Dimter Chopsaw nakup rabljenega (80)

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Fjdpow Sy T Hofx Aplegb Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 100 mm, pomik po osi Z: 142 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: WS 400-20, CNC machining centre from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It is equipped with a powerful crosscut saw with spindle speeds of up to 3,000 rpm and a tenoning spindle motor output of 15 kW. If you are looking for high-quality CNC machining capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Crosscut saw motor power: 3.7 kW • Crosscut saw spindle speed: 2,800–3,000 rpm • Max. tool diameter for crosscut saw: 400 mm • Crosscut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Max. tool diameter for tenoning spindle: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (cutting circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of top horizontal profiling unit: 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Max. tool diameter for horizontal profiling unit: 130 mm Fedpfxsy Ixpaj Aplsgb • Horizontal profiling unit speed: 5,850 rpm

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This WEINIG Unimat 500 was manufactured in 2005. The robust woodworking machine offers a working range of 230 x 120 mm and five spindles, ensuring efficient operation with variable feed speeds ranging from 4 to 30 m/min. The spindle power is 4 kW for the infeed and outfeed spindles, and 7.5 kW for the right/left and top spindles. Take advantage of this opportunity to purchase the WEINIG Unimat 500 woodworking machine. Contact us for further information about this machine. Fsdpfeyaihpjx Aplsgb • Grooved guide and hydraulic nuts • Working range (W x H): 230 x 120 mm • Number of spindles: 5 • Variable feed speed: 4 - 30 m/min • Spindle power: bottom (infeed): 4 kW / right / left: 7.5 kW each / top: 7.5 kW / bottom (outfeed): 4 kW Additional equipment • Includes approx. 70 Z4 cutterheads • Several hundred new blank knives with serrated backs It is possible to purchase the WEINIG Unimat 500 separately (without the Weinig Rondamat 931 profile knife grinding machine and additional tools) at a price of €37,000.

Stanje: dober (rabljeno), Leto izdelave: 1992, Fully automatic programmable cross-cutting with additional mark detection for defect removal via LUT system Infeed conveyor 6 m 6 discharge stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency inverter issue. Fedol H E Taepfx Apljgb

Stanje: skoraj kot novo (rabljeno), Spare parts + accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kupfermühle Rex Cook Bolinders Dimter GreCon Just inquire. Fsdjlifbdopfx Aplsgb

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, pogonska enota žage: 15.000 W, moč servomotorja: 11.000 W, Stroj popolnoma obnovljen / kot nov z novo električno napeljavo nova Siemens S7 krmilna enota Izvedba ob naročilu Kapovalni avtomat z zaznavo kredne črte Preseki lesa 430x30 / 300x150 / 200x200 Fodpsv Diy Asfx Aplogb DIMTER OptiCut 602 R Premer žaginega lista 650/700 mm Podajalna hitrost 120 m/min Motor žage 15 kW Servo pogon SEW 11,00 kW s pretvornikom Električno nastavljanje debeline

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, Stroj za spajanje z zobatim utorom dimter HK 400 petnajst tisoč sedemsto EUR 15.700,- EUR Stroj za spajanje z zobatim utorom za lesene pakete Fjdjvi Hw Nopfx Apljgb Vstopne dolžine lesa: 800 - 6000 mm Višina rezkanja 285 mm (opcijsko 300 mm) Modra barva Potreben popravila, trenutno stanje Stroj je že demontiran in shranjen v skladišču v Achernu Izjemno ugodna ponudba – veliko materiala za malo denarja Na voljo je vsa tehnična dokumentacija Nudimo tudi tehnično podporo in odgovorimo na vsa vaša vprašanja

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, montažni premer: 50 mm, vrsta vhodnega toka: trifazni, premer orodja: 50 mm, dolžina orodja: 330 mm, vhodna frekvenca: 50 Hz, Naprava za prednastavitev orodja WEINIG Opticontrol Fgjdoxwnvrjpfx Aplsb Premer krožnega gibanja: 0 - 300 mm Dolžina orodja: 0 - 330 mm Premer stebla: 50 mm

Stanje: pripravljen za uporabo (rabljen), Glue application unit with 2 rollers Adhesive application - Glue application for package height up to 300 mm 1 application roller and 1 dosing roller - 1 pc left side - 1 pc right side - suitable for DIMTER HK200 + HK400 + HK800 + HK1000 Fedpfx Asht Rtaspljgb Dimter spare parts Dimter accessories

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Optimizirni stroj Grecon Dimter OptiCut 304R Minimalna dolžina vhodnega lesa: 900 mm pri nalaganju na prečni verižni transporter Minimalna/maksimalna širina lesa: 40-200 mm Minimalna/maksimalna debelina lesa: 15-80 mm Spust, rezanje in pospeševanje: 0,5 – 1 sek Natančnost reza: najmanj 0,8 mm, največ 1,5 mm Maksimalni preseki lesa: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Premer žaginega lista: 400 x 30 mm Hitrost vrtenja žaginega lista: 4200 obr./min. Maksimalni pomik: 170 m/min Odbiralni tračni transporter s 6 potiskači Načini žaganja: 1. žaganje na fiksno dolžino 2. optimizacija dolžine desk za maksimalni izkoristek Fedpfjyxltyox Aplsgb 3. odstranjevanje napak v lesu z označevanjem napak s kredo Celotna dolžina linije: 21 m Leto izdelave: 2000

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / through-feed system Fgodot Ir Nqjpfx Aplsb Outfeed table 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Stanje: rabljeno, Dimter Profipress L 2500 Leto izdelave: 2006 Dimenzije: • Širina lamele (za plošče): 30-150 mm • Debelina: 11-60 mm Fedpfx Apsyhggrologb • Vhodna dolžina: 800-2500 mm • Širina plošče: spremenljiva, do maks. 1300 mm • Širina polnjenja na cikel: min. 650 mm / maks. 1300 mm • Integrirana hidravlična enota za moč stiskanja in hidravlične motorje • Elektrika: • Obratovalna napetost: cca 400 V / 50 Hz • Električna priključna moč za 40 kW HF generator: 56 kW

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Valjčni transporter Dolžina 7500 mm Fsdpfoyxmb Esx Aplsgb Širina 600 mm Višina 1700 mm

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter • Feed unit (cross processing) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW Fgsdpfox S Sk Ejx Aplob • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity Fgsdpfx Apjylmmmeleb • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. This robust used gluing press features a pressing table measuring approximately 2500 x 1300 mm and a sturdy base frame. It is equipped with a motor-driven multifunction pusher and an automatic gluing station with a precision glue head. Suitable for both softwood and hardwood applications, it ensures uniform pressure distribution and high vertical pressure for minimal displacement. Contact us for further information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30-150 mm • Thicknesses: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Max. fill area per cycle: 3.25 m² • Note: The max. usable press width depends on the individual lamella widths • For multiple-row operation, the filling widths can vary by up to 15 mm. • Minimum contact surface per pressing cycle: ≥ 100 cm² • Pressing performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press table and construction: • Press table area: approx. 2500 x 1300 mm • Sturdy base frame with lower press table made of stainless steel (ground electrode) • Upper pressure plate with hydraulic "anti-rebound" motor for high vertical pressure and minimal displacement • Special hydraulic pressure elements provide uniform joint pressure and compensate for tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically moveable to current fill width • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connected load of the press (without options): 7 kW • Electrical connected load for 40 kW HF generator: 56 kW • Control and safety: Fedpox D I Nrjfx Aplogb • Control cabinet and operator panel • Protective cover Additional Equipment • Extended collecting table to 3700 x 1300 mm (with stainless steel-topped wooden support) • Motor-driven multifunction pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and cleaning system for glue head • Modem with software for online connection

Stanje: dober (rabljeno), Leto izdelave: 2005, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2005. Moč motorja: 7,5 kW Samodejna vstopna miza: 5,10 m (pretočni sistem) Samodejna izstopna miza 6 izmetalcev na levi izstopni mizi. Optimizacija z avtomatsko zaznavo napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumentacija vključena. Fedpfx Asxtxg Hoplogb

Stanje: novo, Leto izdelave: 2023, Nanašalni glavnik, oblika zob 10 mm Nanašalni glavnik, oblika zob 15 mm Nanašalni glavnik, oblika zob 20 mm Profil klinastih zobcev Nanašalni glavnik za lepilo Nanašalni glavnik za lepilni nanos Lepilni glavnik Lepilni glavniki Fjdpfx Apjiacbpslegb >>Dobavni rok iz zaloge

Stanje: rabljeno, Leto izdelave: 2001, Električna omara Dimter OptiCut 602R Na voljo električne sheme Fsdoxp Uxwspfx Aplsgb Na voljo seznam delov

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Prodajamo našo paketno linijo za prstno spajanje konec leta 2025/začetek leta 2026, od vakuumskega razstavljanja (slika 1) do stiskalnice za prstne spoje, vključno z odrezovalno žago (slika 11); zgolj žage za izrez napak ne prodajamo. Paketna prstna spajalna linija HK 250 L, letnik 1995 (glej sliko 7), kjer sta bila leta 2013 zamenjana krmiljenje in stiskalnica za prstne spoje. Lepljenje poteka po podmešalnem postopku z lepilnimi valji (slika 6). Krmiljenje za celotno linijo in stiskalnico je bilo obnovljeno s strani podjetja Somako. Do konca leta 2025 se bo s strojem še vedno proizvajalo, zato je možen ogled v tekoči proizvodnji. Cena je odvisna od tega, ali se kupi celoten stroj ali le posamezni deli. Možna je tudi prodaja posameznih komponent kot rezervnih delov. Fjdpew Uf Tksfx Aplogb

Stanje: rabljeno, Leto izdelave: 2004, Maksimalna širina reza: 700 mm Maksimalna višina reza: 120 mm Maksimalni premer žaginega lista: 700 mm Avtomatska optimizacijska kapna žaga (potisna žaga) Dimter tip OptiCut 700 za kapanje zelo širokega lesa po napakah (fluorescenčna kreda) in dolžinah. Fodpfx Ajx Eblvoplegb Vhodna dolžina: maks. 5.500 mm

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version Fodpfsu Atmujx Aplogb With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: generalkompletno obnovljen (rabljeno), stiskalna sila: 10 t, delovna višina: 805 mm, skupna dolžina: 1.700 mm, leto zadnje generalne obnove: 2026, Stiskalnica za klinske zobe Fgodpot Sc Swefx Apleb Stiskalnica za klinske spoje Taktna stiskalnica za klinske spoje Tlačna sila: 10 t Hidravlična finger joint stiskalnica v ciklu Širina lesa: 80 - 300 mm Debelina lesa: 18 - 100 mm MOŽNOSTI z hidravličnim agregatom 300 l in motorjem 5,5 kW, proizvajalec GOD z električno napeljavo

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Transportni trak Trak za prevoz Pasovni trak Transportni trak D 7600 x Š 350 x V 900 mm Fgedpfxsvn Sk Se Apljb Širina pasu 240 mm Trofazni trajni magnetni motor Rexroth očiščen, popravljen in funkcionalno preizkušen

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5 h, Hidravlični cilindri v različnih velikostih na zalogi dodatni na zahtevo ali tudi v trgovini jöma Ti črno lakirani so bili v uporabi največ 1–5 ur Fgsder Hnfcepfx Aplsb na prototipnem patentnem stiskalnici