Stroj za okroglo krivljenje pločevine - 4 valjiHESSE by DURMA
HRB-4 30300
Stroj za okroglo krivljenje pločevine - 4 valji
HESSE by DURMA
HRB-4 30300
Stalna cena brez DDV
98.600 €
Stanje
Novo
Lokacija
Avstrija 

Prikaži slike
Prikaži karto
Podatki o stroju
- Opis stroja:
- Stroj za okroglo krivljenje pločevine - 4 valji
- Proizvajalec:
- HESSE by DURMA
- Model:
- HRB-4 30300
- Stanje:
- novo
Cena in lokacija
Stalna cena brez DDV
98.600 €
- Lokacija:
- 2351 Wiener Neudorf, Österreich

Klic
Podrobnosti ponudbe
- ID ponudbe:
- A21343012
- Št. reference:
- 1069-304
- Nazadnje posodobljeno:
- dne 27.02.2026
Opis
Condition: new
Delivery time: approx. 12–14 weeks from order
Country of origin: Turkey
Price: €98,600
Leasing rate: €1,863.54
Bending length: 3,100 mm
Max. bending capacity – structural steel: 16 mm
Max. plate thickness without pre-bending at D=5x top roller: 16 mm
Max. plate thickness without pre-bending at D=3x top roller: 13 mm
Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm
Max. plate thickness with pre-bending at D=5x top rollers: 14 mm
Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm
Top roller diameter: 300 mm
Bottom roller diameter: 300 mm
Side roller diameter: 240 mm
Max. opening: 50 mm
Working height: 1,140 mm
Motor power: 18.5 kW
Length: 5,310 mm
Width: 1,660 mm
Height: 1,140 mm
Weight: 11,100 kg
4 rollers
PLC
Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox
Nwodpfeynm Hfjx Ag Toc
Hydraulic side roller adjustment with electronic synchronization
Hydraulic bottom roller adjustment with mechanical synchronization
Adjustable clamping pressure
Variable roll speed
Hardened rollers
Cone bending device
Hydraulic drop-end bearing
Movable control panel
Overload protection
Operating manual in GERMAN and ENGLISH
Equipment according to CE standards
OPTIONS:
Upper and side plate supports
NC control
IMPORTANT POINTS FOR CONICAL ROLLING:
Max. plate thickness is 50% of nominal capacity
Cone length may be max. 30% or must be more than 60% of the roller length
Hardened rollers are recommended
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Delivery time: approx. 12–14 weeks from order
Country of origin: Turkey
Price: €98,600
Leasing rate: €1,863.54
Bending length: 3,100 mm
Max. bending capacity – structural steel: 16 mm
Max. plate thickness without pre-bending at D=5x top roller: 16 mm
Max. plate thickness without pre-bending at D=3x top roller: 13 mm
Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm
Max. plate thickness with pre-bending at D=5x top rollers: 14 mm
Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm
Top roller diameter: 300 mm
Bottom roller diameter: 300 mm
Side roller diameter: 240 mm
Max. opening: 50 mm
Working height: 1,140 mm
Motor power: 18.5 kW
Length: 5,310 mm
Width: 1,660 mm
Height: 1,140 mm
Weight: 11,100 kg
4 rollers
PLC
Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox
Nwodpfeynm Hfjx Ag Toc
Hydraulic side roller adjustment with electronic synchronization
Hydraulic bottom roller adjustment with mechanical synchronization
Adjustable clamping pressure
Variable roll speed
Hardened rollers
Cone bending device
Hydraulic drop-end bearing
Movable control panel
Overload protection
Operating manual in GERMAN and ENGLISH
Equipment according to CE standards
OPTIONS:
Upper and side plate supports
NC control
IMPORTANT POINTS FOR CONICAL ROLLING:
Max. plate thickness is 50% of nominal capacity
Cone length may be max. 30% or must be more than 60% of the roller length
Hardened rollers are recommended
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2006
Pošlji zahtevo
Telefon & Faks
+43 2236 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake



