Stroj za ovijanje pločevine

Biko 3128

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Crodpeyv In Iefx Afded Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: rabljeno, TEHNIČNI PODATKI - Maksimalni modul rezkanja zobnikov: 1,5 [mm] - Maksimalni premer rezkanja zobnikov: 70 [mm] - Maksimalna dolžina rezkanja zobnikov: 100 [mm] - Maksimalna dolžina kosa: 200 [mm] - Minimalno število zob za rezkanje zobnika: 3 - Število navojev polža (posebni dodatki): 1 - Kot spiralnosti: 0 – 90 [°] - Maksimalni premer rezkalnega orodja: 50 [mm] - 11 standardnih hitrosti rezkalnega orodja - Običajna hitrost stroja: 226-2100 [obr/min] - Moč: 1,5 [kW] - Neto teža: 1035 [kg]. Crsdpfxsuhbplo Afdod DODATNA OPREMA - Z nalagalnikom kosov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Pressure: 170 t Bending length: 3,170 mm Frame gap: 2,700 mm Throat depth: 420 mm Installation height: 470 mm Stroke: 200 mm Approach speed: 100 mm/sec Working speed: 10.0 mm/sec Credpfxsxabgpj Afdod Return speed: 100 mm/sec Table width: 180 mm Table height: 960 mm Oil capacity: 235 L Pressure: 300 bar Controlled axes: 6 units Operating hours: 29,400 h Total power requirement: 16.5 kW Machine weight approx.: 11,910 kg Dimensions L-W-H: 4,025 x 2,020 x 2,900 mm Very well maintained condition (!!) Only approx. 29,400 operating hours - Inspected condition - Machine video available - ?v=APP0HZjMms4 Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1+Y2, R, Z1+Z2) * Swiveling control panel – front left * Tool & program library - CNC-controlled back gauge adjustment (X-axis) * Adjustment range up to 700 mm - CNC-controlled vertical adjustment of back gauge fingers (R axis) * Adjustment range up to 250 mm - CNC-controlled lateral adjustment of back gauge fingers (Z1+Z2) - Hand-held controller for manual axis movement - AMADA manual upper tool clamping system - AMADA goose-neck upper tools – segmented - AMADA lower tool holder – incl. 1x V-die (not complete) - AMADA DIGI PRO – digital angle measuring system - 1x mobile double foot switch - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - Emergency stop button at the front - Operating manual (ENG)

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front Credpfx Afexacdvodsd * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Cedsxabkbspfx Afderd Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: novo, Leto izdelave: 2026, premer spodnjega valja: 220 mm, premer zgornjega valja: 220 mm, premer stranskega valja: 180 mm, premer valja: 220 mm, dolžina valja: 2.070 mm, najv. debelina jeklene pločevine: 10 mm, lastna masa: 4.500 kg, - 4 valjka - Kapacitet 2070 x 10 - Kapacitet savijanja 2070 x 8 - Očvrsnuti valjci - Prečnik gornjeg valjka 220 mm - Prečnik donjeg valjka 220 mm - Prečnik bočnog valjka 180 mm - Hidraulični pogon - Digitalni prikaz za levi pomeraj valjka - Digitalni prikaz za pomeranje srednjeg donjeg valjka - Digitalni prikaz za pomeranje desnog valjka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Hidraulički pokazivač za jednostavno pozicioniranje valjaka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Gornji valjak je hidraulično otvarajući - Čelična konstrukcija ST-52 - Hidraulični drop-end za lako pozicioniranje valjka - Hidraulični sistem podizanja i spuštanja sa centralnim i bočnim valjcima - Hidraulički balans sistem - Zaštita od prenapona Crodpsr H Df Isfx Afdsd - Dokumentacija - 400V

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: SIEMENS, model krmilnika: PLC, število valjev: 4, premer spodnjega valja: 150 mm, premer zgornjega valja: 150 mm, premer stranskega valja: 140 mm, premer valja: 150 mm, dolžina valja: 2.050 mm, delovna širina: 2.000 mm, nastavitev višine valja: 18 mm, delovna višina: 800 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 4 mm, maks. debelina aluminijaste pločevine: 6 mm, maks. debelina medeninaste pločevine: 6 mm, najv. debelina bakrene pločevine: 6 mm, skupna masa: 2.800 kg, skupna dolžina: 3.800 mm, skupna širina: 1.200 mm, skupna višina: 1.100 mm, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, 4-VALJČNA KRIVILNA STROJKA NC HIDRAVLIČNA MODEL 2000X6 MM / 4 MM ZA PREDKRIVLJENJE PROGRAMIRLJIVO AVTOMATSKO VALJANJE – NC KRMILNIK 4 OSI Kapaciteta: - Širina pločevine: 2000 mm - Debelina valjanja: 6 mm - Predkrivljenje: 4 mm Minimalni premer valjanja: D = 180 mm (odvisno od debeline in trdnosti pločevine) Dolžina valjev: 2050 mm Premer zgornjega valja: 150 mm Premer spodnjih valjev: 150 mm Kaljeni valji s površinsko utrditvijo in gladko površinsko obdelavo, primerni za valjanje pločevin iz nerjavnega jekla. Priprava za stožčasto valjanje pločevin. Električni pogon centralnih valjev za vlečno upogibanje pločevine. Pred-obremenitev je prilagodljiva glede na debelino in trdnost pločevine. Električna konzola z gumbi in digitalnim prikazom pozicije 4 valjev na ekranu. NC programabilno krmiljenje 4 osi omogoča samodejno valjanje ter shranjevanje do 200 programov v pomnilnik. Hidravlična odprtina na sprednji strani za odstranjevanje zvitih tulcev. Hitrost delovanja je nastavljiva (počasno/hitro). Vgrajen varnostni sistem z gumbom za silo ustavitev. Credow Hpzwspfx Afdsd Navodila za uporabo in servisiranje priložena. Tlorisne mere (mm): 3800 x 1200 x V1100 Teža: 2800 kg

Stanje: rabljeno, Leto izdelave: 2006, skupna širina: 4.600 mm, skupna višina: 1.830 mm, Dimensions (L x W x H): 217 x 460 x 183 cm Price: On request - Year of manufacture: 2006 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 107402 - Number of spindles [pcs]: 4 - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 Cjdpswnig Nsfx Afdsrd - Spindle 3: - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Infeed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Feed drive: Cardan drive - Extraction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Shipping dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Shipping units [pcs]: 1 Financial information VAT: The stated price is net, plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Yorick Diebels

Stanje: novo, Leto izdelave: 2025, nosilnost: 20.000 kg, 20-ton container rotator, turning rolls, complete set 380 V, infinitely variable speed adjustable from 200 to 1000 mm/min. Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support rollers temperature resistance: 100°C Cedpfjifgu Ujx Afderd Dual synchronized drive AC motor, 380 V, 750 W With hand and foot remote control, complete set

Stanje: rabljeno, Leto izdelave: 1979, Cylindrical grinding machine SKF with internal grinding attachment, hydraulic Codsgt Ea Repfx Afdord