Dimter Profipress L2500 nakup rabljenega (100)

Stanje: rabljeno, Dimter Profipress L 2500 Leto izdelave: 2006 Dimenzije: • Širina lamele (za plošče): 30-150 mm Gbedpfx Ahsyhggremsn • Debelina: 11-60 mm • Vhodna dolžina: 800-2500 mm • Širina plošče: spremenljiva, do maks. 1300 mm • Širina polnjenja na cikel: min. 650 mm / maks. 1300 mm • Integrirana hidravlična enota za moč stiskanja in hidravlične motorje • Elektrika: • Obratovalna napetost: cca 400 V / 50 Hz • Električna priključna moč za 40 kW HF generator: 56 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. This robust used gluing press features a pressing table measuring approximately 2500 x 1300 mm and a sturdy base frame. It is equipped with a motor-driven multifunction pusher and an automatic gluing station with a precision glue head. Suitable for both softwood and hardwood applications, it ensures uniform pressure distribution and high vertical pressure for minimal displacement. Contact us for further information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30-150 mm • Thicknesses: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Max. fill area per cycle: 3.25 m² • Note: The max. usable press width depends on the individual lamella widths • For multiple-row operation, the filling widths can vary by up to 15 mm. • Minimum contact surface per pressing cycle: ≥ 100 cm² • Pressing performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² Gedpox D I Nrofx Ahmebn • Press table and construction: • Press table area: approx. 2500 x 1300 mm • Sturdy base frame with lower press table made of stainless steel (ground electrode) • Upper pressure plate with hydraulic "anti-rebound" motor for high vertical pressure and minimal displacement • Special hydraulic pressure elements provide uniform joint pressure and compensate for tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically moveable to current fill width • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connected load of the press (without options): 7 kW • Electrical connected load for 40 kW HF generator: 56 kW • Control and safety: • Control cabinet and operator panel • Protective cover Additional Equipment • Extended collecting table to 3700 x 1300 mm (with stainless steel-topped wooden support) • Motor-driven multifunction pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and cleaning system for glue head • Modem with software for online connection

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Weinig Dimter Profipress C 2800 P - 6 m gluing press, year 2009 Gedpfxeyvgiae Ahmobn Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of laminated panels and softwood glued components. The press is engineered for efficient production using PVAC adhesive (class D2 / D3), enabling processing of material within defined width, thickness, and input length ranges. According to the documentation, this model can process material with a width from 30 to 80 mm, thickness from 15 to 40 mm, and input length from 2100 to 2800 mm. The machine enables output panels with variable widths from 600 to 1200 mm. For short pieces, the collection distance ranges from 700 to 1400 mm. The capacity is up to 10 to 15 feed cycles per minute depending on input width. The Profipress C 2800 P - 6 m is intended for softwood applications. Maximum permissible material warping is 5 mm per meter. The machine documentation also provides recommended working conditions, including an ambient temperature of 15 to 30°C and air humidity of 40 to 65%. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Output: max. 10–15 feeds/min, depending on input width - Wood width: 30–80 mm - Wood thickness: 15–40 mm - Input length: 2100–2800 mm - Collection distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Wood type: Softwood - Allowed curvature: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended working temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for the production of glued laminated panels - Machine from the renowned Weinig Dimter brand - Throughput up to 10–15 feeds per minute - Capability to produce panels with variable widths - Suitable for processing softwood - Compatible with standard PVAC D2 / D3 adhesives - Industrial application for joinery workshops and production plants

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, delovna širina: 230 mm, skupna masa: 2.500 kg, največja hitrost vretena: 6.000 obr/min, Ta 5-vretena WEINIG DIMTER PROFIMAT 23 E je bila izdelana leta 1998. Ima delovno širino 230 mm in razpon delovne višine 8–120 mm. Stroj deluje s hitrostjo vretena 6000 min⁻¹ in ima podajalno hitrost 5–24 m/min. Če iščete visoko kakovosten stroj za obdelavo lesa, razmislite o modelu WEINIG DIMTER PROFIMAT 23 E, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Gbjdpfx Aezaq Tajhmon • Opis stanja: Ni obnovljeno – brez garancije • Delovna višina: 8–120 mm • Število vreten: 5 (zgoraj, desno, levo, spodaj, zgoraj) • Podajalna hitrost: 5–24 m/min • Skupna priključna moč: pribl. 25 kW • Dolžina podajalne mize: pribl. 2000 mm

Stanje: rabljeno, Leto izdelave: 2007, Višina reza 175 mm Gbjdjy Tpqfepfx Ahmjn Širina reza 750 mm Moč motorja 5,5 kW Premer žaginega lista 550 mm Podmizna prečna žaga Weinig tip OptiCut C700 za varno in natančno kapanje masivnega lesa, zlasti pri trdih in težkih vrstah lesa z velikimi preseki. Stroj deluje s pnevmatsko vodeno žagarsko enoto, dvoročnim upravljanjem in pritisnim prislonom ter je idealen za žage, leseno gradnjo in industrijsko obdelavo masivnega lesa.

Stanje: rabljeno, Leto izdelave: 2005, Premer žaginega lista: 500 mm Gbodpfx Aoy S Di Tjhmon Višina reza: 90 mm Moč motorja: 7,5 kW Vhodna dolžina: 4.500 mm Širina reza: 300 mm Optimirna prečna žaga Weinig/Dimter tip Opticut S90 za avtomatsko dolžinsko optimizacijo in natančno kapiranje masivnega lesa. Stroj zazna napake v lesu in zagotavlja maksimalen izkoristek materiala z inteligentno optimizacijo reza. Idealna za industrijske proizvodne linije in visoko zmogljivo obdelavo lesa.

Stanje: rabljeno, Leto izdelave: 2004, Maksimalna širina reza: 700 mm Maksimalna višina reza: 120 mm Maksimalni premer žaginega lista: 700 mm Avtomatska optimizacijska kapna žaga (potisna žaga) Dimter tip OptiCut 700 za kapanje zelo širokega lesa po napakah (fluorescenčna kreda) in dolžinah. Gbodox Eblvjpfx Ahmen Vhodna dolžina: maks. 5.500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 100 mm, pomik po osi Z: 142 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: WS 400-20, CNC machining centre from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It is equipped with a powerful crosscut saw with spindle speeds of up to 3,000 rpm and a tenoning spindle motor output of 15 kW. If you are looking for high-quality CNC machining capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Crosscut saw motor power: 3.7 kW • Crosscut saw spindle speed: 2,800–3,000 rpm • Max. tool diameter for crosscut saw: 400 mm • Crosscut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 pcs • Tenoning spindle diameter: 50 mm Gjdoy Ixpaopfx Ahmebn • Tenoning spindle clamping length: 400–640 mm • Max. tool diameter for tenoning spindle: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (cutting circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of top horizontal profiling unit: 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Max. tool diameter for horizontal profiling unit: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Transportni trak Transportni trak Pasovni trak Transportni trak D 7600 x Š 350 x V 900 mm Širina pasu 240 mm Trofazni permanentni magnetni motor Rexroth Gsdpfxovn Sk Ss Ahmsbn očiščen, popravljen in funkcijsko preizkušen

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This WEINIG Unimat 500 was manufactured in 2005. The robust woodworking machine offers a working range of 230 x 120 mm and five spindles, ensuring efficient operation with variable feed speeds ranging from 4 to 30 m/min. The spindle power is 4 kW for the infeed and outfeed spindles, and 7.5 kW for the right/left and top spindles. Take advantage of this opportunity to purchase the WEINIG Unimat 500 woodworking machine. Contact us for further information about this machine. • Grooved guide and hydraulic nuts • Working range (W x H): 230 x 120 mm Gjdpfx Aoyaihpjhmebn • Number of spindles: 5 • Variable feed speed: 4 - 30 m/min • Spindle power: bottom (infeed): 4 kW / right / left: 7.5 kW each / top: 7.5 kW / bottom (outfeed): 4 kW Additional equipment • Includes approx. 70 Z4 cutterheads • Several hundred new blank knives with serrated backs It is possible to purchase the WEINIG Unimat 500 separately (without the Weinig Rondamat 931 profile knife grinding machine and additional tools) at a price of €37,000.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, I am selling a set of 3 GRECON DIMTER belt conveyors suitable for industrial use, for example in the wood industry or for material handling, etc. Total length of each conveyor: 2.00 m Gsdpfjt Rt I Hex Ahmebn Belt width: 300 mm Drive with electric motor: 0.37 kW / 0.55 HP Fully operational. Available immediately.

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2006. Gbsdpoxtxi Ijfx Ahmjn Moč motorja: 7,5 kW Avtomatska vhodna miza 4,10 m (pretočni sistem) Avtomatska izhodna miza 6 izmetalnikov na desni izhodni mizi. Optimizacija z avtomatskim zaznavanjem napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumenti vključeni.

Stanje: dober (rabljeno), Leto izdelave: 1992, Fully automatic programmable cross-cutting with additional mark detection for defect removal via LUT system Gbjdpfx Asl H E Taehmjn Infeed conveyor 6 m 6 discharge stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency inverter issue.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, največja višina reza: 250 mm, globina reza: 200 mm, največja širina rezanja: 250 mm, skupna dolžina: 25.000 mm, leto zadnje generalne obnove: 2025, Latvijas kokapstrādes uzņēmums pārdod Weinig Dimter OptiCut 304 L optimizācijas šķērgriezes līniju. Iekārtai ir bijuši tikai divi īpašnieki, abi labi zināmi uzņēmumi Latvijā. Pēdējos 8 gadus mēs paši esam ekspluatējuši šo iekārtu. Pārdošanas iemesls – nesen iegādāta jauna Weinig iekārta. Iekārta ir pilnībā darba kārtībā un šobrīd uzglabāta apsildāmās telpās, gatava nākamajam īpašniekam. Iekārta darbojusies tikai vienā maiņā. Aprīkota ar 5 šķirošanas cilindriem, tomēr šķirošanas konveijeru iespējams pagarināt un uzstādīt papildu šķirošanas cilindrus, ja nepieciešams. Iekārtu var apskatīt un demonstrēt darbībā mūsu ražotnē. Regulāri veikta apkope un remontdarbi visa ekspluatācijas laika gaitā, lai nodrošinātu maksimālu produktivitāti, rentabilitāti un augstas kvalitātes optimizācijas rezultātus. Iekārta strādā ar augstu precizitāti. Nav veiktas izmaiņas no rūpnīcas konfigurācijas. Rezerves daļas vienmēr iegādātas pie oficiālā Weinig izplatītāja Latvijā. Iekārta apskatei un pārbaudei pieejama Kuldīgā, Latvijā. Ir pieejamas arī dažas rezerves daļas šai iekārtai. Pieejama visa ražotāja Weinig oriģinālā dokumentācija. Atsevišķi piedāvājumā ir arī Weinig pirkstu savienojuma līnija, kas iegādāta kopā ar šo iekārtu. Skatiet mūsu citu sludinājumu vai jautājiet pēc papildinformācijas. Lai saņemtu papildu informāciju, lūdzu, sazinieties ar mums pa tālruni vai e-pastu. Nodrošināsim visu tehnisko informāciju, pieejami arī papildu attēli un video pēc pieprasījuma. Gjdsza Iadspfx Ahmebn

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljeno optimizacijsko prečno žagalno linijo WEINIG Dimter OPTICUT S75-4, letnik 2004. Proizvajalec: WEINIG Dimter Model: OPTICUT S75-4 Letnik: 2004 Gjdpfey S T Uxjx Ahmobn Stanje: rabljeno ID kategorije: 171 ID tipa: 2446 Tip: optimizacijska prečna žagalna linija Če imate vprašanja ali želite več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: skoraj kot novo (rabljeno), Spare parts + accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kupfermühle Rex Cook Bolinders Gbjdpfx Aelifbdohmsn Dimter GreCon Just inquire.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, montažni premer: 50 mm, vrsta vhodnega toka: trifazni, premer orodja: 50 mm, dolžina orodja: 330 mm, vhodna frekvenca: 50 Hz, Naprava za prednastavitev orodja WEINIG Opticontrol Premer krožnega gibanja: 0 - 300 mm Gbedjxwnvropfx Ahmon Dolžina orodja: 0 - 330 mm Premer stebla: 50 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, pogonska enota žage: 15.000 W, moč servomotorja: 11.000 W, Stroj popolnoma obnovljen / kot nov z novo električno napeljavo nova Siemens S7 krmilna enota Izvedba ob naročilu Gedpfx Asv Diy Aehmebn Kapovalni avtomat z zaznavo kredne črte Preseki lesa 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Premer žaginega lista 650/700 mm Podajalna hitrost 120 m/min Motor žage 15 kW Servo pogon SEW 11,00 kW s pretvornikom Električno nastavljanje debeline

Stanje: potreben popravila (rabljeno), Funkcionalnost: nepreverjeno, Keilzinken naprava dimter HK 400 Stroj za utore (keilzinken) za lesne pakete Vhodne vhodne dolžine: 800–6.000 mm Višina rezkanja: 285 mm, opcijsko 300 mm Barva: Modra Sestavljeno iz: Poz. 01 Pakiranje Poz. 02 Paketni valjčni transporter Poz. 03 Centralni rezkar Poz. 04 Paketni valjčni transporter Poz. 05 Razdeljevalnik paketov Poz. 06 Prečni verižni transporter Poz. 07 Dovajalni valjčni transporter Poz. 08 Postopni stiskalni stroj Poz. 09 Podajalna enota Poz. 10 Krožna odrezovalna žaga Vključno z elektro omaro Naprava je potrebna popravila in se prodaja v trenutnem stanju. Gbedpfxovi Hw No Ahmsn Že je demontirana in shranjena v Achernu. Vsa tehnična dokumentacija je na voljo. Za vprašanja o napravi in tehnične informacije smo vam vedno na voljo. Pri popravilu in ponovni montaži vam bomo svetovalno pomagali.

Stanje: pripravljen za uporabo (rabljen), Glue application unit with 2 rollers Adhesive application - Glue application for package height up to 300 mm 1 application roller and 1 dosing roller Gedpfx Ahjht Rtaemjbn - 1 pc left side - 1 pc right side - suitable for DIMTER HK200 + HK400 + HK800 + HK1000 Dimter spare parts Dimter accessories

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 89257, stiskalna sila: 60 t, vhodna napetost: 380 V, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, delovna višina: 2.000 mm, skupna dolžina: 9.500 mm, širina krmilne omare: 1.000 mm, skupna širina: 2.000 mm, leto zadnje generalne obnove: 2026, pritisk: 100 letvica, krmilna napetost: 12 V, višina obdelovanca (maks.): 120 mm, največja hitrost vrtenja: 6.000 obr/min, zračni tlak: 8 letvica, Ponujamo pripravljeno WEINIG Dimter HK200 linijo za spajanje s čepki, letnik 1996. Gbsdozatztjpfx Ahmjn Če imate vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter • Feed unit (cross processing) Gbedex S Sk Eopfx Ahmsn • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 Gsdpfx Ahjylmmmemjbn • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Prodajamo našo paketno linijo za prstno spajanje konec leta 2025/začetek leta 2026, od vakuumskega razstavljanja (slika 1) do stiskalnice za prstne spoje, vključno z odrezovalno žago (slika 11); zgolj žage za izrez napak ne prodajamo. Paketna prstna spajalna linija HK 250 L, letnik 1995 (glej sliko 7), kjer sta bila leta 2013 zamenjana krmiljenje in stiskalnica za prstne spoje. Lepljenje poteka po podmešalnem postopku z lepilnimi valji (slika 6). Krmiljenje za celotno linijo in stiskalnico je bilo obnovljeno s strani podjetja Somako. Do konca leta 2025 se bo s strojem še vedno proizvajalo, zato je možen ogled v tekoči proizvodnji. Cena je odvisna od tega, ali se kupi celoten stroj ali le posamezni deli. Možna je tudi prodaja posameznih komponent kot rezervnih delov. Gjdpfx Aow Uf Tkehmebn

Stanje: dober (rabljeno), Leto izdelave: 2005, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2005. Moč motorja: 7,5 kW Samodejna vstopna miza: 5,10 m (pretočni sistem) Samodejna izstopna miza 6 izmetalcev na levi izstopni mizi. Gbodextxg Hepfx Ahmsn Optimizacija z avtomatsko zaznavo napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumentacija vključena.