Elumatec Sbz 140 Elucam nakup rabljenega (4.640)

Stanje: rabljeno, Leto izdelave: 2019, ELUMATEC - SBZ 140 ELUCAM - 2019 Bjdpfx Ageyl Shvetelg - 4 osi - Premiki X/Y/Z = 7400-7600/850/650 mm - Osa A 0-180 stopinj - Hitri premiki 60-65 m/min - Vreteno 24000 RPM, 11 kW S1 - ATC z 8 pozicijami - 2442 ur rezanja vretena - Pod napetostjo - Zelo dobro stanje

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Bsdpoy Ah Tksfx Agtjlg dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Bedpfx Agsy Aafxjtjlg

Leto izdelave: 2020, obratovalne ure: 1.288 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 4-axis CNC profile machining centre For economical and efficient machining of aluminium and thin-walled steel profiles Standard version equipped with air-cooled milling spindle (version with water-cooled milling spindle available as an option) All operations, such as milling, drilling, and tapping, are carried out on a stationary clamped profile. Infinitely variable machining between -90° and +90° with any available tool Automatic clamp adjustment with absolute measuring system The travelling tool magazine ensures short tool change times, resulting in optimal machining cycles. The magazine can be equipped with eight tools. For double profile and end machining, up to two swivelling angular milling heads are available, each with two different tools (0° – 90° – 180° – 270°) (option) Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and good machine accessibility. 4-axis control, 18.5" colour monitor, USB ports and network connection, Windows operating system eluCam SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm Blsdpfx Aowxmdtjgtsg

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm Bodjwwtyljpfx Agtjlg 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Blsdpfxjx E Ahzs Agtsg Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Leto izdelave: 2010, stanje: rabljeno, 4-osni obdelovalni center z 8-mestnim avtomatskim menjalcem orodij za aluminijaste ali PVC profile Največja dolžina obdelave: 3.100 mm Pomik Y-osi: 850 mm Pomik Z-osi: 650 mm Nihajni kot A-osi: 0° - 180°, največja hitrost vrtenja 21.000 min⁻¹ Teža: približno 3.000 kg Operacijski sistem Windows 7, minimalno mazanje Zaznavanje in samodejno premikanje vpenjal, 6 pnevmatskih vpenjal za material Blsdpexvp Nkjfx Agtjg Nakladanje je vključeno v ceno

Leto izdelave: 2003, stanje: rabljeno, 4-axis machining center with 8-position automatic tool changer for aluminum or PVC profiles Bodpfouwq S Dox Agtslg Maximum machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm A-axis swivel angle: 0° - 180° max. Spindle speed: 21,000 rpm Windows operating system Minimum quantity lubrication system Clamp detection and automatic repositioning Chip conveyor integrated in the bed Chip extraction system Pendulum operation via two light barrier zones Loading included in the price Weight: approx. 4,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Bljdpfx Agew Svmistsg Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Heures machine : 13 066 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Bsdpfxoyia Ezo Agtslg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. Blodpsxy Hciefx Agtsg TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ PODATKI O STROJU Pnevmatski sistem Tlak: 8 bar Električni podatki Tip priključka: 3/PEN Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles 7.3m Due to a switch in our production to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The last service was performed by Elumatec in March 2026, and the machine has not been used since then. Interested parties are welcome at any time—the machine can gladly be demonstrated and tested here on site. Technical specifications: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0-90°, fully programmable - C-axis swivel angle: 0-355°, fully programmable - Max. machining length without end-face processing: 7,300 mm - Max. machining length with end-face processing: 6,980 mm - Tool changer with 10 stations, plus a saw blade holder - 8 profile clamps - Tool holding system: HSK63 - Spindle power: 15 kW / 22,000 rpm - Double-layer machining - Minimum quantity lubrication system - Central lubrication - Saw blade: 400 mm Bljdpsy Dvq Hefx Agteg The machine is available immediately. Required space: see attached layout. Transport instructions are also included in the attachment; if you have any questions, please contact us at any time. Disassembly, loading, and transport for reassembly purposes should preferably be organised by the buyer. Various tools and aids can be made available by arrangement, as far as possible. All information and dimensions have been provided to the best of our knowledge and belief, but we cannot guarantee their completeness or accuracy! The sale is as inspected, without guarantee, return, or similar. Subject to prior sale.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Prodaja CNC obdelovalnega centra – Elumatec SBZ 130 Proizvajalec: Elumatec Model: SBZ 130 Leto izdelave: 08/2007 Cena: 24.900 EUR brez DDV Stanje: zelo dobro, redno servisiran s strani pooblaščenega servisa Elumatec v ČR Razpoložljivost: takoj na voljo Dokumentacija: fotografije in video stroja na voljo Opis stroja: Trosni CNC obdelovalni center, namenjen obdelavi aluminijastih in jeklenih profilov. Stroj omogoča učinkovito serijsko proizvodnjo zahvaljujoč nihalnemu načinu obdelave (desno/levo delovno območje). Posebej primeren za proizvodnjo okenskih, vratnih in fasadnih sistemov. Prodajne prednosti: • Stroj je bil ves čas redno servisiran pri pooblaščenem servisu Elumatec v ČR. • Robusna in zanesljiva konstrukcija s težo cca 5,5 t zagotavlja stabilno in natančno obdelavo. • Nihalni način obdelave omogoča bistveno povečanje produktivnosti. • Obdelovalni center je povsem delujoč in pripravljen na takojšnjo uporabo. Tehnične specifikacije: • Število osi: 3 • Revolverska glava za 8 orodij • Največja dolžina obdelave: 6500 mm • Nihalni način obdelave: da (desna / leva stran) • Samodejno pozicionirane vpenjalke: 8 kosov • Moč: 8,5 kW Bedpfxoyt E D Ts Agtolg • Moč vretena: 5,5 kW • Največja hitrost vretena: 6000 obr/min • Vpenjalni tlak: 7 bar • Hitrost pomika: – X os: 34 m/min – Y + Z os: 18 m/min • Teža stroja: cca 5,5 t Dodatne informacije: • Možnost pošiljanja dodatnih fotografij in videa stroja • Osebni ogled možen po predhodnem dogovoru

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 122000029, Ponujamo zelo dobro ohranjeno strojno obdelovalno središče za profile elumatec SBZ 122/75, letnik 2022. Tip: 122/75 Serijska številka: 122000029 Letnik proizvodnje: 2022 Napetost: 400 V Frekvenca: 50/60 Hz Moč: 17,5 kW Tok: 25 A Največji motorni tok: 20 A Kratkostična trdnost (Ik/SCCR): 5 kA Tlak stisnjenega zraka: 7 bar Teža: 3800 kg Maksimalni premer palice: 180 mm Hitrost vretena: 6000 min⁻¹ Maksimalna hitrost: 20000 min⁻¹ Bedpfx Agjywku Tetslg Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Bsdpfsw A Rv Iex Agtslg Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Leto izdelave: 2002, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 1300030418, Naprodaj CNC obdelovalni center za aluminijaste in jeklene profile Elumatec SBZ 130. Stroj je v lasti podjetja in se nahaja v zaprtem proizvodnem obratu, zaščiten pred zunanjimi vplivi. Specifikacije in stanje: Letnik: 2002. Stanje: Trenutno ni v delovnem stanju (potreben servis pnevmatike). Bledpjyz Dvrjfx Agtsg Zgodovina: Stroj je bil v aktivni uporabi do leta 2014, nato skladiščen v hali. Elektronika: Računalnik je popolnoma funkcionalen, stroj je mogoče zagnati za preverjanje sistema. Potrebne investicije: Zamenjava celotnih pnevmatskih cevi in pregled/servis krmilnih blokov. Prednosti: Stroj je mehansko v dobrem stanju in ni bil izpostavljen zunanjim vplivom. Idealna priložnost za podjetja z ustreznimi tehničnimi zmogljivostmi za obnovo ali modernizacijo stroja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 485 mm, pomik po osi Z: 340 mm, skupna višina: 2.000 mm, skupna širina: 1.600 mm, skupna masa: 5.500 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 6.000 W, največja dolžina izdelka: 7.500 mm, število osi: 3, Cette Elumatec SBZ 131 à 3 axes a été fabriquée en 2010. Elle offre un déplacement impressionnant de l’axe X de 4 200 mm, un déplacement de l’axe Y de 485 mm et un déplacement de l’axe Z de 340 mm. La machine est équipée d’une tête porte-outil rotative à 8 positions et d’une vitesse de broche maximale de 6 000 tr/min. Si vous recherchez des capacités d’usinage de profilé de haute qualité, envisagez le centre d’usinage de profilés CNC Elumatec SBZ 131 que nous proposons à la vente. Contactez-nous pour plus de détails. • Commande : PC industriel avec logiciel eluCam ; moniteur couleur 15" • Tourelle/porte-outil : tourelle rotative à 8 positions avec changeur d’outils à 8 positions • Avance rapide : X 60 m/min ; Y 30 m/min ; Z 30 m/min Bledpfx Ageyt Ifyotsg • Interface outil : BT30 • Systèmes de pinces : ER25 / ER32 • Diamètre de lame de scie : env. 300–420 mm Caractéristiques techniques Taille du cône BT 30

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, skupna masa: 9.000 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 5.500 W, število osi: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret tool changer. If you are looking for high-quality profile machining capabilities, you should consider the Elumatec SBZ 130 CNC profile machining center we are offering for sale. Contact us for further details. • Control system: Ferrocontrol CNC Blsdpfxeyt Hg No Agteg • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: high-speed milling spindle • Tool system: • Tool changer: turret head • Tool positions: 8

Stanje: potreben popravila (rabljeno), Leto izdelave: 2000, Na prodaj rezalno-obdelovalni center Elumatec model SBZ 610. Stroj je bil preizkusno zagnan. Potrebuje obnovo. Blodpfx Aoy Avylogtog

Stanje: rabljeno, Elumatec SBZ 130 obdelovalni center za profile s 4 osmi, industrijsko PC krmiljenje, 6,7 m dolžina postelje, revolverski menjalnik z 8 pozicijami orodja, možnost uporabe aktivnih orodij, BT30 vpenjalni stožec, največji pomiki: X = 6700mm pri 60m/min, Y = 380mm pri 30m/min, Z = 265mm pri 30m/min, največja hitrost 6000obr/min. Serijska številka: 20053/2003/10. Država izvora: Nemčija Blodjy H H Egjpfx Agtjg Lokacija: Stroji se nahajajo v High Wycombe, Združeno kraljestvo. Na lokaciji ni nakladalnih zmogljivosti, razstavljanje in nakladanje sta strošek kupca.

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations such as milling, drilling, and tapping are carried out with the profile stationary, protecting its surface. Axes: 3-axis control, with the tool spindle as an additional axis. Machining length (X Axis): 7200 mm Bljdpeyt H Uysfx Agtsg Travel (Y Axis): Typically 485 mm (Vmax. 60 m/min). Travel (Z Axis): Typically 340 mm (Vmax. 60 m/min). Spindle speed: Standard 6000 rpm, or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated turret head for 8 tools or 4 angle heads, ensuring short tool change times. Control system: Windows operating system with eluCam software. 18.5” PC panel, USB ports, and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Prepared tooling dedicated for PVC+ STEEL processing: - Tool holders - Reducer for steel machining - Special tools with chip breaker - Dedicated programs for door profile processing,

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, številka stroja/vozila: 031809, TECHNICAL DETAILS Travel distance X-axis: 9,500 mm Travel distance Y-axis: 1,000 mm Travel distance Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 1/10° increments Swivel angle C-axis: ±182°, freely programmable in 1/10° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum cutter diameter: 100 mm Maximum disc cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air supply: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Bledpeycul Sofx Agtog Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining processes: milling, drilling, tapping, thread milling, punching and sawing with stationary profile bar 6-sided machining: front optional, possible from below Profile bar protection: processing with stationary profile bar Robust and low-wear direct drives in all axes Axes: 5-axis control for spatial machining Monitor: 15-inch colour display Interfaces: USB connections, network connection 2-layer processing for pendulum operation Associated tools (HSK holders) Two circular saws for aluminium Note: Documentation of the machine’s disassembly is enclosed.

Leto izdelave: 2009, stanje: rabljeno, 3-osni obdelovalni center z avtomatsko menjavo orodja za aluminijaste ali PVC profile Maks. pomik X-os: 3.850 mm Maks. pomik Y-os: 350 mm Maks. pomik Z-os: 280 mm Windows krmiljenje z USB priključki Brezstopenjsko nastavljivo število vrtljajev do 22.000 min⁻¹ Ročni upravljalnik Minimalno mazanje s pršenjem Menjalnik orodij z 2 magazinama (skupaj 10 mest plus kotna glava) Prepoznavanje in premik vpenjal 2 svetlobni zavesi in 2 materialna prislona omogočata nihajno delovanje Skupaj 8 vpenjal za material Bledeyqyaqjpfx Agtsg Vreteno v dobrem stanju, sila izvleka vretena: 12 kN Teža: cca. 2.000 kg

Leto izdelave: 2018, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Machine Information: The machine comes from a metalworking company specializing in the production of aluminium windows, doors, and façades. It was purchased in 2018 to relieve several 5-axis machines, specifically for aluminium entrance door manufacturing. Due to internal restructuring, the machine was no longer used and became available. The machine has been carefully cleaned, inspected, and serviced on the premises of Weyand. All worn components have been replaced. Programming can be done either directly at the machine (eluCam) or via the included office software eluCad. The software option package for data import of ECW, NCW, and V6 files (e.g., LogiKal or Wictop) is also included. Machine Description: - Efficient machining of aluminium, plastic, and steel profiles - A-axis infinitely adjustable from -120° to +120° - Linear guides for clamp shifting - Enhanced machining results through intelligent control technology - Rapid positioning of the machining unit (up to 120 m/min) via dynamic servo drives - Thread cutting without floating tap holder - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No referencing run required for main axes thanks to absolute encoder systems - Collision avoidance via automatic clamp detection and positioning - Power torque milling motor with closed-loop speed control for short spindle acceleration and braking times - Certified, drive-integrated safety functions Bledpfxoyr H Abe Agtsg Low power consumption due to intelligent control technology. Energy recovery through common DC-link coupling of axis drives with feedback and buffering of braking energy. Green-Line cooling unit for control cabinet with reduced energy consumption - Windows operating system - 15" flat panel display, USB ports and network connection - Simple and user-friendly programming via eluCam at the operator terminal, even during machining operations - Remote maintenance via TCP/IP with available internet connection Equipment: - Operator safety enclosure - Four horizontal pneumatic clamping systems - Material stop left - Minimal quantity lubrication system - Handheld control device - Depth gauge Technical Data: - Max. machining length without end-face operations: 4,050 mm - X-axis travel: 4,176 mm, Vmax 120 m/min - Y-axis travel: 1,040 mm, Vmax 60 m/min - Z-axis travel: 540 mm, Vmax 30 m/min - Machining directions 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Milling spindle speed: max. 20,000 rpm - Milling spindle power: 7 kW, S1 (water-cooled) - Tool interface: HSK-F63 - Automatic tool change - Twelve tool positions in the automatic magazine - Max. disc milling cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp shifting - Basic clamp (with round guide) - Software: eluCam - Compressed air connection: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute (with spraying): approx. 185 l Accessories included (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disc milling cutter - Disc milling cutter D=92x6.0 mm, Z=14, d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circuit, for machining oversized parts - Various used tool holders and milling cutters - ESTA chip extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW and V6 files

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Bjdpfswwtw Dox Agtslg Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo