Center za obdelavo profilov

Elumatec SBZ 140

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Cjdpfsy Ah Tksx Aplorb Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Leto izdelave: 2005, obratovalne ure: 900 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalna žaga GMM - Lexta 36 (4 osi) Večnamenska žaga za marmor, granit in kamen, ki zagotavlja visoko natančnost in enostavno uporabo. Značilnosti: - 4 osi - Miza: 3540x1850 mm - Disk: premer 800 mm Credpfx Asx A A Nwepljb - Zanesljiv in enostaven za uporabo stroj

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Csdpfx Aey Aafxsplerb

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. Csdsx E Ahzepfx Aplerb 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Credsuiy Nyepfx Apleb Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: rabljeno, Leto izdelave: 2019, ELUMATEC - SBZ 140 ELUCAM - 2019 - 4 osi - Premiki X/Y/Z = 7400-7600/850/650 mm - Osa A 0-180 stopinj - Hitri premiki 60-65 m/min Cjdpfxsyl Shvs Aplsrb - Vreteno 24000 RPM, 11 kW S1 - ATC z 8 pozicijami - 2442 ur rezanja vretena - Pod napetostjo - Zelo dobro stanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Crsdpfxeyia Ezj Aplob

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Codpfemzbr Sex Aplsrb Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Leto izdelave: 2010, stanje: rabljeno, 4-osni obdelovalni center z 8-mestnim avtomatskim menjalcem orodij za aluminijaste ali PVC profile Največja dolžina obdelave: 3.100 mm Pomik Y-osi: 850 mm Pomik Z-osi: 650 mm Nihajni kot A-osi: 0° - 180°, največja hitrost vrtenja 21.000 min⁻¹ Csdpjxvp Nkofx Aplsrb Teža: približno 3.000 kg Operacijski sistem Windows 7, minimalno mazanje Zaznavanje in samodejno premikanje vpenjal, 6 pnevmatskih vpenjal za material Nakladanje je vključeno v ceno

Leto izdelave: 2003, stanje: rabljeno, 4-axis machining center with 8-position automatic tool changer for aluminum or PVC profiles Maximum machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm A-axis swivel angle: 0° - 180° max. Spindle speed: 21,000 rpm Windows operating system Minimum quantity lubrication system Clamp detection and automatic repositioning Cjdpfx Apouwq S Doljrb Chip conveyor integrated in the bed Chip extraction system Pendulum operation via two light barrier zones Loading included in the price Weight: approx. 4,500 kg

Stanje: dober (rabljeno), Leto izdelave: 2013, Dvostranska kapna žaga za aluminij Listi žage se lahko zavrtijo in nastavljajo po nagibu. Upravljanje E355 Vključno s krožnimi žaginimi listi in odsesavanjem Tehnični podatki: Najmanjša dolžina reza pri 90°: 375 mm Največja dolžina reza: 4500 mm Kot zasuka proti notranjosti pnevmatsko 90° - 45° (ročni nastavki do 22,5° navznoter in do 140° navzven z Csdpfx Apsyw R Rzelerb digitalnim prikazom) Kot nagiba proti notranjosti pnevmatsko 90° - 45° (vmesni koti ročno z digitalnim prikazom in revolverjskim prislonom) Premer lista žage: 550 mm Hitrost žaginega lista: 2250 1/min. Izhodna moč motorja: 4 kW Mere: pribl. 5790 / 1840 / 1985 mm Teža pribl.: 2110 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ PODATKI O STROJU Pnevmatski sistem Tlak: 8 bar Električni podatki Cjdpfxjxy Hcis Aplorb Tip priključka: 3/PEN Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Cedpfx Ajwwtyleplorb Dodatne tehnične specifikacije so na voljo na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Obdelovalne strani: 3, obdelovalni materiali: aluminij/jeklo, pomik X: 4000 mm, podajalna hitrost: 120 m/min, A-os: +/-110°, hitrost vretena: 18000 obr/min, držalo orodja: SK30, mesta za orodje: 8, max. dimenzije profila X/Y/Z: 4000mm/250mm/190mm, dimenzije stroja X/Y/Z: cca 5750mm/2100mm/2350mm, teža: cca 4000 kg, krmiljenje: Mecal. Na voljo dokumentacija. Ogled na lokaciji je možen. Crodpfx Apsyh Nv Holeb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Cedow Svmispfx Apljrb Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Heures machine : 13 066 h