Durma Hrb-4 2513 nakup rabljenega (60.244)

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Gusdpfxod Ab H Ie Adkef Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control Gusdpjypbquefx Adksf IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Gujdsypbqnspfx Adkef Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Godoypbqhjpfx Adkouf Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations Guedpfxoypbqbe Adkof OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Guedpfx Adoypbp Djksf Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Max. bending capacity – structural steel: 16 mm Max. plate thickness without pre-bending at D=5x top roller: 16 mm Max. plate thickness without pre-bending at D=3x top roller: 13 mm Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm Max. plate thickness with pre-bending at D=5x top rollers: 14 mm Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox Gujdpfx Ajynm Hfjdkef Hydraulic side roller adjustment with electronic synchronization Hydraulic bottom roller adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rollers Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE standards OPTIONS: Upper and side plate supports NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended Gsdpfxjd Ab H Hj Adkjuf

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls Gujdpfx Asd Auacodkef • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Leto izdelave: 2024, stanje: novo, Control unit – with NC control Tapered bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding option) on the machine Machine frame made from stress-relieved steel 4-roll drive system – upper and lower rolls driven by hydraulic motors synchronized via planetary gears (> 430 mm) Electrical and hydraulic overload protection Lower roll pressure hydraulically adjustable Hydraulic roll brake to prevent sheet slipping Hydraulic swing-out of upper roll bearing for easy removal of the formed sheet Safety wire Induction-hardened rolls (HRC 54), crowned design ("bombing") Guedpjdzzyfsfx Adksf Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll opening: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg

Stanje: rabljeno, Leto izdelave: 2011, Tlak: 400 Dolžina upogibanja: 4050 Razmik med stojali: 3400 Moč motorja: 37,5 kW Teža cca.: 25.000 kg Dimenzije (D x Š x V): 5750 x 2110 x 3440 mm RAZPRODAJA ZALOG – NEVERJETNA CENA! CNC upogibni stroj DURMA AD-S 40400 (4 m x 400 t) (Nova cena cca. 170.000 EUR) Tehnični podatki: Proizvajalec: DURMA Model: AD-S 40400 Leto izdelave: 2011 Dolžina upogibanja: 4.050 mm Pritisna sila: 400 ton Osi: Y1, Y2, X, R + CNC-krmiljeno bombiranje Moč motorja: 37 kW Oprema in poudarki: - CNC bombiranje – motorizirano nastavljivo prek krmiljenja - Zgornje orodje: 1010/A/75° segmentirano, zamaknjeno - Matrica: Multi-V matrica - CNC-krmiljen zadnji bat - 2 roki za podporo pločevine na linearnih vodilih - CE skladna laserska varnostna naprava (Lasersafe) na zgornjem nosilcu - Stroj ustreza aktualnim CE predpisom - Vgrajena nova črpalka Stroj se prodaja v trenutnem stanju. Stroj je bil kupljen v okviru stečajnega postopka in nato prepeljan v našo halo. Osnovne funkcije "gor" in "dol" so bile preizkušene in delujejo. Poleg tega ne moremo dati nadaljnjih informacij o tehničnem stanju ali delovanju stroja. Ogled na lokaciji je možen po predhodnem dogovoru. Prodaja po ogledu in brez garancije. Gusdpfsvfy Sxex Adkjf Enkratna priložnost – na voljo takoj! Samo 1 kos na zalogi – neposredno z lokacije – brez čakalnih dob! Izkoristite to redko priložnost za visokozmogljiv stroj za delček cene novega.

Stanje: rabljeno, Leto izdelave: 2011, Pritisk: 400 Dolžina upogibanja: 4050 mm Razdalja med stojali: 3400 mm Moč: 37,5 kW Teža pribl.: 25.000 kg Dimenzije (D x Š x V): 5750 x 2110 x 3440 mm RAZPRODAJA ZALOGE – NEVERJETNA CENA! CNC upogibni stroj DURMA AD-S 40400 (4 m x 400 t) (Nova cena cca. 170.000 EUR) Tehnični podatki: Proizvajalec: DURMA Model: AD-S 40400 Leto izdelave: 2011 Dolžina upogiba: 4.050 mm Tlačna sila: 400 ton Osi: Y1, Y2, X, R + CNC vodena bombiranje Moč motorja: 37 kW Oprema in poudarki: CNC bombiranje – motorizirana nastavitev preko krmiljenja Zgornje orodje: 1010/A/75° – segmentirano, zamaknjeno Matrica: Multi-V matrica CNC vodeni zadnji prislon 2 nosilna roka za pločevino na linearnih vodilih CE skladna laserska varnostna naprava (Lasersafe) na zgornjem prečniku Stroj izpolnjuje aktualne CE predpise vgrajena nova črpalka Stroj se prodaja v trenutnem stanju. Stroj je bil pridobljen v okviru stečajnega postopka in nato prepeljan v našo halo. Osnovne funkcije 'gor' in 'dol' so bile preizkušene in delujejo. Dodatnih informacij o tehničnem stanju ali delovanju naprave ne moremo podati. Ogled na lokaciji je možen po dogovoru. Godpfsv Rtg Tox Adksuf Prodaja po sistemu 'videno-kupljeno' in brez garancije. Enkratna priložnost – takoj na voljo! Samo 1 kos na zalogi – neposredno s skladišča – brez čakalne dobe! Izkoristite to redko priložnost za visoko zmogljiv stroj za delček nove vrednosti.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Hydraulic 3-Roll Plate Bending Machine with Variable Axis HRB 3V by Durma Gsdpfxed E Ib Is Adkjuf Technical Data: Bending length: 3100 mm Bending capacity Ødx1.5: 51 mm Bending capacity Ødx5: 60 mm Pre-bending capacity Ødx1.5: 39 mm Pre-bending capacity Ødx5: 35 mm Top roll diameter: 520 mm Bottom roll diameter: Side roll diameter: 470 mm Max. roll opening: Length: 6600 mm Width: 2250 mm Height: 2670 mm Working height: 1920 mm Weight: 40,500 kg Motor power: 45 kW + 18.5 kW Min. additional top roll diameter: Oil tank capacity: 1000 liters Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: novo, Dolžina pločevine: 3100 Debelina pločevine: 13 Upogibanje: 10 Skupna potrebna moč: 15 Teža približno: 10 Godpfx Asd Ab H Ejdkouf Dimenzije (DxŠxV): 4,88x1,16x1,18 Slika podobna Premer valja (zgoraj/spodaj): Ø270 mm Dolžina upogibanja: 3.100 mm Največja debelina pločevine za običajno upogibanje: 13 mm Največja debelina pločevine za pred-upogibanje: 10 mm Pred-upogibanje / Upogibanje: 8 mm / 10 mm (glede na polmer Ød × 1,5) CE-standard Spremenljiva hitrost Krmilna enota – 7-palčni zaslon na dotik Stožčasto upogibanje Induktivno kaljeni valji Pozicioniranje stranskih valjev preko elektronsko sinhroniziranega PLC Spodnji valj trdno mehansko sinhroniziran Varnostni mehanizem za varjenje na stroju Ograja za sprostitev napetosti iz jeklene konstrukcije Ležajni valji Hidravlično odpiranje zgornjega valja Zgornji in spodnji valji poganjani s hidravličnim motorjem in planetnim menjalnikom Električna in hidravlična zaščita pred preobremenitvijo Hidravlično nastavljiv pritisk spodnjih valjev

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od oddaje naročila Država izvora: Turčija Cena: 72.300 € Mesečni obrok ob finančnem lizingu: 1.366,47 € Sila upogibanja: 40 ton Dolžina upogiba: 1250 mm Osi: Y1 / Y2 / X in R os Gib: 200 mm Razdalja med stojali: 1050 mm Izstop v stranskem stojalu: 250 mm Višina vgraje: 440 mm Pogon: servomotorna vretenčna enota Hitrost hitrega giba osi Y: 115 mm/s Delovna hitrost osi Y: 10 mm/s Hitrost umika osi Y: 115 mm/s Zadnji omejevalnik, gib osi X: 650 mm Zadnji omejevalnik, gib osi R: 250 mm Višina mize: 1000 mm Moč motorja: 7,2 kW Dolžina: 1950 mm Širina: 1450 mm Višina: 2650 mm Teža: 3600 kg SERIJSKA OPREMA: Servomotorna vretenčna enota 4 osi (Y1, Y2, X in R) Barvna grafična upravljalna enota DELEM DA-66S - 17" barvni zaslon na dotik - 3D-vizualizacija v simulaciji in proizvodnji - Primerno za celotne aplikacije Windows - Združljivo z DelemModusys - USB- in periferni vmesnik - Podpora za uporabniško specifične aplikacije - Vmesnik za senzorje, upogibanje in korekcijo Servomotorno gnani zadnji omejevalnik na linearnih vodilih in krogličnih vretenih CNC-upravljano izbočevanje Zgornje orodje 1010/A/75°, razdeljeno in upognjeno 4-V matrica 60x60 2009 (V = 16, 22, 35 in 50 mm) Laserska zaščitna naprava Fiessler AKASam, nameščena na zgornji prečki Nosilci za pločevino na linearnih vodilih Gujdpfxoynm Aye Adkjf Oprema v skladu s standardi CE Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI PREDNOSTI TE IZVEDBE: - višja produktivnost v primerjavi s klasičnimi hidravličnimi upogibnimi presami - skoraj brezčasen odziv na signal stopalke - nizka poraba energije - kompaktna pogonska vretenčna enota z majhnim številom komponent - brez hidravličnih komponent Možnosti: Osi Z1/Z2 CNC-upravljalna enota DELEM DA-69S 3D vključno z PC-programsko opremo Profile-S s funkcijo uvoza 3D-datotek Hitra sponka za zgornje orodje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 320 t, hod: 365 mm, skupna dolžina: 5.300 mm, skupna širina: 1.900 mm, skupna masa: 23.000 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, DURMA AD-R 40320 CNC-hidravlična upogljalna stiskalnica – leto izdelave 2018 Naprodaj je DURMA AD-R 40320 CNC-hidravlična upogljalna stiskalnica s 320 t silo stiskanja in 4.050 mm dolžino upogiba. Stroj je izdelan leta 2018, ima razmeroma malo delovnih ur in je v zelo dobrem, vzdrževanem stanju. Tehnični podatki: • Sila stiskanja: 320 t • Dolžina upogiba: 4.050 mm • Hod: približno 365 mm • Leto izdelave: 2018 • Nadzorovana s sistemom CNC • Stanje: zelo dobro / vzdrževano Gedpfezt A Axsx Adkeuf • Malo delovnih ur Stroj si lahko ogledate po predhodnem dogovoru.

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €94,120 Leasing rate: €1,778.87 Press force: 175 t Bending length: 4050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between frames: 3600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: Hydraulic Rapid traverse (Y-axis): 160 mm/s Working speed (Y-axis): 10 mm/s Return speed (Y-axis): 140 mm/s Backgauge speed (X-axis): 500 mm/s Backgauge speed (R-axis): 350 mm/s Backgauge travel (R-axis): 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 5250 mm Width: 1700 mm Gjdpfxswiqr Nj Adkjuf Height: 2850 mm Weight: 12,780 kg 3 axes (Y1, Y2, X) CNC controller: DT-15 - 15" 2D graphic display - Intuitive touchscreen control (easy contour drawing with finger) - User-friendly dialog programming - Automatic calculation of bending sequence - Automatic calculation of blank size - Graphical product and tool memory - Correction feature - USB interfaces for backup and program transfer - PC software, program creation on PC and transfer to machine via USB Servo-driven backgauge with linear guides and ball screws Backgauge with finger blocks on double linear guides CNC-controlled crowning Top tool 1010 / A / 75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Linearly guided sheet support arms CE-compliant Oil filling User manual in German or English ADVANTAGES OF THE AD-S SERIES: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides - More available options, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls … Options: R-axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (STEP, IGES, and DXF file import) CNC controller SKY22 CNC controller Delem DA66 S CNC controller Delem DA-69S 3D incl. Profile-S PC software with 3D file import capability Quick-release lever for the top tool

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Moč 160 t Dolžina upogiba 4100 mm Razdalja med stojali 3100 mm Višina namestitve 370 mm Gib zgornjega stroja 200 mm Izložek 500 mm Hitrost premika 100 mm/s Delovna hitrost 9,0 mm/s Gjdpfx Adozrzt Hekouf Hitrost vračanja 86,0 mm/s Delovna višina približno 900 mm Zadnji oporni člen - nastavljiv, maks. 500 mm Krmilnik CYBELEC Količina olja 150 l Skupna poraba energije 15,0 kW Teža 12000 kg Dimenzije (D-Š-V) 5100 x 2100 x 2750 mm Nova cena ~ 85.000 evrov iz servisnega podjetja dobro ohranjeno (!!) vključno s posebnimi dodatki - v preverjenem stanju - video stroja - ?v=pleltYCkXDQ Oprema: - elektrohidravlična CNC stiskalnica za upogibanje - z nadzorno enoto DELEM CNC * nagibna upravljalna plošča, spredaj desno * knjižnica orodij in programov * enostavno CNC programiranje - CNC nadzorovane osi: Y1 + Y2 + X + R + CNC izbočenje - CNC elektro-motoriziran zadnji oporni člen (os X) * z 4 ročno nastavljivimi opornimi prsti (os Z) - CNC elektro-motorizirano nastavljanje višine (os R) - WILA - CNC izbočenje pod mizo - WILA elektrohidravlična prijemna naprava za orodja na vrhu * vključno s kompletom 28° koničnih orodij * vključno s hidravlično agregatom WILA - WILA ročna prijemna naprava za orodja na spodnji strani * vključno s adapterjem za matrice (širina 77 mm) * vključno s podstavkom za orodja WILA (širina 13 mm) - 2 x sprednja nastavljiva oporna roka - stranska zaščitna naprava (nagibna vrata) - zadnja zaščitna naprava (nagibna vrata) - 1 x pedala za prosto upravljanje - navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, stiskalna sila: 204 t, hod: 185 mm, skupna širina: 2.400 mm, skupna višina: 2.850 mm, skupna masa: 14.050 kg, največja dolžina izdelka: 5.050 mm, Upogibni stroj iz leta 2003. Ta Durma HAP 40200 ima pritisk 200 ton in dolžino upogibanja 4050 mm. Deluje s 6 hodi na minuto in ima dolžino hoda 185 mm. Če iščete kakovosten upogibni stroj, razmislite o Durma HAP 40200, ki je naprodaj. Za dodatne informacije nas kontaktirajte. • Krmilni sistem: Durma ENC 310 • Hodov na minuto: 6/min • Največji pritisk: 295 kg/cm² (4278 psi) • Kapaciteta rezervoarja za olje: 150 l • Teža zgornjega orodja: 173 kg • Teža spodnjega orodja: 312 kg Guedszpbauopfx Adkjf Tehnične specifikacije Dolžina upogibanja: 4050 mm

Stanje: rabljeno, Leto izdelave: 2000, Dolžina pločevine: 4100 mm Debelina pločevine: 12 mm Skupna priključna moč: 30 kW Teža cca: 17.350 kg Dimenzije (D x Š x V): 4750 x 3400 x 2350 mm Zadnji naslon: 1000 mm Hodi/minuto: 8 Hidravlične giljotine za natančno rezanje pločevin do dolžine 4100 mm in debeline materiala 12 mm. Oprema: - Nihajno rezanje - NC-predizbira upravljanje ELGO za zadnji naslon - Motoriziran zadnji naslon do 1000 mm na kroglastih vretenih, zložljiv - Pregledna nadzorna plošča na vrtljivem nosilcu - Hidravlični pritiskači, nameščeni tik ob rezalnem robu - Nožni pedal - Centralno ročno nastavljanje rezišča Dodatki: Gedozd H U Hspfx Adksuf - 1 stranski naslon z lestvico, T-utorom in nagibnim zatičem - 3 podporna ročica za pločevino z T-utorom - Enostavna menjava in ponovno brušenje nožev - Nastavljiva dolžina reza za ekonomično obdelavo - Spodnji nož 4x obračljiv - Zgornji nož 2x obračljiv Dodatne podrobnosti: - Navodila za uporabo v nemščini

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €159,300 Leasing rate: €3,010.77 Pressing force: 320 t Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,600 mm Throat depth in side frame: 410 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Length: 5,300 mm Width: 1,910 mm Height: 3,230 mm Weight: 20,100 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy contour drawing with your finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the blank length for sheet cutting - Automatic bending sequence calculation - Graphical product and tool memory - Correction capabilities - USB ports and Ethernet connection for import, backup, and program export - Operating system Windows - Import support for IGES, STEP, DXF files Gedoynm Atopfx Adkjuf Backgauge with servo drive on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, split and goosenecked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during ram movement - Low energy consumption - Low noise emissions - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €74,800 Lease payment: €1,413.72/month Pressing force: 40 tons Bending length: 2,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 200 mm Distance between uprights: 1,700 mm Throat depth (side frame): 350 mm Installation height: 440 mm Drive system: servo motor-driven spindle Rapid traverse (Y axis): 180 mm/s Working speed (Y axis): 10 mm/s Return speed (Y axis): 115 mm/s Backgauge travel range (X axis): 650 mm Backgauge travel range (R axis): 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 2,600 mm Width: 1,450 mm Height: 2,650 mm Weight: 4,400 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X, and R) - Color graphics controller DELEM DA-66S • 17" color touchscreen Gjdpfx Ajynm A Hedkjuf • 3D visualization in simulation and production • Suitable for full Windows applications • Compatible with Delem Modusys • USB and peripheral interface • User-specific application support • Sensor, bending, and correction interface - Servo-driven backgauge on linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and gooseneck - 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Low energy consumption - Compact spindle drive unit with a low number of individual components - No hydraulic components Options: - Z1/Z2 axes - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export Guodpfx Aoynmxnodkef - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €187,100 Leasing rate: €3,536.19 Press force: 400 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3400 mm Gjdpfxewir A Ae Adkouf Throat depth (side frame): 410 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Motor: 2 x 11 kW Length: 5750 mm Width: 2110 mm Height: 3450 mm Weight: 27,780 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easily draw the bending contour by finger) - User-friendly dialog-based programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of developed length for blank cutting - Automatic bending sequence calculation - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Sheet support arms on linear guides Equipment in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with option to import 3D files

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €231,900 Pressing force: 400 tons Bending length: 6050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between uprights: 5100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 150 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 150 mm/s Backgauge travel X-axis: 750 mm Oil tank: 160 l Length: 7500 mm Width: 2110 mm Height: 3810 mm Weight: 34,600 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (simple drawing of the bending contour with your finger) - User-friendly programming via dialog, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory Gujdpfx Adowir Avekjf - Correction options - USB ports and Ethernet connection for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and goosenecked 4-way die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability