Es-Ge 4-Achs-Ballastauflieger nakup rabljenega (82.554)

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Bwsdpfx Aowx Dctegtjl Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) Bodpfxeyz E T Sj Agtowl * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity * Outer frame: UNP steel Towing device: * 2-inch king pin Underrun protection: * In accordance with EC regulations, bolted design Side impact protection: * In accordance with EC regulations Landing legs: * Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centrally located 10-hole wheel connection with offset ET 0 * Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function Steering: * 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage * Centralized lubrication points positioned externally Axle lift: * First and second axles can be raised automatically, with additional deactivation on the chassis Brake system: * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand * Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit * Aluminium air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit Mudguards: * In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard * Rear mudguards with spray flaps Load securing: Bwedpfx Agowx Dcajtol * 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t) Stake pockets: * 10 pairs of stake pockets recessed into the outer frame * 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame) Insertable stakes: * 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length Stake magazine: * One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall Front wall: * Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted Lighting system: * According to EC, 24 Volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights rear * Number plate lights 1x15 and 2x7-pin connector at the front panel Equipment: * Two wheel chocks with holder * Warning panel as per ECE 70 * Work spotlight on light carrier (activated by reverse gear) * Holder for rotating beacon at the rear (including beacon) * Fixed access ladder on both left and right, including plug-in step * Smart Board * Sticker: "Vehicle swings out" and load center of gravity indication Paintwork: * Chassis and front wall blast-cleaned and high-quality top-coated * Chas

Stanje: novo, največja dovoljena obremenitev: 39.850 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment features. Full equipment specification available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched crossmembers * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting interface for customer-side installation of a support device at the front, approx. 90 x 90 x 4 mm Coupling device: * 2-inch king pin (also suitable for 3.5) Underrun protection: * According to EC regulations, bolted version Side impact protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) with S-foot Axles: * 3 x 9 t air suspension axle units, brand of our choice, with disc brakes approx. 430 x 45 mm * ABS * Wheel connection, center guided, 10-hole with offset 120 * Total lift of air suspension approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, control via rotary slide valve with detent feature, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted at the lifting/lowering unit bracket * Smartboard/TIM/Infocenter, no TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via button in driver’s cab (15-pin socket PIN12). Button in driver’s cab not included in delivery Brake system: * Manufacturer of our choice * Two-line compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mismating-proof coupling heads permanently mounted to the front crossmember, without connecting line to truck Tyres: * 6 pieces, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), offset 120 * Basic version tyre pressure monitoring, connected to EBS CAN-bus * Tyre pressure indicator in driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EC, PVC mudguards (half-shell) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings mounted on side of outer frame, evenly distributed (tensile strength approx. 10 t) * 13 pairs of lashing points (hoops) in outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/Posts: * 5 pairs of stake pockets recessed in outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with lower stop Front wall: * Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: * Magazine for plug-in stakes inside front wall Floor: * Approx. 28 mm hardwood floor recessed into outer frame, with galvanized omega steel profiles Lighting system: * According to EC, 24 volts with multi-chamber lights * LED side marker lights * White LED position lights at front * LED outline marker lights at rear * License plate lights * 1 × 15-pin and 2 × 7-pin sockets on front crossmember Equipment: * Two wheel chocks with holders * Warning plate according to ECE 70 * 2 LED work lights on lamp carrier (switched via reverse gear) * Bracket for rotating beacon at rear (including rotating beacon) Bodpfxjwx Dbpo Agtewl * 1 foldable an

Stanje: rabljeno, največja dovoljena obremenitev: 69.060 kg, skupna masa: 84.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, naslednji pregled (TÜV): 07/2026, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Celoten seznam opreme je na voljo na zahtevo. • Šasija iz visokokakovostnih QSTE drobnozrnatega jekla, s centralnim nosilcem, ni teleskopska • Pritrdilne zanke, pritrdilna sila približno 100 kN na zanko, zložljive Bedpfx Agjy Ikbhstswl • 4 pari žepov za stebre v območju nakladalnih stojal, približno 80 x 80 mm • Hidravlične opore (elektro-hidravlične) • 6 x 11.000 kg (tehnično), SAF osi • Zračno vzmetenje • 1. os vodilna, 2. os toga • 3. – 6. os prisilno vodene • Tridec krmiljenje • Dodatno krmiljenje • Nato vtičnica • 1. os dvižna • Pnevmatike 265/70R19.5 • 3,5-palčni zatič, zamenljiv • Wabco ABS/EBS zavore • Jeklena sprednja stena, približno 400 mm visoka • 2 stranski steni na labodjem vratu • Barvanje enobarvno v RAL 3000 rdeči barvi

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Bwedpsy Auhzofx Agtsl Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Bsdpfxjw U H Sbs Agtjwl Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Partial list of equipment. Full equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Bjdpfx Agewt Iylotewl Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair

Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Bodpfewyhy Esx Agtjwl Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear Bwsdsugqvfopfx Agtol * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Bwjdpfxok Units Agtol Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 68575 Nooteboom, Euro standard * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg Bwsdpfsyibz Rjx Agtel * Axle manufacturer: SAF * Tire condition, 1st axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire condition, 2nd axle: 40% -- 40%, tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Body manufacturer: ES-GE * 3rd axle hydraulically forced-steered * Extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications subject to change, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive service portfolio includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documents * Ordering of export and customs license plates * Vehicle preparation: new tarpaulins, signage, resprays, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialist staff; we are happy to advise you.

Stanje: rabljeno, Leto izdelave: 2007, Contact Theo Lelie for further information. Bedpfjyrtm Hex Agtjwl

Stanje: rabljeno, prevoženi kilometri: 297.900 km, moč: 265 kW (360,30 KM), prva registracija: 03/2016, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, * MAN TGS 32.360 8x2 * Šasija * Medosna razdalja cca 4,70 m * Euro 6 * Avtomatski menjalnik * Vzmetenje: listnate vzmeti/listnate vzmeti/zračno/zračno * 3 x krmiljena os * Senčnik * Dvignjen izpuh * Pnevmatski sedež * 3-sedežna kabina * Kamera za vzvratno vožnjo * Geocept Trucksystem * Ogrevana sedeža * Diferencialna zapora * Radio CD + navigacija * električni pomik stekel * električna ogledala * Pnevmatike * 315/70R22,5 70-70-40 % * Nemško vozilo * Neto prodaja znotraj EU le z DDV kavcijo in dokazilom o registraciji v namembni državi (potrdilo o prihodu), * Prodaja samo pravnim osebam, možen prevoz do pristanišča, * Ta ponudba ni zavezujoča in je prosta sprememb. * Pridržujemo si pravico do napak in vmesne prodaje. Brez jamstva za tipkarske napake. * Ogledi samo po predhodnem dogovoru, * WhatsApp Bwodpfxswyq Dtj Agtjl

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Bsdpsy Irt Eefx Agtswl

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Bwodoy Igu Dspfx Agtol

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Flatbed, ABS, air suspension with lift/lower function, axle load scales, total platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), cleat strip on outside of ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, mandatory contour marking, rotating beacon, spring-loaded parking brake, incl. axle load indicators, chassis fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment, Price: €1,000. -- Subject to typing errors, mistakes, and changes. Sample images. For more data see: !, More Details: ! Bjdpfx Agoy Hfv Rjtowl

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, lowbed approx. 6,900 mm long, loaded platform height approx. 890 mm, 24 x lashing rings each rated at 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer side of ramps and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking in accordance with regulations, beacon, spring-loaded parking brake, including axle load indicators, vehicle hot-dip galvanized, -- errors, omissions and changes excepted, sample images --, More data at: !, More details: ! Bwedsy Hclijpfx Agtjl

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 --/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 --/140J, velikost zadnje pnevmatike: 235/75R17,5 --/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Pritrdilni obroči, gumijasta prevleka na rampah in zadnjem naklonu, nakladalna višina cca 900 mm, -- Napake v tisku, spremembe in napake so pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Bwjdpfx Asy E Si Isgtol

Stanje: rabljeno, lastna masa: 8.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl. 9.500 mm, dolžina tovorne površine nizkega ležišča pribl. 7.360 mm, višina nakladanja pribl. 910 mm, 14 parov pritrdilnih obročev, vozilo se prodaja po naročilu stranke. Pridržujemo si pravico do tiskarskih napak, sprememb in napak, slike so vzorčne. Več podatkov na zahtevo! Bjdsy Etl Dspfx Agtowl

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Flatbed, ABS, air suspension with lift/lower function, axle load scales, total platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), cleat strip on outside of ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, mandatory contour marking, rotating beacon, spring-loaded parking brake, incl. axle load indicators, chassis fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment, Price: €1,000. -- Subject to typing errors, mistakes, and changes. Sample images. For more data see: !, More Details: ! Bedjy Ethfjpfx Agtewl

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Flatbed, ABS, air suspension with raising and lowering function, axle load scales, total loading area length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strips on the outside of ramps and rear slope, laterally adjustable ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, rotating beacon, spring-applied parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment = price: €1,000, -- Errors, omissions, and changes excepted, sample pictures --, More data at: !, More details: ! Bwsdpfx Aoyy Namogtsl

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje! Bjdpfx Aowmpbdjgtswl

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.530 mm, Leto izdelave: 2025, Oprema: ABS, 2-Axle Self-Steering Trailer Type M2K-9L Bwedpfx Aegqc Hbsgtel * COMPACT steering system * Corrosion resistance due to powder coating * All add-on components bolted * Conventional wiring * Mounts and accessory parts in stainless steel or galvanized * 2 single axles, BPW make, 10 t with disc brakes, including safety cables * Air suspension * Aluminum air reservoirs * IX model bolster, with 1x mechanical telescopic stakes * Tires: 275/70 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Manual central lubrication * Paintwork: RAL 9011 graphite black * Payload approx. 14,550 kg 2-Axle Self-Steering Trailer Type M2K-10B * Differences to M2K-9L: * Leaf spring suspension * 2 single axles, BPW make, 12 t with drum brakes, including safety cables * IX model bolster, with 1x hydraulically telescopic stakes * Tires: 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer Type M2K-10L * Differences to M2K-9L: * 2 single axles, BPW make, 12 t with drum brakes, including safety cables * IX model bolster, with 1x hydraulically telescopic stakes * Tires: 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer Type M2R-10L Differences to M2K-9L: * Ratio steering system (4-cylinder) * 2 single axles, BPW make, 12 t with drum brakes, including safety cables * IX model bolster, with 1x hydraulically telescopic stakes * Tires: 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various additional equipment available. More information on request. Images may differ from the original. Subject to change without notice. Contact: Niclas Lott Tel.:

Stanje: novo, barva: bela, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 18 m³, dolžina tovornega prostora: 5.700 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.400 mm, Leto izdelave: 2011, Vehicle location: Bovenden. Bwedpsvhkniofx Agtol Body: For MAN and Mercedes-Benz 4-axle chassis from approx. 4,200 mm wheelbase, approx. 18.3 m³. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!