Biesse Rover B Edge 1950 nakup rabljenega (42.976)

Stanje: rabljeno, številka stroja/vozila: 008370, Delovno območje os X: 5055 mm Delovno območje os Y: 1930 mm Delovna površina: z vakuumskimi konzolnimi podstavki Nlsdpex A Tk Sjfx Agxea Moč glavnega vretena: 19 kW Število upravljanih osi: 5 osi Največja višina roba: 60 mm Število vrtalnih vreten: 28 Število mest za orodja: 31

Stanje: rabljeno, številka stroja/vozila: 008389, Delovno območje os X: 8417 mm Delovno območje os Y: 1930 mm Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 13,2 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 60 mm Število vrtalnih vreten: 40 Število orodnih mest: 22 Nedjyqxxrepfx Agxela

Stanje: zelo dobro (rabljeno), Delovni center z enoto za lepljenje robov v zelo dobrem stanju. Nlodpfx Asylcgpogxsa Tehnični podatki bodo kmalu posodobljeni.

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1000025340, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.735 mm, pomik osi Y: 1.650 mm, pomik po osi Z: 245.290 mm, višina obdelovanca (maks.): 60 mm, proizvajalec krmilnikov: Biesse BH 660, bSolid, bEdge, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 85 m/min, hitri pomik os Y: 85 m/min, Trumpa aprašymas • Darbinės eigos pagal X ašį: 6735 mm • Darbinės eigos pagal Y ašį: 1650 mm • Darbo stalas: Pod and Rail • Pagrindinio elektros veleno galia: 13,2 kW • Valdomų ašių skaičius: 4 ašys • Maksimalus briaunos aukštis: 60 mm • Gręžimo spindelių bendras skaičius: 20 • Įrankių keitimo vietų skaičius: 16 Išsamus aprašymas • Subkategorija: CNC apdirbimo centrai frezavimui, gręžimui ir briaunavimui • Darbų tipas: briaunavimas, gręžimas, frezavimas • Maksimalus plokštės pravažiavimo aukštis: 60 mm • Darbo laukų skaičius: 2 • Darbo stalas: Pod and Rail • Bėgių skaičius: 10 • Padėties indikatoriai padėklams • Vakuuminės taurelės ruošiniui fiksuoti Nlodpfx Agsycvcxsxja • Vakuuminių taurelių skaičius: 40 • Spaustuvai ruošiniui fiksuoti • Vakuuminis siurblys • Siurblių skaičius: 1 • Vieno siurblio našumas: 250 m3/h • Gręžimo mazgai: 1 • Pozicija: viršuje • Vertikalaus gręžimo spindelių skaičius: 20 • Horizontalaus gręžimo spindeliai X kryptimi: 4 • Horizontalaus gręžimo spindeliai Y kryptimi: 4 • Frezavimo velenai: 1 • Pozicija: viršuje • Valdomų ašių skaičius: 4 • Automatinis įrankių keitimas • Variklio galia: 13,2 kW • Briaunavimo mazgai: 1 • Klijavimo mazgas • Padėtis: sumontuotas ant pagrindinio mašinos rėmo • Klijų talpa skirtai karštam lydalio klijui • Briaunos ritinio žurnalas • Padėčių skaičius: 4 • Pjovimo/frezavimo mazgai: 2 (viršutiniai) • Pjovimo/frezavimo mazgas: fiksuotas pjovimui/frezavimui X, Y kryptimis • Įrankių žurnalas: 1 • Vieta: 16 • Įrankiai montuojami ant apdirbimo galvos • Dvigubos funkcijos galva – briaunos grandymas ir klijų likučių pašalinimas • Oro srovelės įrenginys briaunų valymui • Valdymo sistema: PC Control • Programinė įranga: Bsolid • Apsauginė konstrukcija su saugos jutikliais • Atliekų drožlių transporterio juosta

Stanje: rabljeno, številka stroja/vozila: 008013, Delovno območje os X: 5780 mm Nsdpfxowuz Eko Agxsla Delovno območje os Y: 1650 mm Delovna površina: Z vakuumskimi konzolnimi podstavki Moč glavnega vretena: 13,2 kW Število krmiljenih osi: 4 osi Največja višina roba: 60 mm Število vrtalnih vreten: 16 Število orodnih mest: 16

Stanje: rabljeno, CNC machining center for drilling and milling of wood panels, wood-based materials, plastics, and non-ferrous alloys. Working area X - Y: 3685 - 1508 – 150 mm Continuous worktable Lateral and front reference stops Pendulum (alternating) machining 2 independent working zones enabling simultaneous processing of 2 identical, mirrored, or different workpieces Five-sided workpiece machining "C-frame" design machine 4-axis HSD routing unit, HSK F 63 spindle connection Max spindle speed: 24,000 rpm Inverter 10-position tool magazine mounted on head – max tool diameter 215 mm – max tool weight 4 kg Biesseworks software Easy programming File import capability Remote control panel/console Teleservice and video diagnosis for real-time support Automatic guideway lubrication Vacuum pump: 1 x 250 m³/h Central extraction duct diameter: 250 mm Safety devices Side guards for unit protection Safety light barriers instead of mats Perimeter guarding with access door Compressed air consumption: 400 NI/min Operating pressure: 7–7.5 bar Nljdpeywxc Ssfx Agxsa Air consumption for extraction: 5300 m³/h Machine weight: 4,600 kg Machine documentation: operating and maintenance manual, software manual, spare parts catalog, electrical diagram, and EC declaration of conformity.

Stanje: rabljeno, številka stroja/vozila: 008470, Delovno območje os X: 4300 mm Delovno območje os Y: 2205 mm Nodsyzyrvjpfx Agxsla Delovna površina: nesting miza Moč glavnega vretena: 13 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 46 Število mest za orodja: 22

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.300 mm, število vreten: 21, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of traverses with vacuum suction: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. speed: 24,000 rpm Motor power: 9 kW Tool changer Number of positions: 10 MACHINE DETAILS Total power requirement: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Nledeytr Ryepfx Agxja Note: Cones and cutters are not included. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and is solely responsible for installation, securing, and operation of the machine at the destination. External reference: 8174

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, X working area: 6,400 mm Y working area: 1,500 mm Z working area: 1,500 mm Number of milling spindles: 1 Main motor power: 13 kW Max. spindle speed: 24,000 rpm Nljdpfx Aewlcqvjgxoa Tool clamping system: HSK-F63 Tool changer positions: 8 Vertical drilling heads: 20 Horizontal drilling units X-axis: 4 Horizontal drilling units Y-axis: 4 No. 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004×5,334 mm Weight: 4,900 kg

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 6.200 mm, pomik osi Y: 1.935 mm, višina obdelovanca (maks.): 250 mm, število osi: 4, število vreten: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness for edge banding unit: 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles (X direction): 4 Number of horizontal drilling spindles (Y direction): 8 Total number of drilling spindles: 40 Nlsdpsyqzrnefx Agxja Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8011

Stanje: rabljeno, številka stroja/vozila: 007813, Delovno območje os X: 3390 mm Delovno območje os Y: 1552 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 34 Število mest za orodja: 12 Nlodpfx Agjx A Thdexea

Stanje: rabljeno, Leto izdelave: 2005, 2005 BIESSE ROVER B 4.40 FT CNC obdelovalni center s 3 osmi Njdpfx Agewmdynjxola Tehnične značilnosti na zadnji fotografiji Delovne ure stroja: 45.343 Ure v avtomatskem načinu (delo): 27.267

Stanje: novo, Leto izdelave: 2022, Travel ranges (X,Y,Z) 6735 x 1930 x 245 mm Number of spindles vertical drilling head: 0 pcs. Number of spindles horizontal drilling head: 0 pcs. Number of tools: 39 pcs. Extraction nozzle diameter: 2x 250 mm Number of milling units: 2 pcs. Year of manufacture: 2022 Speed: 18,000 / 24,000 rpm Compressed air connection: 7 bar Motor power: 16.5 / 19.2 kW Pump capacity: 250 m³/h Control system: BH660 Nljdpfxsxf Dwzj Agxoa CNC Machining Centre BIESSE Rover B 1967 – BRAND NEW / STOCK MACHINE in original packaging! Working area: X = 6735 mm Y = 1930 mm Z = 245 mm with modules H = 74 mm Z = 290 mm with modules H = 29 mm (milling operation) Workpiece pass-through in Y: 1930 mm, with a thickness up to 60 mm on modules H = 74 mm; 1880 mm, with a thickness over 60 mm on modules H = 74 mm. Double-Y axis for 5-axis and 4-axis spindle (enables tool change during hidden time) Safety system with bumper and light barriers – 3-sided safety enclosure Uninterruptible power supply (UPS) 10 traverses – 30 base carriages Multiple clamping area automatic table positioning FPS HyperClamp clamping system 3 alignment rows 8 loading aids 250 m³/h vacuum pump Chip conveyor belt 5-axis spindle with 16.5 kW – 18,000 rpm Deflector preparation Unit interface 4-axis spindle with 19.2 kW PeakPower – 24,000 rpm C-axis separate Y-axis for 5-axis and 4-axis no drilling head! Turret changer travelling with 4-axis, with 8 positions Front turret changer for 5-axis, with 8 positions Saw pickup front for 5-axis Chain changer rear with 22 positions (Photo is for illustration purposes only!) BRAND NEW MACHINE IN ORIGINAL PACKAGING! Full manufacturer’s warranty! Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Nodpfx Ajv Aacfogxela Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 Nsdpfx Askvrxuegxola * Nominal payload: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working range on X-axis: 3228 mm Working range on Y-axis: 1580 mm Working range on Z-axis: 200 mm with suction cups H74 mm Working range on Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support bars Njdpjugpwnefx Agxola Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for the bar Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm Automatic 16-position tool changer on X-axis carriage Independent Tesa BH17 drilling spindles arranged as follows: No. 5 independent spindles for vertical drilling in “X” direction No. 5 independent spindles for vertical drilling in “Y” direction No. 4 spindles for horizontal drilling in “X” direction No. 2 spindles for horizontal drilling in “Y” direction No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum processable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and rigidity: * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum dimensions of the edged panel: 300 x 300 mm Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Double-position edge magazine in protective housing for edges up to max. 65 mm thickness Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle No. 1 rounding/chamfering unit for edges No. 1 EF60A combination trimming/scraping unit Perimeter safety fence Chip extraction system with motorised belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. bSolid - 3-axis machining. bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Nledpjw D E A Esfx Agxoa Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Njdpsxraimofx Agxjla Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Stroj za obdelavo robov iz leta 2008. BIESSE Edge Stream B1 je opremljen z obsežnim kompletom orodij, ki vključuje PU-lepilno enoto, predrezalno enoto, rezalnik robov in enoto za fino rezkanje. Poleg tega ima stroje za zaobljenje robov, potezne nože za robove, nihajne ščetke in grelec za robove. Če iščete visokokakovostne možnosti obdelave robov, priporočamo stroj BIESSE Edge Stream B1, ki ga imamo na voljo za prodajo. Za več podrobnosti nas kontaktirajte. • Sistem za pršenje tekočin (ADZ) Njdsyw Nu Eepfx Agxsla • Predrezalna enota (RT) • PU-lepilna enota (SP10, Nordson) • Rezalnik robov (IT90) • Uravnoteženi rezkalnik orodja (RS10) • Fina rezkalna enota (RF40) • Enota za zaobljenje (AR60) • Odstranjevalec robov (RB40) • Enota za odstranjevanje lepila (RC20) • Nihajne ščetke • Grelec za robove (PH10)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 1000012445, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.600 mm, pomik osi Y: 1.800 mm, skupna masa: 4.000 kg, TECHNIČNI PODATKI Delovno območje X-os: 3.600 mm Delovno območje Y-os: 1.800 mm Število delovnih polj: 2 Pozicije za menjavo orodja na hrbtni strani: 16 Pozicije za menjavo orodja na stroju: 8 Vakuumska črpalka: 250 m³/h Vrtalna glava BH 10 z razporeditvijo: 15 vertikalnih vreten na osi X 17 vertikalnih vreten na osi Y Nlsdpfx Aoydk Aisgxsa PODROBNOSTI O STROJU Moč elektrovretena: 13,2 kW Tip elektrovretena: ISO 30 Krmiljenje: numerično krmiljenje s programsko opremo B-Solid Teža: 4.000 kg OPREMA Nesting delovna miza Avtomatski nakladalni sistem s stransko dvižno mizo Sistem za tiskanje etiket z avtomatsko aplikacijo na nakladalni mizi Sistem za razrez plošč s priseski Avtomatski razkladalni sistem z motoriziranim trakom Sistem za čiščenje delovne mize Zaščitni in varnostni sistem z ograjo Varnostni sistem z odbojniki Avtomatski mazalni sistem Klimatski sistem za hlajenje in čiščenje krmiljenja stroja

Stanje: rabljeno, Numerical control NC 1000, software: Biesse Works. Working area on X-axis: 3685 mm; working area on Y-axis: 1290 mm; Z-axis stroke: 200 mm; component passage height: 70 mm. FT full plane nesting worktable. Automatic loading system with side lifting table. 1 vertical electrospindle with automatic tool change. Automatic tool changer with 18 positions, located at the rear of the machine. Drilling head with independent spindles arranged as follows: 7 vertical on X-axis, 7 vertical on Y-axis, 2 horizontal on X-axis, 2 horizontal on Y-axis. Automatic unloading system with motorized belt. Front safety and protection system with mats and limit nets. Automatic lubrication system. Air conditioning for the control panel. Vacuum pumps. TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE. Nodpfx Agowufv Tsxjla

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 5.900 mm, pomik osi Y: 1.560 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 60 m/min, največja hitrost vrtenja: 20.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X direction): 6 Horizontal drilling spindles (Y direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Nlodpfx Aoyxm Swogxea Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Prodajam 4 stroje CNC ROVER BIESSE 2231. Letniki: 2013, 2014, 2015, 2016. V zelo dobrem stanju. Nedox Tbk Repfx Agxola

Stanje: rabljeno, Leto izdelave: 1997, vhodna napetost: 380 V, vhodni tok: 20 A, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 3.250 mm, pomik osi Y: 1.325 mm, pomik po osi Z: 115 mm, število osi: 3, število mest v zalogovniku orodij: 5, Vertikalna vretena: 31 kosov (19 v smeri Y-osi in 12 v smeri X-osi) Nlodpjy Azu Ijfx Agxsa Horizontalna vretena: 8 kosov Žaga: 1 kos Število vpenjal za orodja: 5 Vakumska črpalka: 100 m³/h

Stanje: rabljeno, številka stroja/vozila: 008480, Delovno območje os X: 4600 mm Delovno območje os Y: 1935 mm Delovna površina: S konzolami z vakuumskim prijemom Moč glavnega vretena: 18 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 31 Število orodnih mest: 58 Njdpfsy Edqksx Agxola