanje: rabljeno, Žagalni stroj, avtomatska žaga, avtomatski rezalni stroj, Adige CM501 – rabljeni stroj Proizvajalec: Adige Model: CM 501 Leto: 1996 Premer rezila: 250–360 mm Kledpoy Ayc Defx Al Nor Dolžina reza: 2100 mm Največji premer obdelovanca (okroglo): 85 mm Največja dimenzija obdelovanca (kvadrat): 70 × 70 mm Avtomatski krožni žagalni stroj ADIGE CM501, izdelan leta 1996 v Italiji, je zasnovan za popolnoma avtomatsko rezanje polnih materialov, cevi in profilov iz jekla, medenine, aluminija ter drugih lahkih zlitin v industrijskih proizvodnih okoljih.

Stanje: rabljeno, Rabljen avtomatski polagalec BKR Ovatta Master, širina mize 2,20 metra, skupna dolžina 10 metrov (celoten transporter). Klodpjy Ddq Iefx Al Njr