Haeusler Naprava Za Vpenjanje In Varjenje nakup rabljenega (133.594)

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Working diameter: 1800-5500 mm, working length: 1500-3000 mm, wall thickness: 10-40 mm. Ncedpfx Agenvfdusxjr

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Working diameter: 1,500–6,000 mm, working length: 1,200–3,000 mm, wall thickness: 20–70 mm. Nedpfx Aonvfdqjgxscr

Stanje: rabljeno, Spot welding tong with DALEX RS 17 controller and balancer Spot welding tong DALEX Type A 3139 Manufacturing No.: 98G 69757 Year of manufacture: 1998 Rated output at 50% duty cycle: 8 kVA Welding power max.: 22.4 kVA Open-circuit voltage: 2.9 Volt Electrode force max.: 200 daN Short-circuit current max.: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6 / 12.5 mm Nodpfx Aoyxrhdsgxjcr Electrode gap max.: 230 mm - Tong with water cooling - without cooling unit - cooling water requirement: 1.5 liters/min. - Suspension device Balancer DALEX Type D4-21 Weight of welding tong: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS No.: 0413-410 Serial No.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Squeeze, hold, off, and pause times: each 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Pulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter adjustment: via arrow keys - with solenoid valve control - Current setting via phase angle control - Welding controller in sheet metal wall cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Njdpfxeyqr Sxo Agxjcr

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Tehnični podatki: Pomik v X/Z: 100/500 mm Vpenjalna površina: 600 x 450 mm Križna miza (X/Y): 100/50 mm Ncjdpfjy Dy A Tox Agxjr Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Contracer: C-3200 Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Tehnične podrobnosti: Za tračne žage liste do širine 206 mm Merjenje tlaka v barih Pozicioniranje s premikom lista Tehnične podrobnosti: Širina lista: tračne žage 30 – 206 mm Debelina lista: 0,6 – 2,4 mm Ncsdpfxjyz Sr Uj Agxjr Dolžina lista: 4.000 – 11.000 mm Delovna hitrost: 4 – 20 m/min. Nazivna napetost: 3AC x 400V, smer vrtenja “desno“ Frekvenčni pretvornik nastavljiv po stopnjah Točna hidravlična razlika tlaka odčitana na manometru Nastavljiva tlačna ročica Planirni valj vključeno Kovaško nakovalo za popravilo vdolbin

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion Njdpfxewx Aade Agxocr potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Leto izdelave: 2002, stanje: rabljeno, Technical Details: Control: Soft-PLC Burner Heads: 1 piece Center Distance: approx. 4000 mm Rotary Table: Ø 890 mm Rotary Table: rotatable 360° Rotary Table: tiltable 130° Electrical Configuration - Voltage/Frequency: 3x400 V / 50 Hz Total Power Requirement: approx. 22 kVA Machine Weight: approx. 5.0 t Dimensions L x W x H: 5.7 x 2.4 x 2.8 m Control Cabinet Dimensions: 1600 x 640 x 1500 mm PTA Welding Plasma Coating System with 8 Axes Application: Coating of sealing plates, seat rings, cones, cone spindles, and other wear parts Powder Dosing System: - Controlled by process control system / powder quantity adjustment - Powder quantity approx. 10 kg, grain size 25µ - 500µ - Dosing quantity regulation Nedpfju Nwf Iex Agxscr Power Source: - MOSFET regulation; Pilot mode max. 200A and Transfer 300A - Digital display - Air-cooled - Control 0-10V / 0-20mA Plasma Torch: - Water-cooled - Continuous duty max. power: Pilot 100A and Transfer 300A High-Frequency Ignition Unit: - HF generator for arc ignition Gas Control System: - Process-controlled for fully automatic operation - Plasma gas system with electrically adjustable flowmeter - Gas = Argon 99.99 pure gas - Plasma gas flow rate: 0.05 - 5 l/min; Powder gas system: 0.50 - 20 l/min; Shielding gas system: 1.50 - 30 l/min Support Bracket with Rotating Center Water Cooling Unit Operating Panel Enclosure

Stanje: rabljeno, Leto izdelave: 1994, številka stroja/vozila: 00258 PE 364, Lg.Nr. 26071 Tehnični podatki: - Nosilnost: 650 kg - Dimenzije vrtljive plošče: 700 x 700 mm - Pogonska vrtljiva plošča, brezstopenjsko nagibanje: 0 - 135° - Motorni vrtilni gib, brezstopenjsko nastavljiv: 0,07 - 1,5 obr/min - Višina mize v vodoravnem položaju: 890 mm - Električni upravljalni gumb - Potreben prostor: pribl. Š 850 x V 890 x G 1200 mm - Teža: pribl. 400 kg Nodpfoy E N T Rox Agxecr

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge milling machine, manufacturer: IMAC Njdpfx Ajy A Hnmjgxjcr Year of manufacture: 1998 Model: CB 18 Series: B20

Stanje: dober (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 1501-2, Ponudba 26128 Njdoy Ec Emepfx Agxjcr Tehnični podatki: - max. nosilnost v vodoravnem položaju: 5000 kg - premer čelne plošče: 1150 mm - motorizirano nagibna čelna plošča: 0 - 130° - vrtenje električno brezstopenjsko nastavljivo - desni + levi tek - prenos varilnega toka: ca. 500 A - pogon: 400 V - višina mize v vodoravnem položaju: ca. 1220 mm - ročni daljinski upravljalnik - potrebna velikost prostora: ca. š 1350 x v 1220 x g 1900 mm - teža: ca. 3500 kg - adapter plošča s pritrditveno napravo za okrogel material

Stanje: zelo dobro (rabljeno), Pneumatic holding and clamping device by Linck. Ncsdpfx Ajrdvggjgxor

Leto izdelave: 2004, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, dolžina plošče: 3.000 mm, širina plošče: 1.200 mm, višina zlaganja: 1.600 mm, TEHNIČNI PODATKI Največja širina plošče: 1.200 mm Največja dolžina plošče: 3.000 mm Največja višina sklada plošč od tal: 1.600 mm OPREMA Sistem gibanja: priseski Vakuumska črpalka Stroj se prodaja in dobavlja v dejanskem in pravnem stanju ("videno-kupljeno") na podlagi fotodokumentacije in tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico, da blago pred prevzemom pregleda in prevzema odgovornost za montažo, varovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 7684 Nodpfxeyxnquj Agxocr

Stanje: rabljeno, sestavljeno iz: osnovnega ogrodja, 2 kos skladiščnih rezervoarjev, nerjaveče jeklo, rezervoar, proizvajalec WERIT, enota za osmozo, tip: SILHORKO, leto 1995, krmilna omara, proizvajalec RITTAL, s cevnim sistemom, filtrirno, črpalno in ventilno tehniko ter 2 kos nagibnih kadi na kolesih Ncsdpfx Ajy Aqchogxor

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Chip extraction unit CORMAK FM230A + 2.5 m hose The CORMAK FM230A chip extraction unit is a high-performance sawdust extractor designed for the efficient removal of wood chips, shavings, and dust generated during woodworking processes. This compact chip extractor is perfectly suited for joinery workshops, production plants, and home workshops where effective dust extraction at workstations is required. The model comes equipped with a flexible extraction hose, 2.5 m in length, allowing quick connection of the chip extractor to woodworking machines such as planers, table saws, spindle moulders, or thicknessers. This setup enables the dust extraction system to be easily positioned anywhere in the workshop, ensuring efficient removal of dust and chips directly from the generation source. A powerful extraction fan delivers an airflow rate of up to 1080 m³/h, ensuring fast and effective suction of wood dust and chips. Its robust construction and metal impeller guarantee stable operation, high durability, and reliability—even under intensive use in a carpentry environment. The mobile design with wheels makes it convenient to move the device between workstations, and the integrated filtration system with collection bags effectively separates the air from the wood chips. As a result, the wood dust extractor keeps the workshop clean and improves both working comfort and safety. Key Features - Includes 2.5 m Ø100 mm extraction hose - High extraction efficiency – up to 1080 m³/h - Powerful fan for wood chips and shavings - Single-phase motor 0.75 kW / 230 V - Durable metal impeller for chip extraction - Mobile design with transport wheels - Efficient filtration system for chips and wood dust - Large waste bag for extended operation - Compact design ideal for woodworking shops Applications The CORMAK FM230A chip and dust extractor is designed for use with a variety of woodworking machines that require effective dust extraction: - Planers and jointers Njdpfx Asytn Tdjgxscr - Thicknessers - Table saws - Spindle moulders - Wood sanders With its high airflow rate, the dust and chip extractor effectively removes debris generated during woodworking, improving visibility at the workplace and reducing airborne dust. Standard Equipment - CORMAK FM 230A chip extractor - 2.5 m extraction hose Ø100 mm - Filter bag - Waste bag - Clamping bands - Mobile base with wheels Technical Specifications Motor power: 0.75 kW Power supply: 230 V / 50 Hz Extraction capacity: 1080 m³/h Motor speed: 2800 rpm Vacuum: 1000 Pa Noise level: 68 dB Number of bags: 2 Suction inlet diameter: 100 mm Hose length: 2.5 m Bag capacity: 90 l Height: 1800 mm Width: 750 mm Length: 450 mm Weight: 27 kg

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. Nsdpjym Unzefx Agxjcr This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: rabljeno, Debelina pločevine 4,0 mm Ncsdpfxjy D A Eqo Agxjr Premer valja cca 120 mm Iztegnitev 450 mm Teža stroja cca 0,48 t Dimenzije cca 1,3 x 0,8 x 1,8 m

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Frisch Spritz Matic Set 6 Jet Naprava za nanašanje marelične in glazurne mase Preliv za torte in fondant Univerzalni stroj Izdelava iz nerjavečega jekla 2 posodi za material 2 pršilni postaji Ncjdsyv Uxyepfx Agxor Čiščenje z vodo Premična naprava Priključek 400V, vtič 32A-CEE Rabljena naprava iz pekarne

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: Klimatska naprava, Naprava za mešanje in doziranje vode Aquamix 32 Popolnoma avtomatska naprava za mešanje in doziranje vode z avtomatsko nadzorovanim predhodnim tokom in numeričnim vnosom Nedjygdayjpfx Agxecr Tehnični podatki: Temperaturni priključki: 3 (z ledeno vodo) Obseg doziranja: 0,1 l - 999,9 l Območje nastavitve temperature: +0,5°C do +70°C Natančnost temperature: +/-2°C Natančnost doziranja od 1 l: +/- 0,1 l Pretok vode pri 3 bar: do 30 l/min Priklop vode: 3/4" zunanji navoj Priklop elektrike: 100 - 240V; 50Hz Dimenzije naprave (Š x V x G): 300 x 300 x 170 mm Rabljena naprava Na zalogi imamo tudi druge naprave!

Stanje: novo, Leto izdelave: 2024, obremenitev mize: 2.000 kg, Welding turntable with 2000 kg load capacity with manual and foot remote control Diameter: 1200 mm Bore: 100 mm Height: 580 mm Nedpegfqk Tjfx Agxscr Stepless speed adjustment: 0 - 0.6 rpm Motor: AC 380 V

Stanje: rabljeno, Table clamping surface: 228 x 273 mm Nedsbbgcxopfx Agxjcr 3 T-slots: 12 mm Between them, 4 x 4 threaded holes: M8 Table height at zero position: 146 mm Required space: 250 x 290 mm Weight: 41 kg

Stanje: novo, Leto izdelave: 2026, Series MBM Machine • Easy start within the engine performance class Njdpfx Agowf Hghjxecr • Designed for smooth and efficient single-operator use • Produces complete profiles in a single operation and can repeat them accurately at any time • Maintenance-free, wear-free direct eccentric drive Standard Equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insert rail 68/10 mm and 68/24 mm for the folding beam • Motorized back gauge 6-750 mm • Foot switch • 16 A connecting plug with 5 m cable (within the EU) • Connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Stanje: novo, Leto izdelave: 2026, • Efficient, quiet, and powerful mechanical machine • Fast processes comparable to MAX and MAB machines • Maximum free space for material bending thanks to F-geometry for the bending beam • Possibility to produce omega profiles without additional tools • 1 upper beam rail 20°, 1 mm radius, 66/24 mm • 1 bending rail 10/100 mm and 24/100 mm • Foot pedal • Soft start for the bending beam Ncjdpfxolbilve Agxsr • Mechanical backgauge with a working range of 6-1000 mm • 32 A plug + 5 m power cable for EU • Supply voltage: 3 x 400 V, 50 Hz for EU Sheet metal bending capacity: 1.5 mm steel sheet for 3000 mm working length

Stanje: novo, Leto izdelave: 2026, • Efficient, quiet, and powerful mechanical machine • Fast processing, as with MAX and MAB machines • Capability to produce omega profiles without additional tools Nsdpfxelbimas Agxecr • 1 upper beam rail 20°, radius 1 mm, 66/24 mm • 1 bending rail 10/68 mm and 24/68 mm • Foot pedal • Soft start of the bending beam • Mechanical back gauge with working length: 6–1000 mm • 32 A plug + 5 m power supply cable for EU • Power supply: 3 x 400 V, 50 Hz for EU Sheet thickness: 1.5 mm steel sheet for 3000 mm working length

Stanje: dober (rabljeno), Load capacity: 200 kg Tipping height: 2200 mm Nodpjum Slvjfx Agxecr Container size: 800x600x550 mm