Sistem za optimizacijo prečnega rezanja z zaznavanjem linij

Crecon Dimter 2004

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Ksdpfei Ezx Dsx Al Njlr Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: novo, Leto izdelave: 2025,

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright Kjdef Tv T Nspfx Al Nelr With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dozirni in nanašalni sistem Hydrotop 1 E400R + Ecotac_C za enostransko nanos 1K PUR lepila z glavnikom za paketno spajanje z mozničastimi zobmi. Nanašanje lepila na mozničaste zobe v zelo dobrem stanju. Kljdpeul Shnjfx Al Nsr

Leto izdelave: 2003, stanje: rabljeno, Paul AB 920 feed table Klsdpfx Alsiauhzs Nsr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 000247, GLUESTREAM PU-300 1C GLUING MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE Pre-owned machine, in nearly new condition • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm, individually controlled by solenoid valves Kedpfjt Nfarox Al Njlr • Glue bead spacing: 10 mm • Tray with anti-stick liquid automatically closes combs when the machine is not dispensing • Adjustable glue output: 100 to 200 g/m² as required • Gear metering pump • Suitable glue viscosity range: 10,000 to 30,000 mPas • Feed speed: 7 to 15 m/min • 200 l drum holder • PLC control with touchscreen display, KINCO brand • Manufactured by GLUESTREAM (Slovakia), assembled in Ukraine • CE compliant • Year of manufacture: 2021, assembly in May 2022. Like new, less than 200 operating hours WE ALSO HAVE THE HYDRAULIC PRESS FOR GLULAM BEAM PRODUCTION

Stanje: potreben popravila (rabljeno), Leto izdelave: 2001, CNC nadzorovan stružnica za les obdela 3 elemente hkrati Brez kontrolnika Krmilna omara brez računalnika, upoštevajte privlačnost ponudbe brez krmiljenja, Možna izvedba krmilnega sistema za stranko za doplačilo Tehnične specifikacije: Maksimalna delovna dolžina: 1200 mm Maksimalen kvadrat: 100×100 mm 3 elementi se obdelujejo hkrati Kedpsf Ezgqofx Al Nelr Programiran vzorec Fagor krmiljenje Zasnovana za visoko produktivnost.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni motor 50 kW ploščati motor Samodejni rezkalnik za kliničaste spoje za avtomat za rezkanje kliničastih spojev dimter HK200 dimter HK250 dimter HK400 Različne dolžine vretena Kledpfx Alom Sgvzo Ner Na slikah je prikazan obnovljen rezkalni in lepilni stroj dimter HK400 podjetja jöma, kladivasto zelena barva 2K Podajalni pogon s servomotorjem Kabli in zračne napeljave so nameščeni zgoraj nad rezkalnim strojem

Stanje: novo, Leto izdelave: 2020, Cantilever racking, single-sided, 6.30 m height, 1.20 m arms, 900 kg per arm — New —: Price ex works, including loading! Kedjfivg Sopfx Al Nelr 1 rack unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! A galvanized cantilever racking system, consisting of: Single-sided uprights, approx. 6,300 mm high, hot-dip galvanized Base and arm depth: 1,200 mm, each with 3 height-adjustable arms Load capacity with load center at 600 mm: 900 kg per arm / 4,000 kg per upright With 4 uprights per arm level: 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE100 Incl. horizontal and diagonal bracing, bay width = 1,300 mm, standard is 1.30 m. Other standard bay widths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a surcharge applies to the stated price! Custom sizes (other bay widths) are also available on request, but incur a surcharge and have longer lead times as they require custom fabrication! If you do not specify a different bay width, we will supply the racking with a standard width of 1.30 m. In that case, the length of a racking row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), excluding floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: skoraj kot novo (rabljeno), Rokovalna oprema za linijo spajanja s prsti. Valjčni transporterji, širokopasovni in ozkopasovni trakasti transporterji, transporter za obrezovalno žago, obrezovalne žage itd. Glejte slike. Priložena dokumentacija. V dobrem stanju, proizvajalec Martek, Finska. Kedpfxed Duz Ej Al Nolr