Faccin 4Hel 3128 nakup rabljenega (43)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, 4 HEL 3128 Four-roll Plate Rolling Machine Electronically controlled, hydraulic four-roll plate rolling machine Manufacturer: FACCIN, Model 4 HEL 3128 Pjdpsiink Sjfx Al Dsrb Technical data: Number of rolls: Four Side rolls geometry: Linear guides Working width: 3050 mm Top roll diameter: 285 mm Bottom roll diameter: 275 mm Side roll diameter: 205 mm Certified roll hardness: 950-1050 N/mm² Pressing force against top roll: 150 tons Working pressure at maximum force: 190 bar Guaranteed installed power: 11 kW (15 HP) Guaranteed maximum rolling speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450 mm Width: 1,520 mm Height: 1,450 mm Guaranteed capacities: With material yield strength 260 N/mm² Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm from pipe diameter 1,425 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double end-stopped swing bearing Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Central lubrication Cone bending device FACCIN AP package CNC control PGS-ULTRA

Leto izdelave: 2018, stanje: dober (rabljeno), Manufacturer: FACCIN Model: 4HEL 3590 Control: Siemens TOUCH Year of manufacture: 2018 Specifications Metric US Standard Roll width 3500 mm Sheet thickness at 3 x top roll Ø 80 mm Sheet thickness at 5 x top roll Ø 110 mm Sheet thickness during prebending 90 mm Top roll Ø 900 mm Top roll Ø 900 mm Bottom roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Bending speed 0-6 Adjustment, bottom roll 0-200 mm/min Adjustment, side roll 0-400 mm/min Top support Yes Side support Yes Pedpskvm Nfjfx Al Dorb Number of driven rolls 2 Power 90+75+9 kW Dimensions (estimated) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Four-Roll Plate Bending Machine Make: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Technical specifications Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Prodjzguumjpfx Al Dob Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Lower roll diameter: 210 mm Side rolls diameter: 165 mm Bending force (against top roll): 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4.2 t Performance Data Rolling capacity (full width) mm: 12 Pre-bending capacity (full width) mm: 8 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 360 Rolling capacity (full width) mm: 6.5 Pre-bending capacity (full width) mm: 5 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 360 Rolling capacity (half width) mm: 15 Pre-bending capacity (half width) mm: 10 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Equipment - Double linear guide system for roll movement - Extra-wide bearing blocks - MCS dual-bearing system for roll rotation - Extra heavy, double-supported swing-out end bearing - Electronic parallelism system EPS - Hardened rolls for high wear resistance and minimal sheet marking - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop function, CE certified - Water cooler for the hydraulic unit All information subject to change. A powered demonstration is available anytime in our showroom.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), skupna masa: 11.500 kg, skupna širina: 1.950 mm, skupna višina: 1.650 mm, največja dolžina izdelka: 4.200 mm, Valjarna za upogljanje, izdelana leta 2006. Ta naprava FACCIN 4HEL 2134 omogoča maksimalno širino pločevine 2.100 mm in maksimalno debelino pločevine 28 mm. Opremljena je z linearnimi vodili in ima zgornji valj premera 350 mm. Če iščete visokokakovostno valjanje, razmislite o stroju FACCIN 4HEL 2134, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Geometrija: linearna vodila Psdpfx Ajzylh Djl Dsrb • Maks. širina pločevine: 2.100 mm • Maks. debelina pločevine: 28 mm • Premer zgornjega valja: 350 mm • Premer pritrdilnega valja: 330 mm • Premer stranskega valja: 240 mm • Moč glavnega motorja: 18,5 kW • Hitrost valjanja: 7 m/min • Posebnost: vizualni/digitalni prikazovalnik položaja valja • Zmogljivost valjanja: • Skupna širina: do 25 mm valjanje / 20 mm predhodno upogibanje pri Ø 1.700 mm, 260 N/mm² • Skupna širina: 20 mm / 16 mm pri Ø 400 mm, 260 N/mm² • Skupna širina: 20 mm / 16 mm pri Ø 1.700 mm, 360 N/mm² • Skupna širina: 18 mm / 14 mm pri Ø 400 mm, 355 N/mm² • Polovična širina: do 30 mm valjanje / 25 mm predhodno upogibanje pri Ø 1.700 mm, 260 N/mm²

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Tehnični podatki: Delovna širina: 2100 mm Moč upogibanja: 28,0 mm Globina upogiba: 22,0 mm CNC-nadzor Premer zgornjega valja: 350 mm Premer srednjega valja: 330 mm Premer stranskih valjev: 240 mm kaljeni valji stožčasta upogibna naprava, dosežena s poševno postavitvijo obeh stranskih valjev mobilna upravljalna konzola z digitalnim prikazovalnikom Pjdox Dtt Aopfx Al Dsrb Moč motorja: 7,5 kW Označitev CE Dimenzije (dolžina x širina x višina): pribl. 3600 x 1500 x 1500 mm Teža: pribl. 14,5 tone Prodajalec ne odgovarja za tiskarske ali prenosne napake. Stroj je glede na starost v dobri optični in tehnični kondiciji ter glede obrabe; rabljeni stroji se prodajajo brez kakršnih koli garancij.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, številka stroja/vozila: plate roll Faccin, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 180 mm, premer zgornjega valja: 200 mm, premer stranskega valja: 160 mm, premer valja: 200 mm, dolžina valja: 2.050 mm, delovna širina: 2.000 mm, delovna višina: 700 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, maks. debelina aluminijaste pločevine: 10 mm, maks. debelina medeninaste pločevine: 12 mm, najv. debelina bakrene pločevine: 12 mm, skupna masa: 3.700 kg, skupna dolžina: 3.500 mm, skupna širina: 1.100 mm, skupna višina: 1.000 mm, moč: 5,52 kW (7,51 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 3, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, STROJ ZA UPOGIJANJE PLOČEVIN FACCIN – 4 VALJNI, HIDRAVLIČNI, 2000 X 8 MM MODEL 2020B4, leto izdelave 2020, zmogljivost 2000 x 8 mm Valji za upogibanje, hidravlične linearne vodila. Stroj je v odličnem delovnem stanju. Zmogljivost upogibanja: - Širina pločevine: 2000 mm - Debelina upogibane pločevine: 8 mm - Debelina pločevine pri predhodnem upogibanju: 6 mm Dimenzije valjev: - Uporabna dolžina: 2050 mm - Zgornji valj: 200 mm - Spodnji valj: 180 mm - Stranski valji: 160 mm Električni motor 5,5 kW, napetost 400/50 V • Kaljenje 4 valjev za povečanje trdnosti površine. • Osrednji valji se poganjajo s hidravličnimi motorji in prestavami. • Stožčasta nastavitev za upogibanje, stranski valji se nagibajo za oblikovanje stožcev. • Sprednji, hidravlični odpiralni del za enostavno razkladanje upognjene konstrukcije. • Spremenljiva hitrost delovnega valja, hidravlična hitrost upogibanja: hitro/počasi. • Konzola z električnim upravljanjem na kolesih, osrednji nadzor z ročkami in 3 digitalnimi zasloni. • Digitalni zasloni za prikaz položaja valjev, ponovljivost upogibanja in predhodnega upogibanja. • Dimenzije: 3500 x 1100 x V 1000 mm – teža 3700 kg. Prjdpfxszy Nv Ej Al Dsb

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Pedpfeypbp Rsx Al Dorb Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Electronically controlled, hydraulic four-roll plate bending machine Manufacturer: FACCIN, Model 4 HEL/S 2122 Technical specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force against top roll: 100 tons Guaranteed installed power: 9.2 kW (12.5 HP) Guaranteed max. rotation speed: 4–8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: With material yield strength of 260 N/mm² Rolling capacity (full working width): 11 mm Pre-bending capacity (full working width): 8 mm From pipe diameter: 1,100 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 286 mm Standard equipment: Double linear guide system for roll movement Prsded Eqg Hspfx Al Dob Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty swing arm bearing, double mounted Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Pedpfegd T R Djx Al Djrb Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: pripravljen za uporabo (rabljen), Stroj za upogibanje profilov Faccin Pjdpfsy Abz Ujx Al Derb

Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 21977-1964, Ponudba 26165 Tehnični podatki - dva gnana valja, vsak valj hidravlično nastavljiv - za predkrivljenje in konično valjanje - upravljanje z ločene upravljalne plošče, z digitalnim prikazom dejanske vrednosti - in ročnim upravljanjem - največja delovna širina 1300 mm - največja debelina pločevine pri 400 N/mm² brez predkrivljenja - pri upogibnem premeru 370 mm znotraj 30 mm - s predkrivljenjem pri upogibnem premeru 370 mm znotraj 25 mm - brez predkrivljenja pri upogibnem premeru 380 mm znotraj in - širini 370 mm 45 mm - premer zgornjega valja vsak 300 mm - premer stranskega valja vsak 310 mm - delovna hitrost 4,5 m/min - pogon 400 V / 30 kW - potrebna površina Š 5800 x V 1900 x G 2200 mm Pjdozf Hkdopfx Al Djrb - teža 8500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, številka stroja/vozila: 18105876-5772, premer gredi: 360 mm, premer valja: 800 mm, skupna masa: 46.000 kg, skupna dolžina: 4.500 mm, skupna širina: 4.850 mm, skupna višina: 3.750 mm, obratovalna hitrost: 6 mm/s, Certificirane osi, izdelane iz kovanega zlitinskega jekla NiCrMo + zaščitene s sistemom za nastavitev višine (PHAS) Sistem za hitro spreminjanje konfiguracije upogljalnih valjev (tehnologija TIMS) Stranski vodilni valji, nastavljivi v 6 smereh, z vsemi hidravličnimi krmilnimi elementi Brezstopenjska nastavitev hitrosti vrtenja in sočasno gibanje osi Psdjwayt Ropfx Al Dorb Upravljalna stikala na osrednje premikajoči se upravljalni plošči

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3L3YF03390, moč servomotorja: 550 W, vhodna napetost: 230 V, razmak između stupova: 262 mm, vrsta vhodnega toka: Klimatska naprava, globina grla: 130 mm, pnevmatska povezava: 6 letvica, Ta serija obsega šest industrijskih šivalnih strojev JUKI serije LH, opremljenih z dvojnim iglom in sistemom za zaklepni šiv, ki so bili neposredno odstranjeni iz proizvodnih linij nekdanje tovarne MASI JEANS v Estoniji. Serija JUKI LH-3100 je ena izmed najbolj razširjenih industrijskih platform za šivanje z dvojnim iglom na svetu, znana po izjemni zanesljivosti, natančnem paralelkem šivu in izjemni produktivnosti v zahtevnih proizvodnih okoljih oblačil. Vsi stroji so bili uporabljeni v isti profesionalni proizvodni enoti in so bili vzdrževani v skladu z istim tovarniškim programom vzdrževanja, kar predstavlja odlično priložnost za pridobitev ustreznega proizvodnega kompleta, pri čemer imajo vsi stroji enake delovne načine, skupni seznam rezervnih delov in poenostavljeno vzdrževanje. Ti stroji so idealni za proizvodnjo denim tkanin, sestavljanje hlač, izdelavo delovnih oblačil, uniform, tehničnih oblačil in drugih aplikacij, ki zahtevajo močne in natančne paralelne šive. Vsebina kompleta Stroj 1 Model: JUKI LH-3188-7 Notranja referenčna številka: 3A-V256 Stroj 2 Model: JUKI LH-3188-7 Letnik: 2004 Notranja referenčna številka: 7A-V257 Stroj 3 Model: JUKI LH-3128-7 Letnik: 1998 Notranja referenčna številka: 37A-5470 Stroj 4 Model: JUKI LH-3178-7 Letnik: 2008 Notranja referenčna številka: 32A-V459 Stroj 5 Model: JUKI LH-3178-7 Letnik: 2002 Notranja referenčna številka: 28A-V249 Stroj 6 Model: JUKI LH-3188-7 Notranja referenčna številka: 47A-K525 Tehnične specifikacije Proizvajalec: JUKI Corporation Serija modelov: LH-3128-7 / LH-3178-7 / LH-3188-7 Vrsta stroja: Industrijski šivalni stroj z dvojnim iglom in sistemom za zaklepni šiv Država proizvodnje: Japonska Sistem za zaklepni šiv z dvojnim iglom Vertikalni sistem rotacije Avtomatsko podmazovanje Integriran elektronski upravljalni sistem (-7 modeli) Avtomatski rezalec niti Avtomatski povratni šiv Avtomatsko pozicioniranje igle Industrijske šivalne mize Robustni jekleni podstavki Proizvodne prednosti • Usklajen proizvodni komplet iz ene tovarne • Visokohitrostno šivanje z dvojnim iglom • Odlična enakomernost šiva • Natančna tvorba paralelnega šiva • Zanesljivo delovanje med neprekinjeno proizvodnjo • Zmanjšane zahteve za usposabljanje operaterjev • Skupen seznam rezervnih delov za celotno proizvodno enoto Zakaj kupiti to serijo • Šest profesionalnih šivalnih strojev JUKI z dvojnim iglom • Usklajeni stroji iz ene tovarne • Skupni postopki vzdrževanja • Skupen seznam rezervnih delov • Stroškovno učinkovito razširitev proizvodne linije • Idealno za nove ali razširjajoče se tovarne oblačil • Odlična naložba za proizvajalce denim in delovnih oblačil Aplikacije • Proizvodnja hlač • Proizvodnja denim tkanin • Dvojni vrsti zaključnih šivov • Šivanje pasu • Pritrditev žepov • Dekorativni zaključni šivi • Proizvodnja delovnih oblačil • Proizvodnja uniform • Tehnična oblačila • Industrijska proizvodnja oblačil Podpfx Asznbtlsl Djrb Stanje Prej uporabljeno v profesionalni proizvodnji oblačil. Vsi stroji so bili v obratovanju do nedavnega zaprtja tovarne MASI JEANS. Dobro splošno industrijsko stanje z normalno estetsko obrabo, ki je skladna s tovarniško uporabo. Pred razstavljanjem je na voljo pregled. Lokacija Valga, Estonija Razstavljanje in transport Kupcev je odgovoren za razstavljanje, natovarjanje in transport. Pogoji prodaje Prodaja se "kot je", kjer je, brez garancije. Del likvidacije tovarne MASI JEANS. Stroji so ponujeni predvsem kot en celosten, usklajen proizvodni komplet. Individualna prodaja je morda

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roll diameter: 320 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Hardened rolls Conical bending device via inclined positioning of both side rolls Podpfx Ajv Htnisl Dorb Mobile control panel with digital display Motor power: 11 kW CE marking Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 t The seller is not liable for typing or data transmission errors. The machine's visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, Biko 3128 – Stroj na ohýbanie plechu (2011) Visokokakovosten 3-valjni stroj za valjanje pločevine za profesionalno obdelavo kovin. Dobro vzdrževan in pripravljen na uporabo. Tehnične specifikacije Model: Biko 3128 Leto izdelave: 2011 Tip valjanja: 3-valjni, začetni stisk Največja širina pločevine: 3100 mm Največja zmogljivost upogiba: 28 mm (odvisno od kvalitete materiala) Premer zgornjega valja: po dogovoru Premer stranskega valja: po dogovoru Moč motorja: po dogovoru Krmilni sistem: Hidravlični, z nastavljivimi stranskimi valji Možnost kroženja stožcev: Da Konstrukcija stroja: Masivni varjeni okvir Predjx Dx Hzspfx Al Deb Varnost: Nujna zaustavitev in nožni pedal za upravljanje Stanje Stroj je v zelo dobrem delovnem stanju Redno vzdrževan Testno delovanje je mogoče Vključeno v prodajo Nožni pedal Hidravlične nastavitve Dimenzije in teža (Prosim, potrdite točne vrednosti s prodajalcem) Dolžina: 5,0 m Širina: 1,8 m Višina: 1,6 m Teža: 12.000 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, premer spodnjega valja: 160 mm, premer zgornjega valja: 175 mm, premer stranskega valja: 135 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 7 mm, moč: 4,4 kW (5,98 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, zavrtljivi zgornji valj, Electronically Controlled, Electrohydraulic Four-Roll Plate Bending Machine Manufacturer: FACCIN, Model: 4 EDL 1617 Technical Specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 1500 mm Top roll diameter: 175 mm Bottom roll diameter: 160 mm Side roll diameter: 135 mm Press force against top roll: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: With material yield strength 260 N/mm² Rolling capacity (full width): 7 mm Prebending capacity (full width): 6 mm From pipe diameter: 875 mm Rolling capacity (full width): 5 mm Prebending capacity (full width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roll movement Extra wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-supported swing arm bearing Electronic Parallelism System EPS Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens PLC control Electric drive for top roll to increase efficiency Safety emergency stop rope and CE certification Psdpfxowwt Dde Al Derb Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Leto izdelave: 1986, stanje: pripravljen za uporabo (rabljen), Working width: 1250 mm, max. sheet thickness: 3 mm, equipped with loading table, vacuum lifter, feed table with rollers, ejector, output table, control console and manual. Inspection is possible. Available from March 2024. Prjdpfxsq A Un Sj Al Djb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Prodpfx Aljt Akt Rj Dsb Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Boy XS / Odlično tehnično stanje Letnik: 2020 Brizgalna enota: Premer polža: 12 mm Brizgalna masa: 4,1 g Brizgalni tlak: 3128 bar Dozirni volumen: 4,5 ccm Zapiralna enota: Zapiralna sila: 10 t Razmak med stebri: 160 mm Velikost pritrditvenih plošč: 321x246 mm Izmetalec: hidravlični Zapiralna enota: hidravlična Krmiljenje: Procan Alpha 4 - zaslon na dotik Dodatna oprema: Stroj kot nov Euromap 67 Robotski vmesnik 6x zračni ventil Vgrajen stranski odvzemnik livarskih kosov Samodejni podajalnik Wittmann s sušilnikom blagovne znamke Farratech Možen nakup vpenjalnih elementov znamke AMF za orodje Dimenzije: Predezy H Swspfx Al Dob Teža: 450 kg Dolžina/Širina/Višina: 1,48x0,52x1,38 m Vsi ponujeni stroji so pred prodajo zagnani s strani naših servisnih tehnikov. Možno je pridobiti video tehničnih testov izbranega stroja ali se udeležiti tehničnih live-testov v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3163 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Data: Number of rolls: Four Side roll geometry: Swinging lever guide Working width: 3,000 mm Top roll diameter: 630 mm Bottom roll diameter: 570 mm Side roll diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800 mm Width: 3,600 mm Height: 3,550 mm Guaranteed Performance: for material yield strength of 260 N/mm² Rolling capacity (full working width): 70 mm Pre-bending capacity (full working width): 60 mm from tube diameter: 3,150 mm Rolling capacity (full working width): 55 mm Pre-bending capacity (full working width): 50 mm from tube diameter: 820 mm Standard Equipment: Swinging lever adjustment of the side rolls Extra heavy-duty, double-supported drop end bearing Electronic parallelism system (EPS) Pedpeiivfqefx Al Dsrb Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for the side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3135 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Specifications: Number of rolls: Four Side rolls geometry: Lever arm guidance Working width: 3,000 mm Top roll diameter: 350 mm Bottom roll diameter: 330 mm Side roll diameter: 250 mm Installed power (guaranteed): 14.4 kW Maximum rotation speed (guaranteed): 5 m/min Machine weight (guaranteed): 13,000 kg Length: 5,700 mm Width: 1,800 mm Height: 2,100 mm Guaranteed Performance Data: For material with yield strength 260 N/mm² Rolling capacity (full working width): 20 mm Pre-bending capacity (full working width): 15 mm Minimum rollable diameter: from 1,750 mm Rolling capacity (full working width): 14 mm Pre-bending capacity (full working width): 12 mm Minimum rollable diameter: from 455 mm Standard Equipment: Lever arm movement of side rolls Predeiivc Djpfx Al Dsb Extra heavy, double-supported drop end bearing Electronic Parallelism System (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP S54 Four-Roller Plate Bending Machine Electronically controlled, electric drive, four-roller plate bending machine Technical Specifications: Number of rollers: Four Side roller geometry: Lever-arm guided Working width: 3,000 mm Top roller diameter: 300 mm Bottom roller diameter: 280 mm Side roller diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500 mm Width: 1,400 mm Height: 1,600 mm Guaranteed Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 18 mm Pre-bending capacity (full working width): 12 mm Pedpfx Aloiivgro Dorb From pipe diameter: 1,500 mm Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 10 mm From pipe diameter: 450 mm Standard Equipment: Electric drive for the top roller Lever-arm adjustment of the side rollers Extra heavy-duty, double-pinned drop-end bearing Electronic Parallelism System (EPS) Hardened rollers for high wear resistance Cone bending device Mobile control panel 3 digital readouts for side and lower roller positions Safety cable with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3162 Variable 3-Roll Plate Bending Machine Electronically controlled, hydraulic 3-roll plate bending machine Technical Data: Number of rolls: Three Side roll geometry: Variable Working width: 3,050 mm Top roll diameter: 620 mm Side roll diameter: 550 mm Pressing force against top roll: 630 tonnes Working pressure at rated force: 250 bar Guaranteed installed power: 55 kW (75 HP) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600 mm Width: 3,700 mm Height: 3,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full width): 75 mm Pre-bending capacity (full width): 48 mm From pipe diameter: 3,100 mm Rolling capacity (full width): 55 mm Pre-bending capacity (full width): 40 mm From pipe diameter: 805 mm Standard Equipment: Variable geometry with linear guides for roll movement Extra-long drop-end bearing for increased frame stability Electronic Parallelism System (EPS) Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hi-tech hydraulic and electrical package Simultaneous rotation and roll movement Prjdeiivgyepfx Al Dsb Safety pull cord with emergency stop and CE certification Centralised lubrication Water cooling for hydraulic system Cone bending device Prepared for retrofit of supports and roller tables FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, RCMI 280 Three-Roll Profile Bending Machine Technical Specifications: Section Modulus: 720 cm³ Podpfeiivhdex Al Djrb Main Shaft Diameter: 280 mm Lateral Shaft Diameter: 280 mm Outer Diameter of Bending Rolls: 720 mm Adjustable Rolling Speed: 0–4 m/min Installed Power: 44 kW (60 HP) Weight: 34,000 kg Standard Equipment: Hydraulic adjustment of lateral rolls 3 driven rolls (3 hydraulic motors + 3 planetary reduction gears) Independent, fully hydraulic lateral profile guide rolls, adjustable in 6 directions Automatic circumference and rotation speed compensation Complete universal roller set for standard profiles and beams (12 pieces) Tool set for machine equipment Low-voltage control via mobile operator console Safety device in accordance with regulations Technical documentation and CE certificates Digital displays for the roll positions of the side rolls

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) Predpfet Akxaox Al Dsb - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC - Outer cover in ABS - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Operating key Operating manual