Briketna Stiskalnica Briketna Stiskalnica Za Aluminij nakup rabljenega (90.141)

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months Ledpfschqxxjx Aamohi --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 7037, z izbirnim robotom ABB IRB6400F, letnik: 1997, serijska št.: 1318, inventarna št.: 073005700, razpršilna naprava WOLLIN, avtomatizacija litja, krmilnik, upravljalna plošča na dotik, hladilni bazen, strojni podest, tračni transporter, 1 industrijski robot ABB kot donor rezervnih delov Lhedjzhax Topfx Aamei

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Lhsdpfxsd N Dnhs Aamji Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Pnevmatska stiskalnica za izdelavo aluminija, raznih utorov, štancanje, vrtanje s pomočjo po višini nastavljivega bata in upravljanja s stopalko. Največja delovna sila 3000 kg pri 8 atm. Pnevmatski tlak 6-8 atm Uporabna višina svetlobe 260 mm Delovni hod 0-35 mm Dimenzije embalaže 500 x 320 mm Hitrost bata 23 mm/s Približna poraba zraka na cikel 25 litrov Dimenzije mize 530 x 340 mm Prosta višina 260 mm Nastavljiv hod od 0 do 35 mm Lhjdpfxjpa Nw Ss Aamsi MOŽNOSTI: Vrtljiva omara / podnožje EMBALAŽA IN DIMENZIJE: 600 x 490 x 600 (86 kg) Standardna embalaža iz lesene kletke Veselimo se vašega sporočila! Plantec Maschinen GmbH

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Pressing force: 6-8 bar Air consumption: 8 l/stroke Stroke height: 12 mm / 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Schüco pneumatic press for Schüco punching tools Schüco part no.: 290 124 Operating manual included Various crimping (or punching) tools included! Tool nos.: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and fast clamping of tooling The data for this listing was generated using ModulMWS — software by LogoTech oHG. Manufacturer: SCHÜCO Model: Pneumatikpresse Machine type: — Operating pressure: 6–8 bar Air consumption: 8 l/stroke Stroke: 12 mm / 134 mm Lodjyzkifepfx Aamshi Number of strokes: 400 strokes/min Max. punching force: 3500 kp Approx. machine weight: 80 kg Schüco pneumatic press for Schüco punching tools Schüco part number: 290 124 Operating instruction included A set of various crimping/punching tools included! Tool no.: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-action levers for safe and quick clamping of crimping/punching tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Lhsdpfx Aexfg Sbeamoi Obnovljena 12 m dolžine Vse brezhibno V delujočem stanju. Nahaja se na sedežu podjetja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: A7879, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 3.000 kg, širina odpiranja: 400 mm, TEHNIČNE PODROBNOSTI Skupna tlačna sila: 70 ton Specifična tlačna sila: 2,5 – 3,5 kg/cm² Odprtina: 400 mm PODROBNOSTI O STROJU Nadzor: nadzor s pritiskom gumbov za odpiranje, zapiranje in ustavljanje Pogon: elektrohidravlični Grelni elementi: aluminij Mere grelnih elementov: 2.550 x 1.100 mm Ogrevanje: električno Hidravlični valji: 4 Premer hidravličnih valjev: 80 mm Nazivna napetost: 380 V Vrsta toka: 3~ Frekvenca: 50 Hz Nadzorna napetost: 220 V Nazivni tok: 21 A Moč: 13,6 kW Mere in teža Transportne mere: 2.900 x 1.400 x 2.000 mm Teža: 3.000 kg OPREMA Varnostna vrvica Lsdpfxjzktpqe Aamshi Nadzor tlaka (samodejna nastavitev) Nastavljivo končno stikalo za specifično odprtino

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 10 h, vrsta aktuacije: električni, število valjev: 3, premer spodnjega valja: 130 mm, premer zgornjega valja: 130 mm, premer valja: 130 mm, dolžina valja: 2.050 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, skupna masa: 1.500 kg, skupna dolžina: 3.200 mm, skupna širina: 750 mm, skupna višina: 1.000 mm, moč: 2,2 kW (2,99 KM), Oprema: naprava za krivljenje stožcev, nožno daljinsko upravljanje, zavrtljivi zgornji valj, Naprodaj je visokokakovosten 3-valjni obsegovalni stroj za pločevino Sahinler IRM 2050 x 130 z električnim pogonom. Stroj je bil kupljen izključno za en projekt in ima približno 10 obratovalnih ur. Tehnično in vizualno je v skoraj novi kondiciji. Lhodpfx Aaozdnfmemji Posebej praktično: Stroj je opremljen s težko nosilnimi kolesi, kar omogoča fleksibilno premikanje znotraj delavnice. Tehnični podatki: Proizvajalec: Sahinler Tip: IRM 2050 x 130 Leto izdelave: 2022 Obratovalne ure: cca 10 h Uporabna dolžina pločevine: 2.050 mm Maksimalna debelina pločevine: 3 mm Premer valja: 130 mm Moč pogona: 2,2 kW Teža: cca 1.500 kg Dimenzije (D x Š x V): 3.200 x 750 x 1.000 mm Oprema: - 3-valjna izvedba - Asimetrična razporeditev valjev s pred-upogibno funkcijo - 2 pogonska valja preko zavornega motorja - Spredaj izklopljiv zgornji valj - Tek naprej in nazaj - Kroženje v stožcu z nastavitvijo zadnjega valja pod kotom - Premična upravljalna konzola - Mobilnost zaradi naknadno vgrajenih težko nosilnih koles Stroj je pripravljen za takojšnjo uporabo in ga je možno po dogovoru tudi ogledati. V primeru interesa ali vprašanj vas vabim, da me kontaktirate.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, stiskalna sila: 40 t, Proizvajalec: HSM Lhsdpfx Asx D U N Soamji Tip: HL 4010 Leto izdelave: 2012

Stanje: rabljeno, Proizvajalec: EDA Ljdpfsyq Nrcex Aamjhi Skupne dimenzije: 6600x1400x(1700 mm višina) Oprema ni v obratovanju, ne deluje zaradi hidravlične težave!!

Stanje: rabljeno, Leto izdelave: 2013, stiskalna sila: 40 t, Proizvajalec: HSM Lsdsyq Ngtepfx Aamohi Tip: HL 4010 Re Leto izdelave: 2015 Tlačna sila: 40 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Proizvajalec: HSM Tip: HL 4010 Li Leto proizvodnje: 2015 Ledeyhbxcspfx Aamohi Tlačna sila: 40 t

Stanje: rabljeno, Leto izdelave: 2015, Proizvajalec: HSM Tip: HL 4010 Re Lodpfsyibv Iex Aamohi Leto izdelave: 2015 Tlačna sila: 40 t

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, premer briketa: 100 mm, 3× Pralni stroj za brikete Di Più MB100 – leto proizvodnje 2009 – celoten sistem s pilami in dodatno opremo 2× Pralni stroj za brikete Pawert SPM I-90/200 Za prodajo so na voljo 3 pralni stroji za brikete tipa Di Più MB100, leto proizvodnje 2009, vključno s pilami, transportnimi sistemi in dodatno opremo. Stroji so bili uporabljeni v industrijski proizvodnji in so idealni za proizvodnjo lesenih briketov iz žagovine, lesnih sekancev in ostankov lesa. ⸻ Tehnični podatki (na stroj): Tip: Di Più BRIK MB100 Leto proizvodnje: 2009 Premer briketov: pribl. 90 – 110 mm Proizvodna zmogljivost: pribl. 1.300 – 2.300 kg/h Pritisni tlak: pribl. 2.000 – 2.500 kg/cm² Glavni motor: 75 kW Skupna moč: pribl. 98 kW Vlažnost materiala: optimalno 8 – 12 % Velikost zrn: pribl. 1 – 12 mm Teža: pribl. 7.800 kg na stroj Pogon: hidravlična batna stiskalnica ⸻ Oprema: Posoda za material Transportni vijak Hidravlični sistem Lhsdpfjznuvysx Aamsi Električne omarice Pile za rezanje briketov na dolžino Zaščitne obloge in varnostni sistemi Enote za izpust materiala ⸻ Obseg dobave: 3 kompletni pralni stroji za brikete Di Più MB100 Pile Transportni sistemi in dodatna oprema Rezervni deli po dogovoru ⸻ Področja uporabe: Žage Obdelava lesa Obrati za biomaso Proizvodnja briketov za energijo in prodajo Lokacija: na zahtevo Transport: organizacija po dogovoru je možna Cena: na zahtevo Možna je individualna prodaja ali prodaja celotnega paketa.

Stanje: novo, Leto izdelave: 2023, Stanje: novo Leto izdelave: 2023 Številka zaloge: 9656 Dobavni rok: takoj, vmesna prodaja pridržana Država izvora: Turčija Cena: 2.600 € Bestseller: 1 Na zalogi: 1 Dolžina upogibanja: 1.050 mm Maks. zmogljivost upogiba – konstrukcijsko jeklo: 1 mm Premer zgornjega valja: 56 mm Dolžina: 1.400 mm Širina: 700 mm Višina: 1.120 mm Teža: 185 kg 3 valji Asimetrična razporeditev valjev – s pred-upogibom Žlebovi za vstavljanje žice pri spodnjem in zadnjem valju Nastavitev spodnjega valja preko centralne ročice – z zobniškim prenosom Podnožje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Lsdpfx Aaswira Uemehi

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €4,900 Leasing rate: €109.71 Bending length: 1050 mm Max. bending capacity – mild steel: 3 mm Max. sheet thickness with pre-bending – mild steel: 2 mm Top roll diameter: 90 mm Length: 2080 mm Width: 700 mm Height: 1250 mm Weight: 410 kg 3 rolls Asymmetrical roll arrangement Lhjdpewirv Njfx Aamei 2 driven rolls operated via hand crank Rear roll adjustment via hand wheel Wire grooves on lower and rear rolls Swiveling top roll Cone bending device Operating manual in GERMAN

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. Lhjdpfx Aaswd N Rmjmei • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Lhodpfxofh Tmmo Aamoi Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: zelo dobro (rabljeno), Laminating Press MAWEG Machine frame inclined at 10° Single-side loading Horizontal beam height adjustable via hand crank (all clamping cylinders can be adjusted simultaneously) Hydraulic cylinders with quick clamping, stepless adjustment Manual hydraulic cylinder clamping Hydraulic cylinder pressing force approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Max. clamping length 2800 mm Max. clamping height 1800 mm 4 pcs. vertical press cylinders 2 pcs. horizontal press cylinders 6 pcs. counter stops Note for used machinery: Lhjdpfx Aajyyn E Uemei • Subject to errors in technical details and prior sale. • Quoted prices are ex works, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Lodpjxgpaqofx Aamshi Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: rabljeno, Leto izdelave: 1997, No. 3214 Throughfeed Veneer Press Sergiani LAS Plus Used, year of manufacture 1997, already dismantled and stored Automatic press with continuous operation for the production of flush doors, high-quality doors (veneered doors, HPL, CPL) and pre-finished parquet (2 - 3 layers). The press enables consecutive loading of workpieces while the pressure in the other chambers is kept constant. The line requires up to 2 operators. The multi-daylight press enables very high production output. Pressing time is approx. 3 minutes (180 seconds) distributed across 10 press levels, meaning the press opens every 18 seconds, processing a new panel. The press is already dismantled and stored. The system was in operation until dismantling. The previous owner used the machine for producing 3-layer parquet. The bottom layer was inserted manually. The middle layer consists of one piece, was glued on top and bottom, and automatically loaded into the line. The top layer was also automatically loaded. Glue application machine/glue not included in the scope of supply (available as an option). Number of press levels: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tonnes Panel size: approx. 2500 x 1300 mm (L x W) Heating: hot water Application: manufacturing of doors, laminated pressings, veneer and engineered wood processing High productivity with a capacity of up to 1200 doors per shift (manufacturer’s specification) Vacuum loading system with dual-track infeed roller conveyor, without gluing Scissor lift table with conveyor belt (belt approx. 2900 x 1000 mm L x W) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table: approx. 6500 x 2365 mm (L x W) Space requirement for complete production line: approx. 25000 x 5710 mm (L x W) Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without transport and assembly Loading and transport by us possible on request Subject to errors in description and price To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical data, description of condition, year of manufacture, and scope of supply according to manufacturer's brochure or previous owner, without guarantee Lhedpfxev Sthge Aamei Subject to prior sale For used machines, all warranty is excluded, as is: “sold as seen” Photos and videos are sample images and do not represent the actual scope of supply Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, Tip stroja: hidravlična 4-valjna strojnica za upogibanje pločevin Proizvajalec: MG Model / zmogljivost: MG 2005 × 30 Letnik proizvodnje: 1998 Število valjev: 4 Delovna dolžina valjev: 2005 mm Maksimalna debelina pločevine: 30 mm Predhodni upogib: da, zahvaljujoč 4-valjni izvedbi Pogon: hidravlični Upravljanje: ločena upravljalna enota Uporaba: upogibanje pločevin, izdelava ohišij, cevi, stožcev in varjenih konstrukcij Stanje: odlično Možnost ogleda: po dogovoru Valji: 4 kos + 1 kos rezervni 2 kosa delovnih valjev, 300 mm 2 kosa pomožnih valjev, 200 mm Skupna dolžina: 4500 mm Lhedpfx Asznyiloamsi

Stanje: rabljeno, Stisne mere: ca. 2500 x 1200 x 600 mm, polhidravlično, elektromotorno nastavljanje stisne stene Lhjdpfx Aajzd Hm Njmji Lokacija skladiščenja: Nattheim

Stanje: dober (rabljeno), Koda: 0448 Znamka: KOLMAG – ITALIJA Model: PGP 80 Hidravlična hladna preša za plošče, pohištvo, vrata, lesene konstrukcije, kompozitne materiale in druge materiale: Tehnični podatki: Dimenzije plošče 2500 x 1100 mm Število batov: 4 Lodpfx Aajzmifgjmjhi Odprtina: 310 mm Potisna sila: 60 ton Motor: 4 KM Celotne dimenzije: 3100 x 1150 x 1780 mm (višina) Teža: 2200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, številka stroja/vozila: Indiviualbau IproTec Zwiesel, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.080 h, širina mize: 1.360 mm, dolžina mize: 1.500 mm, višina mize: 1.050 mm, leto zadnje generalne obnove: 2025, Oprema: CE označba, dokumentacija / priročnik, Stroj je bil zasnovan za avtomatsko lepljenje in stiskanje ogrodij iz masivnega lesa in vezane plošče različnih velikosti. Namesto treh zaposlenih, ki so delali ročno, je bil razvit delno avtomatiziran delovni prostor za enega delavca. S tem se je učinkovitost pri stiskanju/lepljenju povečala za več kot 300 %. Predvsem pri velikih količinah lahko avtomatsko stiskanje z dotavanjem lepila iz dveh 10-litrskih posod CH-Lamello zmanjša fizično naporno ročno delo. S pomočjo različnih pripomočkov za povezovanje je mogoče stiskati ogrodja velikosti od 300 x 300 mm do 140 x 140 mm. Lhedpfjzm Riajx Aamsi Stroj je bil individualno konfiguriran in kupljen za 92.300 € plus DDV (račun je priložen).