Stroj za okroglo upogibanje

Faccin HAV 3162

Leto izdelave: 2009, stanje: dober (rabljeno), Lifting capacity: 30 t Fedpeqiz N Rofx Abvefw Precision lift Lifting height: 9 meters

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI Fedpfx Abed Eqqqjvefw DODATNO: kaljeni valji EURO 900,--

Stanje: dober (rabljeno), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Upper roll diameter: 210 mm Diameter of lateral lower rolls: 210 mm Diameter of central lower roll: 210 mm Conical bending device via tilting of both side rolls Hydraulic drop-end bearings Fsdpfjwkaaljx Abvjfw Swiveling control panel with digital display Dimensions (L x W x H): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's condition in terms of appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserske ure: 6.900 h, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, moč: 10 kW (13,60 KM), leto zadnje generalne obnove: 2024, delovno območje: 4.020 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, MSF Pro 4001.20LB Fodpfx Absvw Tdlovefw MicroStep CNC Cutting System of the MSF Pro series featuring: • 2D laser cutting head with IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW Technical Data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm as per VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm as per VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool changer: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removal of drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine has always been operated with maintenance and support contract

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: Fodpfshzbipex Abvefw 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: skoraj kot novo (rabljeno), ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ ΜΗΧΑΝΗΜΑΤΟΣ Τόρνος TACCHI FTC μοντέλο 51 Fsdjd Tm D Ejpfx Abvjfw ΓΕΝΙΚΕΣ ΔΙΑΣΤΑΣΕΙΣ Απόσταση μεταξύ κέντρων: 4000 mm Ύψος: 1550 mm Πλάτος: 1400 mm Μήκος: 6200 mm Βάρος: 10.000 kg Διάμετρος τόρνευσης πάνω από το τραπέζι: 1120 mm Διάμετρος τόρνευσης πάνω από το χάνι: 810 mm Διάμετρος τόρνευσης πάνω από το κενό: 1350 mm Διάμετρος οπής άξονα: 123 mm Αριθμός ταχυτήτων: 18 Εύρος στροφών: 7-550 σ.α.λ. Ισχύς κινητήρα: 25HP Κωνικότητα Morse: Νο 6 Σπειρώματα: μετρικά – ίντσας – module – pitch Τρίτσιγγος τσοκ: 450 mm Πλάκα: 850 mm Επιπλέον πλάκα: 1420 mm Σε πολύ καλή κατάσταση

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07-16 1990, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, Na prodaj je stroj v dobrem stanju, kot je prikazano na slikah, izdelan leta 1990 in opremljen z upravljanjem NCT 90. Zelo malo uporabljen, prodaja se zaradi neizkoriščenosti. Skupna teža stroja je 33 ton. Stroj je popolnoma delujoč. Razstavljanje in transport sta odgovornost kupca. Ffjdpjw Sx Agofx Abvsw

Stanje: rabljeno, Pressure: 75 t Stroke: 250 mm Clearance between uprights (length/side): 800 x 215 mm Installation height: 170 - 885 mm Operating pressure: 7.5 - 8.5 bar Machine weight: approx. 0.45 t Dimensions (L x W x H): 1.2 x 0.8 x 2.1 m Hydraulic/pneumatic workshop press Cylinder can be shifted laterally Ffedjupxr Ujpfx Abvjw Pneumatic foot pedal Winch for table height adjustment 2 press blocks CE marking

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2003, obratovalne ure: 24.000 h, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 4.100 mm, Kot upogiba (maks.): 183 °, radij upogibanja (maks.): 300 mm, debelina stene: 8 mm, Transfluid DB 2090 DB CNC Mandrel Biegezentrum für Rohre Exzellente, hochwertige Maschine aus deutscher Herstellung, Haupt-Hydraulikpumpen komplett generalüberholt und der Hauptbiegekopf vollständig revidiert. Es muss lediglich noch ein neuer Encoder installiert werden, dann ist die Maschine einsatzbereit. Ffedstrd T Tepfx Abvew Ausstattungsmerkmale: – Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Biegeradius – Steuerbare Dornrückholung (anticipated mandrel withdrawal) – Vollautomatische Positionierung von Spannbacken und Mitnehmer – Druckverstärkter Mitnehmer für enge Radien und Dünnwandrohrbearbeitung – Langer Maschinentisch mit 4000 mm über Dorn – Umfangreiches Werkzeugsortiment im Wert von über AU$150.000 inklusive Werkzeugliste: – 101,6 mm / 152 mm CLR – 101,6 mm / 200 mm CLR – 76,2 mm / 114 mm CLR – 76,2 mm / 200 mm CLR – 76,2 mm / 238 mm CLR – 63,5 mm / 96 mm CLR – 57,2 mm / 86 mm CLR – 50,8 mm / 76 mm CLR – 44,5 mm / 67 mm CLR – 40 x 40 mm / 120 mm CLR – 50 x 50 mm / 150 mm CLR – 60,3 mm / 150 mm CLR – 48,3 mm / 120 mm CLR

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation Fjdogg Nv Ispfx Abvsfw - 400V