Frech Daw 125 nakup rabljenega (3.832)

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, Used Oskar Frech DAW 125 with control cabinet and crucible Cgjdpswywn Eefx Ahxjt

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Cedpfx Ahofrvzvexogt Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: Cjdpfjyzt D Esx Ahxjgt - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Csdjvxlufjpfx Ahxegt Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Tie bar diameter: 56 mm Die casting force: 55 kN Die casting stroke: 130 mm Cgodpfxetuxmys Ahxst Plunger diameter: 45, 50, 55 mm Casting volume (DIN 24480): 76, 121, 165 cm² Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: novo, Prodam novo centrifugalno črpalko KSB ETABLOC GN 65-125 z motorjem Siemens 5,5 kW. Naprava je iz skladiščne zaloge – v zelo dobrem stanju, neuporabljena. Črpalke serije KSB ETABLOC so visokokakovostne industrijske črpalke, namenjene uporabi v vodnih sistemih, ogrevalnih in hladilnih sistemih, tehnoloških instalacijah ter v industriji. Trdna konstrukcija in blagovna znamka Siemens kot motor zagotavljata visoko zanesljivost in dolgo življenjsko dobo naprave. Tehnični podatki črpalke Cgjdjyuqxrspfx Ahxst • Proizvajalec: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Zmogljivost: 18 – 136 m³/h • Dvižna višina: 11 – 19,2 m • Hitrost vrtenja: 2.900 obr/min Motor • Proizvajalec: Siemens • Tip: 1LA7130-2AA66 • Moč: 5,5 kW • Napajanje: 400 / 690 V • Zaščita: IP55 • Ohišje: B35 Črpalka s prirobničnimi priključki – pripravljena za vgradnjo v sistem.

Stanje: dober (rabljeno), Busch SE 125 obračalnik skladov Stroj je kot nov, popolnoma funkcionalen in pripravljen za uporabo. Obračalnik je iz nemškega podjetja Busch. Csdpfx Aey Ehiqshxjgt Gre za aktualni model v proizvodnji. Tehnične specifikacije: Format: 1200 x 800 mm Višina sklada: 1350 mm Nosilnost: 1000 kg Teža naprave: 850 kg Napajanje: 380 V Upravljanje s krmilne plošče, hitra operacija, hidravlični pogon. Tiho delovanje. Kompaktna zasnova, prihranek prostora. Priložena dokumentacija.

Stanje: rabljeno, Leto izdelave: 2017, Največja teža obdelovanca: 2000 g Rabljena tehtnica za uporabo na tlačno livarskih strojih do maksimalne teže kosa 2000 g. Demontirana iz tekoče proizvodnje. Naprava je bila pregledana in servisirana pri proizvajalcu. Cgjdpfxsy Diauo Ahxst

Stanje: dober (rabljeno), Busch SE 125 (175) Obračalec skladov Stroj je kot nov, popolnoma funkcionalen in pripravljen za uporabo. Proizveden leta 2017. Ta obračalec je nemškega proizvajalca Busch. To je aktualni model v proizvodnji. Povišana višina sklada do 175 cm. Tehnične specifikacije: Format: 1250 x 900 mm Višina sklada: 1750 mm Nosilnost: 1200 kg Teža naprave: 1000 kg Napajanje: 380 V Cgjdpfjy Ah Hwex Ahxst Krmilna plošča, hitra uporaba, hidravlični pogon. Tiho delovanje. Kompaktna konstrukcija, prihranek prostora.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Proizvodna linija Weinig CONTUREX C 125, letnik 2018 Codpsy Emrksfx Ahxsgt

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrtljajska hitrost (min.): 2.840 obr/min, volumenski pretok: 3.240 m³/h, stiskanje: 10.000 Pa, moč: 18 kW (24,47 KM), High-pressure radial fan, dust extraction fan, pressure fan, vacuum fan, radial fan, high-pressure fan Spellna VRU 15-125-30H3 Condition: Used Cgodpfxoticdlo Ahxst Impeller: Forward-curved steel, direct drive, 700 mm Drive motor: 18 kW p1: 1.2 kg/m³ Pressure: 7,500–9,000 Pa Speed: 2,950 rpm Airflow: 3,240 m³/h Volume output: 0.9 m³/s Pressure point: 100 mbar Inlet connection: Ø 300 mm Outlet connection: Ø 200 mm Dimensions: 1,400 x 1,400 x 960 mm Weight: 350

Stanje: zelo dobro (rabljeno), Profesionalni digitalni mikrometer priznane znamke Mahr – model Micromar 40 EWR(i) – namenjen izjemno natančnim meritvam z nat natančnostjo do 0,001 mm. Naprava v izvedbi IP65, odporna na prah in vodo, idealna za uporabo v metrologiji, kontroli kakovosti in industrijskih delavnicah. . Merilno območje: 100 – 125 mm . Natančnost: 0,001 mm . Digitalni prikaz z velikim, preglednim LCD zaslonom . Zaščitna stopnja: IP65 – odpornost na prah in škropljenje . Funkciji „ABS“ in „Hold“ – hitro zaustavljanje merjenja in funkcija ničljenja . Visoka togost ohišja, ergonomski oprijem . V kompletu originalna škatla, certifikat, navodila za uporabo ter 100 mm merilni vzorec . Stanje: praktično novo / uporabljeno samo za testiranje Cjdexl Rgiepfx Ahxegt

Leto izdelave: 1981, stanje: zelo dobro (rabljeno), Obročno ploščo premer 1300 mm maksimalni premer struženja 1100 mm obseg premera struženja 460–1250 mm Cgedpfsk Dz N Iox Ahxjt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Cgodpfx Aeucfwpshxjt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner, 10,500 kW, oil + gas. Year of manufacture: 2013. Cgsdpfx Ajvrkcnshxst

Stanje: dober (rabljeno), Hollow spindle stop Diameter 125 mm Cedpfx Ahedbc E Nexogt Weight 6.6 kg

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Codpfx Asx Hp E Aohxegt Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs Cgsdpfsiu Smbox Ahxot 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: novo, Leto izdelave: 2018, Crucible capacity: 420 kg As-new and unused industrial furnace for DAW20A or DAW20S. The furnace from Metec, model Z20/120C, features a durable stainless steel crucible. Crucible capacity is 420 kg, melting capacity per hour is 120 kg/h at a connected load of 21.5 kW. Cgodstv Rlzopfx Ahxjt A suitable control cabinet can be custom-built upon request.

Stanje: rabljeno, Leto izdelave: 2007, used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Includes spray and blow bar (SR system with adjustable nozzles) and stand Csdpfx Ahstwfknjxogt Connection: 24-pin plug Traverse module: 400 mm stroke

Stanje: novo, Leto izdelave: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection piston diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 bar Cgsdsr Hwf Aopfx Ahxst Corresponding parting plane: 226, 274, 326 cm² Ejection stroke: 220 mm Machine Features: 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side (left) 1.4.0 Machine mounts 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill injection system 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop in return stroke 3.5.2 Electric nozzle and shot chamber heating 3.5.3 Plug-in connectors for electric nozzle and shot chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 DATADIALOG–RC machine control 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on swing arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.3 Spray rail CR 275

Stanje: dober (rabljeno), Technical data for pallet racking beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, used Material colour: RAL 2004 orange Box profile: 125 x 50 mm Beam type: PNB0485/1.5 Connector: 4 hooks Clear span: 3,600 mm Max. load per beam pair: 1,832 kg with evenly distributed load 02x Safety pins, used Cedpfx Ajlvrg Rohxjgt Version: fully galvanised For securing the beams against unintentional lifting

Leto izdelave: 1988, stanje: rabljeno, Platform truck, transport trolley, heavy-duty cart, table trolley, assembly trolley, industrial trailer - Industrial trailer with: single-axle turntable steering - 4 roller conveyors, rollers: Ø 65 x 365 mm - Load capacity: max. 6,800 kg - Tyres: solid rubber - Trailer coupling Cgodsfk Smujpfx Ahxjt - External dimensions: 4,760 x 2,730 x H 585 mm - Dead weight: 1,100 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.225 kN, model krmilnika: CC100, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! TEHNIČNI PODATKI Zapiralna sila: 125 t Horizontalni cilinder: 35 Vertikalni cilinder: 18 PODROBNOSTI O STROJU Krmiljenje: CC100 Cgedpfoy Exc Iex Ahxjt OPREMA 1x hidravlični izvlek jedra BAP 1x proporcionalni hidravlični priključek za indeksno ploščo BAP 16x grelnih con (HK) 2x magnetni vpenjalni plošči za BAP in FAP Opomba: Pri nakupu več artiklov z iste lokacije (glejte ponudbe spodaj) se obračunajo ugodnejši stroški demontaže in nakladanja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.225 kN, premer vijaka: 30 mm, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! TEHNIČNI PODATKI Zapiralna sila: 125 t Premer polža: 30 mm Opomba: Pri nakupu več artiklov z iste lokacije (glejte ponudbe spodaj) vam bodo zaračunani ugodnejši stroški demontaže in nakladanja. Cgjdpfxoy Exago Ahxet