Fassi F135 F235 F255 F545 Sofort Verfügbar nakup rabljenega (1.147)

Stanje: novo, Takoj na voljo: žeravi Fassi v različnih izvedbah: - Fassi F135 A.0.24 (štiridelni hidravlični izteg) - Fassi F235 A.2.24 (štiridelni hidravlični izteg) - Fassi F235 A.2.26 (šestdelni hidravlični izteg) - Fassi F255 A.2.24 (štiridelni hidravlični izteg) - Fassi F255 A.2.26 (šestdelni hidravlični izteg) - Fassi F545 RA2.28 (osmodelni hidravlični izteg), vključno z dodatnimi oporniki Vsak žerav je opremljen z visoko kakovostno opremo: - Krmilni sistem za 2 dodatni funkciji z »2 vodiloma za npr. grablje ali klešče (5. in 6. krmilni krog), razen pri modelu F545 - Hidravlične oporne noge/opore, ki se upravljajo preko brezžičnega daljinskega upravljalnika - LED delovne luči - Brezžični daljinski upravljalnik Scanreco s križnim ročajem, polnilnikom in nosilnimi pasovi - Elektronska naprava za izklop ob preobremenitvi - Izklop v sili, kot tudi optični alarm (90 % in 100 %), vključno z nastavljivo digitalno omejitvijo giba - Sistem za nadzor stabilnosti FASSI FSC, vključno z LMB II - Od modela F235 dalje: dvojni vzvodni sistem z iztegljivo roko do 15° - Ročni podaljški za 5. in 6. izteg so na voljo za doplačilo (vsak žerav se naroči individualno) - Pri seriji Fassi F545 = vključno s pripravami za vgradnjo vitla (V30 vito je mogoče vgraditi kadarkoli) Itodpfjzln T Hjx Agfsl Individualno financiranje je mogoče pri enem od naših partnerjev. To je nezavezujoča ponudba. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. = Dodatne informacije = Cena: Na zahtevo.

Stanje: novo, Takoj na voljo je žerjav Fassi v različnih izvedbah: - Fassi F135 A.0.24 (štiridelni hidravlični podaljšek) - Fassi F235 A.2.24 (štiridelni hidravlični podaljšek) - Fassi F235 A.2.26 (šestidelni hidravlični podaljšek) - Fassi F255 A.2.24 (štiridelni hidravlični podaljšek) - Fassi F255 A.2.26 (šestidelni hidravlični podaljšek) Itedpfjzln Tmex Agfjl - Fassi F545 RA2.28 (osmidelni hidravlični podaljšek), vključno z dodatnimi oporniki Vsaka izvedba ima izjemno dobro opremo: - Nadzorni sistem za 2 dodatni funkciji z »2 vodiloma za cevi za npr. grabiljo ali klešče (5. in 6. nadzorni krog), razen pri modelu F545 - Hidravlične oporne noge / oporniki, ki se upravljajo preko daljinskega upravljalnika - LED delovna luč - Daljinski upravljalnik Scanreco s križnim ročajem, polnilnikom in pasovi za nošenje - Elektronska naprava za izklop ob preobremenitvi - Izklop v sili in optični alarm (90 % in 100 %), vključno z nastavljivim digitalnim omejevalnikom giba - Sistem za nadzor stabilnosti FASSI FSC, vključno z LMB II - Pri modelih F235 in večji je serijsko vgrajen dvostopenjski mehanizem z možnostjo prekomernega iztegnitve roke do 15° - Možna je namestitev ročnih podaljškov za 5. in 6. podaljšek, vendar ob dodatčnem plačilu (za vsak žerjav se naroči posebej) - Pri modelih Fassi F545: vključno z možnostjo namestitve vitla (vitlo V30 je mogoče v celoti namestiti kadarkoli) Možna je individualna finančna ureditev pri enem od naših finančnih partnerjev. To je neobvezna ponudba. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. To je neobvezna ponudba. Veljajo pogoji predhodne prodaje, morebitne napake in spremembe. = Dodatne informacije = Cena: Na zahtevo.

Stanje: novo, Takoj na voljo žerav Fassi v različnih izvedbah: - Fassi F135 A.0.24 (štiridelni hidravlični podaljšek) - Fassi F235 A.2.24 (štiridelni hidravlični podaljšek) - Fassi F235 A.2.26 (šestidelni hidravlični podaljšek) - Fassi F255 A.2.24 (štiridelni hidravlični podaljšek) - Fassi F255 A.2.26 (šestidelni hidravlični podaljšek) - Fassi F545 RA2.28 (osmidelni hidravlični podaljšek), vključno z dodatnim opornim nosilcem Vsak žerav je opremljen z izjemno kakovostno opremo: - Krmilni sistem za 2 dodatni funkciji z »2 vodili za cevi, npr. za klešče ali objemalke (5. in 6. krmilni krog), razen pri modelu F545 Itodpfxjzln Tto Agfel - Hidravlične oporne noge/opore, ki se upravljajo z daljinskim upravljalnikom - LED delovna luč - Daljinski upravljalnik Scanreco s križnim ročajem, polnilnikom in nosilnimi trakovi - Elektronska naprava za izklop pri preobremenitvi - Izklop v sili ter optični alarm (90 % in 100 %), vključno z nastavljivo digitalno omejitvijo vrtenja - Sistem za nadzor stabilnosti FASSI FSC, vključno z LMB II - Od modela F235 naprej dvojni sistem ročic z možnostjo podaljšanja roke do 15° - Ročno podaljšanje za 5. in 6. podaljšek je možno proti doplačilu (vsak žerav se naroči individualno) - Pri seriji Fassi F545 = vključno s pripravo za vgradnjo vitla (V30 vitle je možno vgraditi kadarkoli) Možna je individualna financiranje pri enem od naših partnerjev. To je nezavezujoča ponudba. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. = Dodatne informacije = Cena: Na povpraševanje

Stanje: novo, Takoj na voljo žerav Fassi v različnih izvedbah: Isdezln Tyjpfx Agfotl - Fassi F135 A.0.24 (štiridelni hidravlični podaljšek) - Fassi F235 A.2.24 (štiridelni hidravlični podaljšek) - Fassi F235 A.2.26 (šestidelni hidravlični podaljšek) - Fassi F255 A.2.24 (štiridelni hidravlični podaljšek) - Fassi F255 A.2.26 (šestidelni hidravlični podaljšek) - Fassi F545 RA2.28 (osmidelni hidravlični podaljšek), vključno z dodatnimi oporniki Vsak model ima zelo dobro opremo: - Krmilni sistem za 2 dodatni funkciji z »2 vodili za cevi, npr. za klešče ali objemke (5. in 6. krmilni krog), razen pri modelu F545 - Hidravlične oporne noge / oporniki, ki se upravljajo preko brezžičnega daljinskega upravljalnika - LED delovne luči - Scanreco brezžični daljinski upravljalnik s križnim ročajem, polnilnikom in nosilnimi pasovi - Elektronska naprava za izklop ob preobremenitvi - Izklop v sili in optični alarm (90 % in 100 %), vključno z nastavljivo digitalno omejitvijo vrtenja - Sistem za stabilnost FASSI FSC vklj. LMB II - Od modela F235 dalje: dvodelni sistem ročice z možnostjo prekomernega izteza roke do 15° - Ročni podaljški za 5. in 6. podaljšek možni proti doplačilu (za vsako žerav individualno naročilo) - Pri seriji Fassi F545 = vključno s pripravo za vrvno vitlo (vrvno vitlo V30 je mogoče kadar koli v celoti namestiti) Možna je individualna financiranja s pomočjo enega od naših partnerjev. To je neobvezna ponudba. Pridržujemo si pravico do predhodne prodaje, napak in sprememb. = Dodatne informacije = Cena: Na zahtevo

Stanje: novo, Leto izdelave: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precision linear ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Itjdpfscnz Rvsx Agfjl Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable end stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range, horizontal: 45°-90°-25° Mitre range, vertical: 60°-90°-30° Saw blade Ø: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We can also supply the saw blade on request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, številka stroja/vozila: HMD-G-80-1000, Na voljo imam takoj dostopno, skoraj novo batno-membransko črpalko Abel, tip HMD-G-80-1000, litoželezna izvedba, letnik 2017, pravkar popolnoma obnovljena in na novo prebarvana. Maksimalna zmogljivost: 70 m³/h, maksimalni tlak: 15 bar, motor z močjo 30 kW, popolnoma opremljena z novo krmilno omaro, frekvenčnim pretvornikom in tlačnim senzorjem. Zelo primerna za dolge komorne filtrske stiskalnice 1200 ali 1500. Lokacija: 58762 Altena. Itodpfx Agoyxxmgefsl Le postavite, priključite in začnite uporabljati…

Stanje: novo, moč: 316 kW (429,64 KM), vrsta goriva: dizel, velikost pnevmatike: 385/65-22,5, konfiguracija osi: 6x4, medosna razdalja: 3.600 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 390 l, zavore: retarder, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 52.000 mm, širina tovornega prostora: 24.100 mm, višina nakladalnega prostora: 10.000 mm, Oprema: ABS, AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, klimatska naprava, meglenke, navigacijski sistem, računalnik na krovu, retarder, spojka prikolice, tempomat, zapora diferenciala, žerjav, - Four-wheel drive - Aluminium fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors Iedey E Hanspfx Agfjtl - Passenger seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Particulate filter - Radio/multimedia system - Beacon light - Reversing camera - Sliding sunroof - Seat heating - Sun visor - Stability control - Toolbox - Windscreen - Additional steering axle Internal reference number for customer inquiries: Recycling 5-002 MAN TGS 28.440 6x4-4 BL 2-way tipper with Fassi F235 loading crane (foldable at the rear! Also available with 2-shell grab bucket) Vehicle: MAN D2676 LFAZ, 324 kW (440 HP) power, 2,250 Nm torque, Euro 6e 40,000 kg permissible gross combination weight (NatZu) 44,000 kg permissible gross combination weight (TechH) 3,900 mm main wheelbase High-performance engine brake MAN EVBec, multi-stage Rolling brake lock MAN EasyStart Brake pad wear indicator with warning LED side marker lights MAN TipMatic 12.28 OD Retarder MAN EfficientRoll gearbox function MAN Idle Speed Driving gearbox function Gearbox rocking function 6x4-4 (full all-wheel drive = 1st axle driven by propshaft; not Hydrodrive) Last axle is "steerable/liftable" Leaf/air suspension Differential locks on drive axle (Axle 2) Differential locks on driven front axle (Axle 1) and much more. Superstructure: PAVIC special superstructure for recycling vehicles, hot-dip galvanized Front wall at cab height with round tube for strap storage Loading area internal length: 4,800 mm; width: 2,410 mm; height: 1,000 mm (also available in 5,200 mm length) Material: S355, thickness: 4 mm Steel drop sides Hardox Hydraulic drop side on driver’s side (hydraulically opens from top to bottom) Hydraulic drop side with 2 hydraulic cylinders mounted under the tipper, controllable from the cab via pneumatic valve Material: Hardox 400 Trailer tipping hydraulics, dual-circuit, at vehicle rear Plastic toolbox and much more. Foldable loading crane at vehicle rear: Fassi F235 or Fassi F255, as you prefer. All in stock. 4 or 6 extensions. Scanreco radio remote control Crane with hydraulic outriggers, radio-controlled Work lights 5th & 6th hydraulic circuit, e.g., for dual-shell grab Optional: KINSHOFER clamshell bucket 604HPX 250 liters (50 cm) incl. rotator KM04 S69-30 pin mount or 325 liters (60 cm) 2 support plates Aluminium hydraulic tank and much more. Financing available through our partner banks. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and modifications. Technical information Engine displacement: 12,419 cc Gross vehicle weight rating: 28,000 kg Axle configuration Front axle: tire size: 385/65-22.5; differential lock; steered; brakes: drum brakes; suspension: leaf spring Rear axle 1: tire size: 315/80-22.5; differential lock; brakes: drum brakes; suspension: air suspension Rear axle 2:...

Stanje: delavnici obnovljeno (rabljeno), Rotary Table Polishing Machine from Bula, Model MP81 for sale. Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. Ijdpfx Agjlccvmjfstl 6 workpiece holders mounted on a 250 mm pitch circle. 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock system for polishing discs. Polishing spindle diameter 25 mm. The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency converters. Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 1 high-pressure dosing gun WIDOBERG HDP-2, bracket, timer, etc., and pressure vessel. WE CAN ALSO OFFER TO REPAIR OR REFURBISH YOUR EXISTING MACHINE OR A BULA MACHINE YOU ACQUIRE THROUGH ANOTHER CHANNEL.

Stanje: novo, A collection of three of the most advanced CNC plasma cutting machines. Thanks to its user-friendly software, the Swift-Cut Pro series ensures precise cutting at the highest speeds with minimal investment. The Swift-Cut Pro range is easy to operate, quick to learn, and excellently supported by outstanding customer service. The Swift-Cut Pro series is the solution for cost-effective in-house metal cutting. Ijdpfxegkguge Agfjtl You are welcome to arrange a demonstration appointment with us.

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Ijdpofig Rwofx Agfjtl Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, IMMEDIATELY AVAILABLE Itsdpefg Tbrofx Agfsl Studer S20-2 – Mechanically Overhauled Grinding length: 400 mm Centre height: 100 mm Table swivelling: 30° Spindle bore diameter: 127 mm Grinding wheel dimensions: 350x32 mm Headstock taper: MT4 (dead and live centre) Tailstock taper: MT2 Quill stroke: 20 mm Workpiece weight: 20 kg Tailstock with manual cylinder error correction Further possible options: - Glass scales on X- and Z-axis - Internal grinding device - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device

Stanje: novo, Leto izdelave: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of suction connection (inlet): 200 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Max. sound pressure level: 72 dB(A) Air Volume Nominal air flow: 2262 m³/h Dust tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirement Itjdpfx Aohk Dfrjgfjl Maximum performance in this class Very quiet All models equipped with collision protector Applications Designed for commercial use Suitable for all woodworking machines with corresponding suction connection diameters High-Quality, Thoughtful Construction -Robust and compact housing made of galvanized steel sheet -Suction connection can be easily converted from left to right for flexible use -Large access openings for maintenance -Large, mobile chip containers with clamping bracket and chip collection bag -Dust extractor comes fully assembled for immediate operation -All models are mobile -RLA 210 model: Optimal chip distribution in the containers thanks to a large filter area Filter Description -Ultra-compact with maximum filter area -Filter material made of polyester fleece, aluminum-coated, washable and therefore highly durable -Filter standard antistatic, certified and approved according to category M-BIA -Filter resistance monitoring via differential pressure switch, adjustable with warning lamp on control panel -Fan mounted downstream of filter Equipment Details With innovative locking device for secure container positioning Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s Iedsqlck Nopfx Agfjtl • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Woodworking machinesSliding Table Spindle Moulder Minimax twf55 es Item number: 5502261 Robust steel and cast iron construction Anodised aluminium format sliding table Large-scale spindle unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3500 to 10000 rpm Clockwise and counterclockwise rotation standard Height and tilt display precise to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for permanent precision Powerful 5.0 kW industrial motor Curved section hood included Made in Italy Dimensions and Weights Length (Product) approx. 1200 mm Width/Depth (Product) approx. 2000 mm Weight (Net) approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Setup Information Required Space Length: 2800 mm Required Space Width/Depth: 2910 mm Space Requirement Note: Dimensions account for maximum travel paths or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Working area note: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Motor output: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED at machine front Spindle shaft diameter: 30 mm Max. Tool Diameter Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tool diameter for profile milling: 240 mm Max. tool diameter for tenoning: 320 mm EQUIPMENT Features Aluminium sliding table: ✔ Spindle fence: Heavy-duty professional design with hold-down, safety cover and aluminium spindle fence jaws Telescopic mitre fence: with two flip stops Extension table: ✔ Isdpfx Asi Dphtegfetl Curved section safety hood: ✔ Eccentric clamp: ✔ Handle on sliding table: ✔ Manual spindle height adjustment Manual spindle tilt adjustment Control: Manual height and tilt adjustment of the spindle unit Control elements location: On machine body Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Iedpfx Agjlht H Nefetl Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, prva registracija: 06/2015, Oprema: žerjav, Kran: ----- 5 izteznih rok – vodilo za prijemsko orodje – daljinsko upravljanje Itedpfjzy Ebqsx Agfjl

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Itedpfx Ajhkzttjgfol Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Iodpfju I R Utox Agfstl Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Itedpfehkz E Tox Agfjl Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. Itedpfx Aodqzh Togfel The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop Itjdpfx Ajv Erkajgfel T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, AL-KO clean air dust extractor Exhibition unit Isdpfocdr Enox Agfetl Offered at a special price Technical Data Power Unit 250 P Suction connection: 250 mm Motor nominal output: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Ex-demonstration unit – as new Iedpfjcdrzdox Agfjtl Available at a special price Technical data 300-P: Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. air flow rate: 6,000 m³/h Rated air flow rate: 5,089 m³/h Vacuum: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Subject to prior sale.

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Itedpoff Efajfx Agfel Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Iedpjff Efcsfx Agfetl Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -