Frech W50Zn-Rc nakup rabljenega (3.474)

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm Dkjdpfxsiu Smbj Aflsr 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Dsdpsx Hp E Aefx Aflskr Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Leto izdelave: 1988, stanje: rabljeno, Platform truck, transport trolley, heavy-duty cart, table trolley, assembly trolley, industrial trailer - Industrial trailer with: single-axle turntable steering - 4 roller conveyors, rollers: Ø 65 x 365 mm - Load capacity: max. 6,800 kg - Tyres: solid rubber Dkjdpofk Smusfx Afler - Trailer coupling - External dimensions: 4,760 x 2,730 x H 585 mm - Dead weight: 1,100 kg

Stanje: zelo dobro (rabljeno), Razvijalnik FRECH 2 t x 650 mm, notranji premer koluta 240 - 270 mm, zunanji premer koluta 1500 mm Dksdpfx Aszd R Ttjfler

Stanje: novo, Leto izdelave: 2018, Crucible capacity: 420 kg As-new and unused industrial furnace for DAW20A or DAW20S. The furnace from Metec, model Z20/120C, features a durable stainless steel crucible. Crucible capacity is 420 kg, melting capacity per hour is 120 kg/h at a connected load of 21.5 kW. A suitable control cabinet can be custom-built upon request. Dsdpfxetv Rlzs Afljkr

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Tie bar diameter: 56 mm Die casting force: 55 kN Die casting stroke: 130 mm Plunger diameter: 45, 50, 55 mm Casting volume (DIN 24480): 76, 121, 165 cm² Dksdotuxmyopfx Afler Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Dedsvxlufspfx Aflskr Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 2007, used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Includes spray and blow bar (SR system with adjustable nozzles) and stand Dksdpfx Afstwfknjlor Connection: 24-pin plug Traverse module: 400 mm stroke

Stanje: rabljeno, Leto izdelave: 1999, Clamping force: 3150 kN Mounting platen: 900x900 mm Tie-bar distance: 550x550 mm Machine weight: approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mold height: 300–700 mm Tie-bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection plunger diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Djdpfx Afovfhrtoljkr Eject stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system, suitable for magnesium alloy processing. Available from used machinery stock. The machine is equipped with a Rauch electric furnace, type MMO 315E. Spray device not included. Manufacturer’s recommendation: repair or overhaul at the refurbishment facility. Scope of work can be agreed upon as required.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Zatezna sila: 3150 kN, sila otvaranja: 10.000 daN, hod za zatvaranje: 500 mm, sila izbacivača/povratna sila: 159/82 kN, hod izbacivača: 120 mm, visina alata: 300-700 mm, dimenzije steznih ploča: 900x900 mm, razmak stubova: 550x550 mm, prečnik stuba: 110 mm, pozicija livenja: mm, maks. sila livenja: 350 kN, hod livenja: 430 mm, prečnik klipa za livenje: 50/60/70/80 mm, zapremina livenja: 563/811/1103/1441 cm³, specifičan pritisak za livenje: 1783/1238/909/696 daN/cm², pripadajuća razdelna površina: 177/254/347/453 cm², maksimalna razdelna površina: 1050 cm² pri 300 daN/cm², radni pritisak: 140 bar, prazni hodovi (DIN 24480): 500, pogonski motor: 22 kW, upravljanje: Datacontrol, dužina: 6900 mm, širina: 2000 mm, visina: 2800 mm, težina: 14 t, broj radnih sati: 77.185 h, broj šuteva: najmanje 1.147.108, podatak orijentacioni zbog promene hardvera, hod otvaranja podesiv, sa peći za održavanje toplote Striko Westofen W455, industrijskim robotom ABB IRB 2400 (M96/F10) i dokumentacijom. Pregled na licu mesta je moguć. Dksdpfx Asza E Rmofljr

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Dksdpfx Afefrvzvelsr Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: rabljeno, Leto izdelave: 2017, Največja teža obdelovanca: 2000 g Djdpfx Afoy Diauslokr Rabljena tehtnica za uporabo na tlačno livarskih strojih do maksimalne teže kosa 2000 g. Demontirana iz tekoče proizvodnje. Naprava je bila pregledana in servisirana pri proizvajalcu.

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Dkodpfx Asyzt D Eofljr Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2001, Funkcionalnost: nefunkcionalno, FRECH DAK 720-71 RC tlačni livarski stroj, rabljen Številka stroja 440403, sila zapiranja 8000 kN, hod zapiranja 825 mm, sila izmeta 364 kN, hod izmeta 180 mm, višina orodja 350 do 1000 mm, velikost zapiralnih plošč 1300 x 1300 mm, razdalja med stebri 825 mm, premer stebrov 180 mm, maksimalna tlačna sila 713 kN, hod tlačnega bata 600 mm, premer tlačnega bata 70 do 120 mm, prostornina tlačenja 1539 do 4523 cm³, delovni tlak 160 bar, pogonski motor 45 kW, z doziranjem peči MELTEC AVDF 1200/5000, leto 2017, serijska številka sistem, kot donor za rezervne dele Tehnične značilnosti dimenzije (d x š x v) pribl. Dkedpfx Aewc Tdzefljr 8000 x 7500 x 3500 mm teža pribl. 36000 kg leto izdelave 2001

Stanje: dober (rabljeno), Leto izdelave: 1999, • Year of manufacture: 1999 Dkodsba Hz Uepfx Afljr • 400 V; 50 Hz • 1.5 kW • Abrasive belt: 100 x 1500 mm • Belt speed: 25 m/sec • Required space (W x D x H): 800 x 55 x 110 cm • Weight: approx. 50 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Dkedpfx Afeucfwpoljr

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, Used Oskar Frech DAW 125 with control cabinet and crucible Dodewywn Espfx Afljkr

Leto izdelave: 2024, stanje: novo, The RC 300 roll crusher is ideally suited for the comminution of medium-hard, brittle, and hard materials such as coal, ores, slag, minerals, graphite, bitumen, and many more. Dedpfxsiamtte Aflskr

Leto izdelave: 2024, stanje: novo, The roll crusher RC 200 is ideally suited for crushing medium-hard, brittle, and hard materials such as coal, ores, slag, minerals, graphite, and many more. Max. feed size* Dkedpfxjf Ulyco Afljr

Leto izdelave: 2024, stanje: novo, The RC 100 roll crusher is ideally suited for the size reduction of soft, medium-hard, brittle, and hard materials such as coal, ores, slags, minerals, graphite, bitumen, and many more. Djdpfeiamtajx Afljkr

Stanje: rabljeno, Leto izdelave: 2021, nosilnost: 4.000 kg, dvižna višina: 4.000 mm, skupna dolžina: 4.000 mm, - Travel speed with/without load: 24 km/h - Plastic cabin roof, heater - Number of valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load, loaded: 10,780/1,360 kg - Axle load, unloaded: 3,300/4,060 kg - Track width: 1,180 mm - Track width: 1,190 mm - Mast/Carriage tilt (α/β degrees): 6/12 - Seat height rel. to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for pallets 1000 x 1200 (crosswise): 4,597 mm - Aisle width for pallets 800 x 1200 (lengthwise): 4,797 mm - Turning radius: 2,830 mm - Minimum pivot point distance: 900 mm - Travel speed loaded/unloaded: 22/24 km/h - Lifting speed loaded/unloaded: 0.45/0.49 m/s - Lowering speed loaded/unloaded: 0.38/0.26 m/s Dksdsztgfqspfx Afljr - Drawbar pull loaded/unloaded: 28/21 kN - Gradeability loaded/unloaded: 20%/20% - Service brake: mechanical/hydraulic - Rated speed: 2,200 l/min - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emission standard according to EU Regulation 2016/1628 Stage III a - Onboard voltage: 12 V - Drive type: torque converter - Operating pressure for attachments: 200 bar - Oil flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Tow coupling: DIN 15170 pin type

Stanje: rabljeno, Leto izdelave: 2021, nosilnost: 5.000 kg, dvižna višina: 3.330 mm, skupna dolžina: 4.400 mm, · Travel speed (with/without load): 24 km/h · Plastic cabin roof, heater · Axle load (laden) kg: 10,780 / 1,360 · Axle load (unladen) kg: 3,300 / 4,060 Dkedpfx Afjxl Hn Nsljr · Mast/carriage tilt angle α/β: 6/12 ° · Mast height extended: 4,275 mm · Height over overhead guard (cabin): 2,260 mm · Seat height relative to SIP/stand height: 1,315 mm · Coupling height: 380 mm · Fork dimensions ISO 2331: 55/150/1070 mm · Fork carriage ISO 2328, class/type: A, B IIIA · Fork carriage width: 1,380 mm · Ground clearance (laden, below mast): 145 mm · Ground clearance (center of wheelbase): 180 mm · Aisle width for pallets 1000 x 1200 crossways: 4,597 mm · Aisle width for pallets 800 x 1200 lengthways: 4,797 mm · Turning radius: 2,830 mm · Minimum pivot point distance: 900 mm · Travel speed laden/unladen: 22/24 km/h · Lifting speed laden/unladen: 0.45/0.49 m/s · Lowering speed laden/unladen: 0.38/0.26 m/s · Tractive force laden/unladen: 28/21 kN · Gradeability laden/unladen: 20/20 % · Service brake: Mechanical/hydraulic · Acceleration time: Kohler KDL2504 · Engine output per ISO 1585: 55.4 kW · Rated speed: 2,200 rpm · Number of cylinders: 4 · Displacement: 2,482 cm³ · Emissions standard per EU Regulation 2016/1628 Stage III a · On-board voltage: 12 V · Drive unit type: Torque converter · Hydraulic pressure (attachments): 200 bar · Hydraulic flow (attachments): 101 L/min · Fuel tank capacity: 90 L · Tow hitch type: DIN 15170 pin

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, Leto izdelave: 2005, Ratzinger RC 12 Udarnik drobilnik, Bohringer RC12 + B1000 L15000 Transportni trak Drobilnik v celoti prenovljen Drobilnik nameščen na hidravličnem podvozju, zelo enostaven za transport. Drobilnik peskan in prebarvan POPOLNOMA NOV transportni trak L15000 Premer rotorja [mm]: 1100 Vhod [mm]: 1220x900 Dkedpfx Asy Uh Swefljr Največji vhodni material [mm]: 600 Elektromotor drobilnika: 132 kW Elektromotor stranskega transportnega traku: 5,5 kW Elektromotor glavnega transportnega traku: 4,5 kW Elektromotor vibratorja: 7,5 kW Elektromotor transportnega traku L15000: 7,5 kW Nastavitev razmika [mm]: 0-20 do 0-100 - hidravlično nastavljivo Zmogljivost [t/h]: 100 do 250, odvisno od materiala in pridobljene frakcije Drobilnik opremljen s stranskim transportnim trakom s predsejanjem Teža drobilnika: 31.000 kg Teža transportnega traku: 1.500 kg Drobilnik je 100% delujoč in pripravljen za obratovanje. Obloge drobilnika so 90% uporabne. Drobilnik je bil popolnoma prenovljen, z novimi ležaji in novo električno napeljavo. Udarna letva obrnjena.

Stanje: rabljeno, številka stroja/vozila: 14016, Premer rotorja: 530 mm Djdpfsyuz Dxex Aflekr Širina rotorja: 1000 mm Rezila rotorja: 4 x 2 Rezila statorja: 2 Prečni prerez dovoda pribl. 700 x 1000 mm Pogonski motor: 90 kW

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 5 h, nosilnost: 230 kg, lastna masa: 8.100 kg, gradbena višina: 2.530 mm, vrsta goriva: dizel, skupna dolžina: 7.770 mm, vrsta pogona: Diesel, doseg roke: 10.600 mm, gradbena širina: 2.300 mm, delovna višina: 17.650 mm, Členkasta teleskopska dvižna ploščad Dkodszr Shuopfx Afljr Menjalnik: Hidrostat Tehnično stanje: Novo Prednje pnevmatike tip: Polna guma Prednje pnevmatike velikost: 18 Prednje pnevmatike stanje: 80 - 100 % Zadnje pnevmatike tip: Polna guma Zadnje pnevmatike velikost: 18 Zadnje pnevmatike stanje: 80 - 100 % Opis: Členkasta ploščad 180 ATJ ima nosilnost 230 kg pri delovni višini 18,19 m. Izpolnjuje vse zahteve za delo na prostem na neravnih, nagnjenih in oviranih površinah. Zaradi svoje terenske zmogljivosti je idealen delovni partner na gradbiščih z neravnimi tlemi. Nova večstopenjska hidravlična regulacija vrtljajev zmanjšuje raven hrupa in porabo goriva. Kot pri drugih delovnih ploščadih z motorjem z notranjim zgorevanjem olajšujejo štirikolesni pogon in trije načini krmiljenja premikanje in postavitev stroja na gnečih ali ozkih gradbiščih. Pregledno upravljalno konzolo omogoča jasno delovno okolje za hitro uporabo in takojšnjo produktivnost.