DURMA - 3 zvitki

Durma Rundbiegemaschine HRB 3V by Durma

Stanje: novo, Leto izdelave: 2026, skupna masa: 1.000 kg, Najboljša kakovost 3D vrtalna miza 3000 x 1500 x 200 mm, mreža 100 mm, debelina plošče 20 mm, premer lukenj 28 mm, Planirano obdelana površina, zelo masivna, teža cca 950 kg S 6-krat nastavljivim nogam mize Iasdpfxsx Nihio Adkop Cena brez dodatne opreme, doplačilo 500 € Zapakirano v leseni zaboji, povprašajte za dostavo

Stanje: dober (rabljeno), Leto izdelave: 2000, 1 used 4-roll plate bending machine Manufacturer: Stöting Model: VB 322 Iaedpfx Aov Ibkbjdksp Serial number: 1591 Year of manufacture: 2000 with Acon control system Working length: 1000 mm Max. sheet thickness: 12 mm Pre-bending capacity: 8 mm Top roll diameter: 250 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Dimensions (L): 3200 mm Width: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 t

Leto izdelave: 1988, stanje: rabljeno, Compressor unit Type 178 A CD E Delivery rate: 4,760 l/min Iodpfx Aogw Dqpsdkoap Operating pressure: 9 bar Power: 30 kW

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h Ijdpod H Rf Tefx Adkoap • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Leto izdelave: 1977, stanje: rabljeno, Turning diameter: 700-1500 mm Clamping length: 3000 mm Track gauge: 1676 mm Control system: Machine weight approx. 60 t Rafamet UBC 150 Wheelset Lathe for Railway Wheelsets Factory No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Iedpfx Adouddglokjap Standard processed wheelset track gauge: 1435 mm Supported track gauges: 1435 mm, 1524 mm, 1676 mm Processable wheelset length: 1640-3000 mm Wheelset running diameter: 700-1500 mm Driving diameter: 350-1350 mm Wheel tyre width: up to 140 mm Machine overall dimensions: 8700 x 3600 x 3250 mm Total installed power: 172 kW Machine weight: 59,200 kg Feed rate speeds Lifting and centering device: 2500 mm/min Headstocks: 1320 mm/min Quills: 550 mm/min Carriages (longitudinal direction): 1300 mm/min.

Leto izdelave: 2024, stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Iasdpfx Aoftdh Ijdkep Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Leto izdelave: 2013, stanje: dober (rabljeno),  Plazmijska rezalna in odsesovalna miza, dimenzije 2.500 x 6.000 mm.  Portalni most.  Voziček s servo pogoni (za pozicioniranje portalnega mostu v X-smeri).  Strojna tirnica, dolžina 8 m.  Profili HEB450 za temelje strojne tirnice, 8 m.  Plazemska rezalna enota Hypertherm HPR 400XD, 1 kos.  Plazemska poševna rezalna enota, vključno z avtomatskim sistemom za nadzor višine.  Enota za odsesavanje dima Filtercube 4H za plazemsko rezalno enoto.  Plamenska rezalna gorilnika, 3 kosi.  Avtomatski sistem za nadzor višine IHT M4000 CAP za plamensko rezalno enoto, 3 kosi.  Nosilec gorilnika za plamenski gorilnik (motoriziran).  Nosilec gorilnika Single Drive za plamenski gorilnik, 2 kosa (avtomatsko pozicioniranje gorilnika).  Laserski kazalnik (za poravnavo in pozicioniranje gorilnika).  Računalniški nadzorni sistem (sestavljen iz industrijskega PC-ja in nadzorne plošče).  Nadzorna programska oprema 'VACAM Machine Edition' (vključno s programsko opremo VaCad in VaNest ter spletno podporo).  Avtomatska razporeditvena programska oprema Sigmanest "Powerpack" (vključno s 3-dnevnim usposabljanjem za največ 3 osebe pri podjetju Voortman Holland (brez potnih stroškov ter nastanitve in prehrane) ter 1-dnevno spletno podporo).  Gumb za nujni izklop z izklopno vrvico. Iajdpfxstp Dhpe Adkep  Letnik izdelave: 2013.

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Ijdpfx Adovxwkfskjap Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 804, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, najv. debelina pločevine: 16 mm, najv. debelina jeklene pločevine: 16 mm, skupna masa: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic adjustment of the rolls Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair frame around the machine can be purchased. Iodpfevxbm Rsx Adkoap

Leto izdelave: 1963, stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Iedpfoh I Edvox Adkoap