Eigenbau Stroj Za Brušenje Cevi 10000 X 200 Mm nakup rabljenega (121.689)

Stanje: rabljeno, Leto izdelave: 2011, Pipe grinding machine – Custom-built - Pipe grinding machine with CE marking - Suitable for grinding or surface preparation of various pipes - Was used for galvanized steel pipes as a surface pre-treatment before painting - Could be modified for other materials (by using different sanding belts and possibly adapting the feed system) - Control: Mitsubishi - Automatic infeed and discharge from the machine Csdpfx Acsx E T Swo Njrc - Multiple pipes can be loaded, processed sequentially, and temporarily stored at the discharge station - Pipes are picked up by a gripper and fed through the machine to the discharge point - Including Felder RL125 extraction unit for dust extraction - Compressed air required for operation - Machine is sold without safety devices - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load of the grinding machine: 6.75 kW - Connected load of the extraction unit: 3 kW - Installation footprint (without extraction unit): 2,500 x 20,500 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Crodpfx Asvdal Asc Nsc Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 1979, Roundo valjar za pločevino/cevi. V zadnjih letih se je uporabljal predvsem za valjanje dimnih cevi s premerom 150–160 mm. V kompletu so štiri palete z valji, ki služijo za določitev premera cevi. S pomočjo pnevmatskega valja se konec odpre, da se izvleče zvita cev. Stroj sem preizkusil, vendar valji ne delujejo. Verjetno obstaja enostavna rešitev za to. Skupna teža stroja in valjev je približno 3–4 tone. Cjdpfx Acsyvqc Uo Nerc

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Cjdpfsy E Schsx Ac Norc Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: PLEIGER Model: HF 75 / 115 S 30 Control: Siemens Simatic panel Year of manufacture: 2002 Stroke speed, feed step 1: 4 - 20 m/min Stroke speed, feed step 2: 0.3 - 3 m/min Chuck rotation speed step 1: 300 rpm and 320 Nm Chuck rotation speed step 2: 100 rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Max. bore depth: 11,500 mm Spindle power: 55 kW Crodekvnc Sepfx Ac Njc Rotational speed: 300 rpm Dimensions (approx.): Length: 25,000 mm Width: 2,000 mm Height: 2,000 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, sourced from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Consequently, it does not constitute any representation or contractual terms. We recommend verifying all key details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Csdporx Rxtjfx Ac Nerc Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: novo, Leto izdelave: 2026, Max Ø 114mm. Straight and bent round tubes. Single grinding station. Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical pipes. The ML planetary belt system enables belt grinding without tube rotation in order to deliver the best possible results. The infeed system safely feeds straight tubes into the grinding station to ensure consistent and productive surface quality. Crsdpfx Acst Eaw Do Njc ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Belt speed (m/s): 3-22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: novo, Edge sanding machine HOLZKRAFT KSO 200 F - Demonstration machine - Relief rollers on the fence guides, with tiltable sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubber-coated sanding roller ----- Technical Data ----- Sanding belt dimensions: 3,000 x 200 mm, Worktable dimensions: 960 x 350 mm, Worktable height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Crsdpfx Acou R S Ers Noc Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Extraction port diameter: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new demonstration machine -

Stanje: rabljeno, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 Serial No. 49697 Year of manufacture: 1997 Grinding range: Ø 3 - 40 mm Point angle: 40° - 180° Motor power: 1.1 kW Grinding wheel dimensions: max. Ø 200 mm Grinding wheel speed: 2840 rpm Power supply: 400 Volt, 50 Hz Csdpjnzt A Hjfx Ac Nsrc - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, thread taps, countersinks, drills with reinforced webs, and drills with special grinds) - Precision six-jaw chuck Ø 125 mm - Drill point thinning device (motor power 0.18 kW) - Suitable for left- and right-hand cutting drilling tools thanks to interchangeable cams - Cam discs easily exchangeable for 2- or multi-edged tools - Includes 4 cam discs - Centering arbor for MT1, MT2, MT3, MT4 - Fitted with a white grinding wheel Ø 170 mm, 40 mm wide - Metal base with door and shelf - Adjacent wet grinding unit - Operating manual in PDF Space requirement (L x W x H): 900 x 850 x 1250 mm Weight: 220 kg Very good condition

Stanje: potreben popravila (rabljeno), premer brušenja: 1.295 mm, dolžina brušenja: 4.276 mm, Manufacturer: Farrel Model: 50 x 14 CNC Control: NUM 760 Year of Manufacture: 1970 Are you looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring outstanding accuracy and efficiency. Key Features: - Capable of concave grinding - Capable of convex grinding - NUM 760 CNC Control - 2 x fixed steady rests - Grinding wheels and flanges included Specifications Metric | US Standard ---|--- Centre height | 647 mm Grinding diameter Ø | 1295 mm Grinding length | 4267 mm Grinding wheel size | 914 x 152 mm Grinding wheel speed | 400 - 1200 rpm Coolant system | Yes Dimensions (approximate): - Length: 8500 mm - Width: 4500 mm - Height: 3200 mm - Weight: 78,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The data is offered in good faith, but accuracy cannot be guaranteed. As such, no representations or contractual terms are implied. We recommend verifying all critical details independently. Credpov Dia Aofx Ac Nsc

Stanje: dober (rabljeno), Manufacturer: Keilinghaus Type: PLS 1500 HY Specifications Metric / US Standard Max. swing over bed: 3000 mm Max. swing in gap: 5000 mm Ø Center height over bed: 1500 mm Distance between centers: 2600 mm Max. sheet thickness: 15 mm X-axis stroke: 1000 mm Y-axis stroke: 2800 mm Speed: 240 rpm Codpfokvnnkex Ac Norc Power: 75 kW Spindle nose: DIN 55027 - Size 15 DIN / Camlock Tailstock quill: 1200 mm Approximate dimensions Length: 10000 mm Width: 8000 mm Height: 4500 mm Weight: 60000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. All information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Codewpku Dspfx Ac Nsrc Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: dober (rabljeno), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting: up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Overhang: 500 mm Crodpfxswpud Aj Ac Noc Number of strokes: 3 – 38 m/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The data is supplied in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or terms of contract. We recommend verifying all critical information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Max Ø 114mm; Straight and curved round tubes; One grinding station; Grinding of straight and curved round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system allows for belt grinding without rotating the tube, delivering optimal results. The feeding system safely advances straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3-22 Feed speed (m/s): 1-5 Cjdpfetzkgbsx Ac Nerc Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Premer cevi (maks.): 28 mm, Kot upogiba (maks.): 180 °, upogibna sila (maks.): 7 t, skupna masa: 250 kg, Bending capacity: 3/8" – 2" Bending angle: 180° Rotary turret: 6-fold Installed bending tool: Ø 28 mm Country of origin: Netherlands Cjdpfewzchyjx Ac Nsrc Motor power: 3 kW Machine weight: 250 kg Machine dimensions (LxWxH): 1,000 x 800 x 950 mm

Stanje: zelo dobro (rabljeno), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-position adjustment Mandrel length: 4500 mm Crsdpfx Aen Smq Iec Nec Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 mandrels - Mandrel retraction device - Foot pedal - Adjustable bending speed Country of origin: The Netherlands Motor power: 7.5 kW Machine dimensions (LxWxH): 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Stanje: rabljeno, Deburring brush machine, tube deburring machine ERINI Type 250 Year of manufacture: approx. 1995 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1500 / 3000 rpm Power: 2.2 / 2.8 kW Cjdpfopu R Ngjx Ac Njrc Power supply: 380 Volt, 50 Hz - Material support - new deburring brush - Extraction connection Ø 100 mm Dimensions (L x W x H): 620 x 500 x 1150 mm Weight: 100 kg In good condition

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Crodpev S Ad Dsfx Ac Nsc Strip width: 600 – 2,000 mm Strip thickness: 6 – 15 mm Design: 4-Hi cassette

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. Cedpstmqi Defx Ac Norc The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Crodpfjpugwiox Ac Njc A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: dober (rabljeno), Leto izdelave: 1980, Rezalna škarja, škarje za pločevino, tabloškarje, ročne tabloškarje, pomožne tabloškarje - Mehanske tabloškarje - Širina reza: 1130 mm - Največja debelina reza: 4,0 mm - Oprema: zadnji prislon, stranski prislon, 3 nosilci Crjdpfoy Tyqvex Ac Noc - Pogon: 2,2 kW - Globina grla: 115 mm - Postavitvene mere: 2620/1685/V1365 mm - Transportne mere: 1215/1685/V1365 mm - Teža: 1250 kg

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski Crsdpfx Aev Tpxqjc Nsc - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Žaga za profile in cevi Proizvajalec: Hans Weber Maschinenfabrik GmbH Tip: PS-2 Leto izdelave: 2002 Tovarniška št.: PS 2 104 Tehnični podatki obratovanja: Dimenzije profila: širina: 200 mm, višina: 100 mm Dimenzije cevi: maks. premer: 100 mm Najkrajši cikel žaganja: pribl. 6 sek. Pomična pot vozička: maks. 400 mm Hitrost rezanja: pribl. 60 m/sek. Pritisk vpenjalne enote: do 1100 N (nastavljivo) Premer žaginega lista: 400 mm Mere: 1830 x 1000 x 1600 mm (DxŠxV) Teža: pribl. 500 kg Stanje: rabljeno, kot je videno Oprema: Credpsy Ulhisfx Ac Nsc Nova vzdrževalna enota za stisnjen zrak Nov inkrementalni dajalnik, vklj. z merilnim kolesom in priključnim kablom za merjenje dolžine Opomba: Žaga je bila v uporabi v izobraževalnem in raziskovalnem centru in ima zato zelo malo obratovalnih ur.

Leto izdelave: 2018, stanje: dober (rabljeno), Manufacturer: FACCIN Model: 4HEL 3590 Control: Siemens TOUCH Year of manufacture: 2018 Specifications Metric US Standard Roll width 3500 mm Sheet thickness at 3 x top roll Ø 80 mm Sheet thickness at 5 x top roll Ø 110 mm Sheet thickness during prebending 90 mm Top roll Ø 900 mm Top roll Ø Credpfskvm Nfsx Ac Noc 900 mm Bottom roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Bending speed 0-6 Adjustment, bottom roll 0-200 mm/min Adjustment, side roll 0-400 mm/min Top support Yes Side support Yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (estimated) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.