Deckel Fp2 nakup rabljenega (904)

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 46436, Pomiki: Vzdolž: 400 mm Vertikalno: 400 mm Horizontalno: 200 mm Oprema: - Pomikljiva navpična rezkalna glava - Zasukalna kotna miza 260 x 600 mm Hnjdpjygia Esfx Agijk - Različni nosilci za orodje - Montažni elementi - Rotacijska miza Ø 280 mm - Dokumentacija Stanje: preverjeno v delavnici

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9585, DECKEL Univerzalni rezkalni in vrtalni stroj Tip: FP 2 Št. stroja: 9585 Hodpfxjygicaj Agienk Leto izdelave: 1978/79 Stanje: dobro, pripravljen za uporabo Pomiki: -po dolžini: 400 mm -vertikalno: 400 mm -horizontalno: 200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a state training workshop. Features: fixed table, SK 40 spindle taper. Included accessories: various collets and arbor mandrels, counterstay. The machine is in very good, ready-to-use condition, and can be demonstrated under power by prior arrangement. Hodsv U Rh Nepfx Agionk

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP2 FPS posodobljena orodjarska rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju, prihaja iz izobraževalnega oddelka. Fiksna miza, dolg pomični rezkalni agregat, SK 40 vpenjalni vretenasti nastavki. Dodatki: različne vpenjalne puše in držala rezk. Dobra, delujoča kondicija. Po dogovoru je možen prikaz v obratovanju. Hnedpfx Aeyhbn Rsgiek

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3, orodna rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju. Fiksna miza, vpenjalni stožec SK 40. Oprema: različne napenjalne puše in nosilci rezkalnikov, nasprotni nosilec. V dobrem, takoj pripravenem obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Hedpfx Asxbx R Uegijnk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Hsdpfx Agexyhmvoijnk

Stanje: dober (rabljeno), Leto izdelave: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Long travel milling head. Accessories include various collets and cutter arbors, counterholder. In good, fully functional condition. Can be demonstrated under power by arrangement. Hnsdpfx Aeumclasgisk

Stanje: rabljeno, X-hod 400 mm Y-hod 200 mm Hsdjyyqpvopfx Agionk Z-hod 400 mm Število obratov 40 - 2.000 vrt/min Vpenjalni stožec SK 40 Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po predhodnem dogovoru ogledati pod napetostjo. Pribor, prikazana orodja in vpenjala so priložena samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: kot nova (razstavni stroj), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2801 002016, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 6.300 obr/min, hitrost vretena (min.): 31 obr/min, poteza s peresom: 80 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, širina mize: 620 mm, dolžina mize: 390 mm, obremenitev mize: 250 kg, skupna masa: 1.700 kg, potrebna širina: 1.800 mm, zahteva za prostor dolžina: 1.400 mm, potrebna višina: 1.800 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, The machine is very sturdy and robust in terms of its design and construction. Its excellent accessibility makes it extremely user-friendly. The machine can also be moved using mechanical handwheels. CNC Path Control DECKEL Dialog 4 Easily programmable 3D path control with colored graphical support, dialog-based cycle input, contour path calculator, editor functions, clear program and tool management, parallel programming possible. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Working spindle: vertical and horizontal. Manually extendable quill: 80 mm vertical and 65 mm horizontal, both manually extendable. Milling head: manually swiveling +/- 90° Speed range: 31.5-6300 rpm, geometric stepped direct gearbox for maximum torque / milling performance at the working spindle. Direct gearbox for maximum torque / milling performance at the working spindle Hsdoywhvhepfx Agionk Feed rate: 2 - 3600 mm/min, infinitely variable feed rate Rapid traverse: 4000 mm/min Universal table: 620 x 390 mm, max. load capacity 450 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2836-0192, Stroj v dobrem rabljenem stanju, Krmiljenje Dialog 11 Do pred kratkim je bil redko v uporabi v lastni delavnici. Hodpfx Aeylawxjgijnk Dokumentacija/priročniki itd. so na voljo. Dodatna oprema, rezkarji, ničelne sonde itd. se lahko dokupi opcijsko.

Leto izdelave: 1968, stanje: dober (rabljeno), For sale is a Deckel milling machine from the year 1968. The machine is in good to very good condition and fully functional. (No digital readout, but can be added upon request) Technical data: - Tool holder: SK 40 - Travel X/Y/Z: 400 / 200 / 400 mm - Speed range: 40 - 2000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 100 mm - Feeds: 8 - 400 mm/rev - Table size: 700 x 330 mm - Motor power: 2.2 kW Hedjihf Etspfx Agionk - Connection: 400 V / 16 A plug - Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 400 mm, For sale is a conventional milling machine by Deckel, model FP2. The machine is in excellent condition, was overhauled by Harich (date unknown), and is ready for immediate use. Technical specifications: Toolholder: SK 40 Travels X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1,300 kg Vise and tools are NOT included in the offer but can be supplied upon request. Transport and loading can be organized across Europe for an additional charge, if required. Prices plus VAT. Inspection possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Hnodpfx Agou Ti Akeiok Machine purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), For sale is a Deckel FP2 with rapid traverse milling head (V-belt drive with gear ratio). The machine was only used for copper and graphite machining, and therefore has not been heavily used. The machine is ready for immediate operation and fully functional. Retrofitting with a digital readout is possible for an additional charge. The machine can also be sold without the milling head. Dividing head NOT included. Accessories available at extra cost. Tool holder: SK 40 Travel (X/Y/Z): 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine Trade – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Hnjdolz R Iwopfx Agiek For further information or to contact us, please visit our website.

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 680 mm, širina mize: 380 mm, višina mize: 345 mm,

Stanje: dober (rabljeno), Leto izdelave: 1964, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 200 obr/min, hitrost vretena (min.): 40 obr/min, vhodna frekvenca: 50 Hz, The machine is in good condition! Tool holder: SK 40 Travel X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirements LxWxH, approx.: 1200 x 1250 x 1670 mm Head swiveling: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine to you under power at our premises. Hnodpfxoilg H Eo Agiok All information is provided without guarantee. Subject to prior sale. The item is sold excluding any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, limb, or health.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: Hnodpfovbifgjx Agiek For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Leto izdelave: 1990, stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request. Hsdohvz Iiopfx Agisnk

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo Hnodpfx Agswid Spjiok - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 in Special Light Grey Paint with New 3-Axis K+C Digital Display Technical Data: • Mach. No. 5983, Year of manufacture approx. 1975 • Rigid angle table (newly refurbished) • Speed range: 40 - 2000 rpm • Feed and rapid traverse on 3 axes • Drive power: 2.2 kW Hnjdpou I Rm Nefx Agisk • Travel X/Y/Z: 400/200/400 mm • Equipment: Vertical & horizontal spindle • Extendable vertical and horizontal quill - SK-40 taper • Drawbar system: S20x2 • Weight approx. 1,100 kg Accessories and Features: • 3-axis K+C digital readout, newly installed with manufacturer's warranty Display features: set reference points, set zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. • User manual for digital readout • Coolant system About the machine: For sale is a Deckel FP2 universal milling machine in good condition. The Deckel has very little backlash and all spindles move smoothly. The machine has been completely dismantled and newly painted. An oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes work easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable Hsdpfexghtvsx Agijnk >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, Dear Sir or Madam, We are offering for sale a Deckel FP2. This newer model stands out especially for its infinitely variable spindle speed control, while still featuring a very straightforward design. Operation is extremely simple as well. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to verify on site. --- Currently, we have 3 units available --- Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool mounting: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed control on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced prior to sale Hedpfxjx Hr Dze Agionk - On request, we can fully or partially overhaul your selected machine - On request, you can order additional accessories such as tools, etc. directly - On request, we can fit additional equipment such as safety features directly - We are also happy to take care of shipping and/or installation

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Hjdpjxcbl Djfx Agijnk Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Stanje: rabljeno, x-travel 800 mm y-travel 400 mm z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Hnjdpfxoqpl Uus Agiok Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Collet chuck The machine was overhauled for approx. €24,000.00

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, -KOM 3149- Hsdpfx Agowxxd Seionk Offered here is a slotting head for an FP2 Deckel milling machine. The slotting head is rotatable 360 degrees on the flange plate. All guiding surfaces are in very good condition. The dimensions of the slotting head can be found in the last image.

Stanje: dober (rabljeno), Universal Milling Machine Hnedpfx Agswy Dl Dsiek Stock no.: 3008 Manufacturer: Deckel Machine no.: 46445 Type / Model: FP 2 Travel (x-y-z): 400 - 200 - 400 mm Table size: 700 x 285 mm Speed range: 40 to 2,000 rpm Spindle taper: SK 40 Feeds: 8 to 400 mm/min Power connection: 2.2 kW Accessories/Equipment: Elesta digital readout Condition: good Weight: 1.2 t Dimensions: 1,000 x 1,200 x 1,800 mm